Re: [PATCH v3 4/4] iio: ad5755: Add full DT binding documentation

[Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On 18/02/16 14:37, Rob Herring wrote:
> On Tue, Feb 16, 2016 at 03:25:57PM +0100, Sean Nyekjaer wrote:
>> Signed-off-by: Sean Nyekjaer <sean.nyekjaer-rjjw5hvvQKZaa/9Udqfwiw@public.gmane.org>
>> ---
>> Changes since v2:
>>  - Removed defines, alot easier to read :-)
>>
>>  .../devicetree/bindings/iio/dac/ad5755.txt         | 94 ++++++++++++++++++++++
>>  1 file changed, 94 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
>> index 4c91583..751204b 100644
>> --- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt
>> +++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
>> @@ -15,10 +15,104 @@ Recommended properties:
>>   - spi-max-frequency: Definition as per
>>  		Documentation/devicetree/bindings/spi/spi-bus.txt
>>  
>> +Optional properties:
>> +See include/dt-bindings/iio/ad5755.h
>> + - adi,ext_dc_dc_compenstation_resistor: boolean set if the hardware have an
> 
> Use - instead of _ in property names.
> 
>> +					 external resistor and thereby bypasses
>> +					 the internal compensation resistor.
>> + - adi,dc_dc_phase:
>> +	Valid values for DC DC Phase control is:
>> +	0: All dc-to-dc converters clock on the same edge.
>> +	1: Channel A and Channel B clock on the same edge,
>> +	   Channel C and Channel D clock on opposite edges.
>> +	2: Channel A and Channel C clock on the same edge,
>> +	   Channel B and Channel D clock on opposite edges.
>> +	3: Channel A, Channel B, Channel C, and Channel D
>> +	   clock 90 degrees out of phase from each other.
>> + - adi,dc_dc_freq:
>> +	Valid values for DC DC frequency is:
>> +	0: 250 kHz.
>> +	1: 410 kHz.
>> +	2: 650 kHz.
> 
> It is preferrable to make the values the actual units rather than 
> register values. Then we can have common properties. Is this a common 
> property of a DAC?
Not overly common (in the parts we have seen in IIO so far),
but best to allow for it becoming a general property in the future
and actual units definitely the way to go. 
> 
>> + - adi,dc_dc_maxv:
>> +	Valid values for the maximum allowed Vboost voltage supplied by
>> +	the dc-to-dc converter is:
>> +	0: 23 V.
>> +	1: 24.5 V.
>> +	2: 27 V.
>> +	3: 29.5 V.
> 
> Same here.
> 
> Rob
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>