From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?Andreas_F=c3=a4rber?= Subject: Re: [PATCH v2 0/6] ARM64: meson: GXBaby (S905) and Vega S95 enablement Date: Tue, 22 Mar 2016 21:29:26 +0100 Message-ID: <56F1AB26.8050200@suse.de> References: <1456886101-22967-1-git-send-email-afaerber@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Kevin Hilman Cc: linux-meson , Carlo Caione , linux-arm-kernel , Matthias Brugger , Nicolas Saenz , =?UTF-8?Q?Andr=c3=a9_Przywara?= , Sudeep Holla , devicetree , Catalin Marinas , Will Deacon , LKML , Mark Rutland List-Id: devicetree@vger.kernel.org Am 21.03.2016 um 23:36 schrieb Kevin Hilman: > On Tue, Mar 1, 2016 at 6:34 PM, Andreas F=C3=A4rber wrote: >=20 >> Note: On the Vega S95 I need to change TEXT_OFFSET as follows, >> in order to avoid the vendor U-Boot overwriting itself (fwiu); >> for the Mini Mx that's reportedly not necessary. >=20 > FYI, the Amlogic P200 dev board also needs this hack with the factory= u-boot. I have meanwhile found that mkimage -A arm64 -O linux -T kernel -C none -a 0x1080000 -e 0x1080000 \ -n linux-next -d arch/arm64/boot/Image ../uImage and then using bootm instead of booti works even without the above hack on the Vega S95. Not a satisfactory solution yet, but better than patching the kernel in a distro-incompatible way. Regards, Andreas --=20 SUSE Linux GmbH, Maxfeldstr. 5, 90409 N=C3=BCrnberg, Germany GF: Felix Imend=C3=B6rffer, Jane Smithard, Graham Norton; HRB 21284 (AG= N=C3=BCrnberg) -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html