Re: [RESEND PATCH v5 2/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan

[Adrian Hunter <adrian.hunter@intel.com>]

On 04/03/16 12:24, Shawn Lin wrote:
> Hi Adrian,
> 
> On 2016/3/4 17:14, Adrian Hunter wrote:
>> On 19/02/16 04:20, Shawn Lin wrote:
>>> This patch adds Generic PHY access for sdhci-of-arasan. Driver
> 
> [...]
> 
>>>   /**
>>>    * sdhci_arasan_suspend - Suspend method for the driver
>>>    * @dev:    Address of the device structure
>>> - * Returns 0 on success and error value on error
>>> + * Return: 0 on success and error value on error
>>
>> Really should be a separate patch for the comment fixes.
> 
> yep, I won't touch it when I rebase my patch for this topic.
> 
>>
>>>    *
>>>    * Put the device in a low power state.
>>>    */
>>> @@ -88,6 +91,14 @@ static int sdhci_arasan_suspend(struct device *dev)
>>>       if (ret)
>>>           return ret;
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        ret = phy_power_off(sdhci_arasan->phy);
>>> +        if (ret) {
>>> +            dev_err(dev, "Cannot power off phy.\n");
>>
>> I would expect you ought to call sdhci_resume_host() here.
> 
> oh, got it.
> 
>>
>>> +            return ret;
>>> +        }
>>> +    }
>>> +
>>>       clk_disable(pltfm_host->clk);
>>>       clk_disable(sdhci_arasan->clk_ahb);
>>>
>>> @@ -97,7 +108,7 @@ static int sdhci_arasan_suspend(struct device *dev)
>>>   /**
>>>    * sdhci_arasan_resume - Resume method for the driver
>>>    * @dev:    Address of the device structure
>>> - * Returns 0 on success and error value on error
>>> + * Return: 0 on success and error value on error
>>>    *
>>>    * Resume operation after suspend
>>>    */
>>> @@ -118,11 +129,24 @@ static int sdhci_arasan_resume(struct device *dev)
>>>       ret = clk_enable(pltfm_host->clk);
>>>       if (ret) {
>>>           dev_err(dev, "Cannot enable SD clock.\n");
>>> -        clk_disable(sdhci_arasan->clk_ahb);
>>> -        return ret;
>>> +        goto err_clk_en;
>>> +    }
>>> +
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        ret = phy_power_on(sdhci_arasan->phy);
>>> +        if (ret) {
>>> +            dev_err(dev, "Cannot power on phy.\n");
>>> +            goto err_phy_power;
>>> +        }
>>>       }
>>>
>>>       return sdhci_resume_host(host);
>>> +
>>> +err_phy_power:
>>> +    clk_disable(pltfm_host->clk);
>>> +err_clk_en:
>>> +    clk_disable(sdhci_arasan->clk_ahb);
>>
>> I don't know that disabling clocks is necessarily the right thing to do if
>> the resume fails.  You might want to consider what happens if the system
>> tries to use the device when it is in that state.  It's been a long time
>> since I did any ARM work but aren't you risking bus errors.  Might just as
>> well not bother and save a few lines of code.
>>
> 
> Firstly, I really just follow the orginal err handle.
> It's risking bus errors if disabling ahb clk, but ahb clk is most very
> likely to shared by many controllers. So regarding to the clk reference
> count, the ahb_clk is not *really* disabled and just decrease the
> reference count. How about keep these handles here?

I would remove the error handling on the grounds that it does not do
anything useful.

> 
> 
>>> +    return ret;
>>>   }
>>>   #endif /* ! CONFIG_PM_SLEEP */
>>>
>>> @@ -183,6 +207,30 @@ static int sdhci_arasan_probe(struct platform_device
>>> *pdev)
>>>           goto clk_disable_all;
>>>       }
>>>
>>> +    sdhci_arasan->phy = ERR_PTR(-ENODEV);
>>> +    if (of_device_is_compatible(pdev->dev.of_node,
>>> +                    "arasan,sdhci-5.1")) {
>>> +        sdhci_arasan->phy = devm_phy_get(&pdev->dev,
>>> +                         "phy_arasan");
>>> +        if (IS_ERR(sdhci_arasan->phy)) {
>>> +            ret = PTR_ERR(sdhci_arasan->phy);
>>> +            dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
>>> +            goto clk_disable_all;
>>> +        }
>>> +
>>> +        ret = phy_init(sdhci_arasan->phy);
>>> +        if (ret < 0) {
>>> +            dev_err(&pdev->dev, "phy_init err.\n");
>>> +            goto clk_disable_all;
>>> +        }
>>> +
>>> +        ret = phy_power_on(sdhci_arasan->phy);
>>> +        if (ret < 0) {
>>> +            dev_err(&pdev->dev, "phy_power_on err.\n");
>>> +            goto err_phy_power;
>>> +        }
>>> +    }
>>> +
>>>       ret = sdhci_add_host(host);
>>>       if (ret)
>>>           goto err_pltfm_free;
>>> @@ -190,7 +238,12 @@ static int sdhci_arasan_probe(struct platform_device
>>> *pdev)
>>>       return 0;
>>>
>>>   err_pltfm_free:
>>> +    if (!IS_ERR(sdhci_arasan->phy))
>>> +        phy_power_off(sdhci_arasan->phy);
>>>       sdhci_pltfm_free(pdev);
>>> +err_phy_power:
>>> +    if (!IS_ERR(sdhci_arasan->phy))
>>
>> Looks like you are using sdhci_arasan after it has been free'd by
>> sdhci_pltfm_free().
>>
>> Also there seem to be cases where sdhci_arasan_probe() can exit after
>> sdhci_pltfm_init() without calling sdhci_pltfm_free().
> 
> Good catch, will fix it.
> 
>>
>>> +        phy_exit(sdhci_arasan->phy);
>>>   clk_disable_all:
>>>       clk_disable_unprepare(clk_xin);
>>>   clk_dis_ahb:
>>> @@ -205,6 +258,11 @@ static int sdhci_arasan_remove(struct
>>> platform_device *pdev)
>>>       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>>       struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        phy_power_off(sdhci_arasan->phy);
>>> +        phy_exit(sdhci_arasan->phy);
>>> +    }
>>> +
>>
>> When you re-base, take care to keep this chunk above
>> sdhci_pltfm_unregister().
> 
> sure.
> 
> Thanks for reviewing it.
> 
>>
>>>       clk_disable_unprepare(sdhci_arasan->clk_ahb);
>>>
>>>       return sdhci_pltfm_unregister(pdev);
>>>
>>
>>
>>
>>
> 
>