From: xuejiancheng <xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
yanhaifeng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
yanghongwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
suwenping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
raojun-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
ml.yang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
gaofei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhangzhenxing-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
xuejiancheng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
lidongpo-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org
Subject: Re: [PATCH v9 2/6] clk: hisilicon: add CRG driver for hi3519 soc
Date: Fri, 26 Feb 2016 09:54:25 +0800 [thread overview]
Message-ID: <56CFB051.3050809@huawei.com> (raw)
In-Reply-To: <20160225234215.GK28849-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Hi Stephen,
Thank you for your advice. I'll fixed them in next version.
Regards,
Jiancheng.
On 2016/2/26 7:42, Stephen Boyd wrote:
> On 02/22, Jiancheng Xue wrote:
>> diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
>> new file mode 100644
>> index 0000000..2d23950
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/hi3519-crg.txt
>> @@ -0,0 +1,46 @@
>> +Example: CRG nodes
>> +CRG: clock-reset-controller@12010000 {
>> + compatible = "hisilicon,hi3519-crg";
>
> Indentation is off here.
>
>> + reg = <0x12010000 0x10000>;
>> + #clock-cells = <1>;
>> + #reset-cells = <2>;
>> +};
>> +
>> +Example: consumer nodes
>> +i2c0: i2c@12110000 {
>> + compatible = "hisilicon,hi3519-i2c";
>> + reg = <0x12110000 0x1000>;
>> + clocks = <&CRG HI3519_I2C0_RST>;*/
>> + resets = <&CRG 0xe4 0>;
>> +};
>> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
>> index e434854..296371f 100644
>> --- a/drivers/clk/hisilicon/Kconfig
>> +++ b/drivers/clk/hisilicon/Kconfig
>> @@ -1,3 +1,11 @@
>> +config COMMON_CLK_HI3519
>> + tristate "Hi3519 Clock Driver"
>> + depends on ARCH_HISI || COMPILE_TEST
>> + select RESET_HISI
>> + default y
>
> default ARCH_HISI
>
>> + help
>> + Build the clock driver for hi3519.
>> +
>> diff --git a/drivers/clk/hisilicon/reset.c b/drivers/clk/hisilicon/reset.c
>> new file mode 100644
>> index 0000000..50e00e7
>> --- /dev/null
>> +++ b/drivers/clk/hisilicon/reset.c
>> +
>> +int hisi_reset_init(struct device_node *np)
>> +{
>> + struct hisi_reset_controller *rstc;
>> +
>> + rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
>> + if (!rstc)
>> + return -ENOMEM;
>> +
>> + rstc->membase = of_iomap(np, 0);
>
> Any reason why we can't pass the platform device here and map the
> register space with platform device APIs?
>
>> + if (!rstc->membase)
>> + return -EINVAL;
>> +
>> + spin_lock_init(&rstc->lock);
>> +
>> + rstc->rcdev.owner = THIS_MODULE;
>> + rstc->rcdev.ops = &hisi_reset_ops;
>> + rstc->rcdev.of_node = np;
>> + rstc->rcdev.of_reset_n_cells = 2;
>> + rstc->rcdev.of_xlate = hisi_reset_of_xlate;
>> +
>> + return reset_controller_register(&rstc->rcdev);
>> +}
>> +EXPORT_SYMBOL(hisi_reset_init);
>
> Why not GPL?
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-02-26 1:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-22 7:47 [PATCH v9 0/6] ARM: hisi: Add initial support including clock driver for Hi3519 soc Jiancheng Xue
2016-02-22 7:47 ` [PATCH v9 1/6] clk: hisilicon: export some hisilicon APIs to modules Jiancheng Xue
2016-02-25 23:42 ` Stephen Boyd
2016-02-22 7:47 ` [PATCH v9 2/6] clk: hisilicon: add CRG driver for hi3519 soc Jiancheng Xue
2016-02-22 10:01 ` kbuild test robot
2016-02-23 1:25 ` xuejiancheng
2016-02-23 9:14 ` Philipp Zabel
2016-02-25 23:42 ` Stephen Boyd
[not found] ` <20160225234215.GK28849-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-02-26 1:54 ` xuejiancheng [this message]
2016-02-26 2:17 ` xuejiancheng
2016-02-22 7:47 ` [PATCH v9 3/6] ARM: hisi: add compatible string for Hi3519 soc Jiancheng Xue
2016-02-22 7:47 ` [PATCH v9 4/6] ARM: debug: add hi3519 debug uart Jiancheng Xue
2016-02-22 7:47 ` [PATCH v9 5/6] ARM: dt-bindings: add device tree bindings for Hi3519 sysctrl Jiancheng Xue
[not found] ` <1456127280-23275-1-git-send-email-xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2016-02-22 7:48 ` [PATCH v9 6/6] ARM: dts: add dts files for Hi3519 Jiancheng Xue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CFB051.3050809@huawei.com \
--to=xuejiancheng-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=gaofei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lidongpo-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=ml.yang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=raojun-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=suwenping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=xuejiancheng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=yanghongwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=yanhaifeng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=zhangzhenxing-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).