From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Kandagatla Subject: Re: [PATCH 00/12] ARM: dts: Add dragonboard-600c support. Date: Tue, 29 Mar 2016 16:02:43 +0100 Message-ID: <56FA9913.7040308@linaro.org> References: <1458762366-9233-1-git-send-email-srinivas.kandagatla@linaro.org> <20160329145448.GP8929@tuxbot> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20160329145448.GP8929@tuxbot> Sender: linux-arm-msm-owner@vger.kernel.org To: Bjorn Andersson Cc: Andy Gross , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org List-Id: devicetree@vger.kernel.org On 29/03/16 15:54, Bjorn Andersson wrote: > On Wed 23 Mar 12:46 PDT 2016, Srinivas Kandagatla wrote: > >> Hi Andy, >> >> This patchset adds support to Dragonboard 600c which is based on APQ8064. >> >> With this patchset, except spi I was able to test all the below features >> on this board on top of linus master branch. >> 1> i2c >> 2> spi >> 3> sd/mmc with card detect >> 4> eMMC >> 5> USB >> 6> SATA >> 7> on board Ethernet based on PCIE. >> 8> user and activity leds. >> >> AHCI SATA is broken on APQ8064 on mainline, due to changes in libahci, fix is >> being discussed which should not effect this dt patches anyway. >> This patchset also has a fix to i2c/spi pinctrls which was not set correctly >> in my previous apq8064 patches, I have verified this patchset with eeprom and >> sensors on the board, you might want to take that patch in next rc. >> >> Thanks, >> srini >> >> Srinivas Kandagatla (12): >> ARM: dts: apq8064: fix the pinctrls for i2c and spi >> ARM: dts: apq8064: add support to gsbi1 uart >> ARM: dts: apq8064: add gsbi7 i2c support >> ARM: dts: dragonboard-600c: add board support with serial >> ARM: dts: dragonboard-600c: add pmic regulator supplies >> ARM: dts: dragonboard-600c: Add eMMC and SD card support >> ARM: dts: dragonboard-600c: add usb support >> ARM: dts: dragonboard-600c: add pcie support >> ARM: dts: dragonboard-600c: add on board sata support. >> ARM: dts: dragonboard-600c: Add on board leds support >> ARM: dts: dragonboard-600c: add i2c support >> ARM: dts: dragonboard-600c: add spi support > > Please abbreviate db600c (and drop those upper case As). Yep. Will do. > >> >> arch/arm/boot/dts/Makefile | 1 + >> .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 377 +++++++++++++++++++++ > > Please make this qcom-apq8064-arrow-db600c.dts Ok, makes sense. thanks srini > >> arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 39 +++ >> arch/arm/boot/dts/qcom-apq8064.dtsi | 41 ++- >> 4 files changed, 452 insertions(+), 6 deletions(-) >> create mode 100644 arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > > Regards, > Bjorn >