devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
To: Simon Horman <horms@verge.net.au>,
	Dirk Behme <dirk.behme@gmail.com>,
	Magnus Damm <magnus.damm@gmail.com>
Cc: SH-Linux <linux-sh@vger.kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	Gaku Inami <gaku.inami.xw@bp.renesas.com>,
	Takeshi Kihara <takeshi.kihara.df@renesas.com>,
	Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>,
	Toru Oishi <toru.oishi.zj@rvc.renesas.com>
Subject: Re: [PATCH 2/3] arm64: dts: r8a7795: Add Cortex-A57 CPU cores
Date: Wed, 16 Mar 2016 10:45:10 +0700	[thread overview]
Message-ID: <56E8D6C6.2000306@rvc.renesas.com> (raw)
In-Reply-To: <20160316011901.GB23687@verge.net.au>

Hi Simon, Dirk, Magnus,

On 3/16/2016 8:19 AM, Simon Horman wrote:
> Hi Dirk,
>
> On Tue, Dec 15, 2015 at 09:48:46AM +0100, Dirk Behme wrote:
>> On 15.12.2015 09:38, Magnus Damm wrote:
>>> Hi Simon,
>>>
>>> On Sat, Dec 12, 2015 at 8:07 AM, Simon Horman <horms@verge.net.au> wrote:
>>>> On Fri, Dec 04, 2015 at 02:38:52PM +0100, Dirk Behme wrote:
>>>>> From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>>>
>>>>> Add Cortex-A57 CPU cores to r8a7795 SoC for a total of 4 x Cortex-A57.
>>>>>
>>>>> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
>>>>> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>>>>> Sigend-off-by: Dirk Behme <dirk.behme@gmail.com>
>>>>
>>>> Thanks, I have queued this up for v4.5.
>>>
>>> Thanks. May I ask if CPU hotplug is known to work?
>>
>>
>> I didn't test that.
>
> As a follow-up I am wondering if you subsequently observed CPU hotplug
> working. My recent testing on v4.5 indicates that it isn't working in my
> environment. It would be quite valuable to know if it has ever been known
> to work.
>
>>> Also, which version
>>> of the boot loader stack is required?

Yes. CPUHotplug will be supported in boot loader stack released by Dec 
2015 and later.

>>
>> I've the U-Boot / boot loader stack from BSP v3.0.2 on the board. I haven't
>> tested v3.0.3, yet.
>
> For reference my environment is as follows:
>
>
>      NOTICE:  BL2: R-Car H3 Loader Rev.1.0.1
>      NOTICE:  BL2: DDR1600(rev.0.10)
>      NOTICE:  BL2: DRAM Split is 4ch
>      NOTICE:  BL2: QoS is Gfx Oriented(rev.0.24A)
>      NOTICE:  BL2: v1.1(release):41099f4
>      NOTICE:  BL2: Built : 11:47:26, Nov 19 2015
>      NOTICE:  BL2: Normal boot
>      NOTICE:  BL2: memdrv_block_read dst=0xe630e0b0 src=0x8180000 len=36(0x24)
>      NOTICE:  BL2: memdrv_block_read dst=0x43f00000 src=0x8180400 len=3072(0xc00)
>      NOTICE:  BL2: memdrv_block_read dst=0x44000000 src=0x81c0000 len=65536(0x10000)
>      NOTICE:  BL2: memdrv_block_read dst=0x44100000 src=0x8200000 len=524288(0x80000)
>      NOTICE:  BL2: memdrv_block_read dst=0x49000000 src=0x8640000 len=1048576(0x100000)
>
>      U-Boot 2015.04 (Nov 19 2015 - 11:47:49)
>
>      CPU: Renesas Electronics CPU rev 1.0
>      Board: Salvator-X
>      DRAM:  896 MiB
>      MMC:   sh-sdhi: 0, sh-sdhi: 1, sh-sdhi: 2
>      In:    serial
>      Out:   serial
>      Err:   serial
>      Net:   ravb
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
Best regards,
KHIEM Nguyen

  reply	other threads:[~2016-03-16  3:45 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-04 13:38 [PATCH 1/3] arm64: dts: r8a7795: Add PSCI node Dirk Behme
2015-12-04 13:38 ` [PATCH 2/3] arm64: dts: r8a7795: Add Cortex-A57 CPU cores Dirk Behme
2015-12-11 23:07   ` Simon Horman
2015-12-15  5:12     ` Simon Horman
2015-12-15  6:31       ` Dirk Behme
2015-12-15  8:23       ` Geert Uytterhoeven
2015-12-15  8:38     ` Magnus Damm
2015-12-15  8:48       ` Dirk Behme
2015-12-15  8:55         ` Magnus Damm
2016-03-16  1:19         ` Simon Horman
2016-03-16  3:45           ` Khiem Nguyen [this message]
2016-03-16  5:36             ` Simon Horman
2015-12-04 13:38 ` [PATCH 3/3] arm64: dts: r8a7795: Add pmu device nodes Dirk Behme
2015-12-11 23:07   ` Simon Horman
     [not found]   ` <1449236333-4410-3-git-send-email-dirk.behme-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-14 14:36     ` Sudeep Holla
2015-12-15  8:33       ` Geert Uytterhoeven
2015-12-15  9:50         ` Sudeep Holla
2015-12-11 23:07 ` [PATCH 1/3] arm64: dts: r8a7795: Add PSCI node Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56E8D6C6.2000306@rvc.renesas.com \
    --to=khiem.nguyen.xt@rvc.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dirk.behme@gmail.com \
    --cc=gaku.inami.xw@bp.renesas.com \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=takeshi.kihara.df@renesas.com \
    --cc=toru.oishi.zj@rvc.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).