[PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000

[PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000

[Melody Olvera]

This series adds the base device tree files and DTS support for the
Qualcomm QDU1000 and QRU1000 IDP SoCs, including the clocks, tlmm, smmu,
regulators, mmc, interconnects, cpufreq, and qup. 

This patchset is based off of [1] which adds support for the PMIC arb used
on these SoCs.

The Qualcomm Technologies, Inc. Distributed Unit 1000 and Radio Unit
1000 are new SoCs meant for enabling Open RAN solutions. See more at
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/qualcomm_5g_ran_platforms_product_brief.pdf

[1] https://lore.kernel.org/all/20220914165212.3705892-3-vkoul@kernel.org/

Melody Olvera (3):
  dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
  arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
  arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

 .../devicetree/bindings/arm/qcom.yaml         |   16 +
 arch/arm64/boot/dts/qcom/Makefile             |    2 +
 arch/arm64/boot/dts/qcom/qdu1000-idp.dts      |  230 +++
 arch/arm64/boot/dts/qcom/qdu1000.dtsi         | 1646 +++++++++++++++++
 arch/arm64/boot/dts/qcom/qru1000-idp.dts      |  230 +++
 arch/arm64/boot/dts/qcom/qru1000.dtsi         |   27 +
 6 files changed, 2151 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi


base-commit: dca0a0385a4963145593ba417e1417af88a7c18d
prerequisite-patch-id: 5e7a02607aecd3f5346a2f450982601cf6935e54
-- 
2.38.0

[PATCH v2 1/3] dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards

[Melody Olvera]

Document the QDU1000 and QRU1000 SoC bindings and the boards that use
them.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 1b5ac6b02bc5..3370a50644a6 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -40,6 +40,8 @@ description: |
         msm8996
         msm8998
         qcs404
+        qdu1000
+        qru1000
         sa8155p
         sa8540p
         sc7180
@@ -76,6 +78,7 @@ description: |
         mtp
         qrd
         sbc
+        x100
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -493,6 +496,19 @@ properties:
           - const: google,pompom-sku0
           - const: qcom,sc7180
 
+      - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
+          - items:
+              - enum:
+                  - qcom,qdu1000-idp
+                  - qcom,qdu1000-x100
+              - const: qcom,qdu1000
+
+      - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
+          - items:
+              - enum:
+                  -qcom,qru1000-idp
+              - const: qcom,qru1000
+
       - description: Google Quackingstick (newest rev)
         items:
           - const: google,quackingstick-sku1537
-- 
2.38.0

Re: [PATCH v2 1/3] dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards

[Krzysztof Kozlowski]

On 14/10/2022 18:11, Melody Olvera wrote:
> Document the QDU1000 and QRU1000 SoC bindings and the boards that use
> them.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 1b5ac6b02bc5..3370a50644a6 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -40,6 +40,8 @@ description: |
>          msm8996
>          msm8998
>          qcs404
> +        qdu1000
> +        qru1000
>          sa8155p
>          sa8540p
>          sc7180
> @@ -76,6 +78,7 @@ description: |
>          mtp
>          qrd
>          sbc
> +        x100
>  
>    The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
>    where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
> @@ -493,6 +496,19 @@ properties:
>            - const: google,pompom-sku0
>            - const: qcom,sc7180
>  
> +      - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
> +          - items:
> +              - enum:
> +                  - qcom,qdu1000-idp
> +                  - qcom,qdu1000-x100
> +              - const: qcom,qdu1000
> +
> +      - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
> +          - items:
> +              - enum:
> +                  -qcom,qru1000-idp
> +              - const: qcom,qru1000

This is still wrong order. All entries are ordered by SoC compatible. So
this should go before sc7180, not after.

> +
>        - description: Google Quackingstick (newest rev)
>          items:
>            - const: google,quackingstick-sku1537

Best regards,
Krzysztof

Re: [PATCH v2 1/3] dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards

[Rob Herring]

On Fri, 14 Oct 2022 15:11:36 -0700, Melody Olvera wrote:
> Document the QDU1000 and QRU1000 SoC bindings and the boards that use
> them.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/arm/qcom.yaml:496:18: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/arm/qcom.example.dts'
Documentation/devicetree/bindings/arm/qcom.yaml:496:18: mapping values are not allowed in this context
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/arm/qcom.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/arm/qcom.yaml:496:18: mapping values are not allowed in this context
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/qcom.yaml: ignoring, error parsing file
make: *** [Makefile:1420: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

[PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
 2 files changed, 1673 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
new file mode 100644
index 000000000000..777734b30f56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -0,0 +1,1646 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,qdu1000.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen: chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			power-domain-names = "psci";
+			power-domains = <&CPU_PD0>;
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+			      compatible = "cache";
+			      next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		CPU_OFF: cpu-sleep-0 {
+			compatible = "arm,idle-state";
+			idle-state-name = "rail-pc";
+			entry-latency-us = <274>;
+			exit-latency-us = <480>;
+			min-residency-us = <3934>;
+			arm,psci-suspend-param = <0x40000004>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			idle-state-name = "cluster-l3-off";
+			entry-latency-us = <584>;
+			exit-latency-us = <2332>;
+			min-residency-us = <6118>;
+			arm,psci-suspend-param = <0x41000044>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			idle-state-name = "cluster-power-collapse";
+			entry-latency-us = <2893>;
+			exit-latency-us = <4023>;
+			min-residency-us = <9987>;
+			arm,psci-suspend-param = <0x41003344>;
+		};
+	};
+
+	firmware {
+		qcom_scm {
+			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu-pd0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD1: cpu-pd1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD2: cpu-pd2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD3: cpu-pd3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CLUSTER_PD: cluster-pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			no-map;
+			reg = <0x0 0x80000000 0x0 0x600000>;
+		};
+
+		xbl_dt_log_mem: memory@80600000 {
+			no-map;
+			reg = <0x0 0x80600000 0x0 0x40000>;
+		};
+
+		xbl_ramdump_mem: memory@80640000 {
+			no-map;
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+		};
+
+		aop_image_mem: memory@80800000 {
+			no-map;
+			reg = <0x0 0x80800000 0x0 0x60000>;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			no-map;
+			reg = <0x0 0x80860000 0x0 0x20000>;
+		};
+
+		aop_config_mem: memory@80880000 {
+			no-map;
+			reg = <0x0 0x80880000 0x0 0x20000>;
+		};
+
+		tme_crash_dump_mem: memory@808a0000 {
+			no-map;
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+		};
+
+		tme_log_mem: memory@808e0000 {
+			no-map;
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+		};
+
+		uefi_log_mem: memory@808e4000 {
+			no-map;
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+		};
+
+		/* secdata region can be reused by apps */
+
+		smem_mem: memory@80900000 {
+			compatible = "qcom,smem";
+			no-map;
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			no-map;
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+		};
+
+		xbl_sc_mem: memory@80c00000 {
+			no-map;
+			reg = <0x0 0x80c00000 0x0 0x40000>;
+		};
+
+		/* uefi region can be reused by apps */
+
+		tz_stat_mem: memory@81d00000 {
+			no-map;
+			reg = <0x0 0x81d00000 0x0 0x100000>;
+		};
+
+		tags_mem: memory@81e00000 {
+			no-map;
+			reg = <0x0 0x81e00000 0x0 0x500000>;
+		};
+
+		qtee_mem: memory@82300000 {
+			no-map;
+			reg = <0x0 0x82300000 0x0 0x500000>;
+		};
+
+		ta_mem: memory@82800000 {
+			no-map;
+			reg = <0x0 0x82800000 0x0 0xa00000>;
+		};
+
+		fs1_mem: memory@83200000 {
+			no-map;
+			reg = <0x0 0x83200000 0x0 0x400000>;
+		};
+
+		fs2_mem: memory@83600000 {
+			no-map;
+			reg = <0x0 0x83600000 0x0 0x400000>;
+		};
+
+		fs3_mem: memory@83a00000 {
+			no-map;
+			reg = <0x0 0x83a00000 0x0 0x400000>;
+		};
+
+		/* Linux kernel image is loaded at 0x83e00000 */
+
+		ipa_fw_mem: memory@8be00000 {
+			no-map;
+			reg = <0x0 0x8be00000 0x0 0x10000>;
+		};
+
+		ipa_gsi_mem: memory@8be10000 {
+			no-map;
+			reg = <0x0 0x8be10000 0x0 0x14000>;
+		};
+
+		mpss_mem: memory@8c000000 {
+			no-map;
+			reg = <0x0 0x8c000000 0x0 0x12c00000>;
+		};
+
+		q6_mpss_dtb_mem: memory@9ec00000 {
+			no-map;
+			reg = <0x0 0x9ec00000 0x0 0x80000>;
+		};
+
+		tenx_mem: memory@a0000000 {
+			no-map;
+			reg = <0x0 0xa0000000 0x0 0x19600000>;
+		};
+
+		oem_tenx_mem: memory@b9600000 {
+			no-map;
+			reg = <0x0 0xb9600000 0x0 0x6a00000>;
+		};
+
+		tenx_q6_buffer_mem: memory@c0000000 {
+			no-map;
+			reg = <0x0 0xc0000000 0x0 0x3200000>;
+		};
+
+		ipa_buffer_mem: memory@c3200000 {
+			no-map;
+			reg = <0x0 0xc3200000 0x0 0x12c00000>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@80000 {
+			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
+			reg = <0x0 0x80000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+		};
+
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0x900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			status = "ok";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
+					 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
+			qcom,iommu-geometry = <0x40000000 0x10000000>;
+			qcom,iommu-dma = "fastmap";
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				dmas = <&gpi_dma0 0 1 3 64 0>,
+					<&gpi_dma0 1 1 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				dmas = <&gpi_dma0 0 1 1 64 0>,
+					<&gpi_dma0 1 1 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				dmas = <&gpi_dma0 0 2 3 64 0>,
+					<&gpi_dma0 1 2 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				dmas = <&gpi_dma0 0 2 1 64 0>,
+					<&gpi_dma0 1 2 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				dmas = <&gpi_dma0 0 3 3 64 0>,
+					<&gpi_dma0 1 3 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				dmas = <&gpi_dma0 0 3 1 64 0>,
+					<&gpi_dma0 1 3 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				dmas = <&gpi_dma0 0 4 3 64 0>,
+					<&gpi_dma0 1 4 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				dmas = <&gpi_dma0 0 4 1 64 0>,
+					<&gpi_dma0 1 4 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				dmas = <&gpi_dma0 0 5 3 64 0>,
+					<&gpi_dma0 1 5 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				dmas = <&gpi_dma0 0 5 1 64 0>,
+					<&gpi_dma0 1 5 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				dmas = <&gpi_dma0 0 6 3 64 0>,
+					<&gpi_dma0 1 6 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
+				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				dmas = <&gpi_dma0 0 6 1 64 0>,
+					<&gpi_dma0 1 6 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x99c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x116 0x0>;
+			status = "ok";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x103 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-names = "m-ahb", "s-ahb";
+
+			ranges;
+			status = "disabled";
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				dmas = <&gpi_dma1 0 1 3 64 0>,
+					<&gpi_dma1 1 1 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				dmas = <&gpi_dma1 0 1 1 64 0>,
+					<&gpi_dma1 1 1 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				dmas = <&gpi_dma1 0 2 3 64 0>,
+					<&gpi_dma1 1 2 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				dmas = <&gpi_dma1 0 2 1 64 0>,
+					<&gpi_dma1 1 2 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,i2c-geni";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				dmas = <&gpi_dma1 0 3 3 64 0>,
+					<&gpi_dma1 1 3 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				dmas = <&gpi_dma1 0 3 1 64 0>,
+					<&gpi_dma1 1 3 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				dmas = <&gpi_dma1 0 4 3 64 0>,
+					<&gpi_dma1 1 4 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				dmas = <&gpi_dma1 0 4 1 64 0>,
+					<&gpi_dma1 1 4 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				dmas = <&gpi_dma1 0 5 3 64 0>,
+					<&gpi_dma1 1 5 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				dmas = <&gpi_dma1 0 5 1 64 0>,
+					<&gpi_dma1 1 5 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				dmas = <&gpi_dma1 0 6 3 64 0>,
+					<&gpi_dma1 1 6 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				dmas = <&gpi_dma1 0 6 1 64 0>,
+					<&gpi_dma1 1 6 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				dmas = <&gpi_dma1 0 7 3 64 0>,
+					<&gpi_dma1 1 7 3 64 0>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				interconnects =
+				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
+				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				dmas = <&gpi_dma1 0 7 1 64 0>,
+					<&gpi_dma1 1 7 1 64 0>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		system_noc: interconnect@1640000 {
+			reg = <0x0 0x1640000 0x0 0x45080>;
+			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x1f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0xc400000 0x0 0x3000>,
+			      <0x0 0xc500000 0x0 0x400000>,
+			      <0x0 0xc440000 0x0 0x80000>,
+			      <0x0 0xc4c0000 0x0 0x10000>,
+			      <0x0 0xc42d000 0x0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
+			reg = <0x0 0xf000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk {
+				pins = "gpio10", "gpio11";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup01";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs {
+				pins = "gpio13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk {
+				pins = "gpio12", "gpio13";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk {
+				pins = "gpio12", "gpio13", "gpio10";
+				function = "qup02";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs {
+				pins = "gpio11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk {
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup03";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs {
+				pins = "gpio17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk {
+				pins = "gpio16", "gpio17", "gpio14";
+				function = "qup04";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs {
+				pins = "gpio15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk {
+				pins = "gpio130", "gpio131";
+				function = "qup05";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk {
+				pins = "gpio130", "gpio131", "gpio132";
+				function = "qup05";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs {
+				pins = "gpio133";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk {
+				pins = "gpio132", "gpio133";
+				function = "qup06";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk {
+				pins = "gpio132", "gpio133", "gpio130";
+				function = "qup06";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs {
+				pins = "gpio131";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_rx: qup-uart7-rx {
+				pins = "gpio135";
+				function = "qup07";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx  {
+				pins = "gpio134";
+				function = "qup07";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart8_default: qup-uart8-default {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk {
+				pins = "gpio22", "gpio23";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk {
+				pins = "gpio22", "gpio23", "gpio24";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs {
+				pins = "gpio25";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk {
+				pins = "gpio24", "gpio25";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk {
+				pins = "gpio24", "gpio25", "gpio22";
+				function = "qup12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs {
+				pins = "gpio23";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk {
+				pins = "gpio26", "gpio27";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk {
+				pins = "gpio26", "gpio27", "gpio28";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs {
+				pins = "gpio29";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk {
+				pins = "gpio28", "gpio29";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk {
+				pins = "gpio28", "gpio29", "gpio26";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs {
+				pins = "gpio27";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk {
+				pins = "gpio30", "gpio31";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk {
+				pins = "gpio30", "gpio31", "gpio32";
+				function = "qup15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs {
+				pins = "gpio33";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart13_default: qup-uart13-default {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk {
+				pins = "gpio34", "gpio35";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup16";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs {
+				pins = "gpio37", "gpio38";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk {
+				pins = "gpio40", "gpio41";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-pulll-up;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk {
+				pins = "gpio40", "gpio41", "gpio30";
+				function = "qup17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs {
+				pins = "gpio31";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: apps-smmu@15000000 {
+			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
+				"arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17421000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17421000 0x0 0x1000>,
+				      <0x0 0x17422000 0x0 0x1000>;
+			};
+
+			frame@17423000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17423000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17425000 0x0 0x1000>,
+				      <0x0 0x17426000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17427000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x17429000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742b000 0x0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1742d000 0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
+				"qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			reg = <0x0 0x19100000 0x0 0xB8080>;
+			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		arch_timer: timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			clock-frequency = <19200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
new file mode 100644
index 000000000000..074fe126e85e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+
+&reserved_memory {
+	/delete-node/ memory@a0000000;
+	/delete-node/ memory@b9600000;
+	/delete-node/ memory@c0000000;
+
+	oem_tenx_mem: memory@a0000000 {
+		no-map;
+		reg = <0x0 0xa0000000 0x0 0x6400000>;
+	};
+
+	mpss_diag_buffer_mem: memory@aea00000 {
+		no-map;
+		reg = <0x0 0xaea00000 0x0 0x6400000>;
+	};
+
+	tenx_q6_buffer_mem: memory@b4e00000 {
+		no-map;
+		reg = <0x0 0xb4e00000 0x0 0x3200000>;
+	};
+};
-- 
2.38.0

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 14/10/2022 18:11, Melody Olvera wrote:
> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>  2 files changed, 1673 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen: chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			clock-frequency = <19200000>;

Both clocks are not a property of a SoC. They are provided by the board,
so they should either be defined by board DTS or at least their
frequency must be provided by the board.

> +			clock-output-names = "xo_board";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			power-domain-names = "psci";
> +			power-domains = <&CPU_PD0>;
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;

Wrong indentation.

> +				L3_0: l3-cache {
> +					compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD1>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +

Drop empty lines like that.

> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD2>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD3>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +

Here...

> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +		};
> +	};
> +
> +	idle-states {
> +		entry-method = "psci";
> +
> +		CPU_OFF: cpu-sleep-0 {
> +			compatible = "arm,idle-state";
> +			idle-state-name = "rail-pc";
> +			entry-latency-us = <274>;
> +			exit-latency-us = <480>;
> +			min-residency-us = <3934>;
> +			arm,psci-suspend-param = <0x40000004>;
> +			local-timer-stop;
> +		};
> +	};
> +
> +	domain-idle-states {
> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-l3-off";
> +			entry-latency-us = <584>;
> +			exit-latency-us = <2332>;
> +			min-residency-us = <6118>;
> +			arm,psci-suspend-param = <0x41000044>;
> +		};
> +
> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-power-collapse";
> +			entry-latency-us = <2893>;
> +			exit-latency-us = <4023>;
> +			min-residency-us = <9987>;
> +			arm,psci-suspend-param = <0x41003344>;
> +		};
> +	};
> +
> +	firmware {
> +		qcom_scm {

No underscores in node names. This applies everywhere.

Node names should be generic, so just scm.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	mc_virt: interconnect-1 {
> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0x0 0x80000000 0x0 0x0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +
> +		CPU_PD0: cpu-pd0 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD1: cpu-pd1 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD2: cpu-pd2 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD3: cpu-pd3 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CLUSTER_PD: cluster-pd {
> +			#power-domain-cells = <0>;
> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
> +		};
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@80000000 {
> +			no-map;
> +			reg = <0x0 0x80000000 0x0 0x600000>;
> +		};
> +
> +		xbl_dt_log_mem: memory@80600000 {
> +			no-map;
> +			reg = <0x0 0x80600000 0x0 0x40000>;
> +		};
> +
> +		xbl_ramdump_mem: memory@80640000 {
> +			no-map;
> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
> +		};
> +
> +		aop_image_mem: memory@80800000 {
> +			no-map;
> +			reg = <0x0 0x80800000 0x0 0x60000>;
> +		};
> +
> +		aop_cmd_db_mem: memory@80860000 {
> +			compatible = "qcom,cmd-db";
> +			no-map;
> +			reg = <0x0 0x80860000 0x0 0x20000>;
> +		};
> +
> +		aop_config_mem: memory@80880000 {
> +			no-map;
> +			reg = <0x0 0x80880000 0x0 0x20000>;
> +		};
> +
> +		tme_crash_dump_mem: memory@808a0000 {
> +			no-map;
> +			reg = <0x0 0x808a0000 0x0 0x40000>;
> +		};
> +
> +		tme_log_mem: memory@808e0000 {
> +			no-map;
> +			reg = <0x0 0x808e0000 0x0 0x4000>;
> +		};
> +
> +		uefi_log_mem: memory@808e4000 {
> +			no-map;
> +			reg = <0x0 0x808e4000 0x0 0x10000>;
> +		};
> +
> +		/* secdata region can be reused by apps */
> +
> +		smem_mem: memory@80900000 {
> +			compatible = "qcom,smem";
> +			no-map;
> +			reg = <0x0 0x80900000 0x0 0x200000>;
> +			hwlocks = <&tcsr_mutex 3>;
> +		};
> +
> +		cpucp_fw_mem: memory@80b00000 {
> +			no-map;
> +			reg = <0x0 0x80b00000 0x0 0x100000>;
> +		};
> +
> +		xbl_sc_mem: memory@80c00000 {
> +			no-map;
> +			reg = <0x0 0x80c00000 0x0 0x40000>;
> +		};
> +
> +		/* uefi region can be reused by apps */
> +
> +		tz_stat_mem: memory@81d00000 {
> +			no-map;
> +			reg = <0x0 0x81d00000 0x0 0x100000>;
> +		};
> +
> +		tags_mem: memory@81e00000 {
> +			no-map;
> +			reg = <0x0 0x81e00000 0x0 0x500000>;
> +		};
> +
> +		qtee_mem: memory@82300000 {
> +			no-map;
> +			reg = <0x0 0x82300000 0x0 0x500000>;
> +		};
> +
> +		ta_mem: memory@82800000 {
> +			no-map;
> +			reg = <0x0 0x82800000 0x0 0xa00000>;
> +		};
> +
> +		fs1_mem: memory@83200000 {
> +			no-map;
> +			reg = <0x0 0x83200000 0x0 0x400000>;
> +		};
> +
> +		fs2_mem: memory@83600000 {
> +			no-map;
> +			reg = <0x0 0x83600000 0x0 0x400000>;
> +		};
> +
> +		fs3_mem: memory@83a00000 {
> +			no-map;
> +			reg = <0x0 0x83a00000 0x0 0x400000>;
> +		};
> +
> +		/* Linux kernel image is loaded at 0x83e00000 */
> +
> +		ipa_fw_mem: memory@8be00000 {
> +			no-map;
> +			reg = <0x0 0x8be00000 0x0 0x10000>;
> +		};
> +
> +		ipa_gsi_mem: memory@8be10000 {
> +			no-map;
> +			reg = <0x0 0x8be10000 0x0 0x14000>;
> +		};
> +
> +		mpss_mem: memory@8c000000 {
> +			no-map;
> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
> +		};
> +
> +		q6_mpss_dtb_mem: memory@9ec00000 {
> +			no-map;
> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
> +		};
> +
> +		tenx_mem: memory@a0000000 {
> +			no-map;
> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
> +		};
> +
> +		oem_tenx_mem: memory@b9600000 {
> +			no-map;
> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
> +		};
> +
> +		tenx_q6_buffer_mem: memory@c0000000 {
> +			no-map;
> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
> +		};
> +
> +		ipa_buffer_mem: memory@c3200000 {
> +			no-map;
> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller@80000 {
> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
> +			reg = <0x0 0x80000 0x0 0x1f4200>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +		};
> +
> +		gpi_dma0: dma-controller@900000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> +			#dma-cells = <5>;
> +			reg = <0x0 0x900000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0xf6 0x0>;
> +			status = "ok";

Drop it everywhere. It's by default.

> +		};
> +
> +		qupv3_id_0: geniqup@9c0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x9c0000 0x0 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0xe3 0x0>;
> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
> +			interconnect-names = "qup-core";
> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
> +			qcom,iommu-dma = "fastmap";
> +			dma-coherent;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			uart0: serial@980000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x980000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart0_default>;
> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@984000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c1_data_clk>;
> +				dmas = <&gpi_dma0 0 1 3 64 0>,
> +					<&gpi_dma0 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@984000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> +				dmas = <&gpi_dma0 0 1 1 64 0>,
> +					<&gpi_dma0 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@988000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c2_data_clk>;
> +				dmas = <&gpi_dma0 0 2 3 64 0>,
> +					<&gpi_dma0 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@988000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> +				dmas = <&gpi_dma0 0 2 1 64 0>,
> +					<&gpi_dma0 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@98c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c3_data_clk>;
> +				dmas = <&gpi_dma0 0 3 3 64 0>,
> +					<&gpi_dma0 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@98c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> +				dmas = <&gpi_dma0 0 3 1 64 0>,
> +					<&gpi_dma0 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@990000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c4_data_clk>;
> +				dmas = <&gpi_dma0 0 4 3 64 0>,
> +					<&gpi_dma0 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@990000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> +				dmas = <&gpi_dma0 0 4 1 64 0>,
> +					<&gpi_dma0 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@994000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c5_data_clk>;
> +				dmas = <&gpi_dma0 0 5 3 64 0>,
> +					<&gpi_dma0 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@994000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> +				dmas = <&gpi_dma0 0 5 1 64 0>,
> +					<&gpi_dma0 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c6: i2c@998000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c6_data_clk>;
> +				dmas = <&gpi_dma0 0 6 3 64 0>,
> +					<&gpi_dma0 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi6: spi@998000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> +				dmas = <&gpi_dma0 0 6 1 64 0>,
> +					<&gpi_dma0 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			uart7: serial@99c000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x0 0x99c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		gpi_dma1: dma-controller@a00000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> +			#dma-cells = <5>;
> +			reg = <0x0 0xa00000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0x116 0x0>;
> +			status = "ok";

And here

> +		};
> +
> +		qupv3_id_1: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0xac0000 0x0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0x103 0x0>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			clock-names = "m-ahb", "s-ahb";

clock-names *always* follow clocks

> +
> +			ranges;
> +			status = "disabled";
> +
> +			uart8: serial@a80000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa80000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart8_default>;
> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c9: i2c@a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c9_data_clk>;
> +				dmas = <&gpi_dma1 0 1 3 64 0>,
> +					<&gpi_dma1 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi9: spi@a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> +				dmas = <&gpi_dma1 0 1 1 64 0>,
> +					<&gpi_dma1 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c10: i2c@a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c10_data_clk>;
> +				dmas = <&gpi_dma1 0 2 3 64 0>,
> +					<&gpi_dma1 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi10: spi@a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> +				dmas = <&gpi_dma1 0 2 1 64 0>,
> +					<&gpi_dma1 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c11: i2c@a8c000 {
> +				compatible = "qcom,i2c-geni";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c11_data_clk>;
> +				dmas = <&gpi_dma1 0 3 3 64 0>,
> +					<&gpi_dma1 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi11: spi@a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> +				dmas = <&gpi_dma1 0 3 1 64 0>,
> +					<&gpi_dma1 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c12: i2c@a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c12_data_clk>;
> +				dmas = <&gpi_dma1 0 4 3 64 0>,
> +					<&gpi_dma1 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi12: spi@a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> +				dmas = <&gpi_dma1 0 4 1 64 0>,
> +					<&gpi_dma1 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c13: i2c@a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c13_data_clk>;
> +				dmas = <&gpi_dma1 0 5 3 64 0>,
> +					<&gpi_dma1 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart13: serial@a94000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart13_default>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi13: spi@a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> +				dmas = <&gpi_dma1 0 5 1 64 0>,
> +					<&gpi_dma1 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c14: i2c@a98000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c14_data_clk>;
> +				dmas = <&gpi_dma1 0 6 3 64 0>,
> +					<&gpi_dma1 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi14: spi@a98000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
> +				dmas = <&gpi_dma1 0 6 1 64 0>,
> +					<&gpi_dma1 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c15: i2c@a9c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c15_data_clk>;
> +				dmas = <&gpi_dma1 0 7 3 64 0>,
> +					<&gpi_dma1 1 7 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi15: spi@a9c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
> +				dmas = <&gpi_dma1 0 7 1 64 0>,
> +					<&gpi_dma1 1 7 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +		};
> +
> +		system_noc: interconnect@1640000 {
> +			reg = <0x0 0x1640000 0x0 0x45080>;
> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x1f40000 0x0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		pdc: interrupt-controller@b220000 {
> +			compatible = "qcom,pdc";
> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
> +					  <94 609 31>, <125 63 1>;
> +			#interrupt-cells = <2>;
> +			interrupt-parent = <&intc>;
> +			interrupt-controller;
> +		};
> +
> +		spmi_bus: spmi@c400000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x0 0xc400000 0x0 0x3000>,
> +			      <0x0 0xc500000 0x0 0x400000>,
> +			      <0x0 0xc440000 0x0 0x80000>,
> +			      <0x0 0xc4c0000 0x0 0x10000>,
> +			      <0x0 0xc42d000 0x0 0x4000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tlmm: pinctrl@f000000 {
> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
> +			reg = <0x0 0xf000000 0x0 0x1000000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 151>;
> +			wakeup-parent = <&pdc>;
> +
> +			qup_uart0_default: qup-uart0-default-state {
> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
> +				function = "qup00";
> +			};
> +
> +			qup_i2c1_data_clk: qup-i2c1-data-clk {

-state suffix

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

> +				pins = "gpio10", "gpio11";
> +				function = "qup01";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi1_data_clk: qup-spi1-data-clk {> +				pins = "gpio10", "gpio11", "gpio12";
> +				function = "qup01";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi1_cs: qup-spi1-cs {
> +				pins = "gpio13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
> +				pins = "gpio12", "gpio13";
> +				function = "qup02";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi2_data_clk: qup-spi2-data-clk {
> +				pins = "gpio12", "gpio13", "gpio10";
> +				function = "qup02";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi2_cs: qup-spi2-cs {
> +				pins = "gpio11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
> +				pins = "gpio14", "gpio15";
> +				function = "qup03";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi3_data_clk: qup-spi3-data-clk {
> +				pins = "gpio14", "gpio15", "gpio16";
> +				function = "qup03";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi3_cs: qup-spi3-cs {
> +				pins = "gpio17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
> +				pins = "gpio16", "gpio17";
> +				function = "qup04";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi4_data_clk: qup-spi4-data-clk {
> +				pins = "gpio16", "gpio17", "gpio14";
> +				function = "qup04";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi4_cs: qup-spi4-cs {
> +				pins = "gpio15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
> +				pins = "gpio130", "gpio131";
> +				function = "qup05";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi5_data_clk: qup-spi5-data-clk {
> +				pins = "gpio130", "gpio131", "gpio132";
> +				function = "qup05";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi5_cs: qup-spi5-cs {
> +				pins = "gpio133";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
> +				pins = "gpio132", "gpio133";
> +				function = "qup06";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi6_data_clk: qup-spi6-data-clk {
> +				pins = "gpio132", "gpio133", "gpio130";
> +				function = "qup06";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi6_cs: qup-spi6-cs {
> +				pins = "gpio131";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_rx: qup-uart7-rx {
> +				pins = "gpio135";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_tx: qup-uart7-tx  {
> +				pins = "gpio134";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart8_default: qup-uart8-default {
> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
> +				function = "qup10";
> +			};
> +
> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
> +				pins = "gpio22", "gpio23";
> +				function = "qup11";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi9_data_clk: qup-spi9-data-clk {
> +				pins = "gpio22", "gpio23", "gpio24";
> +				function = "qup11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi9_cs: qup-spi9-cs {
> +				pins = "gpio25";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
> +				pins = "gpio24", "gpio25";
> +				function = "qup12";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi10_data_clk: qup-spi10-data-clk {
> +				pins = "gpio24", "gpio25", "gpio22";
> +				function = "qup12";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi10_cs: qup-spi10-cs {
> +				pins = "gpio23";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
> +				pins = "gpio26", "gpio27";
> +				function = "qup13";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi11_data_clk: qup-spi11-data-clk {
> +				pins = "gpio26", "gpio27", "gpio28";
> +				function = "qup13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi11_cs: qup-spi11-cs {
> +				pins = "gpio29";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
> +				pins = "gpio28", "gpio29";
> +				function = "qup14";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi12_data_clk: qup-spi12-data-clk {
> +				pins = "gpio28", "gpio29", "gpio26";
> +				function = "qup14";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi12_cs: qup-spi12-cs {
> +				pins = "gpio27";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
> +				pins = "gpio30", "gpio31";
> +				function = "qup15";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi13_data_clk: qup-spi13-data-clk {
> +				pins = "gpio30", "gpio31", "gpio32";
> +				function = "qup15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi13_cs: qup-spi13-cs {
> +				pins = "gpio33";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart13_default: qup-uart13-default {
> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
> +				function = "qup15";
> +			};
> +
> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
> +				pins = "gpio34", "gpio35";
> +				function = "qup16";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi14_data_clk: qup-spi14-data-clk {
> +				pins = "gpio34", "gpio35", "gpio36";
> +				function = "qup16";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi14_cs: qup-spi14-cs {
> +				pins = "gpio37", "gpio38";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
> +				pins = "gpio40", "gpio41";
> +				function = "qup17";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi15_data_clk: qup-spi15-data-clk {
> +				pins = "gpio40", "gpio41", "gpio30";
> +				function = "qup17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi15_cs: qup-spi15-cs {
> +				pins = "gpio31";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +		};
> +
> +		apps_smmu: apps-smmu@15000000 {
> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
> +				"arm,mmu-500";
> +			reg = <0x0 0x15000000 0x0 0x100000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <2>;
> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		intc: interrupt-controller@17200000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +		};
> +
> +		timer@17420000 {
> +			compatible = "arm,armv7-timer-mem";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			reg = <0x0 0x17420000 0x0 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@17421000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17421000 0x0 0x1000>,
> +				      <0x0 0x17422000 0x0 0x1000>;
> +			};
> +
> +			frame@17423000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17423000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17425000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17425000 0x0 0x1000>,
> +				      <0x0 0x17426000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17427000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17427000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17429000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17429000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742b000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742b000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742d000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742d000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		apps_rsc: rsc@17a00000 {
> +			label = "apps_rsc";
> +			compatible = "qcom,rpmh-rsc";

compatible, then reg, then the rest.

> +			reg = <0x0 0x17a00000 0x0 0x10000>,
> +			      <0x0 0x17a10000 0x0 0x10000>,
> +			      <0x0 0x17a20000 0x0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
> +
> +			apps_bcm_voter: bcm_voter {

Eh...

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

> +				compatible = "qcom,bcm-voter";
> +			};




Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:11, Melody Olvera wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>  2 files changed, 1673 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..777734b30f56
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1646 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> +	interrupt-parent = <&intc>;
>> +
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	chosen: chosen { };
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <19200000>;
> Both clocks are not a property of a SoC. They are provided by the board,
> so they should either be defined by board DTS or at least their
> frequency must be provided by the board.
That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
the dtsi. These are common to the boards anyways.
>
>> +			clock-output-names = "xo_board";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32000>;
>> +			#clock-cells = <0>;
>> +		};
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <2>;
>> +		#size-cells = <0>;
>> +
>> +		CPU0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			power-domain-names = "psci";
>> +			power-domains = <&CPU_PD0>;
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_0>;
>> +			L2_0: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
> Wrong indentation.
Will fix for all caches.
>
>> +				L3_0: l3-cache {
>> +					compatible = "cache";
>> +				};
>> +			};
>> +		};
>> +
>> +		CPU1: cpu@100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x100>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD1>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_100>;
>> +			L2_100: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
> Drop empty lines like that.
Ack.
>
>> +		};
>> +
>> +		CPU2: cpu@200 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x200>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD2>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_200>;
>> +			L2_200: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +		};
>> +
>> +		CPU3: cpu@300 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x300>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD3>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_300>;
>> +			L2_300: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
> Here...
Ack.
>
>> +		};
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&CPU0>;
>> +				};
>> +
>> +				core1 {
>> +					cpu = <&CPU1>;
>> +				};
>> +
>> +				core2 {
>> +					cpu = <&CPU2>;
>> +				};
>> +
>> +				core3 {
>> +					cpu = <&CPU3>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	idle-states {
>> +		entry-method = "psci";
>> +
>> +		CPU_OFF: cpu-sleep-0 {
>> +			compatible = "arm,idle-state";
>> +			idle-state-name = "rail-pc";
>> +			entry-latency-us = <274>;
>> +			exit-latency-us = <480>;
>> +			min-residency-us = <3934>;
>> +			arm,psci-suspend-param = <0x40000004>;
>> +			local-timer-stop;
>> +		};
>> +	};
>> +
>> +	domain-idle-states {
>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-l3-off";
>> +			entry-latency-us = <584>;
>> +			exit-latency-us = <2332>;
>> +			min-residency-us = <6118>;
>> +			arm,psci-suspend-param = <0x41000044>;
>> +		};
>> +
>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-power-collapse";
>> +			entry-latency-us = <2893>;
>> +			exit-latency-us = <4023>;
>> +			min-residency-us = <9987>;
>> +			arm,psci-suspend-param = <0x41003344>;
>> +		};
>> +	};
>> +
>> +	firmware {
>> +		qcom_scm {
> No underscores in node names. This applies everywhere.
Understood; must've missed prior to submitting. Will be more meticulous.
> Node names should be generic, so just scm.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Got it.
>
>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>> +			#reset-cells = <1>;
>> +		};
>> +	};
>> +
>> +	clk_virt: interconnect-0 {
>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	mc_virt: interconnect-1 {
>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	memory@80000000 {
>> +		device_type = "memory";
>> +		/* We expect the bootloader to fill in the size */
>> +		reg = <0x0 0x80000000 0x0 0x0>;
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +
>> +		CPU_PD0: cpu-pd0 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD1: cpu-pd1 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD2: cpu-pd2 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD3: cpu-pd3 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CLUSTER_PD: cluster-pd {
>> +			#power-domain-cells = <0>;
>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>> +		};
>> +	};
>> +
>> +	reserved_memory: reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: memory@80000000 {
>> +			no-map;
>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>> +		};
>> +
>> +		xbl_dt_log_mem: memory@80600000 {
>> +			no-map;
>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>> +		};
>> +
>> +		xbl_ramdump_mem: memory@80640000 {
>> +			no-map;
>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>> +		};
>> +
>> +		aop_image_mem: memory@80800000 {
>> +			no-map;
>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>> +		};
>> +
>> +		aop_cmd_db_mem: memory@80860000 {
>> +			compatible = "qcom,cmd-db";
>> +			no-map;
>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>> +		};
>> +
>> +		aop_config_mem: memory@80880000 {
>> +			no-map;
>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>> +		};
>> +
>> +		tme_crash_dump_mem: memory@808a0000 {
>> +			no-map;
>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>> +		};
>> +
>> +		tme_log_mem: memory@808e0000 {
>> +			no-map;
>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>> +		};
>> +
>> +		uefi_log_mem: memory@808e4000 {
>> +			no-map;
>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>> +		};
>> +
>> +		/* secdata region can be reused by apps */
>> +
>> +		smem_mem: memory@80900000 {
>> +			compatible = "qcom,smem";
>> +			no-map;
>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>> +			hwlocks = <&tcsr_mutex 3>;
>> +		};
>> +
>> +		cpucp_fw_mem: memory@80b00000 {
>> +			no-map;
>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>> +		};
>> +
>> +		xbl_sc_mem: memory@80c00000 {
>> +			no-map;
>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>> +		};
>> +
>> +		/* uefi region can be reused by apps */
>> +
>> +		tz_stat_mem: memory@81d00000 {
>> +			no-map;
>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>> +		};
>> +
>> +		tags_mem: memory@81e00000 {
>> +			no-map;
>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>> +		};
>> +
>> +		qtee_mem: memory@82300000 {
>> +			no-map;
>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>> +		};
>> +
>> +		ta_mem: memory@82800000 {
>> +			no-map;
>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>> +		};
>> +
>> +		fs1_mem: memory@83200000 {
>> +			no-map;
>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>> +		};
>> +
>> +		fs2_mem: memory@83600000 {
>> +			no-map;
>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>> +		};
>> +
>> +		fs3_mem: memory@83a00000 {
>> +			no-map;
>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>> +		};
>> +
>> +		/* Linux kernel image is loaded at 0x83e00000 */
>> +
>> +		ipa_fw_mem: memory@8be00000 {
>> +			no-map;
>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>> +		};
>> +
>> +		ipa_gsi_mem: memory@8be10000 {
>> +			no-map;
>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>> +		};
>> +
>> +		mpss_mem: memory@8c000000 {
>> +			no-map;
>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>> +		};
>> +
>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>> +			no-map;
>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>> +		};
>> +
>> +		tenx_mem: memory@a0000000 {
>> +			no-map;
>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>> +		};
>> +
>> +		oem_tenx_mem: memory@b9600000 {
>> +			no-map;
>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>> +		};
>> +
>> +		tenx_q6_buffer_mem: memory@c0000000 {
>> +			no-map;
>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>> +		};
>> +
>> +		ipa_buffer_mem: memory@c3200000 {
>> +			no-map;
>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>> +		};
>> +	};
>> +
>> +	soc: soc@0 {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges = <0 0 0 0 0x10 0>;
>> +		dma-ranges = <0 0 0 0 0x10 0>;
>> +		compatible = "simple-bus";
>> +
>> +		gcc: clock-controller@80000 {
>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>> +			clock-names = "bi_tcxo", "sleep_clk";
>> +		};
>> +
>> +		gpi_dma0: dma-controller@900000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0x900000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0xf6 0x0>;
>> +			status = "ok";
> Drop it everywhere. It's by default.
Ack.
>
>> +		};
>> +
>> +		qupv3_id_0: geniqup@9c0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0xe3 0x0>;
>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>> +			interconnect-names = "qup-core";
>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>> +			qcom,iommu-dma = "fastmap";
>> +			dma-coherent;
>> +
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart0: serial@980000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0x980000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart0_default>;
>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c1: i2c@984000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>> +					<&gpi_dma0 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi1: spi@984000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>> +					<&gpi_dma0 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c2: i2c@988000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>> +					<&gpi_dma0 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi2: spi@988000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>> +					<&gpi_dma0 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c3: i2c@98c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>> +					<&gpi_dma0 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi3: spi@98c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>> +					<&gpi_dma0 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c4: i2c@990000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>> +					<&gpi_dma0 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi4: spi@990000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>> +					<&gpi_dma0 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c5: i2c@994000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>> +					<&gpi_dma0 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi5: spi@994000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>> +					<&gpi_dma0 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c6: i2c@998000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>> +					<&gpi_dma0 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi6: spi@998000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>> +					<&gpi_dma0 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			uart7: serial@99c000 {
>> +				compatible = "qcom,geni-debug-uart";
>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		gpi_dma1: dma-controller@a00000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0x116 0x0>;
>> +			status = "ok";
> And here
Ack.
>> +		};
>> +
>> +		qupv3_id_1: geniqup@ac0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0x103 0x0>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			clock-names = "m-ahb", "s-ahb";
> clock-names *always* follow clocks
Got it.
>
>> +
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart8: serial@a80000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart8_default>;
>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c9: i2c@a84000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>> +					<&gpi_dma1 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi9: spi@a84000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>> +					<&gpi_dma1 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c10: i2c@a88000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>> +					<&gpi_dma1 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi10: spi@a88000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>> +					<&gpi_dma1 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c11: i2c@a8c000 {
>> +				compatible = "qcom,i2c-geni";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>> +					<&gpi_dma1 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi11: spi@a8c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>> +					<&gpi_dma1 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c12: i2c@a90000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>> +					<&gpi_dma1 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi12: spi@a90000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>> +					<&gpi_dma1 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c13: i2c@a94000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>> +					<&gpi_dma1 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			uart13: serial@a94000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart13_default>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi13: spi@a94000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>> +					<&gpi_dma1 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c14: i2c@a98000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>> +					<&gpi_dma1 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi14: spi@a98000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>> +					<&gpi_dma1 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c15: i2c@a9c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>> +					<&gpi_dma1 1 7 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi15: spi@a9c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>> +					<&gpi_dma1 1 7 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		system_noc: interconnect@1640000 {
>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>> +			#interconnect-cells = <1>;
>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>> +		};
>> +
>> +		tcsr_mutex: hwlock@1f40000 {
>> +			compatible = "qcom,tcsr-mutex";
>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>> +			#hwlock-cells = <1>;
>> +		};
>> +
>> +		pdc: interrupt-controller@b220000 {
>> +			compatible = "qcom,pdc";
>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>> +					  <94 609 31>, <125 63 1>;
>> +			#interrupt-cells = <2>;
>> +			interrupt-parent = <&intc>;
>> +			interrupt-controller;
>> +		};
>> +
>> +		spmi_bus: spmi@c400000 {
>> +			compatible = "qcom,spmi-pmic-arb";
>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>> +			      <0x0 0xc500000 0x0 0x400000>,
>> +			      <0x0 0xc440000 0x0 0x80000>,
>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>> +			      <0x0 0xc42d000 0x0 0x4000>;
>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> +			interrupt-names = "periph_irq";
>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,ee = <0>;
>> +			qcom,channel = <0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <4>;
>> +		};
>> +
>> +		tlmm: pinctrl@f000000 {
>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			gpio-ranges = <&tlmm 0 0 151>;
>> +			wakeup-parent = <&pdc>;
>> +
>> +			qup_uart0_default: qup-uart0-default-state {
>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>> +				function = "qup00";
>> +			};
>> +
>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
> -state suffix
Didn't realize this was for all pins. Will correct.
> This is a friendly reminder during the review process.
>
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
>
> Thank you.
>
>> +				pins = "gpio10", "gpio11";
>> +				function = "qup01";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi1_data_clk: qup-spi1-data-clk {> +				pins = "gpio10", "gpio11", "gpio12";
>> +				function = "qup01";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi1_cs: qup-spi1-cs {
>> +				pins = "gpio13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>> +				pins = "gpio12", "gpio13";
>> +				function = "qup02";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>> +				pins = "gpio12", "gpio13", "gpio10";
>> +				function = "qup02";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi2_cs: qup-spi2-cs {
>> +				pins = "gpio11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>> +				pins = "gpio14", "gpio15";
>> +				function = "qup03";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>> +				pins = "gpio14", "gpio15", "gpio16";
>> +				function = "qup03";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi3_cs: qup-spi3-cs {
>> +				pins = "gpio17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>> +				pins = "gpio16", "gpio17";
>> +				function = "qup04";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>> +				pins = "gpio16", "gpio17", "gpio14";
>> +				function = "qup04";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi4_cs: qup-spi4-cs {
>> +				pins = "gpio15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>> +				pins = "gpio130", "gpio131";
>> +				function = "qup05";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>> +				pins = "gpio130", "gpio131", "gpio132";
>> +				function = "qup05";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi5_cs: qup-spi5-cs {
>> +				pins = "gpio133";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>> +				pins = "gpio132", "gpio133";
>> +				function = "qup06";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>> +				pins = "gpio132", "gpio133", "gpio130";
>> +				function = "qup06";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi6_cs: qup-spi6-cs {
>> +				pins = "gpio131";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_rx: qup-uart7-rx {
>> +				pins = "gpio135";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_tx: qup-uart7-tx  {
>> +				pins = "gpio134";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart8_default: qup-uart8-default {
>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>> +				function = "qup10";
>> +			};
>> +
>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>> +				pins = "gpio22", "gpio23";
>> +				function = "qup11";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>> +				pins = "gpio22", "gpio23", "gpio24";
>> +				function = "qup11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi9_cs: qup-spi9-cs {
>> +				pins = "gpio25";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>> +				pins = "gpio24", "gpio25";
>> +				function = "qup12";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>> +				pins = "gpio24", "gpio25", "gpio22";
>> +				function = "qup12";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi10_cs: qup-spi10-cs {
>> +				pins = "gpio23";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>> +				pins = "gpio26", "gpio27";
>> +				function = "qup13";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>> +				pins = "gpio26", "gpio27", "gpio28";
>> +				function = "qup13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi11_cs: qup-spi11-cs {
>> +				pins = "gpio29";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>> +				pins = "gpio28", "gpio29";
>> +				function = "qup14";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>> +				pins = "gpio28", "gpio29", "gpio26";
>> +				function = "qup14";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi12_cs: qup-spi12-cs {
>> +				pins = "gpio27";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>> +				pins = "gpio30", "gpio31";
>> +				function = "qup15";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>> +				pins = "gpio30", "gpio31", "gpio32";
>> +				function = "qup15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi13_cs: qup-spi13-cs {
>> +				pins = "gpio33";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart13_default: qup-uart13-default {
>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>> +				function = "qup15";
>> +			};
>> +
>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>> +				pins = "gpio34", "gpio35";
>> +				function = "qup16";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>> +				pins = "gpio34", "gpio35", "gpio36";
>> +				function = "qup16";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi14_cs: qup-spi14-cs {
>> +				pins = "gpio37", "gpio38";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>> +				pins = "gpio40", "gpio41";
>> +				function = "qup17";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>> +				pins = "gpio40", "gpio41", "gpio30";
>> +				function = "qup17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi15_cs: qup-spi15-cs {
>> +				pins = "gpio31";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +		};
>> +
>> +		apps_smmu: apps-smmu@15000000 {
>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>> +				"arm,mmu-500";
>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <2>;
>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		intc: interrupt-controller@17200000 {
>> +			compatible = "arm,gic-v3";
>> +			#interrupt-cells = <3>;
>> +			interrupt-controller;
>> +			#redistributor-regions = <1>;
>> +			redistributor-stride = <0x0 0x20000>;
>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>> +		};
>> +
>> +		timer@17420000 {
>> +			compatible = "arm,armv7-timer-mem";
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>> +			clock-frequency = <19200000>;
>> +
>> +			frame@17421000 {
>> +				frame-number = <0>;
>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>> +				      <0x0 0x17422000 0x0 0x1000>;
>> +			};
>> +
>> +			frame@17423000 {
>> +				frame-number = <1>;
>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17425000 {
>> +				frame-number = <2>;
>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>> +				      <0x0 0x17426000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17427000 {
>> +				frame-number = <3>;
>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17429000 {
>> +				frame-number = <4>;
>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742b000 {
>> +				frame-number = <5>;
>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742d000 {
>> +				frame-number = <6>;
>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		apps_rsc: rsc@17a00000 {
>> +			label = "apps_rsc";
>> +			compatible = "qcom,rpmh-rsc";
> compatible, then reg, then the rest.
Sure.
>
>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>> +			      <0x0 0x17a10000 0x0 0x10000>,
>> +			      <0x0 0x17a20000 0x0 0x10000>;
>> +			reg-names = "drv-0", "drv-1", "drv-2";
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,tcs-offset = <0xd00>;
>> +			qcom,drv-id = <2>;
>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>> +
>> +			apps_bcm_voter: bcm_voter {
> Eh...
>
> Does not look like you tested the DTS against bindings. Please run `make
> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> for instructions).
Will do.
>
>> +				compatible = "qcom,bcm-voter";
>> +			};
>
>
>
> Best regards,
> Krzysztof
>
Thanks,
Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 19/10/2022 16:21, Melody Olvera wrote:
> 
> 
> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>> On 14/10/2022 18:11, Melody Olvera wrote:
>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>> to boot to shell with console on these SoCs.
>>>
>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>  2 files changed, 1673 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> new file mode 100644
>>> index 000000000000..777734b30f56
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> @@ -0,0 +1,1646 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> +	interrupt-parent = <&intc>;
>>> +
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	chosen: chosen { };
>>> +
>>> +	clocks {
>>> +		xo_board: xo-board {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <19200000>;
>> Both clocks are not a property of a SoC. They are provided by the board,
>> so they should either be defined by board DTS or at least their
>> frequency must be provided by the board.
> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> the dtsi. These are common to the boards anyways.

Because people do not pay attention what is part of SoC, what is part of
board. DTSI is for the SoC and these are inputs to the SoC.

We had these talks and my recommendation is the same.

Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Stephan Gerhold]

On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
> On 19/10/2022 16:21, Melody Olvera wrote:
> > On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
> >> On 14/10/2022 18:11, Melody Olvera wrote:
> >> [...]
> >>> +	clocks {
> >>> +		xo_board: xo-board {
> >>> +			compatible = "fixed-clock";
> >>> +			clock-frequency = <19200000>;
> >> Both clocks are not a property of a SoC. They are provided by the board,
> >> so they should either be defined by board DTS or at least their
> >> frequency must be provided by the board.
> > That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> > the dtsi. These are common to the boards anyways.
> 
> Because people do not pay attention what is part of SoC, what is part of
> board. DTSI is for the SoC and these are inputs to the SoC.
> 

(Just chiming in because I had this thought already a few times when you
 suggested moving the XO "clock-frequency" to the board DTS:)

I understand your reasoning for moving components of the board to the
board DTS, but IMHO adding just the clock-frequency to the board DTS is
even more misleading: It suggests that there are functional board
designs where you would use a XO clock with a different clock-frequency.
Is that really realistic though?

There are assumptions about the XO clock frequency in a lot of places:
You would need to fully rewrite the gcc-<SoC>.c driver because it has
fixed multipliers/dividers for one specific XO frequency. All firmware
binaries would likely need changes. And does the hardware even support a
different XO clock frequency? The APQ8016E datasheet for example
strictly documents a XO clock input of 19.2 MHz and a sleep clock of
32.768 kHz.

IMHO the only realistic variation of the XO clock setup would be to have
a physical "fixed-clock" with a higher frequency, followed by a
"fixed-factor-clock" that brings it back to the expected frequency. To
model that properly it is not enough to have just the "clock-frequency"
in the board DTS. In this case you need two clock nodes, and the
xo_board would be the "fixed-factor-clock".

Therefore it should be all or nothing IMO: Either we move the full
xo-board node to the board DTS (which allows alternatively defining the
"fixed-factor-clock" or whatever). Or we assume that there will be
always an input clock signal with the fixed frequency and keep it fully
in the SoC .dtsi.

Having just the "clock-frequency" in the board DTS puts the attention on
the wrong detail, IMO. :)

Thanks,
Stephan

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 20/10/2022 09:54, Stephan Gerhold wrote:
> On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
>> On 19/10/2022 16:21, Melody Olvera wrote:
>>> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>>>> On 14/10/2022 18:11, Melody Olvera wrote:
>>>> [...]
>>>>> +	clocks {
>>>>> +		xo_board: xo-board {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <19200000>;
>>>> Both clocks are not a property of a SoC. They are provided by the board,
>>>> so they should either be defined by board DTS or at least their
>>>> frequency must be provided by the board.
>>> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
>>> the dtsi. These are common to the boards anyways.
>>
>> Because people do not pay attention what is part of SoC, what is part of
>> board. DTSI is for the SoC and these are inputs to the SoC.
>>
> 
> (Just chiming in because I had this thought already a few times when you
>  suggested moving the XO "clock-frequency" to the board DTS:)
> 
> I understand your reasoning for moving components of the board to the
> board DTS, but IMHO adding just the clock-frequency to the board DTS is
> even more misleading: It suggests that there are functional board
> designs where you would use a XO clock with a different clock-frequency.
> Is that really realistic though?

Keeping it in DTSI also suggests you could have some different frequency.

> 
> There are assumptions about the XO clock frequency in a lot of places:
> You would need to fully rewrite the gcc-<SoC>.c driver because it has
> fixed multipliers/dividers for one specific XO frequency. All firmware
> binaries would likely need changes. And does the hardware even support a
> different XO clock frequency? The APQ8016E datasheet for example
> strictly documents a XO clock input of 19.2 MHz and a sleep clock of
> 32.768 kHz.

I know, the same with most of other platforms. Qualcomm is not special
here. Maybe the difference is that some other platforms have few
external clocks and not all of them are required.

> IMHO the only realistic variation of the XO clock setup would be to have
> a physical "fixed-clock" with a higher frequency, followed by a
> "fixed-factor-clock" that brings it back to the expected frequency. To
> model that properly it is not enough to have just the "clock-frequency"
> in the board DTS. In this case you need two clock nodes, and the
> xo_board would be the "fixed-factor-clock".

It's not about whether you can change it or not. It's about describing
hardware - SoC DTSI describes SoC. DTS describes the board (assuming
there is no SoM or other DTSI files). This clock is not in DTSI.

> Therefore it should be all or nothing IMO: Either we move the full
> xo-board node to the board DTS (which allows alternatively defining the
> "fixed-factor-clock" or whatever).

You can move entire clock to boards.

> Or we assume that there will be
> always an input clock signal with the fixed frequency and keep it fully
> in the SoC .dtsi.
> 
> Having just the "clock-frequency" in the board DTS puts the attention on
> the wrong detail, IMO. :)

No, it puts attention to the board designer that he needs to provide the
clock in his design.

We had such talks about other platforms, although I do not have any
recent bookmarks. Something older:

https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/

https://lore.kernel.org/linux-samsung-soc/53DAB0A6.9030700@gmail.com/

Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 20/10/2022 12:08, Krzysztof Kozlowski wrote:
> On 20/10/2022 09:54, Stephan Gerhold wrote:
>> On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
>>> On 19/10/2022 16:21, Melody Olvera wrote:
>>>> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>>>>> On 14/10/2022 18:11, Melody Olvera wrote:
>>>>> [...]
>>>>>> +	clocks {
>>>>>> +		xo_board: xo-board {
>>>>>> +			compatible = "fixed-clock";
>>>>>> +			clock-frequency = <19200000>;
>>>>> Both clocks are not a property of a SoC. They are provided by the board,
>>>>> so they should either be defined by board DTS or at least their
>>>>> frequency must be provided by the board.
>>>> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
>>>> the dtsi. These are common to the boards anyways.
>>>
>>> Because people do not pay attention what is part of SoC, what is part of
>>> board. DTSI is for the SoC and these are inputs to the SoC.
>>>
>>
>> (Just chiming in because I had this thought already a few times when you
>>  suggested moving the XO "clock-frequency" to the board DTS:)
>>
>> I understand your reasoning for moving components of the board to the
>> board DTS, but IMHO adding just the clock-frequency to the board DTS is
>> even more misleading: It suggests that there are functional board
>> designs where you would use a XO clock with a different clock-frequency.
>> Is that really realistic though?
> 
> Keeping it in DTSI also suggests you could have some different frequency.
> 
>>
>> There are assumptions about the XO clock frequency in a lot of places:
>> You would need to fully rewrite the gcc-<SoC>.c driver because it has
>> fixed multipliers/dividers for one specific XO frequency. All firmware
>> binaries would likely need changes. And does the hardware even support a
>> different XO clock frequency? The APQ8016E datasheet for example
>> strictly documents a XO clock input of 19.2 MHz and a sleep clock of
>> 32.768 kHz.
> 
> I know, the same with most of other platforms. Qualcomm is not special
> here. Maybe the difference is that some other platforms have few
> external clocks and not all of them are required.
> 
>> IMHO the only realistic variation of the XO clock setup would be to have
>> a physical "fixed-clock" with a higher frequency, followed by a
>> "fixed-factor-clock" that brings it back to the expected frequency. To
>> model that properly it is not enough to have just the "clock-frequency"
>> in the board DTS. In this case you need two clock nodes, and the
>> xo_board would be the "fixed-factor-clock".
> 
> It's not about whether you can change it or not. It's about describing
> hardware - SoC DTSI describes SoC. DTS describes the board (assuming
> there is no SoM or other DTSI files). This clock is not in DTSI.
> 
>> Therefore it should be all or nothing IMO: Either we move the full
>> xo-board node to the board DTS (which allows alternatively defining the
>> "fixed-factor-clock" or whatever).
> 
> You can move entire clock to boards.
> 
>> Or we assume that there will be
>> always an input clock signal with the fixed frequency and keep it fully
>> in the SoC .dtsi.
>>
>> Having just the "clock-frequency" in the board DTS puts the attention on
>> the wrong detail, IMO. :)
> 
> No, it puts attention to the board designer that he needs to provide the
> clock in his design.
> 

Another solution which would satisfy me, would be to put these clocks to
a dedicated, re-usable DTSI and include that DTSI in each board DTS.

Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Stephan Gerhold]

On Thu, Oct 20, 2022 at 12:08:36PM -0400, Krzysztof Kozlowski wrote:
> On 20/10/2022 09:54, Stephan Gerhold wrote:
> > On Thu, Oct 20, 2022 at 08:41:15AM -0400, Krzysztof Kozlowski wrote:
> >> On 19/10/2022 16:21, Melody Olvera wrote:
> >>> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
> >>>> On 14/10/2022 18:11, Melody Olvera wrote:
> >>>> [...]
> >>>>> +	clocks {
> >>>>> +		xo_board: xo-board {
> >>>>> +			compatible = "fixed-clock";
> >>>>> +			clock-frequency = <19200000>;
> >>>> Both clocks are not a property of a SoC. They are provided by the board,
> >>>> so they should either be defined by board DTS or at least their
> >>>> frequency must be provided by the board.
> >>> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> >>> the dtsi. These are common to the boards anyways.
> >>
> >> Because people do not pay attention what is part of SoC, what is part of
> >> board. DTSI is for the SoC and these are inputs to the SoC.
> >>
> > 
> > (Just chiming in because I had this thought already a few times when you
> >  suggested moving the XO "clock-frequency" to the board DTS:)
> > 
> > I understand your reasoning for moving components of the board to the
> > board DTS, but IMHO adding just the clock-frequency to the board DTS is
> > even more misleading: It suggests that there are functional board
> > designs where you would use a XO clock with a different clock-frequency.
> > Is that really realistic though?
> 
> Keeping it in DTSI also suggests you could have some different frequency.
> 

If the fixed-clock was listed in the SoC DTSI I would personally
consider it as fixed and would not try to modify it in the board DTS.
The way I see it is that the board DTS mostly _extends_ the SoC DTSI
(add peripherals/supplies/...) instead of _modifying_ it.

Anyway this is likely subjective and was not my main point/question. :)

> > 
> > There are assumptions about the XO clock frequency in a lot of places:
> > You would need to fully rewrite the gcc-<SoC>.c driver because it has
> > fixed multipliers/dividers for one specific XO frequency. All firmware
> > binaries would likely need changes. And does the hardware even support a
> > different XO clock frequency? The APQ8016E datasheet for example
> > strictly documents a XO clock input of 19.2 MHz and a sleep clock of
> > 32.768 kHz.
> 
> I know, the same with most of other platforms. Qualcomm is not special
> here. Maybe the difference is that some other platforms have few
> external clocks and not all of them are required.
> 
> > IMHO the only realistic variation of the XO clock setup would be to have
> > a physical "fixed-clock" with a higher frequency, followed by a
> > "fixed-factor-clock" that brings it back to the expected frequency. To
> > model that properly it is not enough to have just the "clock-frequency"
> > in the board DTS. In this case you need two clock nodes, and the
> > xo_board would be the "fixed-factor-clock".
> 
> It's not about whether you can change it or not. It's about describing
> hardware - SoC DTSI describes SoC. DTS describes the board (assuming
> there is no SoM or other DTSI files). This clock is not in DTSI.
> 
> > Therefore it should be all or nothing IMO: Either we move the full
> > xo-board node to the board DTS (which allows alternatively defining the
> > "fixed-factor-clock" or whatever).
> 
> You can move entire clock to boards.
> 
> > Or we assume that there will be
> > always an input clock signal with the fixed frequency and keep it fully
> > in the SoC .dtsi.
> > 
> > Having just the "clock-frequency" in the board DTS puts the attention on
> > the wrong detail, IMO. :)
> 
> No, it puts attention to the board designer that he needs to provide the
> clock in his design.
> 
> We had such talks about other platforms, although I do not have any
> recent bookmarks. Something older:
> 
> https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/
> 
> https://lore.kernel.org/linux-samsung-soc/53DAB0A6.9030700@gmail.com/
> 

If I understand you correctly your argument for having the clock in the
board DTS instead of the SoC DTSI is:

The SoC DTSI describes the components of the SoC, while the board DTS
describes the components of the board (built around the SoC). The clock
is part of the board (and not the SoC) and therefore belongs into the
board DTS and not the SoC DTSI. Having the SoC/board components clearly
separated ensures people writing new board DTS pay attention to
everything board-specific.

Correct? This sounds reasonable to me.

However, the main question of my previous mail was: Why do you
alternatively recommend to keep the clock defined in the SoC DTSI and to
just put the clock-frequency into the board DTS? This sounds like a
contradiction of the above to me: the clock is still (partially)
described as part of the SoC, even though it belongs to the board.

Someone writing a board DTS should not just put attention to the
clock-frequency, but also if they have a single fixed-clock or
maybe some kind of clock-fixed-factor setup, as I wrote.

Thanks,
Stephan

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 20/10/2022 13:18, Stephan Gerhold wrote:
>> No, it puts attention to the board designer that he needs to provide the
>> clock in his design.
>>
>> We had such talks about other platforms, although I do not have any
>> recent bookmarks. Something older:
>>
>> https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/
>>
>> https://lore.kernel.org/linux-samsung-soc/53DAB0A6.9030700@gmail.com/
>>
> 
> If I understand you correctly your argument for having the clock in the
> board DTS instead of the SoC DTSI is:
> 
> The SoC DTSI describes the components of the SoC, while the board DTS
> describes the components of the board (built around the SoC). The clock
> is part of the board (and not the SoC) and therefore belongs into the
> board DTS and not the SoC DTSI. Having the SoC/board components clearly
> separated ensures people writing new board DTS pay attention to
> everything board-specific.
> 
> Correct? This sounds reasonable to me.

Yes.

> 
> However, the main question of my previous mail was: Why do you
> alternatively recommend to keep the clock defined in the SoC DTSI and to
> just put the clock-frequency into the board DTS? This sounds like a
> contradiction of the above to me: the clock is still (partially)
> described as part of the SoC, even though it belongs to the board.

The proposal is a trade-off, compromise between code duplication and
above recommendation of splitting SoC <-> board.

As you said, all boards will provide this clock, so it is reasonable to
put some pieces of it in the SoC DTSI to avoid duplication. But the
final piece - what clock is there exactly (model, frequency etc) should
be put in board DTS to clarify that this comes with board.

> Someone writing a board DTS should not just put attention to the
> clock-frequency, but also if they have a single fixed-clock or
> maybe some kind of clock-fixed-factor setup, as I wrote.

True. If such setup is probably, then my recommendation would be to put
entire clock to the board.

Just note, that even in proposed frequency->board DTS, it is still
possible to use the clock-fixed-factor.

Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

On 10/20/2022 10:59 AM, Krzysztof Kozlowski wrote:
> On 20/10/2022 13:18, Stephan Gerhold wrote:
>>> No, it puts attention to the board designer that he needs to provide the
>>> clock in his design.
>>>
>>> We had such talks about other platforms, although I do not have any
>>> recent bookmarks. Something older:
>>>
>>> https://lore.kernel.org/all/3382034.5ADO0F7naY@wuerfel/
>>>
>>> https://lore.kernel.org/linux-samsung-soc/53DAB0A6.9030700@gmail.com/
>>>
>> If I understand you correctly your argument for having the clock in the
>> board DTS instead of the SoC DTSI is:
>>
>> The SoC DTSI describes the components of the SoC, while the board DTS
>> describes the components of the board (built around the SoC). The clock
>> is part of the board (and not the SoC) and therefore belongs into the
>> board DTS and not the SoC DTSI. Having the SoC/board components clearly
>> separated ensures people writing new board DTS pay attention to
>> everything board-specific.
>>
>> Correct? This sounds reasonable to me.
> Yes.
>
>> However, the main question of my previous mail was: Why do you
>> alternatively recommend to keep the clock defined in the SoC DTSI and to
>> just put the clock-frequency into the board DTS? This sounds like a
>> contradiction of the above to me: the clock is still (partially)
>> described as part of the SoC, even though it belongs to the board.
> The proposal is a trade-off, compromise between code duplication and
> above recommendation of splitting SoC <-> board.
>
> As you said, all boards will provide this clock, so it is reasonable to
> put some pieces of it in the SoC DTSI to avoid duplication. But the
> final piece - what clock is there exactly (model, frequency etc) should
> be put in board DTS to clarify that this comes with board.
>
>> Someone writing a board DTS should not just put attention to the
>> clock-frequency, but also if they have a single fixed-clock or
>> maybe some kind of clock-fixed-factor setup, as I wrote.
> True. If such setup is probably, then my recommendation would be to put
> entire clock to the board.
Going through this thread, this seems to be the conclusion. Will all clock nodes to the
DTS files.
>
> Just note, that even in proposed frequency->board DTS, it is still
> possible to use the clock-fixed-factor.
>
>
Thanks,
Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 14/10/2022 18:11, Melody Olvera wrote:

(...)

> +
> +	firmware {
> +		qcom_scm {
> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";

How does this pass your dtbs_check tests?

This applies everywhere...


Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Krzysztof Kozlowski]

On 14/10/2022 18:11, Melody Olvera wrote:
> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>  2 files changed, 1673 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>

As pointed out by kernel test robot, your patchset is unbuildable and
unmerge'able, so automated tools cannot test it.

Best regards,
Krzysztof

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

On 10/18/2022 3:15 PM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:11, Melody Olvera wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>  2 files changed, 1673 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..777734b30f56
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1646 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> As pointed out by kernel test robot, your patchset is unbuildable and
> unmerge'able, so automated tools cannot test it.
I saw. I will be more explicit about the dependencies on previous patches
in the next patchset.

Thanks,
Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Richard Acayan]

> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
> to boot to shell with console on these SoCs.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>  2 files changed, 1673 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> new file mode 100644
> index 000000000000..777734b30f56
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -0,0 +1,1646 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen: chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			clock-frequency = <19200000>;
> +			clock-output-names = "xo_board";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			power-domain-names = "psci";
> +			power-domains = <&CPU_PD0>;
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_0>;
> +			L2_0: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +				L3_0: l3-cache {
> +					compatible = "cache";
> +				};
> +			};
> +		};
> +
> +		CPU1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD1>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_100>;
> +			L2_100: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +
> +		};
> +
> +		CPU2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD2>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_200>;
> +			L2_200: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +		};
> +
> +		CPU3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD3>;
> +			power-domain-names = "psci";
> +			qcom,freq-domains = <&cpufreq_hw 0>;
> +			next-level-cache = <&L2_300>;
> +			L2_300: l2-cache {
> +			      compatible = "cache";
> +			      next-level-cache = <&L3_0>;
> +			};
> +
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +		};
> +	};
> +
> +	idle-states {
> +		entry-method = "psci";
> +
> +		CPU_OFF: cpu-sleep-0 {
> +			compatible = "arm,idle-state";
> +			idle-state-name = "rail-pc";
> +			entry-latency-us = <274>;
> +			exit-latency-us = <480>;
> +			min-residency-us = <3934>;
> +			arm,psci-suspend-param = <0x40000004>;
> +			local-timer-stop;
> +		};
> +	};
> +
> +	domain-idle-states {
> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-l3-off";
> +			entry-latency-us = <584>;
> +			exit-latency-us = <2332>;
> +			min-residency-us = <6118>;
> +			arm,psci-suspend-param = <0x41000044>;
> +		};
> +
> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
> +			compatible = "domain-idle-state";
> +			idle-state-name = "cluster-power-collapse";
> +			entry-latency-us = <2893>;
> +			exit-latency-us = <4023>;
> +			min-residency-us = <9987>;
> +			arm,psci-suspend-param = <0x41003344>;
> +		};
> +	};
> +
> +	firmware {
> +		qcom_scm {
> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	mc_virt: interconnect-1 {
> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0x0 0x80000000 0x0 0x0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +
> +		CPU_PD0: cpu-pd0 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD1: cpu-pd1 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD2: cpu-pd2 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CPU_PD3: cpu-pd3 {
> +			#power-domain-cells = <0>;
> +			power-domains = <&CLUSTER_PD>;
> +			domain-idle-states = <&CPU_OFF>;
> +		};
> +
> +		CLUSTER_PD: cluster-pd {
> +			#power-domain-cells = <0>;
> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
> +		};
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: memory@80000000 {
> +			no-map;
> +			reg = <0x0 0x80000000 0x0 0x600000>;
> +		};
> +
> +		xbl_dt_log_mem: memory@80600000 {
> +			no-map;
> +			reg = <0x0 0x80600000 0x0 0x40000>;
> +		};
> +
> +		xbl_ramdump_mem: memory@80640000 {
> +			no-map;
> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
> +		};
> +
> +		aop_image_mem: memory@80800000 {
> +			no-map;
> +			reg = <0x0 0x80800000 0x0 0x60000>;
> +		};
> +
> +		aop_cmd_db_mem: memory@80860000 {
> +			compatible = "qcom,cmd-db";
> +			no-map;
> +			reg = <0x0 0x80860000 0x0 0x20000>;
> +		};
> +
> +		aop_config_mem: memory@80880000 {
> +			no-map;
> +			reg = <0x0 0x80880000 0x0 0x20000>;
> +		};
> +
> +		tme_crash_dump_mem: memory@808a0000 {
> +			no-map;
> +			reg = <0x0 0x808a0000 0x0 0x40000>;
> +		};
> +
> +		tme_log_mem: memory@808e0000 {
> +			no-map;
> +			reg = <0x0 0x808e0000 0x0 0x4000>;
> +		};
> +
> +		uefi_log_mem: memory@808e4000 {
> +			no-map;
> +			reg = <0x0 0x808e4000 0x0 0x10000>;
> +		};
> +
> +		/* secdata region can be reused by apps */
> +
> +		smem_mem: memory@80900000 {
> +			compatible = "qcom,smem";
> +			no-map;
> +			reg = <0x0 0x80900000 0x0 0x200000>;
> +			hwlocks = <&tcsr_mutex 3>;
> +		};
> +
> +		cpucp_fw_mem: memory@80b00000 {
> +			no-map;
> +			reg = <0x0 0x80b00000 0x0 0x100000>;
> +		};
> +
> +		xbl_sc_mem: memory@80c00000 {
> +			no-map;
> +			reg = <0x0 0x80c00000 0x0 0x40000>;
> +		};
> +
> +		/* uefi region can be reused by apps */
> +
> +		tz_stat_mem: memory@81d00000 {
> +			no-map;
> +			reg = <0x0 0x81d00000 0x0 0x100000>;
> +		};
> +
> +		tags_mem: memory@81e00000 {
> +			no-map;
> +			reg = <0x0 0x81e00000 0x0 0x500000>;
> +		};
> +
> +		qtee_mem: memory@82300000 {
> +			no-map;
> +			reg = <0x0 0x82300000 0x0 0x500000>;
> +		};
> +
> +		ta_mem: memory@82800000 {
> +			no-map;
> +			reg = <0x0 0x82800000 0x0 0xa00000>;
> +		};
> +
> +		fs1_mem: memory@83200000 {
> +			no-map;
> +			reg = <0x0 0x83200000 0x0 0x400000>;
> +		};
> +
> +		fs2_mem: memory@83600000 {
> +			no-map;
> +			reg = <0x0 0x83600000 0x0 0x400000>;
> +		};
> +
> +		fs3_mem: memory@83a00000 {
> +			no-map;
> +			reg = <0x0 0x83a00000 0x0 0x400000>;
> +		};
> +
> +		/* Linux kernel image is loaded at 0x83e00000 */
> +
> +		ipa_fw_mem: memory@8be00000 {
> +			no-map;
> +			reg = <0x0 0x8be00000 0x0 0x10000>;
> +		};
> +
> +		ipa_gsi_mem: memory@8be10000 {
> +			no-map;
> +			reg = <0x0 0x8be10000 0x0 0x14000>;
> +		};
> +
> +		mpss_mem: memory@8c000000 {
> +			no-map;
> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
> +		};
> +
> +		q6_mpss_dtb_mem: memory@9ec00000 {
> +			no-map;
> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
> +		};
> +
> +		tenx_mem: memory@a0000000 {
> +			no-map;
> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
> +		};
> +
> +		oem_tenx_mem: memory@b9600000 {
> +			no-map;
> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
> +		};
> +
> +		tenx_q6_buffer_mem: memory@c0000000 {
> +			no-map;
> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
> +		};
> +
> +		ipa_buffer_mem: memory@c3200000 {
> +			no-map;
> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +		compatible = "simple-bus";
> +
> +		gcc: clock-controller@80000 {
> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
> +			reg = <0x0 0x80000 0x0 0x1f4200>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +		};
> +
> +		gpi_dma0: dma-controller@900000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";

This won't work if you drop series [1]. It won't just fail the schema checks,
but it would also fail to probe because the driver doesn't recognise it.

I think you were told to rebase on [2], and didn't change your own series
because it only applied to ee_offset = 0x0. There is another series [3] that
was sent to you, meant for ee_offset = 0x10000. You're expected to change your
patches (in both series you sent) based on what was changed in that series.

[1] https://lore.kernel.org/linux-arm-msm/a4db0335-33d8-76cd-6f89-b8bde603aedf@quicinc.com/
[2] https://lore.kernel.org/linux-arm-msm/20221018005740.23952-1-mailingradian@gmail.com/T/
[3] https://lore.kernel.org/linux-arm-msm/20221018230352.1238479-1-krzysztof.kozlowski@linaro.org/T/

> +			#dma-cells = <5>;
> +			reg = <0x0 0x900000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0xf6 0x0>;
> +			status = "ok";
> +		};
> +
> +		qupv3_id_0: geniqup@9c0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x9c0000 0x0 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0xe3 0x0>;
> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
> +			interconnect-names = "qup-core";
> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
> +			qcom,iommu-dma = "fastmap";
> +			dma-coherent;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			uart0: serial@980000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x980000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart0_default>;
> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@984000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c1_data_clk>;
> +				dmas = <&gpi_dma0 0 1 3 64 0>,
> +					<&gpi_dma0 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@984000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x984000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> +				dmas = <&gpi_dma0 0 1 1 64 0>,
> +					<&gpi_dma0 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@988000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c2_data_clk>;
> +				dmas = <&gpi_dma0 0 2 3 64 0>,
> +					<&gpi_dma0 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@988000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x988000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> +				dmas = <&gpi_dma0 0 2 1 64 0>,
> +					<&gpi_dma0 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@98c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c3_data_clk>;
> +				dmas = <&gpi_dma0 0 3 3 64 0>,
> +					<&gpi_dma0 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@98c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x98c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> +				dmas = <&gpi_dma0 0 3 1 64 0>,
> +					<&gpi_dma0 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@990000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c4_data_clk>;
> +				dmas = <&gpi_dma0 0 4 3 64 0>,
> +					<&gpi_dma0 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@990000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x990000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> +				dmas = <&gpi_dma0 0 4 1 64 0>,
> +					<&gpi_dma0 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@994000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c5_data_clk>;
> +				dmas = <&gpi_dma0 0 5 3 64 0>,
> +					<&gpi_dma0 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@994000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x994000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> +				dmas = <&gpi_dma0 0 5 1 64 0>,
> +					<&gpi_dma0 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c6: i2c@998000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c6_data_clk>;
> +				dmas = <&gpi_dma0 0 6 3 64 0>,
> +					<&gpi_dma0 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi6: spi@998000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x998000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> +				dmas = <&gpi_dma0 0 6 1 64 0>,
> +					<&gpi_dma0 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			uart7: serial@99c000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0x0 0x99c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		gpi_dma1: dma-controller@a00000  {
> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";

See above.

> +			#dma-cells = <5>;
> +			reg = <0x0 0xa00000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels = <12>;
> +			dma-channel-mask = <0x3f>;
> +			iommus = <&apps_smmu 0x116 0x0>;
> +			status = "ok";
> +		};
> +
> +		qupv3_id_1: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0xac0000 0x0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0x103 0x0>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			clock-names = "m-ahb", "s-ahb";
> +
> +			ranges;
> +			status = "disabled";
> +
> +			uart8: serial@a80000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa80000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart8_default>;
> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c9: i2c@a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c9_data_clk>;
> +				dmas = <&gpi_dma1 0 1 3 64 0>,
> +					<&gpi_dma1 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi9: spi@a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa84000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> +				dmas = <&gpi_dma1 0 1 1 64 0>,
> +					<&gpi_dma1 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c10: i2c@a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c10_data_clk>;
> +				dmas = <&gpi_dma1 0 2 3 64 0>,
> +					<&gpi_dma1 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi10: spi@a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa88000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> +				dmas = <&gpi_dma1 0 2 1 64 0>,
> +					<&gpi_dma1 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c11: i2c@a8c000 {
> +				compatible = "qcom,i2c-geni";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c11_data_clk>;
> +				dmas = <&gpi_dma1 0 3 3 64 0>,
> +					<&gpi_dma1 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi11: spi@a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa8c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> +				dmas = <&gpi_dma1 0 3 1 64 0>,
> +					<&gpi_dma1 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c12: i2c@a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c12_data_clk>;
> +				dmas = <&gpi_dma1 0 4 3 64 0>,
> +					<&gpi_dma1 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi12: spi@a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa90000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> +				dmas = <&gpi_dma1 0 4 1 64 0>,
> +					<&gpi_dma1 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c13: i2c@a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c13_data_clk>;
> +				dmas = <&gpi_dma1 0 5 3 64 0>,
> +					<&gpi_dma1 1 5 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart13: serial@a94000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart13_default>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi13: spi@a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa94000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> +				dmas = <&gpi_dma1 0 5 1 64 0>,
> +					<&gpi_dma1 1 5 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c14: i2c@a98000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c14_data_clk>;
> +				dmas = <&gpi_dma1 0 6 3 64 0>,
> +					<&gpi_dma1 1 6 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi14: spi@a98000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa98000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
> +				dmas = <&gpi_dma1 0 6 1 64 0>,
> +					<&gpi_dma1 1 6 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			i2c15: i2c@a9c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_i2c15_data_clk>;
> +				dmas = <&gpi_dma1 0 7 3 64 0>,
> +					<&gpi_dma1 1 7 3 64 0>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi15: spi@a9c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0xa9c000 0x0 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
> +				interconnects =
> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
> +				dmas = <&gpi_dma1 0 7 1 64 0>,
> +					<&gpi_dma1 1 7 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +		};
> +
> +		system_noc: interconnect@1640000 {
> +			reg = <0x0 0x1640000 0x0 0x45080>;
> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x1f40000 0x0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		pdc: interrupt-controller@b220000 {
> +			compatible = "qcom,pdc";
> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
> +					  <94 609 31>, <125 63 1>;
> +			#interrupt-cells = <2>;
> +			interrupt-parent = <&intc>;
> +			interrupt-controller;
> +		};
> +
> +		spmi_bus: spmi@c400000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x0 0xc400000 0x0 0x3000>,
> +			      <0x0 0xc500000 0x0 0x400000>,
> +			      <0x0 0xc440000 0x0 0x80000>,
> +			      <0x0 0xc4c0000 0x0 0x10000>,
> +			      <0x0 0xc42d000 0x0 0x4000>;
> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> +			interrupt-names = "periph_irq";
> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tlmm: pinctrl@f000000 {
> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
> +			reg = <0x0 0xf000000 0x0 0x1000000>;
> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 151>;
> +			wakeup-parent = <&pdc>;
> +
> +			qup_uart0_default: qup-uart0-default-state {
> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
> +				function = "qup00";
> +			};
> +
> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
> +				pins = "gpio10", "gpio11";
> +				function = "qup01";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi1_data_clk: qup-spi1-data-clk {
> +				pins = "gpio10", "gpio11", "gpio12";
> +				function = "qup01";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi1_cs: qup-spi1-cs {
> +				pins = "gpio13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
> +				pins = "gpio12", "gpio13";
> +				function = "qup02";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi2_data_clk: qup-spi2-data-clk {
> +				pins = "gpio12", "gpio13", "gpio10";
> +				function = "qup02";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi2_cs: qup-spi2-cs {
> +				pins = "gpio11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
> +				pins = "gpio14", "gpio15";
> +				function = "qup03";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi3_data_clk: qup-spi3-data-clk {
> +				pins = "gpio14", "gpio15", "gpio16";
> +				function = "qup03";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi3_cs: qup-spi3-cs {
> +				pins = "gpio17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
> +				pins = "gpio16", "gpio17";
> +				function = "qup04";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi4_data_clk: qup-spi4-data-clk {
> +				pins = "gpio16", "gpio17", "gpio14";
> +				function = "qup04";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi4_cs: qup-spi4-cs {
> +				pins = "gpio15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
> +				pins = "gpio130", "gpio131";
> +				function = "qup05";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi5_data_clk: qup-spi5-data-clk {
> +				pins = "gpio130", "gpio131", "gpio132";
> +				function = "qup05";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi5_cs: qup-spi5-cs {
> +				pins = "gpio133";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
> +				pins = "gpio132", "gpio133";
> +				function = "qup06";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi6_data_clk: qup-spi6-data-clk {
> +				pins = "gpio132", "gpio133", "gpio130";
> +				function = "qup06";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi6_cs: qup-spi6-cs {
> +				pins = "gpio131";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_rx: qup-uart7-rx {
> +				pins = "gpio135";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_tx: qup-uart7-tx  {
> +				pins = "gpio134";
> +				function = "qup07";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart8_default: qup-uart8-default {
> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
> +				function = "qup10";
> +			};
> +
> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
> +				pins = "gpio22", "gpio23";
> +				function = "qup11";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi9_data_clk: qup-spi9-data-clk {
> +				pins = "gpio22", "gpio23", "gpio24";
> +				function = "qup11";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi9_cs: qup-spi9-cs {
> +				pins = "gpio25";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
> +				pins = "gpio24", "gpio25";
> +				function = "qup12";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi10_data_clk: qup-spi10-data-clk {
> +				pins = "gpio24", "gpio25", "gpio22";
> +				function = "qup12";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi10_cs: qup-spi10-cs {
> +				pins = "gpio23";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
> +				pins = "gpio26", "gpio27";
> +				function = "qup13";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi11_data_clk: qup-spi11-data-clk {
> +				pins = "gpio26", "gpio27", "gpio28";
> +				function = "qup13";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi11_cs: qup-spi11-cs {
> +				pins = "gpio29";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
> +				pins = "gpio28", "gpio29";
> +				function = "qup14";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi12_data_clk: qup-spi12-data-clk {
> +				pins = "gpio28", "gpio29", "gpio26";
> +				function = "qup14";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi12_cs: qup-spi12-cs {
> +				pins = "gpio27";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
> +				pins = "gpio30", "gpio31";
> +				function = "qup15";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi13_data_clk: qup-spi13-data-clk {
> +				pins = "gpio30", "gpio31", "gpio32";
> +				function = "qup15";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi13_cs: qup-spi13-cs {
> +				pins = "gpio33";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_uart13_default: qup-uart13-default {
> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
> +				function = "qup15";
> +			};
> +
> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
> +				pins = "gpio34", "gpio35";
> +				function = "qup16";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi14_data_clk: qup-spi14-data-clk {
> +				pins = "gpio34", "gpio35", "gpio36";
> +				function = "qup16";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi14_cs: qup-spi14-cs {
> +				pins = "gpio37", "gpio38";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
> +				pins = "gpio40", "gpio41";
> +				function = "qup17";
> +				drive-strength = <2>;
> +				bias-pulll-up;
> +			};
> +
> +			qup_spi15_data_clk: qup-spi15-data-clk {
> +				pins = "gpio40", "gpio41", "gpio30";
> +				function = "qup17";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +
> +			qup_spi15_cs: qup-spi15-cs {
> +				pins = "gpio31";
> +				drive-strength = <6>;
> +				bias-disable;
> +			};
> +		};
> +
> +		apps_smmu: apps-smmu@15000000 {
> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
> +				"arm,mmu-500";
> +			reg = <0x0 0x15000000 0x0 0x100000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <2>;
> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		intc: interrupt-controller@17200000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> +		};
> +
> +		timer@17420000 {
> +			compatible = "arm,armv7-timer-mem";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			reg = <0x0 0x17420000 0x0 0x1000>;
> +			clock-frequency = <19200000>;
> +
> +			frame@17421000 {
> +				frame-number = <0>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17421000 0x0 0x1000>,
> +				      <0x0 0x17422000 0x0 0x1000>;
> +			};
> +
> +			frame@17423000 {
> +				frame-number = <1>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17423000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17425000 {
> +				frame-number = <2>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17425000 0x0 0x1000>,
> +				      <0x0 0x17426000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17427000 {
> +				frame-number = <3>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17427000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@17429000 {
> +				frame-number = <4>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x17429000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742b000 {
> +				frame-number = <5>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742b000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +
> +			frame@1742d000 {
> +				frame-number = <6>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg = <0x0 0x1742d000 0x0 0x1000>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		apps_rsc: rsc@17a00000 {
> +			label = "apps_rsc";
> +			compatible = "qcom,rpmh-rsc";
> +			reg = <0x0 0x17a00000 0x0 0x10000>,
> +			      <0x0 0x17a10000 0x0 0x10000>,
> +			      <0x0 0x17a20000 0x0 0x10000>;
> +			reg-names = "drv-0", "drv-1", "drv-2";
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +			qcom,tcs-offset = <0xd00>;
> +			qcom,drv-id = <2>;
> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
> +
> +			apps_bcm_voter: bcm_voter {
> +				compatible = "qcom,bcm-voter";
> +			};
> +
> +			rpmhcc: clock-controller {
> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
> +				#clock-cells = <1>;
> +				clock-names = "xo";
> +				clocks = <&xo_board>;
> +			};
> +
> +			rpmhpd: power-controller {
> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
> +				#power-domain-cells = <1>;
> +				operating-points-v2 = <&rpmhpd_opp_table>;
> +
> +				rpmhpd_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					rpmhpd_opp_ret: opp1 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> +					};
> +
> +					rpmhpd_opp_min_svs: opp2 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +					};
> +
> +					rpmhpd_opp_low_svs: opp3 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +					};
> +
> +					rpmhpd_opp_svs: opp4 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +					};
> +
> +					rpmhpd_opp_svs_l1: opp5 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +					};
> +
> +					rpmhpd_opp_nom: opp6 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +					};
> +
> +					rpmhpd_opp_nom_l1: opp7 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +					};
> +
> +					rpmhpd_opp_nom_l2: opp8 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> +					};
> +
> +					rpmhpd_opp_turbo: opp9 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +					};
> +
> +					rpmhpd_opp_turbo_l1: opp10 {
> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> +					};
> +				};
> +			};
> +		};
> +
> +		cpufreq_hw: cpufreq@17d91000 {
> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
> +				"qcom,cpufreq-epss";
> +			reg = <0x0 0x17d91000 0x0 0x1000>;
> +			reg-names = "freq-domain0";
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> +			clock-names = "xo", "alternate";
> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dcvsh-irq-0";
> +			#freq-domain-cells = <1>;
> +		};
> +
> +		gem_noc: interconnect@19100000 {
> +			reg = <0x0 0x19100000 0x0 0xB8080>;
> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		arch_timer: timer {
> +			compatible = "arm,armv8-timer";
> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +			clock-frequency = <19200000>;
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
> new file mode 100644
> index 000000000000..074fe126e85e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "qdu1000.dtsi"
> +
> +&reserved_memory {
> +	/delete-node/ memory@a0000000;
> +	/delete-node/ memory@b9600000;
> +	/delete-node/ memory@c0000000;
> +
> +	oem_tenx_mem: memory@a0000000 {
> +		no-map;
> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
> +	};
> +
> +	mpss_diag_buffer_mem: memory@aea00000 {
> +		no-map;
> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
> +	};
> +
> +	tenx_q6_buffer_mem: memory@b4e00000 {
> +		no-map;
> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
> +	};
> +};
> -- 
> 2.38.0

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

On 10/23/2022 5:53 PM, Richard Acayan wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>  2 files changed, 1673 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..777734b30f56
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1646 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> +	interrupt-parent = <&intc>;
>> +
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	chosen: chosen { };
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <19200000>;
>> +			clock-output-names = "xo_board";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32000>;
>> +			#clock-cells = <0>;
>> +		};
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <2>;
>> +		#size-cells = <0>;
>> +
>> +		CPU0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			power-domain-names = "psci";
>> +			power-domains = <&CPU_PD0>;
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_0>;
>> +			L2_0: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +				L3_0: l3-cache {
>> +					compatible = "cache";
>> +				};
>> +			};
>> +		};
>> +
>> +		CPU1: cpu@100 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x100>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD1>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_100>;
>> +			L2_100: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
>> +		};
>> +
>> +		CPU2: cpu@200 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x200>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD2>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_200>;
>> +			L2_200: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +		};
>> +
>> +		CPU3: cpu@300 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			reg = <0x0 0x300>;
>> +			enable-method = "psci";
>> +			power-domains = <&CPU_PD3>;
>> +			power-domain-names = "psci";
>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>> +			next-level-cache = <&L2_300>;
>> +			L2_300: l2-cache {
>> +			      compatible = "cache";
>> +			      next-level-cache = <&L3_0>;
>> +			};
>> +
>> +		};
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&CPU0>;
>> +				};
>> +
>> +				core1 {
>> +					cpu = <&CPU1>;
>> +				};
>> +
>> +				core2 {
>> +					cpu = <&CPU2>;
>> +				};
>> +
>> +				core3 {
>> +					cpu = <&CPU3>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	idle-states {
>> +		entry-method = "psci";
>> +
>> +		CPU_OFF: cpu-sleep-0 {
>> +			compatible = "arm,idle-state";
>> +			idle-state-name = "rail-pc";
>> +			entry-latency-us = <274>;
>> +			exit-latency-us = <480>;
>> +			min-residency-us = <3934>;
>> +			arm,psci-suspend-param = <0x40000004>;
>> +			local-timer-stop;
>> +		};
>> +	};
>> +
>> +	domain-idle-states {
>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-l3-off";
>> +			entry-latency-us = <584>;
>> +			exit-latency-us = <2332>;
>> +			min-residency-us = <6118>;
>> +			arm,psci-suspend-param = <0x41000044>;
>> +		};
>> +
>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>> +			compatible = "domain-idle-state";
>> +			idle-state-name = "cluster-power-collapse";
>> +			entry-latency-us = <2893>;
>> +			exit-latency-us = <4023>;
>> +			min-residency-us = <9987>;
>> +			arm,psci-suspend-param = <0x41003344>;
>> +		};
>> +	};
>> +
>> +	firmware {
>> +		qcom_scm {
>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>> +			#reset-cells = <1>;
>> +		};
>> +	};
>> +
>> +	clk_virt: interconnect-0 {
>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	mc_virt: interconnect-1 {
>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>> +		#interconnect-cells = <2>;
>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>> +	};
>> +
>> +	memory@80000000 {
>> +		device_type = "memory";
>> +		/* We expect the bootloader to fill in the size */
>> +		reg = <0x0 0x80000000 0x0 0x0>;
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +
>> +		CPU_PD0: cpu-pd0 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD1: cpu-pd1 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD2: cpu-pd2 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CPU_PD3: cpu-pd3 {
>> +			#power-domain-cells = <0>;
>> +			power-domains = <&CLUSTER_PD>;
>> +			domain-idle-states = <&CPU_OFF>;
>> +		};
>> +
>> +		CLUSTER_PD: cluster-pd {
>> +			#power-domain-cells = <0>;
>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>> +		};
>> +	};
>> +
>> +	reserved_memory: reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: memory@80000000 {
>> +			no-map;
>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>> +		};
>> +
>> +		xbl_dt_log_mem: memory@80600000 {
>> +			no-map;
>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>> +		};
>> +
>> +		xbl_ramdump_mem: memory@80640000 {
>> +			no-map;
>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>> +		};
>> +
>> +		aop_image_mem: memory@80800000 {
>> +			no-map;
>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>> +		};
>> +
>> +		aop_cmd_db_mem: memory@80860000 {
>> +			compatible = "qcom,cmd-db";
>> +			no-map;
>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>> +		};
>> +
>> +		aop_config_mem: memory@80880000 {
>> +			no-map;
>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>> +		};
>> +
>> +		tme_crash_dump_mem: memory@808a0000 {
>> +			no-map;
>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>> +		};
>> +
>> +		tme_log_mem: memory@808e0000 {
>> +			no-map;
>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>> +		};
>> +
>> +		uefi_log_mem: memory@808e4000 {
>> +			no-map;
>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>> +		};
>> +
>> +		/* secdata region can be reused by apps */
>> +
>> +		smem_mem: memory@80900000 {
>> +			compatible = "qcom,smem";
>> +			no-map;
>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>> +			hwlocks = <&tcsr_mutex 3>;
>> +		};
>> +
>> +		cpucp_fw_mem: memory@80b00000 {
>> +			no-map;
>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>> +		};
>> +
>> +		xbl_sc_mem: memory@80c00000 {
>> +			no-map;
>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>> +		};
>> +
>> +		/* uefi region can be reused by apps */
>> +
>> +		tz_stat_mem: memory@81d00000 {
>> +			no-map;
>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>> +		};
>> +
>> +		tags_mem: memory@81e00000 {
>> +			no-map;
>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>> +		};
>> +
>> +		qtee_mem: memory@82300000 {
>> +			no-map;
>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>> +		};
>> +
>> +		ta_mem: memory@82800000 {
>> +			no-map;
>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>> +		};
>> +
>> +		fs1_mem: memory@83200000 {
>> +			no-map;
>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>> +		};
>> +
>> +		fs2_mem: memory@83600000 {
>> +			no-map;
>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>> +		};
>> +
>> +		fs3_mem: memory@83a00000 {
>> +			no-map;
>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>> +		};
>> +
>> +		/* Linux kernel image is loaded at 0x83e00000 */
>> +
>> +		ipa_fw_mem: memory@8be00000 {
>> +			no-map;
>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>> +		};
>> +
>> +		ipa_gsi_mem: memory@8be10000 {
>> +			no-map;
>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>> +		};
>> +
>> +		mpss_mem: memory@8c000000 {
>> +			no-map;
>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>> +		};
>> +
>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>> +			no-map;
>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>> +		};
>> +
>> +		tenx_mem: memory@a0000000 {
>> +			no-map;
>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>> +		};
>> +
>> +		oem_tenx_mem: memory@b9600000 {
>> +			no-map;
>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>> +		};
>> +
>> +		tenx_q6_buffer_mem: memory@c0000000 {
>> +			no-map;
>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>> +		};
>> +
>> +		ipa_buffer_mem: memory@c3200000 {
>> +			no-map;
>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>> +		};
>> +	};
>> +
>> +	soc: soc@0 {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges = <0 0 0 0 0x10 0>;
>> +		dma-ranges = <0 0 0 0 0x10 0>;
>> +		compatible = "simple-bus";
>> +
>> +		gcc: clock-controller@80000 {
>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>> +			clock-names = "bi_tcxo", "sleep_clk";
>> +		};
>> +
>> +		gpi_dma0: dma-controller@900000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> This won't work if you drop series [1]. It won't just fail the schema checks,
> but it would also fail to probe because the driver doesn't recognise it.
>
> I think you were told to rebase on [2], and didn't change your own series
> because it only applied to ee_offset = 0x0. There is another series [3] that
> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
> patches (in both series you sent) based on what was changed in that series.
>
> [1] https://lore.kernel.org/linux-arm-msm/a4db0335-33d8-76cd-6f89-b8bde603aedf@quicinc.com/
> [2] https://lore.kernel.org/linux-arm-msm/20221018005740.23952-1-mailingradian@gmail.com/T/
> [3] https://lore.kernel.org/linux-arm-msm/20221018230352.1238479-1-krzysztof.kozlowski@linaro.org/T/
Hi Richard; I was aware of this feedback and was planning to make that change in v3.
PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
what I meant by my final comment on [1].
>
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0x900000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0xf6 0x0>;
>> +			status = "ok";
>> +		};
>> +
>> +		qupv3_id_0: geniqup@9c0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0xe3 0x0>;
>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>> +			interconnect-names = "qup-core";
>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>> +			qcom,iommu-dma = "fastmap";
>> +			dma-coherent;
>> +
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart0: serial@980000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0x980000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart0_default>;
>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c1: i2c@984000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>> +					<&gpi_dma0 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi1: spi@984000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x984000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>> +					<&gpi_dma0 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c2: i2c@988000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>> +					<&gpi_dma0 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi2: spi@988000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x988000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>> +					<&gpi_dma0 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c3: i2c@98c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>> +					<&gpi_dma0 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi3: spi@98c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>> +					<&gpi_dma0 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c4: i2c@990000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>> +					<&gpi_dma0 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi4: spi@990000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x990000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>> +					<&gpi_dma0 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c5: i2c@994000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>> +					<&gpi_dma0 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi5: spi@994000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x994000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>> +					<&gpi_dma0 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c6: i2c@998000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>> +					<&gpi_dma0 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi6: spi@998000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x998000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>> +					<&gpi_dma0 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			uart7: serial@99c000 {
>> +				compatible = "qcom,geni-debug-uart";
>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		gpi_dma1: dma-controller@a00000  {
>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
> See above.
>
>> +			#dma-cells = <5>;
>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels = <12>;
>> +			dma-channel-mask = <0x3f>;
>> +			iommus = <&apps_smmu 0x116 0x0>;
>> +			status = "ok";
>> +		};
>> +
>> +		qupv3_id_1: geniqup@ac0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>> +			iommus = <&apps_smmu 0x103 0x0>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			uart8: serial@a80000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart8_default>;
>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c9: i2c@a84000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>> +					<&gpi_dma1 1 1 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi9: spi@a84000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>> +					<&gpi_dma1 1 1 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c10: i2c@a88000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>> +					<&gpi_dma1 1 2 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi10: spi@a88000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>> +					<&gpi_dma1 1 2 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c11: i2c@a8c000 {
>> +				compatible = "qcom,i2c-geni";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>> +					<&gpi_dma1 1 3 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi11: spi@a8c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>> +					<&gpi_dma1 1 3 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c12: i2c@a90000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>> +					<&gpi_dma1 1 4 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi12: spi@a90000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>> +					<&gpi_dma1 1 4 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c13: i2c@a94000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>> +					<&gpi_dma1 1 5 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			uart13: serial@a94000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_uart13_default>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi13: spi@a94000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>> +					<&gpi_dma1 1 5 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c14: i2c@a98000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>> +					<&gpi_dma1 1 6 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi14: spi@a98000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>> +					<&gpi_dma1 1 6 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c15: i2c@a9c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>> +					<&gpi_dma1 1 7 3 64 0>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi15: spi@a9c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>> +				interconnects =
>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>> +					<&gpi_dma1 1 7 1 64 0>;
>> +				dma-names = "tx", "rx";
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		system_noc: interconnect@1640000 {
>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>> +			#interconnect-cells = <1>;
>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>> +		};
>> +
>> +		tcsr_mutex: hwlock@1f40000 {
>> +			compatible = "qcom,tcsr-mutex";
>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>> +			#hwlock-cells = <1>;
>> +		};
>> +
>> +		pdc: interrupt-controller@b220000 {
>> +			compatible = "qcom,pdc";
>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>> +					  <94 609 31>, <125 63 1>;
>> +			#interrupt-cells = <2>;
>> +			interrupt-parent = <&intc>;
>> +			interrupt-controller;
>> +		};
>> +
>> +		spmi_bus: spmi@c400000 {
>> +			compatible = "qcom,spmi-pmic-arb";
>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>> +			      <0x0 0xc500000 0x0 0x400000>,
>> +			      <0x0 0xc440000 0x0 0x80000>,
>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>> +			      <0x0 0xc42d000 0x0 0x4000>;
>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> +			interrupt-names = "periph_irq";
>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,ee = <0>;
>> +			qcom,channel = <0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <4>;
>> +		};
>> +
>> +		tlmm: pinctrl@f000000 {
>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			gpio-ranges = <&tlmm 0 0 151>;
>> +			wakeup-parent = <&pdc>;
>> +
>> +			qup_uart0_default: qup-uart0-default-state {
>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>> +				function = "qup00";
>> +			};
>> +
>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>> +				pins = "gpio10", "gpio11";
>> +				function = "qup01";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>> +				pins = "gpio10", "gpio11", "gpio12";
>> +				function = "qup01";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi1_cs: qup-spi1-cs {
>> +				pins = "gpio13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>> +				pins = "gpio12", "gpio13";
>> +				function = "qup02";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>> +				pins = "gpio12", "gpio13", "gpio10";
>> +				function = "qup02";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi2_cs: qup-spi2-cs {
>> +				pins = "gpio11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>> +				pins = "gpio14", "gpio15";
>> +				function = "qup03";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>> +				pins = "gpio14", "gpio15", "gpio16";
>> +				function = "qup03";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi3_cs: qup-spi3-cs {
>> +				pins = "gpio17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>> +				pins = "gpio16", "gpio17";
>> +				function = "qup04";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>> +				pins = "gpio16", "gpio17", "gpio14";
>> +				function = "qup04";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi4_cs: qup-spi4-cs {
>> +				pins = "gpio15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>> +				pins = "gpio130", "gpio131";
>> +				function = "qup05";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>> +				pins = "gpio130", "gpio131", "gpio132";
>> +				function = "qup05";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi5_cs: qup-spi5-cs {
>> +				pins = "gpio133";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>> +				pins = "gpio132", "gpio133";
>> +				function = "qup06";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>> +				pins = "gpio132", "gpio133", "gpio130";
>> +				function = "qup06";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi6_cs: qup-spi6-cs {
>> +				pins = "gpio131";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_rx: qup-uart7-rx {
>> +				pins = "gpio135";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart7_tx: qup-uart7-tx  {
>> +				pins = "gpio134";
>> +				function = "qup07";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart8_default: qup-uart8-default {
>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>> +				function = "qup10";
>> +			};
>> +
>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>> +				pins = "gpio22", "gpio23";
>> +				function = "qup11";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>> +				pins = "gpio22", "gpio23", "gpio24";
>> +				function = "qup11";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi9_cs: qup-spi9-cs {
>> +				pins = "gpio25";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>> +				pins = "gpio24", "gpio25";
>> +				function = "qup12";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>> +				pins = "gpio24", "gpio25", "gpio22";
>> +				function = "qup12";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi10_cs: qup-spi10-cs {
>> +				pins = "gpio23";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>> +				pins = "gpio26", "gpio27";
>> +				function = "qup13";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>> +				pins = "gpio26", "gpio27", "gpio28";
>> +				function = "qup13";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi11_cs: qup-spi11-cs {
>> +				pins = "gpio29";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>> +				pins = "gpio28", "gpio29";
>> +				function = "qup14";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>> +				pins = "gpio28", "gpio29", "gpio26";
>> +				function = "qup14";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi12_cs: qup-spi12-cs {
>> +				pins = "gpio27";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>> +				pins = "gpio30", "gpio31";
>> +				function = "qup15";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>> +				pins = "gpio30", "gpio31", "gpio32";
>> +				function = "qup15";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi13_cs: qup-spi13-cs {
>> +				pins = "gpio33";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart13_default: qup-uart13-default {
>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>> +				function = "qup15";
>> +			};
>> +
>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>> +				pins = "gpio34", "gpio35";
>> +				function = "qup16";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>> +				pins = "gpio34", "gpio35", "gpio36";
>> +				function = "qup16";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi14_cs: qup-spi14-cs {
>> +				pins = "gpio37", "gpio38";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>> +				pins = "gpio40", "gpio41";
>> +				function = "qup17";
>> +				drive-strength = <2>;
>> +				bias-pulll-up;
>> +			};
>> +
>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>> +				pins = "gpio40", "gpio41", "gpio30";
>> +				function = "qup17";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_spi15_cs: qup-spi15-cs {
>> +				pins = "gpio31";
>> +				drive-strength = <6>;
>> +				bias-disable;
>> +			};
>> +		};
>> +
>> +		apps_smmu: apps-smmu@15000000 {
>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>> +				"arm,mmu-500";
>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <2>;
>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		intc: interrupt-controller@17200000 {
>> +			compatible = "arm,gic-v3";
>> +			#interrupt-cells = <3>;
>> +			interrupt-controller;
>> +			#redistributor-regions = <1>;
>> +			redistributor-stride = <0x0 0x20000>;
>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>> +		};
>> +
>> +		timer@17420000 {
>> +			compatible = "arm,armv7-timer-mem";
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>> +			clock-frequency = <19200000>;
>> +
>> +			frame@17421000 {
>> +				frame-number = <0>;
>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>> +				      <0x0 0x17422000 0x0 0x1000>;
>> +			};
>> +
>> +			frame@17423000 {
>> +				frame-number = <1>;
>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17425000 {
>> +				frame-number = <2>;
>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>> +				      <0x0 0x17426000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17427000 {
>> +				frame-number = <3>;
>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@17429000 {
>> +				frame-number = <4>;
>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742b000 {
>> +				frame-number = <5>;
>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@1742d000 {
>> +				frame-number = <6>;
>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		apps_rsc: rsc@17a00000 {
>> +			label = "apps_rsc";
>> +			compatible = "qcom,rpmh-rsc";
>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>> +			      <0x0 0x17a10000 0x0 0x10000>,
>> +			      <0x0 0x17a20000 0x0 0x10000>;
>> +			reg-names = "drv-0", "drv-1", "drv-2";
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> +			qcom,tcs-offset = <0xd00>;
>> +			qcom,drv-id = <2>;
>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>> +
>> +			apps_bcm_voter: bcm_voter {
>> +				compatible = "qcom,bcm-voter";
>> +			};
>> +
>> +			rpmhcc: clock-controller {
>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>> +				#clock-cells = <1>;
>> +				clock-names = "xo";
>> +				clocks = <&xo_board>;
>> +			};
>> +
>> +			rpmhpd: power-controller {
>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>> +				#power-domain-cells = <1>;
>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>> +
>> +				rpmhpd_opp_table: opp-table {
>> +					compatible = "operating-points-v2";
>> +
>> +					rpmhpd_opp_ret: opp1 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>> +					};
>> +
>> +					rpmhpd_opp_min_svs: opp2 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>> +					};
>> +
>> +					rpmhpd_opp_low_svs: opp3 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> +					};
>> +
>> +					rpmhpd_opp_svs: opp4 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> +					};
>> +
>> +					rpmhpd_opp_svs_l1: opp5 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> +					};
>> +
>> +					rpmhpd_opp_nom: opp6 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> +					};
>> +
>> +					rpmhpd_opp_nom_l1: opp7 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> +					};
>> +
>> +					rpmhpd_opp_nom_l2: opp8 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>> +					};
>> +
>> +					rpmhpd_opp_turbo: opp9 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>> +					};
>> +
>> +					rpmhpd_opp_turbo_l1: opp10 {
>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>> +					};
>> +				};
>> +			};
>> +		};
>> +
>> +		cpufreq_hw: cpufreq@17d91000 {
>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>> +				"qcom,cpufreq-epss";
>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>> +			reg-names = "freq-domain0";
>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>> +			clock-names = "xo", "alternate";
>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "dcvsh-irq-0";
>> +			#freq-domain-cells = <1>;
>> +		};
>> +
>> +		gem_noc: interconnect@19100000 {
>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>> +			#interconnect-cells = <1>;
>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>> +		};
>> +
>> +		arch_timer: timer {
>> +			compatible = "arm,armv8-timer";
>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> +			clock-frequency = <19200000>;
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>> new file mode 100644
>> index 000000000000..074fe126e85e
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>> @@ -0,0 +1,27 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include "qdu1000.dtsi"
>> +
>> +&reserved_memory {
>> +	/delete-node/ memory@a0000000;
>> +	/delete-node/ memory@b9600000;
>> +	/delete-node/ memory@c0000000;
>> +
>> +	oem_tenx_mem: memory@a0000000 {
>> +		no-map;
>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>> +	};
>> +
>> +	mpss_diag_buffer_mem: memory@aea00000 {
>> +		no-map;
>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>> +	};
>> +
>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>> +		no-map;
>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>> +	};
>> +};
>> -- 
>> 2.38.0
Thanks,
Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Richard Acayan]

> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>> to boot to shell with console on these SoCs.
>>>
>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>  2 files changed, 1673 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> new file mode 100644
>>> index 000000000000..777734b30f56
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> @@ -0,0 +1,1646 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> +	interrupt-parent = <&intc>;
>>> +
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	chosen: chosen { };
>>> +
>>> +	clocks {
>>> +		xo_board: xo-board {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <19200000>;
>>> +			clock-output-names = "xo_board";
>>> +			#clock-cells = <0>;
>>> +		};
>>> +
>>> +		sleep_clk: sleep-clk {
>>> +			compatible = "fixed-clock";
>>> +			clock-frequency = <32000>;
>>> +			#clock-cells = <0>;
>>> +		};
>>> +	};
>>> +
>>> +	cpus {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <0>;
>>> +
>>> +		CPU0: cpu@0 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x0>;
>>> +			enable-method = "psci";
>>> +			power-domain-names = "psci";
>>> +			power-domains = <&CPU_PD0>;
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_0>;
>>> +			L2_0: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +				L3_0: l3-cache {
>>> +					compatible = "cache";
>>> +				};
>>> +			};
>>> +		};
>>> +
>>> +		CPU1: cpu@100 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x100>;
>>> +			enable-method = "psci";
>>> +			power-domains = <&CPU_PD1>;
>>> +			power-domain-names = "psci";
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_100>;
>>> +			L2_100: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +			};
>>> +
>>> +		};
>>> +
>>> +		CPU2: cpu@200 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x200>;
>>> +			enable-method = "psci";
>>> +			power-domains = <&CPU_PD2>;
>>> +			power-domain-names = "psci";
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_200>;
>>> +			L2_200: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +			};
>>> +		};
>>> +
>>> +		CPU3: cpu@300 {
>>> +			device_type = "cpu";
>>> +			compatible = "arm,cortex-a55";
>>> +			reg = <0x0 0x300>;
>>> +			enable-method = "psci";
>>> +			power-domains = <&CPU_PD3>;
>>> +			power-domain-names = "psci";
>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>> +			next-level-cache = <&L2_300>;
>>> +			L2_300: l2-cache {
>>> +			      compatible = "cache";
>>> +			      next-level-cache = <&L3_0>;
>>> +			};
>>> +
>>> +		};
>>> +
>>> +		cpu-map {
>>> +			cluster0 {
>>> +				core0 {
>>> +					cpu = <&CPU0>;
>>> +				};
>>> +
>>> +				core1 {
>>> +					cpu = <&CPU1>;
>>> +				};
>>> +
>>> +				core2 {
>>> +					cpu = <&CPU2>;
>>> +				};
>>> +
>>> +				core3 {
>>> +					cpu = <&CPU3>;
>>> +				};
>>> +			};
>>> +		};
>>> +	};
>>> +
>>> +	idle-states {
>>> +		entry-method = "psci";
>>> +
>>> +		CPU_OFF: cpu-sleep-0 {
>>> +			compatible = "arm,idle-state";
>>> +			idle-state-name = "rail-pc";
>>> +			entry-latency-us = <274>;
>>> +			exit-latency-us = <480>;
>>> +			min-residency-us = <3934>;
>>> +			arm,psci-suspend-param = <0x40000004>;
>>> +			local-timer-stop;
>>> +		};
>>> +	};
>>> +
>>> +	domain-idle-states {
>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>> +			compatible = "domain-idle-state";
>>> +			idle-state-name = "cluster-l3-off";
>>> +			entry-latency-us = <584>;
>>> +			exit-latency-us = <2332>;
>>> +			min-residency-us = <6118>;
>>> +			arm,psci-suspend-param = <0x41000044>;
>>> +		};
>>> +
>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>> +			compatible = "domain-idle-state";
>>> +			idle-state-name = "cluster-power-collapse";
>>> +			entry-latency-us = <2893>;
>>> +			exit-latency-us = <4023>;
>>> +			min-residency-us = <9987>;
>>> +			arm,psci-suspend-param = <0x41003344>;
>>> +		};
>>> +	};
>>> +
>>> +	firmware {
>>> +		qcom_scm {
>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>> +			#reset-cells = <1>;
>>> +		};
>>> +	};
>>> +
>>> +	clk_virt: interconnect-0 {
>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>> +		#interconnect-cells = <2>;
>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>> +	};
>>> +
>>> +	mc_virt: interconnect-1 {
>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>> +		#interconnect-cells = <2>;
>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>> +	};
>>> +
>>> +	memory@80000000 {
>>> +		device_type = "memory";
>>> +		/* We expect the bootloader to fill in the size */
>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>> +	};
>>> +
>>> +	pmu {
>>> +		compatible = "arm,armv8-pmuv3";
>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>> +	};
>>> +
>>> +	psci {
>>> +		compatible = "arm,psci-1.0";
>>> +		method = "smc";
>>> +
>>> +		CPU_PD0: cpu-pd0 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CPU_PD1: cpu-pd1 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CPU_PD2: cpu-pd2 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CPU_PD3: cpu-pd3 {
>>> +			#power-domain-cells = <0>;
>>> +			power-domains = <&CLUSTER_PD>;
>>> +			domain-idle-states = <&CPU_OFF>;
>>> +		};
>>> +
>>> +		CLUSTER_PD: cluster-pd {
>>> +			#power-domain-cells = <0>;
>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>> +		};
>>> +	};
>>> +
>>> +	reserved_memory: reserved-memory {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges;
>>> +
>>> +		hyp_mem: memory@80000000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>> +		};
>>> +
>>> +		xbl_dt_log_mem: memory@80600000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>> +		};
>>> +
>>> +		xbl_ramdump_mem: memory@80640000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>> +		};
>>> +
>>> +		aop_image_mem: memory@80800000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>> +		};
>>> +
>>> +		aop_cmd_db_mem: memory@80860000 {
>>> +			compatible = "qcom,cmd-db";
>>> +			no-map;
>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>> +		};
>>> +
>>> +		aop_config_mem: memory@80880000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>> +		};
>>> +
>>> +		tme_crash_dump_mem: memory@808a0000 {
>>> +			no-map;
>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>> +		};
>>> +
>>> +		tme_log_mem: memory@808e0000 {
>>> +			no-map;
>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>> +		};
>>> +
>>> +		uefi_log_mem: memory@808e4000 {
>>> +			no-map;
>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>> +		};
>>> +
>>> +		/* secdata region can be reused by apps */
>>> +
>>> +		smem_mem: memory@80900000 {
>>> +			compatible = "qcom,smem";
>>> +			no-map;
>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>> +			hwlocks = <&tcsr_mutex 3>;
>>> +		};
>>> +
>>> +		cpucp_fw_mem: memory@80b00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>> +		};
>>> +
>>> +		xbl_sc_mem: memory@80c00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>> +		};
>>> +
>>> +		/* uefi region can be reused by apps */
>>> +
>>> +		tz_stat_mem: memory@81d00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>> +		};
>>> +
>>> +		tags_mem: memory@81e00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>> +		};
>>> +
>>> +		qtee_mem: memory@82300000 {
>>> +			no-map;
>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>> +		};
>>> +
>>> +		ta_mem: memory@82800000 {
>>> +			no-map;
>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>> +		};
>>> +
>>> +		fs1_mem: memory@83200000 {
>>> +			no-map;
>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>> +		};
>>> +
>>> +		fs2_mem: memory@83600000 {
>>> +			no-map;
>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>> +		};
>>> +
>>> +		fs3_mem: memory@83a00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>> +		};
>>> +
>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>> +
>>> +		ipa_fw_mem: memory@8be00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>> +		};
>>> +
>>> +		ipa_gsi_mem: memory@8be10000 {
>>> +			no-map;
>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>> +		};
>>> +
>>> +		mpss_mem: memory@8c000000 {
>>> +			no-map;
>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>> +		};
>>> +
>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>> +			no-map;
>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>> +		};
>>> +
>>> +		tenx_mem: memory@a0000000 {
>>> +			no-map;
>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>> +		};
>>> +
>>> +		oem_tenx_mem: memory@b9600000 {
>>> +			no-map;
>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>> +		};
>>> +
>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>> +			no-map;
>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>> +		};
>>> +
>>> +		ipa_buffer_mem: memory@c3200000 {
>>> +			no-map;
>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>> +		};
>>> +	};
>>> +
>>> +	soc: soc@0 {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		ranges = <0 0 0 0 0x10 0>;
>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>> +		compatible = "simple-bus";
>>> +
>>> +		gcc: clock-controller@80000 {
>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>> +			#clock-cells = <1>;
>>> +			#reset-cells = <1>;
>>> +			#power-domain-cells = <1>;
>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>> +		};
>>> +
>>> +		gpi_dma0: dma-controller@900000  {
>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> This won't work if you drop series [1]. It won't just fail the schema checks,
>> but it would also fail to probe because the driver doesn't recognise it.
>>
>> I think you were told to rebase on [2], and didn't change your own series
>> because it only applied to ee_offset = 0x0. There is another series [3] that
>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>> patches (in both series you sent) based on what was changed in that series.
>>
>> [1] https://lore.kernel.org/linux-arm-msm/a4db0335-33d8-76cd-6f89-b8bde603aedf@quicinc.com/
>> [2] https://lore.kernel.org/linux-arm-msm/20221018005740.23952-1-mailingradian@gmail.com/T/
>> [3] https://lore.kernel.org/linux-arm-msm/20221018230352.1238479-1-krzysztof.kozlowski@linaro.org/T/
> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
> what I meant by my final comment on [1].

Ok, I should have checked the date. What about the schema patch? It might be
helpful for the device tree cleanup efforts if you didn't add a compatible
without adding a corresponding entry in the device tree bindings.

I'm talking about updating this patch in particular:

https://lore.kernel.org/linux-arm-msm/20221014221102.7445-2-quic_molvera@quicinc.com/

We still add compat strings in dt-bindings even when there is a fallback,
because the schema is meant to specify every combination of compat strings
found in the device trees.

>>
>>> +			#dma-cells = <5>;
>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>> +			dma-channels = <12>;
>>> +			dma-channel-mask = <0x3f>;
>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>> +			status = "ok";
>>> +		};
>>> +
>>> +		qupv3_id_0: geniqup@9c0000 {
>>> +			compatible = "qcom,geni-se-qup";
>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>> +			clock-names = "m-ahb", "s-ahb";
>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>> +			interconnect-names = "qup-core";
>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>> +			qcom,iommu-dma = "fastmap";
>>> +			dma-coherent;
>>> +
>>> +			#address-cells = <2>;
>>> +			#size-cells = <2>;
>>> +			ranges;
>>> +			status = "disabled";
>>> +
>>> +			uart0: serial@980000 {
>>> +				compatible = "qcom,geni-uart";
>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart0_default>;
>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c1: i2c@984000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>> +					<&gpi_dma0 1 1 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi1: spi@984000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>> +					<&gpi_dma0 1 1 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c2: i2c@988000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>> +					<&gpi_dma0 1 2 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi2: spi@988000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>> +					<&gpi_dma0 1 2 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c3: i2c@98c000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>> +					<&gpi_dma0 1 3 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi3: spi@98c000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>> +					<&gpi_dma0 1 3 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c4: i2c@990000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>> +					<&gpi_dma0 1 4 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi4: spi@990000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>> +					<&gpi_dma0 1 4 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c5: i2c@994000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>> +					<&gpi_dma0 1 5 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi5: spi@994000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>> +					<&gpi_dma0 1 5 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c6: i2c@998000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>> +					<&gpi_dma0 1 6 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi6: spi@998000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>> +					<&gpi_dma0 1 6 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			uart7: serial@99c000 {
>>> +				compatible = "qcom,geni-debug-uart";
>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +		};
>>> +
>>> +		gpi_dma1: dma-controller@a00000  {
>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>> See above.
>>
>>> +			#dma-cells = <5>;
>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>> +			dma-channels = <12>;
>>> +			dma-channel-mask = <0x3f>;
>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>> +			status = "ok";
>>> +		};
>>> +
>>> +		qupv3_id_1: geniqup@ac0000 {
>>> +			compatible = "qcom,geni-se-qup";
>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>> +			#address-cells = <1>;
>>> +			#size-cells = <1>;
>>> +			clock-names = "m-ahb", "s-ahb";
>>> +
>>> +			ranges;
>>> +			status = "disabled";
>>> +
>>> +			uart8: serial@a80000 {
>>> +				compatible = "qcom,geni-uart";
>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart8_default>;
>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c9: i2c@a84000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>> +					<&gpi_dma1 1 1 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi9: spi@a84000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>> +					<&gpi_dma1 1 1 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c10: i2c@a88000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>> +					<&gpi_dma1 1 2 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi10: spi@a88000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>> +					<&gpi_dma1 1 2 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c11: i2c@a8c000 {
>>> +				compatible = "qcom,i2c-geni";
>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>> +					<&gpi_dma1 1 3 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi11: spi@a8c000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>> +					<&gpi_dma1 1 3 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c12: i2c@a90000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>> +					<&gpi_dma1 1 4 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi12: spi@a90000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>> +					<&gpi_dma1 1 4 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c13: i2c@a94000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>> +					<&gpi_dma1 1 5 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			uart13: serial@a94000 {
>>> +				compatible = "qcom,geni-uart";
>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_uart13_default>;
>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi13: spi@a94000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>> +					<&gpi_dma1 1 5 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c14: i2c@a98000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>> +					<&gpi_dma1 1 6 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi14: spi@a98000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>> +					<&gpi_dma1 1 6 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			i2c15: i2c@a9c000 {
>>> +				compatible = "qcom,geni-i2c";
>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>> +					<&gpi_dma1 1 7 3 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			spi15: spi@a9c000 {
>>> +				compatible = "qcom,geni-spi";
>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>> +				clock-names = "se";
>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>> +				interconnects =
>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>> +					<&gpi_dma1 1 7 1 64 0>;
>>> +				dma-names = "tx", "rx";
>>> +				status = "disabled";
>>> +			};
>>> +		};
>>> +
>>> +		system_noc: interconnect@1640000 {
>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>> +			#interconnect-cells = <1>;
>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>> +		};
>>> +
>>> +		tcsr_mutex: hwlock@1f40000 {
>>> +			compatible = "qcom,tcsr-mutex";
>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>> +			#hwlock-cells = <1>;
>>> +		};
>>> +
>>> +		pdc: interrupt-controller@b220000 {
>>> +			compatible = "qcom,pdc";
>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>> +					  <94 609 31>, <125 63 1>;
>>> +			#interrupt-cells = <2>;
>>> +			interrupt-parent = <&intc>;
>>> +			interrupt-controller;
>>> +		};
>>> +
>>> +		spmi_bus: spmi@c400000 {
>>> +			compatible = "qcom,spmi-pmic-arb";
>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>> +			interrupt-names = "periph_irq";
>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>> +			qcom,ee = <0>;
>>> +			qcom,channel = <0>;
>>> +			#address-cells = <2>;
>>> +			#size-cells = <0>;
>>> +			interrupt-controller;
>>> +			#interrupt-cells = <4>;
>>> +		};
>>> +
>>> +		tlmm: pinctrl@f000000 {
>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> +			gpio-controller;
>>> +			#gpio-cells = <2>;
>>> +			interrupt-controller;
>>> +			#interrupt-cells = <2>;
>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>> +			wakeup-parent = <&pdc>;
>>> +
>>> +			qup_uart0_default: qup-uart0-default-state {
>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>> +				function = "qup00";
>>> +			};
>>> +
>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>> +				pins = "gpio10", "gpio11";
>>> +				function = "qup01";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>> +				pins = "gpio10", "gpio11", "gpio12";
>>> +				function = "qup01";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi1_cs: qup-spi1-cs {
>>> +				pins = "gpio13";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>> +				pins = "gpio12", "gpio13";
>>> +				function = "qup02";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>> +				pins = "gpio12", "gpio13", "gpio10";
>>> +				function = "qup02";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi2_cs: qup-spi2-cs {
>>> +				pins = "gpio11";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>> +				pins = "gpio14", "gpio15";
>>> +				function = "qup03";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>> +				pins = "gpio14", "gpio15", "gpio16";
>>> +				function = "qup03";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi3_cs: qup-spi3-cs {
>>> +				pins = "gpio17";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>> +				pins = "gpio16", "gpio17";
>>> +				function = "qup04";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>> +				pins = "gpio16", "gpio17", "gpio14";
>>> +				function = "qup04";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi4_cs: qup-spi4-cs {
>>> +				pins = "gpio15";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>> +				pins = "gpio130", "gpio131";
>>> +				function = "qup05";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>> +				pins = "gpio130", "gpio131", "gpio132";
>>> +				function = "qup05";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi5_cs: qup-spi5-cs {
>>> +				pins = "gpio133";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>> +				pins = "gpio132", "gpio133";
>>> +				function = "qup06";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>> +				pins = "gpio132", "gpio133", "gpio130";
>>> +				function = "qup06";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi6_cs: qup-spi6-cs {
>>> +				pins = "gpio131";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart7_rx: qup-uart7-rx {
>>> +				pins = "gpio135";
>>> +				function = "qup07";
>>> +				drive-strength = <2>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart7_tx: qup-uart7-tx  {
>>> +				pins = "gpio134";
>>> +				function = "qup07";
>>> +				drive-strength = <2>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart8_default: qup-uart8-default {
>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>> +				function = "qup10";
>>> +			};
>>> +
>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>> +				pins = "gpio22", "gpio23";
>>> +				function = "qup11";
>>> +				drive-strength = <2>;
>>> +				bias-pull-up;
>>> +			};
>>> +
>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>> +				pins = "gpio22", "gpio23", "gpio24";
>>> +				function = "qup11";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi9_cs: qup-spi9-cs {
>>> +				pins = "gpio25";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>> +				pins = "gpio24", "gpio25";
>>> +				function = "qup12";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>> +				pins = "gpio24", "gpio25", "gpio22";
>>> +				function = "qup12";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi10_cs: qup-spi10-cs {
>>> +				pins = "gpio23";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>> +				pins = "gpio26", "gpio27";
>>> +				function = "qup13";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>> +				pins = "gpio26", "gpio27", "gpio28";
>>> +				function = "qup13";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi11_cs: qup-spi11-cs {
>>> +				pins = "gpio29";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>> +				pins = "gpio28", "gpio29";
>>> +				function = "qup14";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>> +				pins = "gpio28", "gpio29", "gpio26";
>>> +				function = "qup14";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi12_cs: qup-spi12-cs {
>>> +				pins = "gpio27";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>> +				pins = "gpio30", "gpio31";
>>> +				function = "qup15";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>> +				pins = "gpio30", "gpio31", "gpio32";
>>> +				function = "qup15";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi13_cs: qup-spi13-cs {
>>> +				pins = "gpio33";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_uart13_default: qup-uart13-default {
>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>> +				function = "qup15";
>>> +			};
>>> +
>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>> +				pins = "gpio34", "gpio35";
>>> +				function = "qup16";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>> +				pins = "gpio34", "gpio35", "gpio36";
>>> +				function = "qup16";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi14_cs: qup-spi14-cs {
>>> +				pins = "gpio37", "gpio38";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>> +				pins = "gpio40", "gpio41";
>>> +				function = "qup17";
>>> +				drive-strength = <2>;
>>> +				bias-pulll-up;
>>> +			};
>>> +
>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>> +				pins = "gpio40", "gpio41", "gpio30";
>>> +				function = "qup17";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +
>>> +			qup_spi15_cs: qup-spi15-cs {
>>> +				pins = "gpio31";
>>> +				drive-strength = <6>;
>>> +				bias-disable;
>>> +			};
>>> +		};
>>> +
>>> +		apps_smmu: apps-smmu@15000000 {
>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>> +				"arm,mmu-500";
>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>> +			#iommu-cells = <2>;
>>> +			#global-interrupts = <2>;
>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>> +		};
>>> +
>>> +		intc: interrupt-controller@17200000 {
>>> +			compatible = "arm,gic-v3";
>>> +			#interrupt-cells = <3>;
>>> +			interrupt-controller;
>>> +			#redistributor-regions = <1>;
>>> +			redistributor-stride = <0x0 0x20000>;
>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>> +		};
>>> +
>>> +		timer@17420000 {
>>> +			compatible = "arm,armv7-timer-mem";
>>> +			#address-cells = <2>;
>>> +			#size-cells = <2>;
>>> +			ranges;
>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>> +			clock-frequency = <19200000>;
>>> +
>>> +			frame@17421000 {
>>> +				frame-number = <0>;
>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>> +			};
>>> +
>>> +			frame@17423000 {
>>> +				frame-number = <1>;
>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@17425000 {
>>> +				frame-number = <2>;
>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@17427000 {
>>> +				frame-number = <3>;
>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@17429000 {
>>> +				frame-number = <4>;
>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@1742b000 {
>>> +				frame-number = <5>;
>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>> +			frame@1742d000 {
>>> +				frame-number = <6>;
>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>> +				status = "disabled";
>>> +			};
>>> +		};
>>> +
>>> +		apps_rsc: rsc@17a00000 {
>>> +			label = "apps_rsc";
>>> +			compatible = "qcom,rpmh-rsc";
>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>> +			qcom,tcs-offset = <0xd00>;
>>> +			qcom,drv-id = <2>;
>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>> +
>>> +			apps_bcm_voter: bcm_voter {
>>> +				compatible = "qcom,bcm-voter";
>>> +			};
>>> +
>>> +			rpmhcc: clock-controller {
>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>> +				#clock-cells = <1>;
>>> +				clock-names = "xo";
>>> +				clocks = <&xo_board>;
>>> +			};
>>> +
>>> +			rpmhpd: power-controller {
>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>> +				#power-domain-cells = <1>;
>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>> +
>>> +				rpmhpd_opp_table: opp-table {
>>> +					compatible = "operating-points-v2";
>>> +
>>> +					rpmhpd_opp_ret: opp1 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_min_svs: opp2 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_low_svs: opp3 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_svs: opp4 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_svs_l1: opp5 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_nom: opp6 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_nom_l1: opp7 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_nom_l2: opp8 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_turbo: opp9 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>> +					};
>>> +
>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>> +					};
>>> +				};
>>> +			};
>>> +		};
>>> +
>>> +		cpufreq_hw: cpufreq@17d91000 {
>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>> +				"qcom,cpufreq-epss";
>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>> +			reg-names = "freq-domain0";
>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>> +			clock-names = "xo", "alternate";
>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>> +			interrupt-names = "dcvsh-irq-0";
>>> +			#freq-domain-cells = <1>;
>>> +		};
>>> +
>>> +		gem_noc: interconnect@19100000 {
>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>> +			#interconnect-cells = <1>;
>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>> +		};
>>> +
>>> +		arch_timer: timer {
>>> +			compatible = "arm,armv8-timer";
>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>> +			clock-frequency = <19200000>;
>>> +		};
>>> +	};
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>> new file mode 100644
>>> index 000000000000..074fe126e85e
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>> @@ -0,0 +1,27 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include "qdu1000.dtsi"
>>> +
>>> +&reserved_memory {
>>> +	/delete-node/ memory@a0000000;
>>> +	/delete-node/ memory@b9600000;
>>> +	/delete-node/ memory@c0000000;
>>> +
>>> +	oem_tenx_mem: memory@a0000000 {
>>> +		no-map;
>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>> +	};
>>> +
>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>> +		no-map;
>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>> +	};
>>> +
>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>> +		no-map;
>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>> +	};
>>> +};
>>> -- 
>>> 2.38.0
> Thanks,
> Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

On 10/24/2022 3:28 PM, Richard Acayan wrote:
>> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>>> to boot to shell with console on these SoCs.
>>>>
>>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>>> ---
>>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>>  2 files changed, 1673 insertions(+)
>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>> new file mode 100644
>>>> index 000000000000..777734b30f56
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>> @@ -0,0 +1,1646 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>> +
>>>> +/ {
>>>> +	interrupt-parent = <&intc>;
>>>> +
>>>> +	#address-cells = <2>;
>>>> +	#size-cells = <2>;
>>>> +
>>>> +	chosen: chosen { };
>>>> +
>>>> +	clocks {
>>>> +		xo_board: xo-board {
>>>> +			compatible = "fixed-clock";
>>>> +			clock-frequency = <19200000>;
>>>> +			clock-output-names = "xo_board";
>>>> +			#clock-cells = <0>;
>>>> +		};
>>>> +
>>>> +		sleep_clk: sleep-clk {
>>>> +			compatible = "fixed-clock";
>>>> +			clock-frequency = <32000>;
>>>> +			#clock-cells = <0>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	cpus {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <0>;
>>>> +
>>>> +		CPU0: cpu@0 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x0>;
>>>> +			enable-method = "psci";
>>>> +			power-domain-names = "psci";
>>>> +			power-domains = <&CPU_PD0>;
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_0>;
>>>> +			L2_0: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +				L3_0: l3-cache {
>>>> +					compatible = "cache";
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +
>>>> +		CPU1: cpu@100 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x100>;
>>>> +			enable-method = "psci";
>>>> +			power-domains = <&CPU_PD1>;
>>>> +			power-domain-names = "psci";
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_100>;
>>>> +			L2_100: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +			};
>>>> +
>>>> +		};
>>>> +
>>>> +		CPU2: cpu@200 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x200>;
>>>> +			enable-method = "psci";
>>>> +			power-domains = <&CPU_PD2>;
>>>> +			power-domain-names = "psci";
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_200>;
>>>> +			L2_200: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +			};
>>>> +		};
>>>> +
>>>> +		CPU3: cpu@300 {
>>>> +			device_type = "cpu";
>>>> +			compatible = "arm,cortex-a55";
>>>> +			reg = <0x0 0x300>;
>>>> +			enable-method = "psci";
>>>> +			power-domains = <&CPU_PD3>;
>>>> +			power-domain-names = "psci";
>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>> +			next-level-cache = <&L2_300>;
>>>> +			L2_300: l2-cache {
>>>> +			      compatible = "cache";
>>>> +			      next-level-cache = <&L3_0>;
>>>> +			};
>>>> +
>>>> +		};
>>>> +
>>>> +		cpu-map {
>>>> +			cluster0 {
>>>> +				core0 {
>>>> +					cpu = <&CPU0>;
>>>> +				};
>>>> +
>>>> +				core1 {
>>>> +					cpu = <&CPU1>;
>>>> +				};
>>>> +
>>>> +				core2 {
>>>> +					cpu = <&CPU2>;
>>>> +				};
>>>> +
>>>> +				core3 {
>>>> +					cpu = <&CPU3>;
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +	};
>>>> +
>>>> +	idle-states {
>>>> +		entry-method = "psci";
>>>> +
>>>> +		CPU_OFF: cpu-sleep-0 {
>>>> +			compatible = "arm,idle-state";
>>>> +			idle-state-name = "rail-pc";
>>>> +			entry-latency-us = <274>;
>>>> +			exit-latency-us = <480>;
>>>> +			min-residency-us = <3934>;
>>>> +			arm,psci-suspend-param = <0x40000004>;
>>>> +			local-timer-stop;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	domain-idle-states {
>>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>>> +			compatible = "domain-idle-state";
>>>> +			idle-state-name = "cluster-l3-off";
>>>> +			entry-latency-us = <584>;
>>>> +			exit-latency-us = <2332>;
>>>> +			min-residency-us = <6118>;
>>>> +			arm,psci-suspend-param = <0x41000044>;
>>>> +		};
>>>> +
>>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>> +			compatible = "domain-idle-state";
>>>> +			idle-state-name = "cluster-power-collapse";
>>>> +			entry-latency-us = <2893>;
>>>> +			exit-latency-us = <4023>;
>>>> +			min-residency-us = <9987>;
>>>> +			arm,psci-suspend-param = <0x41003344>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	firmware {
>>>> +		qcom_scm {
>>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>>> +			#reset-cells = <1>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	clk_virt: interconnect-0 {
>>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>>> +		#interconnect-cells = <2>;
>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +	};
>>>> +
>>>> +	mc_virt: interconnect-1 {
>>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>>> +		#interconnect-cells = <2>;
>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +	};
>>>> +
>>>> +	memory@80000000 {
>>>> +		device_type = "memory";
>>>> +		/* We expect the bootloader to fill in the size */
>>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>>> +	};
>>>> +
>>>> +	pmu {
>>>> +		compatible = "arm,armv8-pmuv3";
>>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>> +	};
>>>> +
>>>> +	psci {
>>>> +		compatible = "arm,psci-1.0";
>>>> +		method = "smc";
>>>> +
>>>> +		CPU_PD0: cpu-pd0 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CPU_PD1: cpu-pd1 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CPU_PD2: cpu-pd2 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CPU_PD3: cpu-pd3 {
>>>> +			#power-domain-cells = <0>;
>>>> +			power-domains = <&CLUSTER_PD>;
>>>> +			domain-idle-states = <&CPU_OFF>;
>>>> +		};
>>>> +
>>>> +		CLUSTER_PD: cluster-pd {
>>>> +			#power-domain-cells = <0>;
>>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	reserved_memory: reserved-memory {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <2>;
>>>> +		ranges;
>>>> +
>>>> +		hyp_mem: memory@80000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>>> +		};
>>>> +
>>>> +		xbl_dt_log_mem: memory@80600000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>>> +		};
>>>> +
>>>> +		xbl_ramdump_mem: memory@80640000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>>> +		};
>>>> +
>>>> +		aop_image_mem: memory@80800000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>>> +		};
>>>> +
>>>> +		aop_cmd_db_mem: memory@80860000 {
>>>> +			compatible = "qcom,cmd-db";
>>>> +			no-map;
>>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>>> +		};
>>>> +
>>>> +		aop_config_mem: memory@80880000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>>> +		};
>>>> +
>>>> +		tme_crash_dump_mem: memory@808a0000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>>> +		};
>>>> +
>>>> +		tme_log_mem: memory@808e0000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>>> +		};
>>>> +
>>>> +		uefi_log_mem: memory@808e4000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>>> +		};
>>>> +
>>>> +		/* secdata region can be reused by apps */
>>>> +
>>>> +		smem_mem: memory@80900000 {
>>>> +			compatible = "qcom,smem";
>>>> +			no-map;
>>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>>> +			hwlocks = <&tcsr_mutex 3>;
>>>> +		};
>>>> +
>>>> +		cpucp_fw_mem: memory@80b00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>>> +		};
>>>> +
>>>> +		xbl_sc_mem: memory@80c00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>>> +		};
>>>> +
>>>> +		/* uefi region can be reused by apps */
>>>> +
>>>> +		tz_stat_mem: memory@81d00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>>> +		};
>>>> +
>>>> +		tags_mem: memory@81e00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>>> +		};
>>>> +
>>>> +		qtee_mem: memory@82300000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>>> +		};
>>>> +
>>>> +		ta_mem: memory@82800000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>>> +		};
>>>> +
>>>> +		fs1_mem: memory@83200000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>>> +		};
>>>> +
>>>> +		fs2_mem: memory@83600000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>>> +		};
>>>> +
>>>> +		fs3_mem: memory@83a00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>>> +		};
>>>> +
>>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>>> +
>>>> +		ipa_fw_mem: memory@8be00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>>> +		};
>>>> +
>>>> +		ipa_gsi_mem: memory@8be10000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>>> +		};
>>>> +
>>>> +		mpss_mem: memory@8c000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>>> +		};
>>>> +
>>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>>> +		};
>>>> +
>>>> +		tenx_mem: memory@a0000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>>> +		};
>>>> +
>>>> +		oem_tenx_mem: memory@b9600000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>>> +		};
>>>> +
>>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>>> +		};
>>>> +
>>>> +		ipa_buffer_mem: memory@c3200000 {
>>>> +			no-map;
>>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	soc: soc@0 {
>>>> +		#address-cells = <2>;
>>>> +		#size-cells = <2>;
>>>> +		ranges = <0 0 0 0 0x10 0>;
>>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>>> +		compatible = "simple-bus";
>>>> +
>>>> +		gcc: clock-controller@80000 {
>>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>>> +			#clock-cells = <1>;
>>>> +			#reset-cells = <1>;
>>>> +			#power-domain-cells = <1>;
>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>>> +		};
>>>> +
>>>> +		gpi_dma0: dma-controller@900000  {
>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>> This won't work if you drop series [1]. It won't just fail the schema checks,
>>> but it would also fail to probe because the driver doesn't recognise it.
>>>
>>> I think you were told to rebase on [2], and didn't change your own series
>>> because it only applied to ee_offset = 0x0. There is another series [3] that
>>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>>> patches (in both series you sent) based on what was changed in that series.
>>>
>>> [1] https://lore.kernel.org/linux-arm-msm/a4db0335-33d8-76cd-6f89-b8bde603aedf@quicinc.com/
>>> [2] https://lore.kernel.org/linux-arm-msm/20221018005740.23952-1-mailingradian@gmail.com/T/
>>> [3] https://lore.kernel.org/linux-arm-msm/20221018230352.1238479-1-krzysztof.kozlowski@linaro.org/T/
>> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
>> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
>> what I meant by my final comment on [1].
> Ok, I should have checked the date. What about the schema patch? It might be
> helpful for the device tree cleanup efforts if you didn't add a compatible
> without adding a corresponding entry in the device tree bindings.
>
> I'm talking about updating this patch in particular:
>
> https://lore.kernel.org/linux-arm-msm/20221014221102.7445-2-quic_molvera@quicinc.com/
>
> We still add compat strings in dt-bindings even when there is a fallback,
> because the schema is meant to specify every combination of compat strings
> found in the device trees.
That will be dropped as well. I'll use the sdm845 compat string instead of what's here.
>
>>>> +			#dma-cells = <5>;
>>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			dma-channels = <12>;
>>>> +			dma-channel-mask = <0x3f>;
>>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>>> +			status = "ok";
>>>> +		};
>>>> +
>>>> +		qupv3_id_0: geniqup@9c0000 {
>>>> +			compatible = "qcom,geni-se-qup";
>>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>>> +			clock-names = "m-ahb", "s-ahb";
>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>>> +			interconnect-names = "qup-core";
>>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>>> +			qcom,iommu-dma = "fastmap";
>>>> +			dma-coherent;
>>>> +
>>>> +			#address-cells = <2>;
>>>> +			#size-cells = <2>;
>>>> +			ranges;
>>>> +			status = "disabled";
>>>> +
>>>> +			uart0: serial@980000 {
>>>> +				compatible = "qcom,geni-uart";
>>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart0_default>;
>>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c1: i2c@984000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>>> +					<&gpi_dma0 1 1 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi1: spi@984000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>>> +					<&gpi_dma0 1 1 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c2: i2c@988000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>>> +					<&gpi_dma0 1 2 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi2: spi@988000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>>> +					<&gpi_dma0 1 2 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c3: i2c@98c000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>>> +					<&gpi_dma0 1 3 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi3: spi@98c000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>>> +					<&gpi_dma0 1 3 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c4: i2c@990000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>>> +					<&gpi_dma0 1 4 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi4: spi@990000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>>> +					<&gpi_dma0 1 4 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c5: i2c@994000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>>> +					<&gpi_dma0 1 5 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi5: spi@994000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>>> +					<&gpi_dma0 1 5 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c6: i2c@998000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>>> +					<&gpi_dma0 1 6 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi6: spi@998000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>>> +					<&gpi_dma0 1 6 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			uart7: serial@99c000 {
>>>> +				compatible = "qcom,geni-debug-uart";
>>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +		};
>>>> +
>>>> +		gpi_dma1: dma-controller@a00000  {
>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>> See above.
>>>
>>>> +			#dma-cells = <5>;
>>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			dma-channels = <12>;
>>>> +			dma-channel-mask = <0x3f>;
>>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>>> +			status = "ok";
>>>> +		};
>>>> +
>>>> +		qupv3_id_1: geniqup@ac0000 {
>>>> +			compatible = "qcom,geni-se-qup";
>>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>>> +			#address-cells = <1>;
>>>> +			#size-cells = <1>;
>>>> +			clock-names = "m-ahb", "s-ahb";
>>>> +
>>>> +			ranges;
>>>> +			status = "disabled";
>>>> +
>>>> +			uart8: serial@a80000 {
>>>> +				compatible = "qcom,geni-uart";
>>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart8_default>;
>>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c9: i2c@a84000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>>> +					<&gpi_dma1 1 1 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi9: spi@a84000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>>> +					<&gpi_dma1 1 1 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c10: i2c@a88000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>>> +					<&gpi_dma1 1 2 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi10: spi@a88000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>>> +					<&gpi_dma1 1 2 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c11: i2c@a8c000 {
>>>> +				compatible = "qcom,i2c-geni";
>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>>> +					<&gpi_dma1 1 3 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi11: spi@a8c000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>>> +					<&gpi_dma1 1 3 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c12: i2c@a90000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>>> +					<&gpi_dma1 1 4 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi12: spi@a90000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>>> +					<&gpi_dma1 1 4 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c13: i2c@a94000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>>> +					<&gpi_dma1 1 5 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			uart13: serial@a94000 {
>>>> +				compatible = "qcom,geni-uart";
>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_uart13_default>;
>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi13: spi@a94000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>>> +					<&gpi_dma1 1 5 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c14: i2c@a98000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>>> +					<&gpi_dma1 1 6 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi14: spi@a98000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>>> +					<&gpi_dma1 1 6 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			i2c15: i2c@a9c000 {
>>>> +				compatible = "qcom,geni-i2c";
>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>>> +					<&gpi_dma1 1 7 3 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			spi15: spi@a9c000 {
>>>> +				compatible = "qcom,geni-spi";
>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>> +				#address-cells = <1>;
>>>> +				#size-cells = <0>;
>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				clock-names = "se";
>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>> +				interconnects =
>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>>> +					<&gpi_dma1 1 7 1 64 0>;
>>>> +				dma-names = "tx", "rx";
>>>> +				status = "disabled";
>>>> +			};
>>>> +		};
>>>> +
>>>> +		system_noc: interconnect@1640000 {
>>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>>> +			#interconnect-cells = <1>;
>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +		};
>>>> +
>>>> +		tcsr_mutex: hwlock@1f40000 {
>>>> +			compatible = "qcom,tcsr-mutex";
>>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>>> +			#hwlock-cells = <1>;
>>>> +		};
>>>> +
>>>> +		pdc: interrupt-controller@b220000 {
>>>> +			compatible = "qcom,pdc";
>>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>>> +					  <94 609 31>, <125 63 1>;
>>>> +			#interrupt-cells = <2>;
>>>> +			interrupt-parent = <&intc>;
>>>> +			interrupt-controller;
>>>> +		};
>>>> +
>>>> +		spmi_bus: spmi@c400000 {
>>>> +			compatible = "qcom,spmi-pmic-arb";
>>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>>> +			interrupt-names = "periph_irq";
>>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			qcom,ee = <0>;
>>>> +			qcom,channel = <0>;
>>>> +			#address-cells = <2>;
>>>> +			#size-cells = <0>;
>>>> +			interrupt-controller;
>>>> +			#interrupt-cells = <4>;
>>>> +		};
>>>> +
>>>> +		tlmm: pinctrl@f000000 {
>>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			gpio-controller;
>>>> +			#gpio-cells = <2>;
>>>> +			interrupt-controller;
>>>> +			#interrupt-cells = <2>;
>>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>>> +			wakeup-parent = <&pdc>;
>>>> +
>>>> +			qup_uart0_default: qup-uart0-default-state {
>>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>>> +				function = "qup00";
>>>> +			};
>>>> +
>>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>>> +				pins = "gpio10", "gpio11";
>>>> +				function = "qup01";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>>> +				pins = "gpio10", "gpio11", "gpio12";
>>>> +				function = "qup01";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi1_cs: qup-spi1-cs {
>>>> +				pins = "gpio13";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>>> +				pins = "gpio12", "gpio13";
>>>> +				function = "qup02";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>>> +				pins = "gpio12", "gpio13", "gpio10";
>>>> +				function = "qup02";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi2_cs: qup-spi2-cs {
>>>> +				pins = "gpio11";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>>> +				pins = "gpio14", "gpio15";
>>>> +				function = "qup03";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>>> +				pins = "gpio14", "gpio15", "gpio16";
>>>> +				function = "qup03";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi3_cs: qup-spi3-cs {
>>>> +				pins = "gpio17";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>>> +				pins = "gpio16", "gpio17";
>>>> +				function = "qup04";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>>> +				pins = "gpio16", "gpio17", "gpio14";
>>>> +				function = "qup04";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi4_cs: qup-spi4-cs {
>>>> +				pins = "gpio15";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>>> +				pins = "gpio130", "gpio131";
>>>> +				function = "qup05";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>>> +				pins = "gpio130", "gpio131", "gpio132";
>>>> +				function = "qup05";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi5_cs: qup-spi5-cs {
>>>> +				pins = "gpio133";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>>> +				pins = "gpio132", "gpio133";
>>>> +				function = "qup06";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>>> +				pins = "gpio132", "gpio133", "gpio130";
>>>> +				function = "qup06";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi6_cs: qup-spi6-cs {
>>>> +				pins = "gpio131";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart7_rx: qup-uart7-rx {
>>>> +				pins = "gpio135";
>>>> +				function = "qup07";
>>>> +				drive-strength = <2>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart7_tx: qup-uart7-tx  {
>>>> +				pins = "gpio134";
>>>> +				function = "qup07";
>>>> +				drive-strength = <2>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart8_default: qup-uart8-default {
>>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>>> +				function = "qup10";
>>>> +			};
>>>> +
>>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>>> +				pins = "gpio22", "gpio23";
>>>> +				function = "qup11";
>>>> +				drive-strength = <2>;
>>>> +				bias-pull-up;
>>>> +			};
>>>> +
>>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>>> +				pins = "gpio22", "gpio23", "gpio24";
>>>> +				function = "qup11";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi9_cs: qup-spi9-cs {
>>>> +				pins = "gpio25";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>>> +				pins = "gpio24", "gpio25";
>>>> +				function = "qup12";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>>> +				pins = "gpio24", "gpio25", "gpio22";
>>>> +				function = "qup12";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi10_cs: qup-spi10-cs {
>>>> +				pins = "gpio23";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>>> +				pins = "gpio26", "gpio27";
>>>> +				function = "qup13";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>>> +				pins = "gpio26", "gpio27", "gpio28";
>>>> +				function = "qup13";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi11_cs: qup-spi11-cs {
>>>> +				pins = "gpio29";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>>> +				pins = "gpio28", "gpio29";
>>>> +				function = "qup14";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>>> +				pins = "gpio28", "gpio29", "gpio26";
>>>> +				function = "qup14";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi12_cs: qup-spi12-cs {
>>>> +				pins = "gpio27";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>>> +				pins = "gpio30", "gpio31";
>>>> +				function = "qup15";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>>> +				pins = "gpio30", "gpio31", "gpio32";
>>>> +				function = "qup15";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi13_cs: qup-spi13-cs {
>>>> +				pins = "gpio33";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_uart13_default: qup-uart13-default {
>>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>>> +				function = "qup15";
>>>> +			};
>>>> +
>>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>>> +				pins = "gpio34", "gpio35";
>>>> +				function = "qup16";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>>> +				pins = "gpio34", "gpio35", "gpio36";
>>>> +				function = "qup16";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi14_cs: qup-spi14-cs {
>>>> +				pins = "gpio37", "gpio38";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>>> +				pins = "gpio40", "gpio41";
>>>> +				function = "qup17";
>>>> +				drive-strength = <2>;
>>>> +				bias-pulll-up;
>>>> +			};
>>>> +
>>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>>> +				pins = "gpio40", "gpio41", "gpio30";
>>>> +				function = "qup17";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +
>>>> +			qup_spi15_cs: qup-spi15-cs {
>>>> +				pins = "gpio31";
>>>> +				drive-strength = <6>;
>>>> +				bias-disable;
>>>> +			};
>>>> +		};
>>>> +
>>>> +		apps_smmu: apps-smmu@15000000 {
>>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>>> +				"arm,mmu-500";
>>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>>> +			#iommu-cells = <2>;
>>>> +			#global-interrupts = <2>;
>>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>> +		};
>>>> +
>>>> +		intc: interrupt-controller@17200000 {
>>>> +			compatible = "arm,gic-v3";
>>>> +			#interrupt-cells = <3>;
>>>> +			interrupt-controller;
>>>> +			#redistributor-regions = <1>;
>>>> +			redistributor-stride = <0x0 0x20000>;
>>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>>> +		};
>>>> +
>>>> +		timer@17420000 {
>>>> +			compatible = "arm,armv7-timer-mem";
>>>> +			#address-cells = <2>;
>>>> +			#size-cells = <2>;
>>>> +			ranges;
>>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>>> +			clock-frequency = <19200000>;
>>>> +
>>>> +			frame@17421000 {
>>>> +				frame-number = <0>;
>>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>>> +			};
>>>> +
>>>> +			frame@17423000 {
>>>> +				frame-number = <1>;
>>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@17425000 {
>>>> +				frame-number = <2>;
>>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@17427000 {
>>>> +				frame-number = <3>;
>>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@17429000 {
>>>> +				frame-number = <4>;
>>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@1742b000 {
>>>> +				frame-number = <5>;
>>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +
>>>> +			frame@1742d000 {
>>>> +				frame-number = <6>;
>>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>>> +				status = "disabled";
>>>> +			};
>>>> +		};
>>>> +
>>>> +		apps_rsc: rsc@17a00000 {
>>>> +			label = "apps_rsc";
>>>> +			compatible = "qcom,rpmh-rsc";
>>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			qcom,tcs-offset = <0xd00>;
>>>> +			qcom,drv-id = <2>;
>>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>>> +
>>>> +			apps_bcm_voter: bcm_voter {
>>>> +				compatible = "qcom,bcm-voter";
>>>> +			};
>>>> +
>>>> +			rpmhcc: clock-controller {
>>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>>> +				#clock-cells = <1>;
>>>> +				clock-names = "xo";
>>>> +				clocks = <&xo_board>;
>>>> +			};
>>>> +
>>>> +			rpmhpd: power-controller {
>>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>>> +				#power-domain-cells = <1>;
>>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>>> +
>>>> +				rpmhpd_opp_table: opp-table {
>>>> +					compatible = "operating-points-v2";
>>>> +
>>>> +					rpmhpd_opp_ret: opp1 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_min_svs: opp2 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_low_svs: opp3 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_svs: opp4 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_svs_l1: opp5 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_nom: opp6 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_nom_l1: opp7 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_nom_l2: opp8 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_turbo: opp9 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>>> +					};
>>>> +
>>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>>> +					};
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +
>>>> +		cpufreq_hw: cpufreq@17d91000 {
>>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>>> +				"qcom,cpufreq-epss";
>>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>>> +			reg-names = "freq-domain0";
>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>>> +			clock-names = "xo", "alternate";
>>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			interrupt-names = "dcvsh-irq-0";
>>>> +			#freq-domain-cells = <1>;
>>>> +		};
>>>> +
>>>> +		gem_noc: interconnect@19100000 {
>>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>>> +			#interconnect-cells = <1>;
>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>> +		};
>>>> +
>>>> +		arch_timer: timer {
>>>> +			compatible = "arm,armv8-timer";
>>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>> +			clock-frequency = <19200000>;
>>>> +		};
>>>> +	};
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>> new file mode 100644
>>>> index 000000000000..074fe126e85e
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>> @@ -0,0 +1,27 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include "qdu1000.dtsi"
>>>> +
>>>> +&reserved_memory {
>>>> +	/delete-node/ memory@a0000000;
>>>> +	/delete-node/ memory@b9600000;
>>>> +	/delete-node/ memory@c0000000;
>>>> +
>>>> +	oem_tenx_mem: memory@a0000000 {
>>>> +		no-map;
>>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>>> +	};
>>>> +
>>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>>> +		no-map;
>>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>>> +	};
>>>> +
>>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>>> +		no-map;
>>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>>> +	};
>>>> +};
>>>> -- 
>>>> 2.38.0
>> Thanks,
>> Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Richard Acayan]

> On 10/24/2022 3:28 PM, Richard Acayan wrote:
>>> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>>>> to boot to shell with console on these SoCs.
>>>>>
>>>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>>>> ---
>>>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>>>  2 files changed, 1673 insertions(+)
>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>> new file mode 100644
>>>>> index 000000000000..777734b30f56
>>>>> --- /dev/null
>>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>> @@ -0,0 +1,1646 @@
>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>> +/*
>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>> + */
>>>>> +
>>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>>> +
>>>>> +/ {
>>>>> +	interrupt-parent = <&intc>;
>>>>> +
>>>>> +	#address-cells = <2>;
>>>>> +	#size-cells = <2>;
>>>>> +
>>>>> +	chosen: chosen { };
>>>>> +
>>>>> +	clocks {
>>>>> +		xo_board: xo-board {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <19200000>;
>>>>> +			clock-output-names = "xo_board";
>>>>> +			#clock-cells = <0>;
>>>>> +		};
>>>>> +
>>>>> +		sleep_clk: sleep-clk {
>>>>> +			compatible = "fixed-clock";
>>>>> +			clock-frequency = <32000>;
>>>>> +			#clock-cells = <0>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	cpus {
>>>>> +		#address-cells = <2>;
>>>>> +		#size-cells = <0>;
>>>>> +
>>>>> +		CPU0: cpu@0 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x0>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domain-names = "psci";
>>>>> +			power-domains = <&CPU_PD0>;
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_0>;
>>>>> +			L2_0: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +				L3_0: l3-cache {
>>>>> +					compatible = "cache";
>>>>> +				};
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		CPU1: cpu@100 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x100>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domains = <&CPU_PD1>;
>>>>> +			power-domain-names = "psci";
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_100>;
>>>>> +			L2_100: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +			};
>>>>> +
>>>>> +		};
>>>>> +
>>>>> +		CPU2: cpu@200 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x200>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domains = <&CPU_PD2>;
>>>>> +			power-domain-names = "psci";
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_200>;
>>>>> +			L2_200: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		CPU3: cpu@300 {
>>>>> +			device_type = "cpu";
>>>>> +			compatible = "arm,cortex-a55";
>>>>> +			reg = <0x0 0x300>;
>>>>> +			enable-method = "psci";
>>>>> +			power-domains = <&CPU_PD3>;
>>>>> +			power-domain-names = "psci";
>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>> +			next-level-cache = <&L2_300>;
>>>>> +			L2_300: l2-cache {
>>>>> +			      compatible = "cache";
>>>>> +			      next-level-cache = <&L3_0>;
>>>>> +			};
>>>>> +
>>>>> +		};
>>>>> +
>>>>> +		cpu-map {
>>>>> +			cluster0 {
>>>>> +				core0 {
>>>>> +					cpu = <&CPU0>;
>>>>> +				};
>>>>> +
>>>>> +				core1 {
>>>>> +					cpu = <&CPU1>;
>>>>> +				};
>>>>> +
>>>>> +				core2 {
>>>>> +					cpu = <&CPU2>;
>>>>> +				};
>>>>> +
>>>>> +				core3 {
>>>>> +					cpu = <&CPU3>;
>>>>> +				};
>>>>> +			};
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	idle-states {
>>>>> +		entry-method = "psci";
>>>>> +
>>>>> +		CPU_OFF: cpu-sleep-0 {
>>>>> +			compatible = "arm,idle-state";
>>>>> +			idle-state-name = "rail-pc";
>>>>> +			entry-latency-us = <274>;
>>>>> +			exit-latency-us = <480>;
>>>>> +			min-residency-us = <3934>;
>>>>> +			arm,psci-suspend-param = <0x40000004>;
>>>>> +			local-timer-stop;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	domain-idle-states {
>>>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>>>> +			compatible = "domain-idle-state";
>>>>> +			idle-state-name = "cluster-l3-off";
>>>>> +			entry-latency-us = <584>;
>>>>> +			exit-latency-us = <2332>;
>>>>> +			min-residency-us = <6118>;
>>>>> +			arm,psci-suspend-param = <0x41000044>;
>>>>> +		};
>>>>> +
>>>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>>> +			compatible = "domain-idle-state";
>>>>> +			idle-state-name = "cluster-power-collapse";
>>>>> +			entry-latency-us = <2893>;
>>>>> +			exit-latency-us = <4023>;
>>>>> +			min-residency-us = <9987>;
>>>>> +			arm,psci-suspend-param = <0x41003344>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	firmware {
>>>>> +		qcom_scm {
>>>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>>>> +			#reset-cells = <1>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	clk_virt: interconnect-0 {
>>>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>>>> +		#interconnect-cells = <2>;
>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +	};
>>>>> +
>>>>> +	mc_virt: interconnect-1 {
>>>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>>>> +		#interconnect-cells = <2>;
>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +	};
>>>>> +
>>>>> +	memory@80000000 {
>>>>> +		device_type = "memory";
>>>>> +		/* We expect the bootloader to fill in the size */
>>>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>>>> +	};
>>>>> +
>>>>> +	pmu {
>>>>> +		compatible = "arm,armv8-pmuv3";
>>>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +	};
>>>>> +
>>>>> +	psci {
>>>>> +		compatible = "arm,psci-1.0";
>>>>> +		method = "smc";
>>>>> +
>>>>> +		CPU_PD0: cpu-pd0 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CPU_PD1: cpu-pd1 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CPU_PD2: cpu-pd2 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CPU_PD3: cpu-pd3 {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>> +		};
>>>>> +
>>>>> +		CLUSTER_PD: cluster-pd {
>>>>> +			#power-domain-cells = <0>;
>>>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	reserved_memory: reserved-memory {
>>>>> +		#address-cells = <2>;
>>>>> +		#size-cells = <2>;
>>>>> +		ranges;
>>>>> +
>>>>> +		hyp_mem: memory@80000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>>>> +		};
>>>>> +
>>>>> +		xbl_dt_log_mem: memory@80600000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>>>> +		};
>>>>> +
>>>>> +		xbl_ramdump_mem: memory@80640000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>>>> +		};
>>>>> +
>>>>> +		aop_image_mem: memory@80800000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>>>> +		};
>>>>> +
>>>>> +		aop_cmd_db_mem: memory@80860000 {
>>>>> +			compatible = "qcom,cmd-db";
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>>>> +		};
>>>>> +
>>>>> +		aop_config_mem: memory@80880000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>>>> +		};
>>>>> +
>>>>> +		tme_crash_dump_mem: memory@808a0000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>>>> +		};
>>>>> +
>>>>> +		tme_log_mem: memory@808e0000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>>>> +		};
>>>>> +
>>>>> +		uefi_log_mem: memory@808e4000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>>>> +		};
>>>>> +
>>>>> +		/* secdata region can be reused by apps */
>>>>> +
>>>>> +		smem_mem: memory@80900000 {
>>>>> +			compatible = "qcom,smem";
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>>>> +			hwlocks = <&tcsr_mutex 3>;
>>>>> +		};
>>>>> +
>>>>> +		cpucp_fw_mem: memory@80b00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>>>> +		};
>>>>> +
>>>>> +		xbl_sc_mem: memory@80c00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>>>> +		};
>>>>> +
>>>>> +		/* uefi region can be reused by apps */
>>>>> +
>>>>> +		tz_stat_mem: memory@81d00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>>>> +		};
>>>>> +
>>>>> +		tags_mem: memory@81e00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>>>> +		};
>>>>> +
>>>>> +		qtee_mem: memory@82300000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>>>> +		};
>>>>> +
>>>>> +		ta_mem: memory@82800000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>>>> +		};
>>>>> +
>>>>> +		fs1_mem: memory@83200000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>>>> +		};
>>>>> +
>>>>> +		fs2_mem: memory@83600000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>>>> +		};
>>>>> +
>>>>> +		fs3_mem: memory@83a00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>>>> +		};
>>>>> +
>>>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>>>> +
>>>>> +		ipa_fw_mem: memory@8be00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>>>> +		};
>>>>> +
>>>>> +		ipa_gsi_mem: memory@8be10000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>>>> +		};
>>>>> +
>>>>> +		mpss_mem: memory@8c000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>>>> +		};
>>>>> +
>>>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>>>> +		};
>>>>> +
>>>>> +		tenx_mem: memory@a0000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>>>> +		};
>>>>> +
>>>>> +		oem_tenx_mem: memory@b9600000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>>>> +		};
>>>>> +
>>>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>>>> +		};
>>>>> +
>>>>> +		ipa_buffer_mem: memory@c3200000 {
>>>>> +			no-map;
>>>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>>>> +		};
>>>>> +	};
>>>>> +
>>>>> +	soc: soc@0 {
>>>>> +		#address-cells = <2>;
>>>>> +		#size-cells = <2>;
>>>>> +		ranges = <0 0 0 0 0x10 0>;
>>>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>>>> +		compatible = "simple-bus";
>>>>> +
>>>>> +		gcc: clock-controller@80000 {
>>>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>>>> +			#clock-cells = <1>;
>>>>> +			#reset-cells = <1>;
>>>>> +			#power-domain-cells = <1>;
>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>>>> +		};
>>>>> +
>>>>> +		gpi_dma0: dma-controller@900000  {
>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>> This won't work if you drop series [1]. It won't just fail the schema checks,
>>>> but it would also fail to probe because the driver doesn't recognise it.
>>>>
>>>> I think you were told to rebase on [2], and didn't change your own series
>>>> because it only applied to ee_offset = 0x0. There is another series [3] that
>>>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>>>> patches (in both series you sent) based on what was changed in that series.
>>>>
>>>> [1] https://lore.kernel.org/linux-arm-msm/a4db0335-33d8-76cd-6f89-b8bde603aedf@quicinc.com/
>>>> [2] https://lore.kernel.org/linux-arm-msm/20221018005740.23952-1-mailingradian@gmail.com/T/
>>>> [3] https://lore.kernel.org/linux-arm-msm/20221018230352.1238479-1-krzysztof.kozlowski@linaro.org/T/
>>> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
>>> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
>>> what I meant by my final comment on [1].
>> Ok, I should have checked the date. What about the schema patch? It might be
>> helpful for the device tree cleanup efforts if you didn't add a compatible
>> without adding a corresponding entry in the device tree bindings.
>>
>> I'm talking about updating this patch in particular:
>>
>> https://lore.kernel.org/linux-arm-msm/20221014221102.7445-2-quic_molvera@quicinc.com/
>>
>> We still add compat strings in dt-bindings even when there is a fallback,
>> because the schema is meant to specify every combination of compat strings
>> found in the device trees.
> That will be dropped as well. I'll use the sdm845 compat string instead of what's here.

I hope you're talking about sm6350, because sdm845 has an ee_offset of 0. But if
you think the maintainers will accept this, then it shouldn't be a problem. I
just thought that you would copy what the other platforms are doing, which
required a schema patch.

Example:

Documentation/devicetree/bindings/dma/qcom,gpi.yaml:

    properties:
      compatible:
        oneOf:
          - enum:
              - qcom,sdm845-gpi-dma
              - qcom,sm6350-gpi-dma
          - items:
              - enum:
                  - qcom,qdu1000-gpi-dma
                  - qcom,sc7280-gpi-dma
                  - qcom,sm8350-gpi-dma
                  - qcom,sm8450-gpi-dma
              - const: qcom,sm6350-gpi-dma

and

    compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";

would pass schema checks.

Documentation/devicetree/bindings/dma/qcom,gpi.yaml:

    properties:
      compatible:
        oneOf:
          - enum:
              - qcom,sdm845-gpi-dma
              - qcom,sm6350-gpi-dma
          - items:
              - enum:
                  - qcom,sc7280-gpi-dma
                  - qcom,sm8350-gpi-dma
                  - qcom,sm8450-gpi-dma
              - const: qcom,sm6350-gpi-dma

and

    compatible = "qcom,sm6350-gpi-dma";

would also pass schema checks.

Documentation/devicetree/bindings/dma/qcom,gpi.yaml:

    properties:
      compatible:
        oneOf:
          - enum:
              - qcom,sdm845-gpi-dma
              - qcom,sm6350-gpi-dma
          - items:
              - enum:
                  - qcom,sc7280-gpi-dma
                  - qcom,sm8350-gpi-dma
                  - qcom,sm8450-gpi-dma
              - const: qcom,sm6350-gpi-dma

and

    compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";

would not pass schema checks.

>>
>>>>> +			#dma-cells = <5>;
>>>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			dma-channels = <12>;
>>>>> +			dma-channel-mask = <0x3f>;
>>>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>>>> +			status = "ok";
>>>>> +		};
>>>>> +
>>>>> +		qupv3_id_0: geniqup@9c0000 {
>>>>> +			compatible = "qcom,geni-se-qup";
>>>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>>>> +			interconnect-names = "qup-core";
>>>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>>>> +			qcom,iommu-dma = "fastmap";
>>>>> +			dma-coherent;
>>>>> +
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <2>;
>>>>> +			ranges;
>>>>> +			status = "disabled";
>>>>> +
>>>>> +			uart0: serial@980000 {
>>>>> +				compatible = "qcom,geni-uart";
>>>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart0_default>;
>>>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c1: i2c@984000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>>>> +					<&gpi_dma0 1 1 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi1: spi@984000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>>>> +					<&gpi_dma0 1 1 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c2: i2c@988000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>>>> +					<&gpi_dma0 1 2 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi2: spi@988000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>>>> +					<&gpi_dma0 1 2 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c3: i2c@98c000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>>>> +					<&gpi_dma0 1 3 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi3: spi@98c000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>>>> +					<&gpi_dma0 1 3 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c4: i2c@990000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>>>> +					<&gpi_dma0 1 4 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi4: spi@990000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>>>> +					<&gpi_dma0 1 4 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c5: i2c@994000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>>>> +					<&gpi_dma0 1 5 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi5: spi@994000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>>>> +					<&gpi_dma0 1 5 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c6: i2c@998000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>>>> +					<&gpi_dma0 1 6 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi6: spi@998000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>>>> +					<&gpi_dma0 1 6 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			uart7: serial@99c000 {
>>>>> +				compatible = "qcom,geni-debug-uart";
>>>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		gpi_dma1: dma-controller@a00000  {
>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>> See above.
>>>>
>>>>> +			#dma-cells = <5>;
>>>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			dma-channels = <12>;
>>>>> +			dma-channel-mask = <0x3f>;
>>>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>>>> +			status = "ok";
>>>>> +		};
>>>>> +
>>>>> +		qupv3_id_1: geniqup@ac0000 {
>>>>> +			compatible = "qcom,geni-se-qup";
>>>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>>>> +			#address-cells = <1>;
>>>>> +			#size-cells = <1>;
>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>> +
>>>>> +			ranges;
>>>>> +			status = "disabled";
>>>>> +
>>>>> +			uart8: serial@a80000 {
>>>>> +				compatible = "qcom,geni-uart";
>>>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart8_default>;
>>>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c9: i2c@a84000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>>>> +					<&gpi_dma1 1 1 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi9: spi@a84000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>>>> +					<&gpi_dma1 1 1 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c10: i2c@a88000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>>>> +					<&gpi_dma1 1 2 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi10: spi@a88000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>>>> +					<&gpi_dma1 1 2 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c11: i2c@a8c000 {
>>>>> +				compatible = "qcom,i2c-geni";
>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>>>> +					<&gpi_dma1 1 3 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi11: spi@a8c000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>>>> +					<&gpi_dma1 1 3 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c12: i2c@a90000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>>>> +					<&gpi_dma1 1 4 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi12: spi@a90000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>>>> +					<&gpi_dma1 1 4 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c13: i2c@a94000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>>>> +					<&gpi_dma1 1 5 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			uart13: serial@a94000 {
>>>>> +				compatible = "qcom,geni-uart";
>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_uart13_default>;
>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi13: spi@a94000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>>>> +					<&gpi_dma1 1 5 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c14: i2c@a98000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>>>> +					<&gpi_dma1 1 6 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi14: spi@a98000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>>>> +					<&gpi_dma1 1 6 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			i2c15: i2c@a9c000 {
>>>>> +				compatible = "qcom,geni-i2c";
>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>>>> +					<&gpi_dma1 1 7 3 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			spi15: spi@a9c000 {
>>>>> +				compatible = "qcom,geni-spi";
>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>> +				#address-cells = <1>;
>>>>> +				#size-cells = <0>;
>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				clock-names = "se";
>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>> +				interconnects =
>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>> +				pinctrl-names = "default";
>>>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>>>> +					<&gpi_dma1 1 7 1 64 0>;
>>>>> +				dma-names = "tx", "rx";
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		system_noc: interconnect@1640000 {
>>>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>>>> +			#interconnect-cells = <1>;
>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +		};
>>>>> +
>>>>> +		tcsr_mutex: hwlock@1f40000 {
>>>>> +			compatible = "qcom,tcsr-mutex";
>>>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>>>> +			#hwlock-cells = <1>;
>>>>> +		};
>>>>> +
>>>>> +		pdc: interrupt-controller@b220000 {
>>>>> +			compatible = "qcom,pdc";
>>>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>>>> +					  <94 609 31>, <125 63 1>;
>>>>> +			#interrupt-cells = <2>;
>>>>> +			interrupt-parent = <&intc>;
>>>>> +			interrupt-controller;
>>>>> +		};
>>>>> +
>>>>> +		spmi_bus: spmi@c400000 {
>>>>> +			compatible = "qcom,spmi-pmic-arb";
>>>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>>>> +			interrupt-names = "periph_irq";
>>>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			qcom,ee = <0>;
>>>>> +			qcom,channel = <0>;
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <0>;
>>>>> +			interrupt-controller;
>>>>> +			#interrupt-cells = <4>;
>>>>> +		};
>>>>> +
>>>>> +		tlmm: pinctrl@f000000 {
>>>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			gpio-controller;
>>>>> +			#gpio-cells = <2>;
>>>>> +			interrupt-controller;
>>>>> +			#interrupt-cells = <2>;
>>>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>>>> +			wakeup-parent = <&pdc>;
>>>>> +
>>>>> +			qup_uart0_default: qup-uart0-default-state {
>>>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>>>> +				function = "qup00";
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>>>> +				pins = "gpio10", "gpio11";
>>>>> +				function = "qup01";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>>>> +				pins = "gpio10", "gpio11", "gpio12";
>>>>> +				function = "qup01";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi1_cs: qup-spi1-cs {
>>>>> +				pins = "gpio13";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>>>> +				pins = "gpio12", "gpio13";
>>>>> +				function = "qup02";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>>>> +				pins = "gpio12", "gpio13", "gpio10";
>>>>> +				function = "qup02";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi2_cs: qup-spi2-cs {
>>>>> +				pins = "gpio11";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>>>> +				pins = "gpio14", "gpio15";
>>>>> +				function = "qup03";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>>>> +				pins = "gpio14", "gpio15", "gpio16";
>>>>> +				function = "qup03";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi3_cs: qup-spi3-cs {
>>>>> +				pins = "gpio17";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>>>> +				pins = "gpio16", "gpio17";
>>>>> +				function = "qup04";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>>>> +				pins = "gpio16", "gpio17", "gpio14";
>>>>> +				function = "qup04";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi4_cs: qup-spi4-cs {
>>>>> +				pins = "gpio15";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>>>> +				pins = "gpio130", "gpio131";
>>>>> +				function = "qup05";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>>>> +				pins = "gpio130", "gpio131", "gpio132";
>>>>> +				function = "qup05";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi5_cs: qup-spi5-cs {
>>>>> +				pins = "gpio133";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>>>> +				pins = "gpio132", "gpio133";
>>>>> +				function = "qup06";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>>>> +				pins = "gpio132", "gpio133", "gpio130";
>>>>> +				function = "qup06";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi6_cs: qup-spi6-cs {
>>>>> +				pins = "gpio131";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart7_rx: qup-uart7-rx {
>>>>> +				pins = "gpio135";
>>>>> +				function = "qup07";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart7_tx: qup-uart7-tx  {
>>>>> +				pins = "gpio134";
>>>>> +				function = "qup07";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart8_default: qup-uart8-default {
>>>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>>>> +				function = "qup10";
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>>>> +				pins = "gpio22", "gpio23";
>>>>> +				function = "qup11";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pull-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>>>> +				pins = "gpio22", "gpio23", "gpio24";
>>>>> +				function = "qup11";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi9_cs: qup-spi9-cs {
>>>>> +				pins = "gpio25";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>>>> +				pins = "gpio24", "gpio25";
>>>>> +				function = "qup12";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>>>> +				pins = "gpio24", "gpio25", "gpio22";
>>>>> +				function = "qup12";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi10_cs: qup-spi10-cs {
>>>>> +				pins = "gpio23";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>>>> +				pins = "gpio26", "gpio27";
>>>>> +				function = "qup13";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>>>> +				pins = "gpio26", "gpio27", "gpio28";
>>>>> +				function = "qup13";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi11_cs: qup-spi11-cs {
>>>>> +				pins = "gpio29";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>>>> +				pins = "gpio28", "gpio29";
>>>>> +				function = "qup14";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>>>> +				pins = "gpio28", "gpio29", "gpio26";
>>>>> +				function = "qup14";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi12_cs: qup-spi12-cs {
>>>>> +				pins = "gpio27";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>>>> +				pins = "gpio30", "gpio31";
>>>>> +				function = "qup15";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>>>> +				pins = "gpio30", "gpio31", "gpio32";
>>>>> +				function = "qup15";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi13_cs: qup-spi13-cs {
>>>>> +				pins = "gpio33";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_uart13_default: qup-uart13-default {
>>>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>>>> +				function = "qup15";
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>>>> +				pins = "gpio34", "gpio35";
>>>>> +				function = "qup16";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>>>> +				pins = "gpio34", "gpio35", "gpio36";
>>>>> +				function = "qup16";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi14_cs: qup-spi14-cs {
>>>>> +				pins = "gpio37", "gpio38";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>>>> +				pins = "gpio40", "gpio41";
>>>>> +				function = "qup17";
>>>>> +				drive-strength = <2>;
>>>>> +				bias-pulll-up;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>>>> +				pins = "gpio40", "gpio41", "gpio30";
>>>>> +				function = "qup17";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +
>>>>> +			qup_spi15_cs: qup-spi15-cs {
>>>>> +				pins = "gpio31";
>>>>> +				drive-strength = <6>;
>>>>> +				bias-disable;
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		apps_smmu: apps-smmu@15000000 {
>>>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>>>> +				"arm,mmu-500";
>>>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>>>> +			#iommu-cells = <2>;
>>>>> +			#global-interrupts = <2>;
>>>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +		};
>>>>> +
>>>>> +		intc: interrupt-controller@17200000 {
>>>>> +			compatible = "arm,gic-v3";
>>>>> +			#interrupt-cells = <3>;
>>>>> +			interrupt-controller;
>>>>> +			#redistributor-regions = <1>;
>>>>> +			redistributor-stride = <0x0 0x20000>;
>>>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>>>> +		};
>>>>> +
>>>>> +		timer@17420000 {
>>>>> +			compatible = "arm,armv7-timer-mem";
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <2>;
>>>>> +			ranges;
>>>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>>>> +			clock-frequency = <19200000>;
>>>>> +
>>>>> +			frame@17421000 {
>>>>> +				frame-number = <0>;
>>>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>>>> +			};
>>>>> +
>>>>> +			frame@17423000 {
>>>>> +				frame-number = <1>;
>>>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@17425000 {
>>>>> +				frame-number = <2>;
>>>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@17427000 {
>>>>> +				frame-number = <3>;
>>>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@17429000 {
>>>>> +				frame-number = <4>;
>>>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@1742b000 {
>>>>> +				frame-number = <5>;
>>>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +
>>>>> +			frame@1742d000 {
>>>>> +				frame-number = <6>;
>>>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>>>> +				status = "disabled";
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		apps_rsc: rsc@17a00000 {
>>>>> +			label = "apps_rsc";
>>>>> +			compatible = "qcom,rpmh-rsc";
>>>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			qcom,tcs-offset = <0xd00>;
>>>>> +			qcom,drv-id = <2>;
>>>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>>>> +
>>>>> +			apps_bcm_voter: bcm_voter {
>>>>> +				compatible = "qcom,bcm-voter";
>>>>> +			};
>>>>> +
>>>>> +			rpmhcc: clock-controller {
>>>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>>>> +				#clock-cells = <1>;
>>>>> +				clock-names = "xo";
>>>>> +				clocks = <&xo_board>;
>>>>> +			};
>>>>> +
>>>>> +			rpmhpd: power-controller {
>>>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>>>> +				#power-domain-cells = <1>;
>>>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>>>> +
>>>>> +				rpmhpd_opp_table: opp-table {
>>>>> +					compatible = "operating-points-v2";
>>>>> +
>>>>> +					rpmhpd_opp_ret: opp1 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_min_svs: opp2 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_low_svs: opp3 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_svs: opp4 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_svs_l1: opp5 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_nom: opp6 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_nom_l1: opp7 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_nom_l2: opp8 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_turbo: opp9 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>>>> +					};
>>>>> +
>>>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>>>> +					};
>>>>> +				};
>>>>> +			};
>>>>> +		};
>>>>> +
>>>>> +		cpufreq_hw: cpufreq@17d91000 {
>>>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>>>> +				"qcom,cpufreq-epss";
>>>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>>>> +			reg-names = "freq-domain0";
>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>>>> +			clock-names = "xo", "alternate";
>>>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +			interrupt-names = "dcvsh-irq-0";
>>>>> +			#freq-domain-cells = <1>;
>>>>> +		};
>>>>> +
>>>>> +		gem_noc: interconnect@19100000 {
>>>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>>>> +			#interconnect-cells = <1>;
>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>> +		};
>>>>> +
>>>>> +		arch_timer: timer {
>>>>> +			compatible = "arm,armv8-timer";
>>>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>>> +			clock-frequency = <19200000>;
>>>>> +		};
>>>>> +	};
>>>>> +};
>>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>> new file mode 100644
>>>>> index 000000000000..074fe126e85e
>>>>> --- /dev/null
>>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>> @@ -0,0 +1,27 @@
>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>> +/*
>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>> + */
>>>>> +
>>>>> +#include "qdu1000.dtsi"
>>>>> +
>>>>> +&reserved_memory {
>>>>> +	/delete-node/ memory@a0000000;
>>>>> +	/delete-node/ memory@b9600000;
>>>>> +	/delete-node/ memory@c0000000;
>>>>> +
>>>>> +	oem_tenx_mem: memory@a0000000 {
>>>>> +		no-map;
>>>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>>>> +	};
>>>>> +
>>>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>>>> +		no-map;
>>>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>>>> +	};
>>>>> +
>>>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>>>> +		no-map;
>>>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>>>> +	};
>>>>> +};
>>>>> -- 
>>>>> 2.38.0
>>> Thanks,
>>> Melody

Re: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs

[Melody Olvera]

On 10/24/2022 3:51 PM, Richard Acayan wrote:
>> On 10/24/2022 3:28 PM, Richard Acayan wrote:
>>>> On 10/23/2022 5:53 PM, Richard Acayan wrote:
>>>>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>>>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>>>>> to boot to shell with console on these SoCs.
>>>>>>
>>>>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>>>>> ---
>>>>>>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>>>>>  arch/arm64/boot/dts/qcom/qru1000.dtsi |   27 +
>>>>>>  2 files changed, 1673 insertions(+)
>>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>> new file mode 100644
>>>>>> index 000000000000..777734b30f56
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>>>>> @@ -0,0 +1,1646 @@
>>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>>> +/*
>>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>>>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>>>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>>>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>>>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>>>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>>>>> +
>>>>>> +/ {
>>>>>> +	interrupt-parent = <&intc>;
>>>>>> +
>>>>>> +	#address-cells = <2>;
>>>>>> +	#size-cells = <2>;
>>>>>> +
>>>>>> +	chosen: chosen { };
>>>>>> +
>>>>>> +	clocks {
>>>>>> +		xo_board: xo-board {
>>>>>> +			compatible = "fixed-clock";
>>>>>> +			clock-frequency = <19200000>;
>>>>>> +			clock-output-names = "xo_board";
>>>>>> +			#clock-cells = <0>;
>>>>>> +		};
>>>>>> +
>>>>>> +		sleep_clk: sleep-clk {
>>>>>> +			compatible = "fixed-clock";
>>>>>> +			clock-frequency = <32000>;
>>>>>> +			#clock-cells = <0>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	cpus {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <0>;
>>>>>> +
>>>>>> +		CPU0: cpu@0 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x0>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domain-names = "psci";
>>>>>> +			power-domains = <&CPU_PD0>;
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_0>;
>>>>>> +			L2_0: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +				L3_0: l3-cache {
>>>>>> +					compatible = "cache";
>>>>>> +				};
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU1: cpu@100 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x100>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domains = <&CPU_PD1>;
>>>>>> +			power-domain-names = "psci";
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_100>;
>>>>>> +			L2_100: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +			};
>>>>>> +
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU2: cpu@200 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x200>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domains = <&CPU_PD2>;
>>>>>> +			power-domain-names = "psci";
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_200>;
>>>>>> +			L2_200: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU3: cpu@300 {
>>>>>> +			device_type = "cpu";
>>>>>> +			compatible = "arm,cortex-a55";
>>>>>> +			reg = <0x0 0x300>;
>>>>>> +			enable-method = "psci";
>>>>>> +			power-domains = <&CPU_PD3>;
>>>>>> +			power-domain-names = "psci";
>>>>>> +			qcom,freq-domains = <&cpufreq_hw 0>;
>>>>>> +			next-level-cache = <&L2_300>;
>>>>>> +			L2_300: l2-cache {
>>>>>> +			      compatible = "cache";
>>>>>> +			      next-level-cache = <&L3_0>;
>>>>>> +			};
>>>>>> +
>>>>>> +		};
>>>>>> +
>>>>>> +		cpu-map {
>>>>>> +			cluster0 {
>>>>>> +				core0 {
>>>>>> +					cpu = <&CPU0>;
>>>>>> +				};
>>>>>> +
>>>>>> +				core1 {
>>>>>> +					cpu = <&CPU1>;
>>>>>> +				};
>>>>>> +
>>>>>> +				core2 {
>>>>>> +					cpu = <&CPU2>;
>>>>>> +				};
>>>>>> +
>>>>>> +				core3 {
>>>>>> +					cpu = <&CPU3>;
>>>>>> +				};
>>>>>> +			};
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	idle-states {
>>>>>> +		entry-method = "psci";
>>>>>> +
>>>>>> +		CPU_OFF: cpu-sleep-0 {
>>>>>> +			compatible = "arm,idle-state";
>>>>>> +			idle-state-name = "rail-pc";
>>>>>> +			entry-latency-us = <274>;
>>>>>> +			exit-latency-us = <480>;
>>>>>> +			min-residency-us = <3934>;
>>>>>> +			arm,psci-suspend-param = <0x40000004>;
>>>>>> +			local-timer-stop;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	domain-idle-states {
>>>>>> +		CLUSTER_SLEEP_0: cluster-sleep-0 {
>>>>>> +			compatible = "domain-idle-state";
>>>>>> +			idle-state-name = "cluster-l3-off";
>>>>>> +			entry-latency-us = <584>;
>>>>>> +			exit-latency-us = <2332>;
>>>>>> +			min-residency-us = <6118>;
>>>>>> +			arm,psci-suspend-param = <0x41000044>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CLUSTER_SLEEP_1: cluster-sleep-1 {
>>>>>> +			compatible = "domain-idle-state";
>>>>>> +			idle-state-name = "cluster-power-collapse";
>>>>>> +			entry-latency-us = <2893>;
>>>>>> +			exit-latency-us = <4023>;
>>>>>> +			min-residency-us = <9987>;
>>>>>> +			arm,psci-suspend-param = <0x41003344>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	firmware {
>>>>>> +		qcom_scm {
>>>>>> +			compatible = "qcom,scm-qdu100", "qcom.scm-qru1000", "qcom,scm";
>>>>>> +			#reset-cells = <1>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	clk_virt: interconnect-0 {
>>>>>> +		compatible = "qcom,qdu1000-clk-virt", "qcom,qru1000-clk-virt";
>>>>>> +		#interconnect-cells = <2>;
>>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +	};
>>>>>> +
>>>>>> +	mc_virt: interconnect-1 {
>>>>>> +		compatible = "qcom,qdu1000-mc-virt", "qcom,qru1000-mc-virt";
>>>>>> +		#interconnect-cells = <2>;
>>>>>> +		qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +	};
>>>>>> +
>>>>>> +	memory@80000000 {
>>>>>> +		device_type = "memory";
>>>>>> +		/* We expect the bootloader to fill in the size */
>>>>>> +		reg = <0x0 0x80000000 0x0 0x0>;
>>>>>> +	};
>>>>>> +
>>>>>> +	pmu {
>>>>>> +		compatible = "arm,armv8-pmuv3";
>>>>>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +	};
>>>>>> +
>>>>>> +	psci {
>>>>>> +		compatible = "arm,psci-1.0";
>>>>>> +		method = "smc";
>>>>>> +
>>>>>> +		CPU_PD0: cpu-pd0 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU_PD1: cpu-pd1 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU_PD2: cpu-pd2 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CPU_PD3: cpu-pd3 {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			power-domains = <&CLUSTER_PD>;
>>>>>> +			domain-idle-states = <&CPU_OFF>;
>>>>>> +		};
>>>>>> +
>>>>>> +		CLUSTER_PD: cluster-pd {
>>>>>> +			#power-domain-cells = <0>;
>>>>>> +			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	reserved_memory: reserved-memory {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <2>;
>>>>>> +		ranges;
>>>>>> +
>>>>>> +		hyp_mem: memory@80000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80000000 0x0 0x600000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		xbl_dt_log_mem: memory@80600000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80600000 0x0 0x40000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		xbl_ramdump_mem: memory@80640000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80640000 0x0 0x1c0000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		aop_image_mem: memory@80800000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80800000 0x0 0x60000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		aop_cmd_db_mem: memory@80860000 {
>>>>>> +			compatible = "qcom,cmd-db";
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80860000 0x0 0x20000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		aop_config_mem: memory@80880000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80880000 0x0 0x20000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tme_crash_dump_mem: memory@808a0000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x808a0000 0x0 0x40000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tme_log_mem: memory@808e0000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x808e0000 0x0 0x4000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		uefi_log_mem: memory@808e4000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x808e4000 0x0 0x10000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		/* secdata region can be reused by apps */
>>>>>> +
>>>>>> +		smem_mem: memory@80900000 {
>>>>>> +			compatible = "qcom,smem";
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80900000 0x0 0x200000>;
>>>>>> +			hwlocks = <&tcsr_mutex 3>;
>>>>>> +		};
>>>>>> +
>>>>>> +		cpucp_fw_mem: memory@80b00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80b00000 0x0 0x100000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		xbl_sc_mem: memory@80c00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x80c00000 0x0 0x40000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		/* uefi region can be reused by apps */
>>>>>> +
>>>>>> +		tz_stat_mem: memory@81d00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x81d00000 0x0 0x100000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tags_mem: memory@81e00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x81e00000 0x0 0x500000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		qtee_mem: memory@82300000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x82300000 0x0 0x500000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		ta_mem: memory@82800000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x82800000 0x0 0xa00000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		fs1_mem: memory@83200000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x83200000 0x0 0x400000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		fs2_mem: memory@83600000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x83600000 0x0 0x400000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		fs3_mem: memory@83a00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x83a00000 0x0 0x400000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		/* Linux kernel image is loaded at 0x83e00000 */
>>>>>> +
>>>>>> +		ipa_fw_mem: memory@8be00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x8be00000 0x0 0x10000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		ipa_gsi_mem: memory@8be10000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x8be10000 0x0 0x14000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		mpss_mem: memory@8c000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x8c000000 0x0 0x12c00000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		q6_mpss_dtb_mem: memory@9ec00000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0x9ec00000 0x0 0x80000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tenx_mem: memory@a0000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xa0000000 0x0 0x19600000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		oem_tenx_mem: memory@b9600000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xb9600000 0x0 0x6a00000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tenx_q6_buffer_mem: memory@c0000000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xc0000000 0x0 0x3200000>;
>>>>>> +		};
>>>>>> +
>>>>>> +		ipa_buffer_mem: memory@c3200000 {
>>>>>> +			no-map;
>>>>>> +			reg = <0x0 0xc3200000 0x0 0x12c00000>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +
>>>>>> +	soc: soc@0 {
>>>>>> +		#address-cells = <2>;
>>>>>> +		#size-cells = <2>;
>>>>>> +		ranges = <0 0 0 0 0x10 0>;
>>>>>> +		dma-ranges = <0 0 0 0 0x10 0>;
>>>>>> +		compatible = "simple-bus";
>>>>>> +
>>>>>> +		gcc: clock-controller@80000 {
>>>>>> +			compatible = "qcom,gcc-qdu1000", "qcom,gcc-qru1000", "syscon";
>>>>>> +			reg = <0x0 0x80000 0x0 0x1f4200>;
>>>>>> +			#clock-cells = <1>;
>>>>>> +			#reset-cells = <1>;
>>>>>> +			#power-domain-cells = <1>;
>>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>>>>>> +			clock-names = "bi_tcxo", "sleep_clk";
>>>>>> +		};
>>>>>> +
>>>>>> +		gpi_dma0: dma-controller@900000  {
>>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>>> This won't work if you drop series [1]. It won't just fail the schema checks,
>>>>> but it would also fail to probe because the driver doesn't recognise it.
>>>>>
>>>>> I think you were told to rebase on [2], and didn't change your own series
>>>>> because it only applied to ee_offset = 0x0. There is another series [3] that
>>>>> was sent to you, meant for ee_offset = 0x10000. You're expected to change your
>>>>> patches (in both series you sent) based on what was changed in that series.
>>>>>
>>>>> [1] https://lore.kernel.org/linux-arm-msm/a4db0335-33d8-76cd-6f89-b8bde603aedf@quicinc.com/
>>>>> [2] https://lore.kernel.org/linux-arm-msm/20221018005740.23952-1-mailingradian@gmail.com/T/
>>>>> [3] https://lore.kernel.org/linux-arm-msm/20221018230352.1238479-1-krzysztof.kozlowski@linaro.org/T/
>>>> Hi Richard; I was aware of this feedback and was planning to make that change in v3.
>>>> PS [1] will be dropped and this compatible will be modified similar to PS [3]; that was
>>>> what I meant by my final comment on [1].
>>> Ok, I should have checked the date. What about the schema patch? It might be
>>> helpful for the device tree cleanup efforts if you didn't add a compatible
>>> without adding a corresponding entry in the device tree bindings.
>>>
>>> I'm talking about updating this patch in particular:
>>>
>>> https://lore.kernel.org/linux-arm-msm/20221014221102.7445-2-quic_molvera@quicinc.com/
>>>
>>> We still add compat strings in dt-bindings even when there is a fallback,
>>> because the schema is meant to specify every combination of compat strings
>>> found in the device trees.
>> That will be dropped as well. I'll use the sdm845 compat string instead of what's here.
> I hope you're talking about sm6350, because sdm845 has an ee_offset of 0. But if
> you think the maintainers will accept this, then it shouldn't be a problem. I
> just thought that you would copy what the other platforms are doing, which
> required a schema patch.
>
> Example:
>
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml:
>
>     properties:
>       compatible:
>         oneOf:
>           - enum:
>               - qcom,sdm845-gpi-dma
>               - qcom,sm6350-gpi-dma
>           - items:
>               - enum:
>                   - qcom,qdu1000-gpi-dma
>                   - qcom,sc7280-gpi-dma
>                   - qcom,sm8350-gpi-dma
>                   - qcom,sm8450-gpi-dma
>               - const: qcom,sm6350-gpi-dma
>
> and
>
>     compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
>
> would pass schema checks.
>
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml:
>
>     properties:
>       compatible:
>         oneOf:
>           - enum:
>               - qcom,sdm845-gpi-dma
>               - qcom,sm6350-gpi-dma
>           - items:
>               - enum:
>                   - qcom,sc7280-gpi-dma
>                   - qcom,sm8350-gpi-dma
>                   - qcom,sm8450-gpi-dma
>               - const: qcom,sm6350-gpi-dma
>
> and
>
>     compatible = "qcom,sm6350-gpi-dma";
>
> would also pass schema checks.
>
> Documentation/devicetree/bindings/dma/qcom,gpi.yaml:
>
>     properties:
>       compatible:
>         oneOf:
>           - enum:
>               - qcom,sdm845-gpi-dma
>               - qcom,sm6350-gpi-dma
>           - items:
>               - enum:
>                   - qcom,sc7280-gpi-dma
>                   - qcom,sm8350-gpi-dma
>                   - qcom,sm8450-gpi-dma
>               - const: qcom,sm6350-gpi-dma
>
> and
>
>     compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
>
> would not pass schema checks.
Yeah I meant sm6350; my bad. I'll just use that compatible and drop the qdu one.
>
>>>>>> +			#dma-cells = <5>;
>>>>>> +			reg = <0x0 0x900000 0x0 0x60000>;
>>>>>> +			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			dma-channels = <12>;
>>>>>> +			dma-channel-mask = <0x3f>;
>>>>>> +			iommus = <&apps_smmu 0xf6 0x0>;
>>>>>> +			status = "ok";
>>>>>> +		};
>>>>>> +
>>>>>> +		qupv3_id_0: geniqup@9c0000 {
>>>>>> +			compatible = "qcom,geni-se-qup";
>>>>>> +			reg = <0x0 0x9c0000 0x0 0x2000>;
>>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>>>>>> +				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>>>>>> +			iommus = <&apps_smmu 0xe3 0x0>;
>>>>>> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>>>>>> +					 &clk_virt SLAVE_QUP_CORE_0 0>;
>>>>>> +			interconnect-names = "qup-core";
>>>>>> +			qcom,iommu-dma-addr-pool = <0x40000000 0x10000000>;
>>>>>> +			qcom,iommu-geometry = <0x40000000 0x10000000>;
>>>>>> +			qcom,iommu-dma = "fastmap";
>>>>>> +			dma-coherent;
>>>>>> +
>>>>>> +			#address-cells = <2>;
>>>>>> +			#size-cells = <2>;
>>>>>> +			ranges;
>>>>>> +			status = "disabled";
>>>>>> +
>>>>>> +			uart0: serial@980000 {
>>>>>> +				compatible = "qcom,geni-uart";
>>>>>> +				reg = <0x0 0x980000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart0_default>;
>>>>>> +				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c1: i2c@984000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c1_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 1 3 64 0>,
>>>>>> +					<&gpi_dma0 1 1 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi1: spi@984000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x984000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 1 1 64 0>,
>>>>>> +					<&gpi_dma0 1 1 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c2: i2c@988000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c2_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 2 3 64 0>,
>>>>>> +					<&gpi_dma0 1 2 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi2: spi@988000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x988000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 2 1 64 0>,
>>>>>> +					<&gpi_dma0 1 2 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c3: i2c@98c000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c3_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 3 3 64 0>,
>>>>>> +					<&gpi_dma0 1 3 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi3: spi@98c000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x98c000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 3 1 64 0>,
>>>>>> +					<&gpi_dma0 1 3 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c4: i2c@990000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c4_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 4 3 64 0>,
>>>>>> +					<&gpi_dma0 1 4 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi4: spi@990000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x990000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 4 1 64 0>,
>>>>>> +					<&gpi_dma0 1 4 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c5: i2c@994000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c5_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 5 3 64 0>,
>>>>>> +					<&gpi_dma0 1 5 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi5: spi@994000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x994000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 5 1 64 0>,
>>>>>> +					<&gpi_dma0 1 5 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c6: i2c@998000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c6_data_clk>;
>>>>>> +				dmas = <&gpi_dma0 0 6 3 64 0>,
>>>>>> +					<&gpi_dma0 1 6 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi6: spi@998000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0x998000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>,
>>>>>> +				<&system_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>>>>>> +				dmas = <&gpi_dma0 0 6 1 64 0>,
>>>>>> +					<&gpi_dma0 1 6 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			uart7: serial@99c000 {
>>>>>> +				compatible = "qcom,geni-debug-uart";
>>>>>> +				reg = <0x0 0x99c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>>>>>> +				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		gpi_dma1: dma-controller@a00000  {
>>>>>> +			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
>>>>> See above.
>>>>>
>>>>>> +			#dma-cells = <5>;
>>>>>> +			reg = <0x0 0xa00000 0x0 0x60000>;
>>>>>> +			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			dma-channels = <12>;
>>>>>> +			dma-channel-mask = <0x3f>;
>>>>>> +			iommus = <&apps_smmu 0x116 0x0>;
>>>>>> +			status = "ok";
>>>>>> +		};
>>>>>> +
>>>>>> +		qupv3_id_1: geniqup@ac0000 {
>>>>>> +			compatible = "qcom,geni-se-qup";
>>>>>> +			reg = <0x0 0xac0000 0x0 0x2000>;
>>>>>> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>>>>>> +				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>>>>>> +			iommus = <&apps_smmu 0x103 0x0>;
>>>>>> +			#address-cells = <1>;
>>>>>> +			#size-cells = <1>;
>>>>>> +			clock-names = "m-ahb", "s-ahb";
>>>>>> +
>>>>>> +			ranges;
>>>>>> +			status = "disabled";
>>>>>> +
>>>>>> +			uart8: serial@a80000 {
>>>>>> +				compatible = "qcom,geni-uart";
>>>>>> +				reg = <0x0 0xa80000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart8_default>;
>>>>>> +				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c9: i2c@a84000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0  &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c9_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 1 3 64 0>,
>>>>>> +					<&gpi_dma1 1 1 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi9: spi@a84000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa84000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 1 1 64 0>,
>>>>>> +					<&gpi_dma1 1 1 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c10: i2c@a88000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c10_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 2 3 64 0>,
>>>>>> +					<&gpi_dma1 1 2 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi10: spi@a88000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa88000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 2 1 64 0>,
>>>>>> +					<&gpi_dma1 1 2 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c11: i2c@a8c000 {
>>>>>> +				compatible = "qcom,i2c-geni";
>>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c11_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 3 3 64 0>,
>>>>>> +					<&gpi_dma1 1 3 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi11: spi@a8c000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa8c000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 3 1 64 0>,
>>>>>> +					<&gpi_dma1 1 3 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c12: i2c@a90000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c12_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 4 3 64 0>,
>>>>>> +					<&gpi_dma1 1 4 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi12: spi@a90000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa90000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 4 1 64 0>,
>>>>>> +					<&gpi_dma1 1 4 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c13: i2c@a94000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c13_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 5 3 64 0>,
>>>>>> +					<&gpi_dma1 1 5 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			uart13: serial@a94000 {
>>>>>> +				compatible = "qcom,geni-uart";
>>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_uart13_default>;
>>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi13: spi@a94000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa94000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 5 1 64 0>,
>>>>>> +					<&gpi_dma1 1 5 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c14: i2c@a98000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c14_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 6 3 64 0>,
>>>>>> +					<&gpi_dma1 1 6 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi14: spi@a98000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa98000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 6 1 64 0>,
>>>>>> +					<&gpi_dma1 1 6 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			i2c15: i2c@a9c000 {
>>>>>> +				compatible = "qcom,geni-i2c";
>>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_i2c15_data_clk>;
>>>>>> +				dmas = <&gpi_dma1 0 7 3 64 0>,
>>>>>> +					<&gpi_dma1 1 7 3 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			spi15: spi@a9c000 {
>>>>>> +				compatible = "qcom,geni-spi";
>>>>>> +				reg = <0x0 0xa9c000 0x0 0x4000>;
>>>>>> +				#address-cells = <1>;
>>>>>> +				#size-cells = <0>;
>>>>>> +				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				clock-names = "se";
>>>>>> +				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>>>>>> +				interconnect-names = "qup-core", "qup-config", "qup-memory";
>>>>>> +				interconnects =
>>>>>> +				<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
>>>>>> +				<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_1 0>,
>>>>>> +				<&system_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
>>>>>> +				pinctrl-names = "default";
>>>>>> +				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>>>>>> +				dmas = <&gpi_dma1 0 7 1 64 0>,
>>>>>> +					<&gpi_dma1 1 7 1 64 0>;
>>>>>> +				dma-names = "tx", "rx";
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		system_noc: interconnect@1640000 {
>>>>>> +			reg = <0x0 0x1640000 0x0 0x45080>;
>>>>>> +			compatible = "qcom,qdu1000-system-noc", "qcom,qru1000-system-noc";
>>>>>> +			#interconnect-cells = <1>;
>>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tcsr_mutex: hwlock@1f40000 {
>>>>>> +			compatible = "qcom,tcsr-mutex";
>>>>>> +			reg = <0x0 0x1f40000 0x0 0x20000>;
>>>>>> +			#hwlock-cells = <1>;
>>>>>> +		};
>>>>>> +
>>>>>> +		pdc: interrupt-controller@b220000 {
>>>>>> +			compatible = "qcom,pdc";
>>>>>> +			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>>>>>> +			reg-names = "pdc-interrupt-base", "apss-shared-spi-cfg";
>>>>>> +			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>>>>>> +					  <94 609 31>, <125 63 1>;
>>>>>> +			#interrupt-cells = <2>;
>>>>>> +			interrupt-parent = <&intc>;
>>>>>> +			interrupt-controller;
>>>>>> +		};
>>>>>> +
>>>>>> +		spmi_bus: spmi@c400000 {
>>>>>> +			compatible = "qcom,spmi-pmic-arb";
>>>>>> +			reg = <0x0 0xc400000 0x0 0x3000>,
>>>>>> +			      <0x0 0xc500000 0x0 0x400000>,
>>>>>> +			      <0x0 0xc440000 0x0 0x80000>,
>>>>>> +			      <0x0 0xc4c0000 0x0 0x10000>,
>>>>>> +			      <0x0 0xc42d000 0x0 0x4000>;
>>>>>> +			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>>>>>> +			interrupt-names = "periph_irq";
>>>>>> +			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			qcom,ee = <0>;
>>>>>> +			qcom,channel = <0>;
>>>>>> +			#address-cells = <2>;
>>>>>> +			#size-cells = <0>;
>>>>>> +			interrupt-controller;
>>>>>> +			#interrupt-cells = <4>;
>>>>>> +		};
>>>>>> +
>>>>>> +		tlmm: pinctrl@f000000 {
>>>>>> +			compatible = "qcom,qdu1000-tlmm", "qcom,qru1000-tlmm";
>>>>>> +			reg = <0x0 0xf000000 0x0 0x1000000>;
>>>>>> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			gpio-controller;
>>>>>> +			#gpio-cells = <2>;
>>>>>> +			interrupt-controller;
>>>>>> +			#interrupt-cells = <2>;
>>>>>> +			gpio-ranges = <&tlmm 0 0 151>;
>>>>>> +			wakeup-parent = <&pdc>;
>>>>>> +
>>>>>> +			qup_uart0_default: qup-uart0-default-state {
>>>>>> +				pins = "gpio6", "gpio7", "gpio8", "gpio9";
>>>>>> +				function = "qup00";
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c1_data_clk: qup-i2c1-data-clk {
>>>>>> +				pins = "gpio10", "gpio11";
>>>>>> +				function = "qup01";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi1_data_clk: qup-spi1-data-clk {
>>>>>> +				pins = "gpio10", "gpio11", "gpio12";
>>>>>> +				function = "qup01";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi1_cs: qup-spi1-cs {
>>>>>> +				pins = "gpio13";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c2_data_clk: qup-i2c2-data-clk {
>>>>>> +				pins = "gpio12", "gpio13";
>>>>>> +				function = "qup02";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi2_data_clk: qup-spi2-data-clk {
>>>>>> +				pins = "gpio12", "gpio13", "gpio10";
>>>>>> +				function = "qup02";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi2_cs: qup-spi2-cs {
>>>>>> +				pins = "gpio11";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c3_data_clk: qup-i2c3-data-clk {
>>>>>> +				pins = "gpio14", "gpio15";
>>>>>> +				function = "qup03";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi3_data_clk: qup-spi3-data-clk {
>>>>>> +				pins = "gpio14", "gpio15", "gpio16";
>>>>>> +				function = "qup03";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi3_cs: qup-spi3-cs {
>>>>>> +				pins = "gpio17";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c4_data_clk: qup-i2c4-data-clk {
>>>>>> +				pins = "gpio16", "gpio17";
>>>>>> +				function = "qup04";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi4_data_clk: qup-spi4-data-clk {
>>>>>> +				pins = "gpio16", "gpio17", "gpio14";
>>>>>> +				function = "qup04";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi4_cs: qup-spi4-cs {
>>>>>> +				pins = "gpio15";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c5_data_clk: qup-i2c5-data-clk {
>>>>>> +				pins = "gpio130", "gpio131";
>>>>>> +				function = "qup05";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi5_data_clk: qup-spi5-data-clk {
>>>>>> +				pins = "gpio130", "gpio131", "gpio132";
>>>>>> +				function = "qup05";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi5_cs: qup-spi5-cs {
>>>>>> +				pins = "gpio133";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c6_data_clk: qup-i2c6-data-clk {
>>>>>> +				pins = "gpio132", "gpio133";
>>>>>> +				function = "qup06";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi6_data_clk: qup-spi6-data-clk {
>>>>>> +				pins = "gpio132", "gpio133", "gpio130";
>>>>>> +				function = "qup06";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi6_cs: qup-spi6-cs {
>>>>>> +				pins = "gpio131";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart7_rx: qup-uart7-rx {
>>>>>> +				pins = "gpio135";
>>>>>> +				function = "qup07";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart7_tx: qup-uart7-tx  {
>>>>>> +				pins = "gpio134";
>>>>>> +				function = "qup07";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart8_default: qup-uart8-default {
>>>>>> +				pins = "gpio18", "gpio19", "gpio20", "gpio21";
>>>>>> +				function = "qup10";
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c9_data_clk: qup-i2c9-data-clk {
>>>>>> +				pins = "gpio22", "gpio23";
>>>>>> +				function = "qup11";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pull-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi9_data_clk: qup-spi9-data-clk {
>>>>>> +				pins = "gpio22", "gpio23", "gpio24";
>>>>>> +				function = "qup11";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi9_cs: qup-spi9-cs {
>>>>>> +				pins = "gpio25";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c10_data_clk: qup-i2c10-data-clk {
>>>>>> +				pins = "gpio24", "gpio25";
>>>>>> +				function = "qup12";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi10_data_clk: qup-spi10-data-clk {
>>>>>> +				pins = "gpio24", "gpio25", "gpio22";
>>>>>> +				function = "qup12";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi10_cs: qup-spi10-cs {
>>>>>> +				pins = "gpio23";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c11_data_clk: qup-i2c11-data-clk {
>>>>>> +				pins = "gpio26", "gpio27";
>>>>>> +				function = "qup13";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi11_data_clk: qup-spi11-data-clk {
>>>>>> +				pins = "gpio26", "gpio27", "gpio28";
>>>>>> +				function = "qup13";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi11_cs: qup-spi11-cs {
>>>>>> +				pins = "gpio29";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c12_data_clk: qup-i2c12-data-clk {
>>>>>> +				pins = "gpio28", "gpio29";
>>>>>> +				function = "qup14";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi12_data_clk: qup-spi12-data-clk {
>>>>>> +				pins = "gpio28", "gpio29", "gpio26";
>>>>>> +				function = "qup14";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi12_cs: qup-spi12-cs {
>>>>>> +				pins = "gpio27";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c13_data_clk: qup-i2c13-data-clk {
>>>>>> +				pins = "gpio30", "gpio31";
>>>>>> +				function = "qup15";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi13_data_clk: qup-spi13-data-clk {
>>>>>> +				pins = "gpio30", "gpio31", "gpio32";
>>>>>> +				function = "qup15";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi13_cs: qup-spi13-cs {
>>>>>> +				pins = "gpio33";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_uart13_default: qup-uart13-default {
>>>>>> +				pins = "gpio30", "gpio31", "gpio32", "gpio33";
>>>>>> +				function = "qup15";
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c14_data_clk: qup-i2c14-data-clk {
>>>>>> +				pins = "gpio34", "gpio35";
>>>>>> +				function = "qup16";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi14_data_clk: qup-spi14-data-clk {
>>>>>> +				pins = "gpio34", "gpio35", "gpio36";
>>>>>> +				function = "qup16";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi14_cs: qup-spi14-cs {
>>>>>> +				pins = "gpio37", "gpio38";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_i2c15_data_clk: qup-i2c15-data-clk {
>>>>>> +				pins = "gpio40", "gpio41";
>>>>>> +				function = "qup17";
>>>>>> +				drive-strength = <2>;
>>>>>> +				bias-pulll-up;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi15_data_clk: qup-spi15-data-clk {
>>>>>> +				pins = "gpio40", "gpio41", "gpio30";
>>>>>> +				function = "qup17";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +
>>>>>> +			qup_spi15_cs: qup-spi15-cs {
>>>>>> +				pins = "gpio31";
>>>>>> +				drive-strength = <6>;
>>>>>> +				bias-disable;
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		apps_smmu: apps-smmu@15000000 {
>>>>>> +			compatible = "qcom,qdu1000-smmu-500", "qcom,qru1000-smmu-500",
>>>>>> +				"arm,mmu-500";
>>>>>> +			reg = <0x0 0x15000000 0x0 0x100000>;
>>>>>> +			#iommu-cells = <2>;
>>>>>> +			#global-interrupts = <2>;
>>>>>> +			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +		};
>>>>>> +
>>>>>> +		intc: interrupt-controller@17200000 {
>>>>>> +			compatible = "arm,gic-v3";
>>>>>> +			#interrupt-cells = <3>;
>>>>>> +			interrupt-controller;
>>>>>> +			#redistributor-regions = <1>;
>>>>>> +			redistributor-stride = <0x0 0x20000>;
>>>>>> +			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
>>>>>> +			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
>>>>>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
>>>>>> +		};
>>>>>> +
>>>>>> +		timer@17420000 {
>>>>>> +			compatible = "arm,armv7-timer-mem";
>>>>>> +			#address-cells = <2>;
>>>>>> +			#size-cells = <2>;
>>>>>> +			ranges;
>>>>>> +			reg = <0x0 0x17420000 0x0 0x1000>;
>>>>>> +			clock-frequency = <19200000>;
>>>>>> +
>>>>>> +			frame@17421000 {
>>>>>> +				frame-number = <0>;
>>>>>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17421000 0x0 0x1000>,
>>>>>> +				      <0x0 0x17422000 0x0 0x1000>;
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17423000 {
>>>>>> +				frame-number = <1>;
>>>>>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17423000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17425000 {
>>>>>> +				frame-number = <2>;
>>>>>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17425000 0x0 0x1000>,
>>>>>> +				      <0x0 0x17426000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17427000 {
>>>>>> +				frame-number = <3>;
>>>>>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17427000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@17429000 {
>>>>>> +				frame-number = <4>;
>>>>>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x17429000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@1742b000 {
>>>>>> +				frame-number = <5>;
>>>>>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x1742b000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +
>>>>>> +			frame@1742d000 {
>>>>>> +				frame-number = <6>;
>>>>>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +				reg = <0x0 0x1742d000 0x0 0x1000>;
>>>>>> +				status = "disabled";
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		apps_rsc: rsc@17a00000 {
>>>>>> +			label = "apps_rsc";
>>>>>> +			compatible = "qcom,rpmh-rsc";
>>>>>> +			reg = <0x0 0x17a00000 0x0 0x10000>,
>>>>>> +			      <0x0 0x17a10000 0x0 0x10000>,
>>>>>> +			      <0x0 0x17a20000 0x0 0x10000>;
>>>>>> +			reg-names = "drv-0", "drv-1", "drv-2";
>>>>>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			qcom,tcs-offset = <0xd00>;
>>>>>> +			qcom,drv-id = <2>;
>>>>>> +			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
>>>>>> +					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
>>>>>> +
>>>>>> +			apps_bcm_voter: bcm_voter {
>>>>>> +				compatible = "qcom,bcm-voter";
>>>>>> +			};
>>>>>> +
>>>>>> +			rpmhcc: clock-controller {
>>>>>> +				compatible = "qcom,qdu1000-rpmh-clk", "qcom,qru1000-rpmh-clk";
>>>>>> +				#clock-cells = <1>;
>>>>>> +				clock-names = "xo";
>>>>>> +				clocks = <&xo_board>;
>>>>>> +			};
>>>>>> +
>>>>>> +			rpmhpd: power-controller {
>>>>>> +				compatible = "qcom,qdu1000-rpmhpd", "qcom,qru1000-rpmhpd";
>>>>>> +				#power-domain-cells = <1>;
>>>>>> +				operating-points-v2 = <&rpmhpd_opp_table>;
>>>>>> +
>>>>>> +				rpmhpd_opp_table: opp-table {
>>>>>> +					compatible = "operating-points-v2";
>>>>>> +
>>>>>> +					rpmhpd_opp_ret: opp1 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_min_svs: opp2 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_low_svs: opp3 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_svs: opp4 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_svs_l1: opp5 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_nom: opp6 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_nom_l1: opp7 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_nom_l2: opp8 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_turbo: opp9 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>>>>>> +					};
>>>>>> +
>>>>>> +					rpmhpd_opp_turbo_l1: opp10 {
>>>>>> +						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>>>>>> +					};
>>>>>> +				};
>>>>>> +			};
>>>>>> +		};
>>>>>> +
>>>>>> +		cpufreq_hw: cpufreq@17d91000 {
>>>>>> +			compatible = "qcom, qdu1000-cpufreq-epss", "qcom, qru1000-cpufreq-epss",
>>>>>> +				"qcom,cpufreq-epss";
>>>>>> +			reg = <0x0 0x17d91000 0x0 0x1000>;
>>>>>> +			reg-names = "freq-domain0";
>>>>>> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>>>>>> +			clock-names = "xo", "alternate";
>>>>>> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> +			interrupt-names = "dcvsh-irq-0";
>>>>>> +			#freq-domain-cells = <1>;
>>>>>> +		};
>>>>>> +
>>>>>> +		gem_noc: interconnect@19100000 {
>>>>>> +			reg = <0x0 0x19100000 0x0 0xB8080>;
>>>>>> +			compatible = "qcom,qdu1000-gem-noc", "qcom,qru1000-gem-noc";
>>>>>> +			#interconnect-cells = <1>;
>>>>>> +			qcom,bcm-voters = <&apps_bcm_voter>;
>>>>>> +		};
>>>>>> +
>>>>>> +		arch_timer: timer {
>>>>>> +			compatible = "arm,armv8-timer";
>>>>>> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>>>> +				     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>>>> +			clock-frequency = <19200000>;
>>>>>> +		};
>>>>>> +	};
>>>>>> +};
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>> new file mode 100644
>>>>>> index 000000000000..074fe126e85e
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>>>> @@ -0,0 +1,27 @@
>>>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>>>> +/*
>>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#include "qdu1000.dtsi"
>>>>>> +
>>>>>> +&reserved_memory {
>>>>>> +	/delete-node/ memory@a0000000;
>>>>>> +	/delete-node/ memory@b9600000;
>>>>>> +	/delete-node/ memory@c0000000;
>>>>>> +
>>>>>> +	oem_tenx_mem: memory@a0000000 {
>>>>>> +		no-map;
>>>>>> +		reg = <0x0 0xa0000000 0x0 0x6400000>;
>>>>>> +	};
>>>>>> +
>>>>>> +	mpss_diag_buffer_mem: memory@aea00000 {
>>>>>> +		no-map;
>>>>>> +		reg = <0x0 0xaea00000 0x0 0x6400000>;
>>>>>> +	};
>>>>>> +
>>>>>> +	tenx_q6_buffer_mem: memory@b4e00000 {
>>>>>> +		no-map;
>>>>>> +		reg = <0x0 0xb4e00000 0x0 0x3200000>;
>>>>>> +	};
>>>>>> +};
>>>>>> -- 
>>>>>> 2.38.0
>>>> Thanks,
>>>> Melody

[PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[Melody Olvera]

Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile        |   2 +
 arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++
 3 files changed, 462 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7669a7cee9f..8417295adfeb 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
new file mode 100644
index 000000000000..47a8eaf4fda2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qdu1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
+	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	pm8150-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
new file mode 100644
index 000000000000..54770c697db8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qru1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
+	compatible = "qcom,qru1000-idp", "qcom,qru1000";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	pm8150-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
-- 
2.38.0

Re: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[Krzysztof Kozlowski]

On 14/10/2022 18:11, Melody Olvera wrote:
> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
> SoCs.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile        |   2 +
>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++
>  3 files changed, 462 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d7669a7cee9f..8417295adfeb 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> new file mode 100644
> index 000000000000..47a8eaf4fda2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qdu1000.dtsi"
> +#include "pm8150.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
> +	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
> +
> +	aliases {
> +		serial0 = &uart7;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	ppvar_sys: ppvar-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "ppvar_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +
> +		regulator-always-on;
> +		regulator-boot-on;
> +
> +		vin-supply = <&ppvar_sys>;
> +	};
> +};
> +
> +&apps_rsc {
> +	pm8150-regulators {

regulators

> +		compatible = "qcom,pm8150-rpmh-regulators";
> +		qcom,pmic-id = "a";
> +
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s7-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +		vdd-s9-supply = <&vph_pwr>;
> +		vdd-s10-supply = <&vph_pwr>;
> +
> +		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
> +		vdd-l2-l10-supply = <&vph_pwr>;
> +		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
> +		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
> +		vdd-l13-l16-l17-supply = <&vph_pwr>;
> +
> +		vreg_s2a_0p5: smps2 {
> +			regulator-name = "vreg_s2a_0p5";
> +			regulator-min-microvolt = <320000>;
> +			regulator-max-microvolt = <570000>;
> +		};
> +
> +		vreg_s3a_1p05: smps3 {
> +			regulator-name = "vreg_s3a_1p05";
> +			regulator-min-microvolt = <950000>;
> +			regulator-max-microvolt = <1170000>;
> +		};
> +
> +		vreg_s4a_1p8: smps4 {
> +			regulator-name = "vreg_s4a_1p8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		vreg_s5a_2p0: smps5 {
> +			regulator-name = "vreg_s5a_2p0";
> +			regulator-min-microvolt = <1904000>;
> +			regulator-max-microvolt = <2000000>;
> +		};
> +
> +		vreg_s6a_0p9: smps6 {
> +			regulator-name = "vreg_s6a_0p9";
> +			regulator-min-microvolt = <920000>;
> +			regulator-max-microvolt = <1128000>;
> +		};
> +
> +		vreg_s7a_1p2: smps7 {
> +			regulator-name = "vreg_s7a_1p2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +		};
> +
> +		vreg_s8a_1p3: smps8 {
> +			regulator-name = "vreg_s8a_1p3";
> +			regulator-min-microvolt = <1352000>;
> +			regulator-max-microvolt = <1352000>;
> +		};
> +
> +		vreg_l1a_0p91: ldo1 {
> +			regulator-name = "vreg_l1a_0p91";
> +			regulator-min-microvolt = <312000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l2a_2p3: ldo2 {
> +			regulator-name = "vreg_l2a_2p3";
> +			regulator-min-microvolt = <2970000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l3a_1p2: ldo3 {
> +			regulator-name = "vreg_l3a_1p2";
> +			regulator-min-microvolt = <920000>;
> +			regulator-max-microvolt = <1260000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l5a_0p8: ldo5 {
> +			regulator-name = "vreg_l5a_0p8";
> +			regulator-min-microvolt = <312000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l6a_0p91: ldo6 {
> +			regulator-name = "vreg_l6a_0p91";
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <950000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l7a_1p8: ldo7 {
> +			regulator-name = "vreg_l7a_1p8";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +
> +		};
> +
> +		vreg_l8a_0p91: ldo8 {
> +			regulator-name = "vreg_l8a_0p91";
> +			regulator-min-microvolt = <888000>;
> +			regulator-max-microvolt = <925000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l9a_0p91: ldo9 {
> +			regulator-name = "vreg_l8a_0p91";
> +			regulator-min-microvolt = <312000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l10a_2p95: ldo10 {
> +			regulator-name = "vreg_l10a_2p95";
> +			regulator-min-microvolt = <2700000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l11a_0p91: ldo11 {
> +			regulator-name = "vreg_l11a_0p91";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l12a_1p8: ldo12 {
> +			regulator-name = "vreg_l12a_1p8";
> +			regulator-min-microvolt = <1504000>;
> +			regulator-max-microvolt = <1504000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l14a_1p8: ldo14 {
> +			regulator-name = "vreg_l14a_1p8";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <1950000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l15a_1p8: ldo15 {
> +			regulator-name = "vreg_l15a_1p8";
> +			regulator-min-microvolt = <1504000>;
> +			regulator-max-microvolt = <2000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l16a_1p8: ldo16 {
> +			regulator-name = "vreg_l16a_1p8";
> +			regulator-min-microvolt = <1710000>;
> +			regulator-max-microvolt = <1890000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l17a_3p3: ldo17 {
> +			regulator-name = "vreg_l17a_3p3";
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3544000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +
> +		vreg_l18a_1p2: ldo18 {
> +			regulator-name = "vreg_l18a_1p2";
> +			regulator-min-microvolt = <312000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +		};
> +	};
> +};
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&uart7 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
> new file mode 100644
> index 000000000000..54770c697db8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qru1000.dtsi"
> +#include "pm8150.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
> +	compatible = "qcom,qru1000-idp", "qcom,qru1000";
> +
> +	aliases {
> +		serial0 = &uart7;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	ppvar_sys: ppvar-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "ppvar_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +
> +		regulator-always-on;
> +		regulator-boot-on;
> +
> +		vin-supply = <&ppvar_sys>;
> +	};
> +};
> +
> +&apps_rsc {
> +	pm8150-regulators {

regulators


Best regards,
Krzysztof

Re: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[Melody Olvera]

On 10/15/2022 6:29 AM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:11, Melody Olvera wrote:
>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
>> SoCs.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile        |   2 +
>>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++
>>  3 files changed, 462 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index d7669a7cee9f..8417295adfeb 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> new file mode 100644
>> index 000000000000..47a8eaf4fda2
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> @@ -0,0 +1,230 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "qdu1000.dtsi"
>> +#include "pm8150.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
>> +	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
>> +
>> +	aliases {
>> +		serial0 = &uart7;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	ppvar_sys: ppvar-sys-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "ppvar_sys";
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	vph_pwr: vph-pwr-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-min-microvolt = <3700000>;
>> +		regulator-max-microvolt = <3700000>;
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +
>> +		vin-supply = <&ppvar_sys>;
>> +	};
>> +};
>> +
>> +&apps_rsc {
>> +	pm8150-regulators {
> regulators
Just 'regulators' as the node name isn't compliant with the bindings for rpmh-rsc devices.
Do the bindings need to be updated or should I leave this as is?
>
>> +		compatible = "qcom,pm8150-rpmh-regulators";
>> +		qcom,pmic-id = "a";
>> +
>> +		vdd-s1-supply = <&vph_pwr>;
>> +		vdd-s2-supply = <&vph_pwr>;
>> +		vdd-s3-supply = <&vph_pwr>;
>> +		vdd-s4-supply = <&vph_pwr>;
>> +		vdd-s5-supply = <&vph_pwr>;
>> +		vdd-s6-supply = <&vph_pwr>;
>> +		vdd-s7-supply = <&vph_pwr>;
>> +		vdd-s8-supply = <&vph_pwr>;
>> +		vdd-s9-supply = <&vph_pwr>;
>> +		vdd-s10-supply = <&vph_pwr>;
>> +
>> +		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
>> +		vdd-l2-l10-supply = <&vph_pwr>;
>> +		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
>> +		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
>> +		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
>> +		vdd-l13-l16-l17-supply = <&vph_pwr>;
>> +
>> +		vreg_s2a_0p5: smps2 {
>> +			regulator-name = "vreg_s2a_0p5";
>> +			regulator-min-microvolt = <320000>;
>> +			regulator-max-microvolt = <570000>;
>> +		};
>> +
>> +		vreg_s3a_1p05: smps3 {
>> +			regulator-name = "vreg_s3a_1p05";
>> +			regulator-min-microvolt = <950000>;
>> +			regulator-max-microvolt = <1170000>;
>> +		};
>> +
>> +		vreg_s4a_1p8: smps4 {
>> +			regulator-name = "vreg_s4a_1p8";
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <1800000>;
>> +		};
>> +
>> +		vreg_s5a_2p0: smps5 {
>> +			regulator-name = "vreg_s5a_2p0";
>> +			regulator-min-microvolt = <1904000>;
>> +			regulator-max-microvolt = <2000000>;
>> +		};
>> +
>> +		vreg_s6a_0p9: smps6 {
>> +			regulator-name = "vreg_s6a_0p9";
>> +			regulator-min-microvolt = <920000>;
>> +			regulator-max-microvolt = <1128000>;
>> +		};
>> +
>> +		vreg_s7a_1p2: smps7 {
>> +			regulator-name = "vreg_s7a_1p2";
>> +			regulator-min-microvolt = <1200000>;
>> +			regulator-max-microvolt = <1200000>;
>> +		};
>> +
>> +		vreg_s8a_1p3: smps8 {
>> +			regulator-name = "vreg_s8a_1p3";
>> +			regulator-min-microvolt = <1352000>;
>> +			regulator-max-microvolt = <1352000>;
>> +		};
>> +
>> +		vreg_l1a_0p91: ldo1 {
>> +			regulator-name = "vreg_l1a_0p91";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l2a_2p3: ldo2 {
>> +			regulator-name = "vreg_l2a_2p3";
>> +			regulator-min-microvolt = <2970000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l3a_1p2: ldo3 {
>> +			regulator-name = "vreg_l3a_1p2";
>> +			regulator-min-microvolt = <920000>;
>> +			regulator-max-microvolt = <1260000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l5a_0p8: ldo5 {
>> +			regulator-name = "vreg_l5a_0p8";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l6a_0p91: ldo6 {
>> +			regulator-name = "vreg_l6a_0p91";
>> +			regulator-min-microvolt = <880000>;
>> +			regulator-max-microvolt = <950000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l7a_1p8: ldo7 {
>> +			regulator-name = "vreg_l7a_1p8";
>> +			regulator-min-microvolt = <1650000>;
>> +			regulator-max-microvolt = <2000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +
>> +		};
>> +
>> +		vreg_l8a_0p91: ldo8 {
>> +			regulator-name = "vreg_l8a_0p91";
>> +			regulator-min-microvolt = <888000>;
>> +			regulator-max-microvolt = <925000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l9a_0p91: ldo9 {
>> +			regulator-name = "vreg_l8a_0p91";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l10a_2p95: ldo10 {
>> +			regulator-name = "vreg_l10a_2p95";
>> +			regulator-min-microvolt = <2700000>;
>> +			regulator-max-microvolt = <3544000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l11a_0p91: ldo11 {
>> +			regulator-name = "vreg_l11a_0p91";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l12a_1p8: ldo12 {
>> +			regulator-name = "vreg_l12a_1p8";
>> +			regulator-min-microvolt = <1504000>;
>> +			regulator-max-microvolt = <1504000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l14a_1p8: ldo14 {
>> +			regulator-name = "vreg_l14a_1p8";
>> +			regulator-min-microvolt = <1650000>;
>> +			regulator-max-microvolt = <1950000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l15a_1p8: ldo15 {
>> +			regulator-name = "vreg_l15a_1p8";
>> +			regulator-min-microvolt = <1504000>;
>> +			regulator-max-microvolt = <2000000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l16a_1p8: ldo16 {
>> +			regulator-name = "vreg_l16a_1p8";
>> +			regulator-min-microvolt = <1710000>;
>> +			regulator-max-microvolt = <1890000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l17a_3p3: ldo17 {
>> +			regulator-name = "vreg_l17a_3p3";
>> +			regulator-min-microvolt = <3000000>;
>> +			regulator-max-microvolt = <3544000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +
>> +		vreg_l18a_1p2: ldo18 {
>> +			regulator-name = "vreg_l18a_1p2";
>> +			regulator-min-microvolt = <312000>;
>> +			regulator-max-microvolt = <1304000>;
>> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> +		};
>> +	};
>> +};
>> +
>> +&qupv3_id_0 {
>> +	status = "okay";
>> +};
>> +
>> +&uart7 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> new file mode 100644
>> index 000000000000..54770c697db8
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> @@ -0,0 +1,230 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "qru1000.dtsi"
>> +#include "pm8150.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
>> +	compatible = "qcom,qru1000-idp", "qcom,qru1000";
>> +
>> +	aliases {
>> +		serial0 = &uart7;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	ppvar_sys: ppvar-sys-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "ppvar_sys";
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>> +	vph_pwr: vph-pwr-regulator {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-min-microvolt = <3700000>;
>> +		regulator-max-microvolt = <3700000>;
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +
>> +		vin-supply = <&ppvar_sys>;
>> +	};
>> +};
>> +
>> +&apps_rsc {
>> +	pm8150-regulators {
> regulators
Same as above.
>
>
> Best regards,
> Krzysztof
>
Thanks,
Melody

Re: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[Krzysztof Kozlowski]

On 19/10/2022 17:16, Melody Olvera wrote:
> 
> 
> On 10/15/2022 6:29 AM, Krzysztof Kozlowski wrote:
>> On 14/10/2022 18:11, Melody Olvera wrote:
>>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
>>> SoCs.
>>>
>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/Makefile        |   2 +
>>>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++
>>>  arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++
>>>  3 files changed, 462 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index d7669a7cee9f..8417295adfeb 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>>>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> new file mode 100644
>>> index 000000000000..47a8eaf4fda2
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> @@ -0,0 +1,230 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>> +#include "qdu1000.dtsi"
>>> +#include "pm8150.dtsi"
>>> +
>>> +/ {
>>> +	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
>>> +	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
>>> +
>>> +	aliases {
>>> +		serial0 = &uart7;
>>> +	};
>>> +
>>> +	chosen {
>>> +		stdout-path = "serial0:115200n8";
>>> +	};
>>> +
>>> +	ppvar_sys: ppvar-sys-regulator {
>>> +		compatible = "regulator-fixed";
>>> +		regulator-name = "ppvar_sys";
>>> +		regulator-always-on;
>>> +		regulator-boot-on;
>>> +	};
>>> +
>>> +	vph_pwr: vph-pwr-regulator {
>>> +		compatible = "regulator-fixed";
>>> +		regulator-name = "vph_pwr";
>>> +		regulator-min-microvolt = <3700000>;
>>> +		regulator-max-microvolt = <3700000>;
>>> +
>>> +		regulator-always-on;
>>> +		regulator-boot-on;
>>> +
>>> +		vin-supply = <&ppvar_sys>;
>>> +	};
>>> +};
>>> +
>>> +&apps_rsc {
>>> +	pm8150-regulators {
>> regulators
> Just 'regulators' as the node name isn't compliant with the bindings for rpmh-rsc devices.
> Do the bindings need to be updated or should I leave this as is?

If bindings expect this, I propose to change them. Which schema is
expecting this? I already fixed SMD RPM:
https://lore.kernel.org/all/20220926092104.111449-1-krzysztof.kozlowski@linaro.org/

Best regards,
Krzysztof

Re: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2764 bytes --]

Hi Melody,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.1-rc1 next-20221018]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Melody-Olvera/dt-bindings-arm-qcom-Document-QDU1000-QRU1000-SoCs-and-boards/20221017-130730
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20221014221138.7552-4-quic_molvera%40quicinc.com
patch subject: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
config: arm64-allyesconfig
compiler: aarch64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/713803878765e4e2e8e7801441d9b3094a89316f
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Melody-Olvera/dt-bindings-arm-qcom-Document-QDU1000-QRU1000-SoCs-and-boards/20221017-130730
        git checkout 713803878765e4e2e8e7801441d9b3094a89316f
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from arch/arm64/boot/dts/qcom/qdu1000-idp.dts:9:
>> arch/arm64/boot/dts/qcom/qdu1000.dtsi:7:10: fatal error: dt-bindings/clock/qcom,gcc-qdu1000.h: No such file or directory
       7 | #include <dt-bindings/clock/qcom,gcc-qdu1000.h>
         |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   compilation terminated.


vim +7 arch/arm64/boot/dts/qcom/qdu1000.dtsi

ea267b70bd037f9 Melody Olvera 2022-10-14  @7  #include <dt-bindings/clock/qcom,gcc-qdu1000.h>
ea267b70bd037f9 Melody Olvera 2022-10-14   8  #include <dt-bindings/clock/qcom,rpmh.h>
ea267b70bd037f9 Melody Olvera 2022-10-14   9  #include <dt-bindings/dma/qcom-gpi.h>
ea267b70bd037f9 Melody Olvera 2022-10-14  10  #include <dt-bindings/interconnect/qcom,qdu1000.h>
ea267b70bd037f9 Melody Olvera 2022-10-14  11  #include <dt-bindings/power/qcom-rpmpd.h>
ea267b70bd037f9 Melody Olvera 2022-10-14  12  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
ea267b70bd037f9 Melody Olvera 2022-10-14  13  

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 362373 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="aarch64-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_GENERIC_IRQ_IPI=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_TIME_KUNIT_TEST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_USERMODE_DRIVER=y
CONFIG_BPF_LSM=y
# end of BPF subsystem

CONFIG_PREEMPT_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_SCHED_THERMAL_PRESSURE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_EXP_KTHREAD=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
CONFIG_RCU_NOCB_CPU_CB_BOOST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_PRINTK_INDEX=y
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_CGROUP_FAVOR_DYNMODS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_BOOT_CONFIG_EMBED=y
CONFIG_BOOT_CONFIG_EMBED_FILE=""
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_DEBUG_RSEQ=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_ARM64=y
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=12
CONFIG_ARM64_CONT_PTE_SHIFT=4
CONFIG_ARM64_CONT_PMD_SHIFT=4
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_KASAN_SHADOW_OFFSET=0xdfffffc000000000

#
# Platform selection
#
CONFIG_ARCH_ACTIONS=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_APPLE=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BCMBCA=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BITMAIN=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_SPARX5=y
CONFIG_ARCH_K3=y
CONFIG_ARCH_LG1K=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_KEEMBAY=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NXP=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_MXC=y
CONFIG_ARCH_S32=y
CONFIG_ARCH_NPCM=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_REALTEK=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_INTEL_SOCFPGA=y
CONFIG_ARCH_SYNQUACER=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TESLA_FSD=y
CONFIG_ARCH_SPRD=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VISCONTI=y
CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZYNQMP=y
# end of Platform selection

#
# Kernel Features
#

#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_834220=y
CONFIG_ARM64_ERRATUM_1742098=y
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
CONFIG_ARM64_ERRATUM_1165522=y
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_ARM64_ERRATUM_2441007=y
CONFIG_ARM64_ERRATUM_1286807=y
CONFIG_ARM64_ERRATUM_1463225=y
CONFIG_ARM64_ERRATUM_1542419=y
CONFIG_ARM64_ERRATUM_1508412=y
CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE=y
CONFIG_ARM64_ERRATUM_2051678=y
CONFIG_ARM64_ERRATUM_2077057=y
CONFIG_ARM64_ERRATUM_2658417=y
CONFIG_ARM64_ERRATUM_2119858=y
CONFIG_ARM64_ERRATUM_2139208=y
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
CONFIG_ARM64_ERRATUM_2054223=y
CONFIG_ARM64_ERRATUM_2067961=y
CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE=y
CONFIG_ARM64_ERRATUM_2253138=y
CONFIG_ARM64_ERRATUM_2224489=y
CONFIG_ARM64_ERRATUM_2441009=y
CONFIG_ARM64_ERRATUM_2064142=y
CONFIG_ARM64_ERRATUM_2038923=y
CONFIG_ARM64_ERRATUM_1902691=y
CONFIG_ARM64_ERRATUM_2457168=y
CONFIG_CAVIUM_ERRATUM_22375=y
CONFIG_CAVIUM_ERRATUM_23144=y
CONFIG_CAVIUM_ERRATUM_23154=y
CONFIG_CAVIUM_ERRATUM_27456=y
CONFIG_CAVIUM_ERRATUM_30115=y
CONFIG_CAVIUM_TX2_ERRATUM_219=y
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_HISILICON_ERRATUM_161600802=y
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
# end of ARM errata workarounds via the alternatives framework

CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_16K_PAGES is not set
# CONFIG_ARM64_64K_PAGES is not set
CONFIG_ARM64_VA_BITS_39=y
# CONFIG_ARM64_VA_BITS_48 is not set
CONFIG_ARM64_VA_BITS=39
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_NR_CPUS=256
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
CONFIG_KEXEC_IMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_TRANS_TABLE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN=y
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
CONFIG_ARM64_SW_TTBR0_PAN=y
CONFIG_ARM64_TAGGED_ADDR_ABI=y
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
CONFIG_COMPAT_ALIGNMENT_FIXUPS=y
CONFIG_ARMV8_DEPRECATED=y
CONFIG_SWP_EMULATION=y
CONFIG_CP15_BARRIER_EMULATION=y
CONFIG_SETEND_EMULATION=y

#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
CONFIG_AS_HAS_LDAPR=y
CONFIG_AS_HAS_LSE_ATOMICS=y
CONFIG_ARM64_LSE_ATOMICS=y
CONFIG_ARM64_USE_LSE_ATOMICS=y
# end of ARMv8.1 architectural features

#
# ARMv8.2 architectural features
#
CONFIG_AS_HAS_ARMV8_2=y
CONFIG_AS_HAS_SHA3=y
CONFIG_ARM64_PMEM=y
CONFIG_ARM64_RAS_EXTN=y
CONFIG_ARM64_CNP=y
# end of ARMv8.2 architectural features

#
# ARMv8.3 architectural features
#
CONFIG_ARM64_PTR_AUTH=y
CONFIG_ARM64_PTR_AUTH_KERNEL=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET=y
CONFIG_CC_HAS_SIGN_RETURN_ADDRESS=y
CONFIG_AS_HAS_PAC=y
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
# end of ARMv8.3 architectural features

#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
CONFIG_AS_HAS_ARMV8_4=y
CONFIG_ARM64_TLB_RANGE=y
# end of ARMv8.4 architectural features

#
# ARMv8.5 architectural features
#
CONFIG_AS_HAS_ARMV8_5=y
CONFIG_ARM64_BTI=y
CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
CONFIG_ARM64_E0PD=y
CONFIG_ARM64_AS_HAS_MTE=y
CONFIG_ARM64_MTE=y
# end of ARMv8.5 architectural features

#
# ARMv8.7 architectural features
#
CONFIG_ARM64_EPAN=y
# end of ARMv8.7 architectural features

CONFIG_ARM64_SVE=y
CONFIG_ARM64_SME=y
CONFIG_ARM64_MODULE_PLTS=y
CONFIG_ARM64_PSEUDO_NMI=y
CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
CONFIG_STACKPROTECTOR_PER_TASK=y
CONFIG_ARCH_NR_GPIO=2048
# end of Kernel Features

#
# Boot options
#
CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_DMI=y
# end of Boot options

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_USERSPACE_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options

#
# CPU Power Management
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_DT_IDLE_STATES=y
CONFIG_DT_IDLE_GENPD=y

#
# ARM CPU Idle Drivers
#
CONFIG_ARM_PSCI_CPUIDLE=y
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
CONFIG_ARM_CLPS711X_CPUIDLE=y
# end of ARM CPU Idle Drivers
# end of CPU Idle

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ACPI_CPPC_CPUFREQ=y
CONFIG_ACPI_CPPC_CPUFREQ_FIE=y
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_ARMADA_8K_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
CONFIG_ARM_BRCMSTB_AVS_CPUFREQ=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_ARM_IMX_CPUFREQ_DT=y
CONFIG_ARM_MEDIATEK_CPUFREQ=y
CONFIG_ARM_MEDIATEK_CPUFREQ_HW=y
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
CONFIG_ARM_QCOM_CPUFREQ_HW=y
CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
CONFIG_ARM_SCMI_CPUFREQ=y
CONFIG_ARM_TEGRA20_CPUFREQ=y
CONFIG_ARM_TEGRA124_CPUFREQ=y
CONFIG_ARM_TEGRA186_CPUFREQ=y
CONFIG_ARM_TEGRA194_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
# end of CPU Frequency scaling
# end of CPU Power Management

CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_GENERIC_GSI=y
CONFIG_ACPI_CCA_REQUIRED=y
CONFIG_ACPI_TABLE_LIB=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_MCFG=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_ACPI_NFIT=y
CONFIG_NFIT_SECURITY_DEBUG=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_SEA=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_CONFIGFS=y
CONFIG_ACPI_PFRUT=y
CONFIG_ACPI_IORT=y
CONFIG_ACPI_GTDT=y
CONFIG_ACPI_AGDI=y
CONFIG_ACPI_PPTT=y
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_BYTCRC_PMIC_OPREGION=y
CONFIG_CHTCRC_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_ACPI_PRMT=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_NVHE_EL2_DEBUG=y
CONFIG_PROTECTED_NVHE_STACKTRACE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_IMA_KEXEC=y
CONFIG_ARCH_HAS_SUBPAGE_FAULTS=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_SHADOW_CALL_STACK=y
# CONFIG_SHADOW_CALL_STACK is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_COMPILER_H=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_RELR=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_KEY=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAVE_TRACE_MMIO_ACCESS=y

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_BFQ_CGROUP_DEBUG=y
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_KUNIT_TEST=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLUB_STATS=y
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_THP_SWAP=y
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=19
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_ANON_VMA_NAME=y
CONFIG_USERFAULTFD=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
CONFIG_LRU_GEN_STATS=y

#
# Data Access Monitoring
#
CONFIG_DAMON=y
CONFIG_DAMON_KUNIT_TEST=y
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_VADDR_KUNIT_TEST=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_DBGFS=y
CONFIG_DAMON_DBGFS_KUNIT_TEST=y
CONFIG_DAMON_RECLAIM=y
CONFIG_DAMON_LRU_SORT=y
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=y
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
CONFIG_TLS_TOE=y
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_INTERFACE=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XFRM_ESPINTCP=y
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
CONFIG_TCP_CONG_DCTCP=y
CONFIG_TCP_CONG_CDG=y
CONFIG_TCP_CONG_BBR=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_DCTCP is not set
# CONFIG_DEFAULT_CDG is not set
# CONFIG_DEFAULT_BBR is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_ESP_OFFLOAD=y
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TEST=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_HOOK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_SYSLOG=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=y
CONFIG_NFT_CT=y
CONFIG_NFT_FLOW_OFFLOAD=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_NAT=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NFT_FIB_INET=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
CONFIG_NFT_DUP_NETDEV=y
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NFT_FIB_NETDEV=y
CONFIG_NFT_REJECT_NETDEV=y
CONFIG_NF_FLOW_TABLE_INET=y
CONFIG_NF_FLOW_TABLE=y
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration

CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_FO=y
CONFIG_IP_VS_OVF=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_MH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
CONFIG_IP_VS_TWOS=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_CONNTRACK_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_BPFILTER=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_AR9331=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_HELLCREEK=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA_COMMON=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NET_DSA_TAG_OCELOT=y
CONFIG_NET_DSA_TAG_OCELOT_8021Q=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_RTL4_A=y
CONFIG_NET_DSA_TAG_RTL8_4=y
CONFIG_NET_DSA_TAG_RZN1_A5PSW=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_XRS700X=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
CONFIG_6LOWPAN_NHC_FRAGMENT=y
CONFIG_6LOWPAN_NHC_HOP=y
CONFIG_6LOWPAN_NHC_IPV6=y
CONFIG_6LOWPAN_NHC_MOBILITY=y
CONFIG_6LOWPAN_NHC_ROUTING=y
CONFIG_6LOWPAN_NHC_UDP=y
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=y
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=y
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
# CONFIG_DEFAULT_FQ_CODEL is not set
# CONFIG_DEFAULT_FQ_PIE is not set
# CONFIG_DEFAULT_SFQ is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_EMATCH_IPT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_SAMPLE=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_ACT_MPLS=y
CONFIG_NET_ACT_VLAN=y
CONFIG_NET_ACT_BPF=y
CONFIG_NET_ACT_CONNMARK=y
CONFIG_NET_ACT_CTINFO=y
CONFIG_NET_ACT_SKBMOD=y
CONFIG_NET_ACT_IFE=y
CONFIG_NET_ACT_TUNNEL_KEY=y
CONFIG_NET_ACT_CT=y
CONFIG_NET_ACT_GATE=y
CONFIG_NET_IFE_SKBMARK=y
CONFIG_NET_IFE_SKBPRIO=y
CONFIG_NET_IFE_SKBTCINDEX=y
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_BATMAN_ADV_TRACING=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_OPENVSWITCH_GENEVE=y
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VMWARE_VMCI_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_HYPERV_VSOCKETS=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
CONFIG_MPLS_IPTUNNEL=y
CONFIG_NET_NSH=y
CONFIG_HSR=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=y
CONFIG_QRTR_SMD=y
CONFIG_QRTR_TUN=y
CONFIG_QRTR_MHI=y
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_NCSI_OEM_CMD_KEEP_PHY=y
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# end of AX.25 network device drivers

CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
CONFIG_CAN_ISOTP=y
CONFIG_BT=y
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
CONFIG_BT_SELFTEST=y
CONFIG_BT_SELFTEST_ECDH=y
CONFIG_BT_SELFTEST_SMP=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_QCA=y
CONFIG_BT_MTK=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
CONFIG_BT_QCOMSMD=y
CONFIG_BT_HCIRSI=y
CONFIG_BT_VIRTIO=y
# end of Bluetooth device drivers

CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_TEST=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_XEN=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_VIRTUAL_NCI=y
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_MRVL_SPI=y
CONFIG_NFC_ST21NFCA=y
CONFIG_NFC_ST21NFCA_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_ST_NCI_SPI=y
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_S3FWRN82_UART=y
CONFIG_NFC_ST95HF=y
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=y

#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_TEGRA_AHB=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCIE_EDR=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_P2PDMA=y
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_XILINX_NWL=y
CONFIG_PCI_FTPCI100=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR_HOST=y
CONFIG_PCIE_RCAR_EP=y
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
CONFIG_PCIE_XILINX_CPM=y
CONFIG_PCI_XGENE=y
CONFIG_PCI_XGENE_MSI=y
CONFIG_PCI_V3_SEMI=y
CONFIG_PCI_VERSATILE=y
CONFIG_PCIE_IPROC=y
CONFIG_PCIE_IPROC_PLATFORM=y
CONFIG_PCIE_IPROC_MSI=y
CONFIG_PCIE_ALTERA=y
CONFIG_PCIE_ALTERA_MSI=y
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=y
CONFIG_PCIE_ROCKCHIP_EP=y
CONFIG_PCIE_MEDIATEK=y
CONFIG_PCIE_MEDIATEK_GEN3=y
CONFIG_PCIE_BRCMSTB=y
CONFIG_PCI_HYPERV_INTERFACE=y
CONFIG_PCI_LOONGSON=y
CONFIG_PCIE_MICROCHIP_HOST=y
CONFIG_PCIE_HISI_ERR=y
CONFIG_PCIE_APPLE_MSI_DOORBELL_ADDR=0xfffff000
CONFIG_PCIE_APPLE=y
CONFIG_PCIE_MT7621=y

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCI_DRA7XX=y
CONFIG_PCI_DRA7XX_HOST=y
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCIE_DW_PLAT_EP=y
CONFIG_PCI_EXYNOS=y
CONFIG_PCI_IMX6=y
CONFIG_PCIE_SPEAR13XX=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_KEYSTONE_HOST=y
CONFIG_PCI_KEYSTONE_EP=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_LAYERSCAPE_EP=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_QCOM_EP=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_ARTPEC6=y
CONFIG_PCIE_ARTPEC6_HOST=y
CONFIG_PCIE_ARTPEC6_EP=y
CONFIG_PCIE_ROCKCHIP_DW_HOST=y
CONFIG_PCIE_INTEL_GW=y
CONFIG_PCIE_KEEMBAY=y
CONFIG_PCIE_KEEMBAY_HOST=y
CONFIG_PCIE_KEEMBAY_EP=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCI_MESON=y
CONFIG_PCIE_TEGRA194=y
CONFIG_PCIE_TEGRA194_HOST=y
CONFIG_PCIE_TEGRA194_EP=y
CONFIG_PCIE_VISCONTI_HOST=y
CONFIG_PCIE_UNIPHIER=y
CONFIG_PCIE_UNIPHIER_EP=y
CONFIG_PCIE_AL=y
CONFIG_PCIE_FU740=y
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
CONFIG_PCIE_MOBIVEIL=y
CONFIG_PCIE_MOBIVEIL_HOST=y
CONFIG_PCIE_MOBIVEIL_PLAT=y
CONFIG_PCIE_LAYERSCAPE_GEN4=y
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
CONFIG_PCI_EPF_NTB=y
CONFIG_PCI_EPF_VNTB=y
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers

CONFIG_CXL_BUS=y
CONFIG_CXL_PCI=y
CONFIG_CXL_MEM_RAW_COMMANDS=y
CONFIG_CXL_ACPI=y
CONFIG_CXL_PMEM=y
CONFIG_CXL_MEM=y
CONFIG_CXL_PORT=y
CONFIG_CXL_SUSPEND=y
CONFIG_CXL_REGION=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_RXS_GEN3=y
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_CACHE=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_HMEM_REPORTING=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_DRIVER_PE_KUNIT_TEST=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_AC97=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_SOUNDWIRE_MBQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_REGMAP_SPI_AVMM=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
CONFIG_GENERIC_ARCH_NUMA=y
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
CONFIG_ARM_INTEGRATOR_LM=y
CONFIG_BRCMSTB_GISB_ARB=y
CONFIG_BT1_APB=y
CONFIG_BT1_AXI=y
CONFIG_MOXTET=y
CONFIG_HISILICON_LPC=y
CONFIG_IMX_WEIM=y
CONFIG_INTEL_IXP4XX_EB=y
CONFIG_QCOM_EBI2=y
CONFIG_QCOM_SSC_BLOCK_BUS=y
CONFIG_SUN50I_DE2_BUS=y
CONFIG_SUNXI_RSB=y
CONFIG_TEGRA_ACONNECT=y
CONFIG_TEGRA_GMI=y
CONFIG_UNIPHIER_SYSTEM_BUS=y
CONFIG_VEXPRESS_CONFIG=y
CONFIG_FSL_MC_BUS=y
CONFIG_FSL_MC_UAPI_SUPPORT=y
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_PCI_GENERIC=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
CONFIG_ARM_SCMI_HAVE_MSG=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
CONFIG_ARM_SCMI_TRANSPORT_OPTEE=y
CONFIG_ARM_SCMI_TRANSPORT_SMC=y
CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE=y
CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE=y
CONFIG_ARM_SCMI_POWER_DOMAIN=y
CONFIG_ARM_SCMI_POWER_CONTROL=y
# end of ARM System Control and Management Interface Protocol

CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_ARM_SCPI_POWER_DOMAIN=y
CONFIG_ARM_SDE_INTERFACE=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_ISCSI_IBFT=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
CONFIG_INTEL_STRATIX10_SERVICE=y
CONFIG_INTEL_STRATIX10_RSU=y
CONFIG_MTK_ADSP_IPC=y
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_TURRIS_MOX_RWTM=y
CONFIG_ARM_FFA_TRANSPORT=y
CONFIG_ARM_FFA_SMCCC=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_TEE_BNXT_FW=y
CONFIG_CS_DSP=y
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB=y
CONFIG_EFI_ZBOOT=y
CONFIG_EFI_ZBOOT_SIGNING=y
CONFIG_EFI_ZBOOT_SIGNING_CERT=""
CONFIG_EFI_ZBOOT_SIGNING_KEY=""
CONFIG_EFI_ARMSTUB_DTB_LOADER=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
CONFIG_EFI_BOOTLOADER_CONTROL=y
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_EFI_TEST=y
CONFIG_RESET_ATTACK_MITIGATION=y
CONFIG_EFI_RCI2_TABLE=y
CONFIG_EFI_DISABLE_PCI_DMA=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
CONFIG_EFI_DISABLE_RUNTIME=y
CONFIG_EFI_COCO_SECRET=y
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_ARM=y
CONFIG_IMX_DSP=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
CONFIG_MESON_SM=y
CONFIG_ARM_PSCI_FW=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y

#
# Tegra firmware driver
#
CONFIG_TEGRA_IVC=y
CONFIG_TEGRA_BPMP=y
# end of Tegra firmware driver

#
# Zynq MPSoC Firmware Drivers
#
CONFIG_ZYNQMP_FIRMWARE=y
CONFIG_ZYNQMP_FIRMWARE_DEBUG=y
# end of Zynq MPSoC Firmware Drivers
# end of Firmware Drivers

CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_GNSS_USB=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BCM63XX_PARTS=y
CONFIG_MTD_BRCM_U_BOOT=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_OF_PARTS_BCM4908=y
CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
CONFIG_MTD_PARSER_IMAGETAG=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_PARSER_TRX=y
CONFIG_MTD_SHARPSL_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_QCOMSMEM_PARTS=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_PSTORE=y
CONFIG_MTD_SWAP=y
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_BT1_ROM=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
CONFIG_MTD_SC520CDP=y
CONFIG_MTD_NETSC520=y
CONFIG_MTD_TS5500=y
CONFIG_MTD_PCI=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_MCHP48L640=y
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_SAMSUNG=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_AMS_DELTA=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
CONFIG_MTD_NAND_SHARPSL=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_MARVELL=y
CONFIG_MTD_NAND_SLC_LPC32XX=y
CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_BRCMNAND_BCM63XX=y
CONFIG_MTD_NAND_BRCMNAND_BCMA=y
CONFIG_MTD_NAND_BRCMNAND_BCMBCA=y
CONFIG_MTD_NAND_BRCMNAND_BRCMSTB=y
CONFIG_MTD_NAND_BRCMNAND_IPROC=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_OXNAS=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_NAND_SH_FLCTL=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_NAND_TXX9NDFMC=y
CONFIG_MTD_NAND_JZ4780=y
CONFIG_MTD_NAND_INGENIC_ECC=y
CONFIG_MTD_NAND_JZ4740_ECC=y
CONFIG_MTD_NAND_JZ4725B_BCH=y
CONFIG_MTD_NAND_JZ4780_BCH=y
CONFIG_MTD_NAND_FSMC=y
CONFIG_MTD_NAND_SUNXI=y
CONFIG_MTD_NAND_HISI504=y
CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_TEGRA=y
CONFIG_MTD_NAND_STM32_FMC2=y
CONFIG_MTD_NAND_MESON=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
CONFIG_MTD_NAND_ARASAN=y
CONFIG_MTD_NAND_INTEL_LGM=y
CONFIG_MTD_NAND_ROCKCHIP=y
CONFIG_MTD_NAND_PL35X=y
CONFIG_MTD_NAND_RENESAS=y

#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=y

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
CONFIG_MTD_NAND_ECC_MEDIATEK=y
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
CONFIG_SPI_HISI_SFC=y
CONFIG_SPI_NXP_SPIFI=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=y
CONFIG_HBMC_AM654=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_ALL_DTBS=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_NUMA=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_CDROM=y
CONFIG_PARIDE=y

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
CONFIG_PARIDE_PCD=y
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
CONFIG_PARIDE_PG=y

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
CONFIG_PARIDE_BPCK=y
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
CONFIG_PARIDE_EPAT=y
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=y
CONFIG_PARIDE_FRIQ=y
CONFIG_PARIDE_FRPW=y
CONFIG_PARIDE_KBIC=y
CONFIG_PARIDE_KTTI=y
CONFIG_PARIDE_ON20=y
CONFIG_PARIDE_ON26=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
CONFIG_ZRAM=y
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_UBLK=y
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=y
CONFIG_BLK_DEV_RNBD_SERVER=y

#
# NVME Support
#
CONFIG_NVME_COMMON=y
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_RDMA=y
CONFIG_NVME_FC=y
CONFIG_NVME_TCP=y
CONFIG_NVME_AUTH=y
CONFIG_NVME_APPLE=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=y
CONFIG_NVME_TARGET_RDMA=y
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=y
CONFIG_NVME_TARGET_TCP=y
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_PHANTOM=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_GEHC_ACHC=y
CONFIG_HI6421V600_IRQ=y
CONFIG_HP_ILO=y
CONFIG_QCOM_COINCELL=y
CONFIG_QCOM_FASTRPC=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_PCH_PHUB=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_HISI_HIKEY_USB=y
CONFIG_OPEN_DICE=y
CONFIG_VCPU_STALL_DETECTOR=y
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support

CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_VMWARE_VMCI=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
CONFIG_BCM_VK=y
CONFIG_BCM_VK_TTY=y
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=y
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=y
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=y
CONFIG_PVPANIC_PCI=y
CONFIG_GP_PCI1XXXX=y
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_SCSI_HISI_SAS_DEBUGFS_DEFAULT_ENABLE=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPI3MR=y
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_SCSI_MYRB=y
CONFIG_SCSI_MYRS=y
CONFIG_XEN_SCSI_FRONTEND=y
CONFIG_HYPERV_STORAGE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_SCSI_SNIC=y
CONFIG_SCSI_SNIC_DEBUG_FS=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_PCI=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=y
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_TCM_QLA2XXX=y
CONFIG_TCM_QLA2XXX_DEBUG=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_QEDI=y
CONFIG_QEDF=y
CONFIG_SCSI_LPFC=y
CONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_EFCT=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
CONFIG_SCSI_WD719X=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCM=y
CONFIG_AHCI_DA850=y
CONFIG_AHCI_DM816=y
CONFIG_AHCI_DWC=y
CONFIG_AHCI_ST=y
CONFIG_AHCI_IMX=y
CONFIG_AHCI_CEVA=y
CONFIG_AHCI_MTK=y
CONFIG_AHCI_MVEBU=y
CONFIG_AHCI_SUNXI=y
CONFIG_AHCI_TEGRA=y
CONFIG_AHCI_XGENE=y
CONFIG_AHCI_QORIQ=y
CONFIG_SATA_FSL=y
CONFIG_SATA_GEMINI=y
CONFIG_SATA_AHCI_SEATTLE=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_DWC=y
CONFIG_SATA_DWC_OLD_DMA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_RCAR=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARASAN_CF=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_BK3710=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_FTIDE010=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IMX=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_PXA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_IXP4XX_CF=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SAMSUNG_CF=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_SMQ=y
CONFIG_DM_WRITECACHE=y
CONFIG_DM_EBS=y
CONFIG_DM_ERA=y
CONFIG_DM_CLONE=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_MULTIPATH_HST=y
CONFIG_DM_MULTIPATH_IOA=y
CONFIG_DM_DELAY=y
CONFIG_DM_DUST=y
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=y
CONFIG_DM_LOG_WRITES=y
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_TCM_USER2=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_ISCSI_TARGET_CXGB4=y
CONFIG_SBP_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_WIREGUARD=y
CONFIG_WIREGUARD_DEBUG=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
CONFIG_IPVTAP=y
CONFIG_VXLAN=y
CONFIG_GENEVE=y
CONFIG_BAREUDP=y
CONFIG_GTP=y
CONFIG_AMT=y
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_TAP=y
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_NET_VRF=y
CONFIG_VSOCKMON=y
CONFIG_MHI_NET=y
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=y
CONFIG_CAIF_DRIVERS=y
CONFIG_CAIF_TTY=y
CONFIG_CAIF_VIRTIO=y

#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
CONFIG_B53_SERDES=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
CONFIG_NET_DSA_MICROCHIP_KSZ_SPI=y
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MSCC_FELIX=y
CONFIG_NET_DSA_MSCC_SEVILLE=y
CONFIG_NET_DSA_AR9331=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_SJA1105=y
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_SJA1105_TAS=y
CONFIG_NET_DSA_SJA1105_VL=y
CONFIG_NET_DSA_XRS700X=y
CONFIG_NET_DSA_XRS700X_I2C=y
CONFIG_NET_DSA_XRS700X_MDIO=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_MDIO=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=y
CONFIG_NET_DSA_SMSC_LAN9303=y
CONFIG_NET_DSA_SMSC_LAN9303_I2C=y
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=y
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=y
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_ACTIONS=y
CONFIG_OWL_EMAC=y
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=y
CONFIG_NET_VENDOR_ALLWINNER=y
CONFIG_SUN4I_EMAC=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=y
CONFIG_PCNET32=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_AMD_XGBE=y
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=y
CONFIG_NET_XGENE_V2=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_ARC_EMAC_CORE=y
CONFIG_ARC_EMAC=y
CONFIG_EMAC_ROCKCHIP=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=y
CONFIG_SPI_AX88796C_COMPRESSION=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_ALX=y
CONFIG_CX_ECAT=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCM4908_ENET=y
CONFIG_BCMGENET=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=y
CONFIG_BNX2X_SRIOV=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
CONFIG_BGMAC_PLATFORM=y
CONFIG_SYSTEMPORT=y
CONFIG_BNXT=y
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=y
CONFIG_THUNDER_NIC_VF=y
CONFIG_THUNDER_NIC_BGX=y
CONFIG_THUNDER_NIC_RGX=y
CONFIG_CAVIUM_PTP=y
CONFIG_LIQUIDIO=y
CONFIG_LIQUIDIO_VF=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
CONFIG_CHELSIO_T4VF=y
CONFIG_CHELSIO_LIB=y
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CRYPTO_DEV_CHELSIO_TLS=y
CONFIG_CHELSIO_IPSEC_INLINE=y
CONFIG_CHELSIO_TLS_DEVICE=y
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
CONFIG_EP93XX_ETH=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9000=y
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
CONFIG_DM9051=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=y
CONFIG_TSNEP_SELFTESTS=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=y
CONFIG_FSL_FMAN=y
CONFIG_DPAA_ERRATUM_A050385=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
CONFIG_FSL_DPAA_ETH=y
CONFIG_FSL_DPAA2_ETH=y
CONFIG_FSL_DPAA2_ETH_DCB=y
CONFIG_FSL_DPAA2_PTP_CLOCK=y
CONFIG_FSL_DPAA2_SWITCH=y
CONFIG_FSL_ENETC=y
CONFIG_FSL_ENETC_VF=y
CONFIG_FSL_ENETC_IERB=y
CONFIG_FSL_ENETC_MDIO=y
CONFIG_FSL_ENETC_PTP_CLOCK=y
CONFIG_FSL_ENETC_QOS=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_FUN_CORE=y
CONFIG_FUN_ETH=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=y
CONFIG_NET_VENDOR_HISILICON=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_HISI_FEMAC=y
CONFIG_HIP04_ETH=y
CONFIG_HI13X1_GMAC=y
CONFIG_HNS_MDIO=y
CONFIG_HNS=y
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
CONFIG_HNS3=y
CONFIG_HNS3_HCLGE=y
CONFIG_HNS3_DCB=y
CONFIG_HNS3_HCLGEVF=y
CONFIG_HNS3_ENET=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=y
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=y
CONFIG_I40E_DCB=y
CONFIG_IAVF=y
CONFIG_I40EVF=y
CONFIG_ICE=y
CONFIG_ICE_SWITCHDEV=y
CONFIG_FM10K=y
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_NGBE=y
CONFIG_TXGBE=y
CONFIG_JME=y
CONFIG_KORINA=y
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_LITEX_LITEETH=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=y
CONFIG_MVMDIO=y
CONFIG_MVNETA=y
CONFIG_MVPP2=y
CONFIG_MVPP2_PTP=y
CONFIG_PXA168_ETH=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_OCTEONTX2_MBOX=y
CONFIG_OCTEONTX2_AF=y
CONFIG_NDC_DIS_DYNAMIC_CACHING=y
CONFIG_OCTEONTX2_PF=y
CONFIG_OCTEONTX2_VF=y
CONFIG_OCTEON_EP=y
CONFIG_PRESTERA=y
CONFIG_PRESTERA_PCI=y
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC_WED=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_MEDIATEK_STAR_EMAC=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=y
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
CONFIG_MLX5_TC_SAMPLE=y
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
CONFIG_MLX5_EN_MACSEC=y
CONFIG_MLX5_EN_IPSEC=y
CONFIG_MLX5_EN_TLS=y
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLX5_SF=y
CONFIG_MLX5_SF_MANAGER=y
CONFIG_MLXSW_CORE=y
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=y
CONFIG_MLXSW_I2C=y
CONFIG_MLXSW_SPECTRUM=y
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=y
CONFIG_MLXFW=y
CONFIG_MLXBF_GIGE=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_KSZ884X_PCI=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ENCX24J600=y
CONFIG_LAN743X=y
CONFIG_LAN966X_SWITCH=y
CONFIG_SPARX5_SWITCH=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_FEALNX=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
CONFIG_NS83820=y
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=y
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
CONFIG_NFP_DEBUG=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_AX88796=y
CONFIG_AX88796_93CX6=y
CONFIG_NE2K_PCI=y
CONFIG_PCMCIA_PCNET=y
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_LPC_ENET=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=y
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=y
CONFIG_QED=y
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=y
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
CONFIG_QCA7000_SPI=y
CONFIG_QCA7000_UART=y
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_SH_ETH=y
CONFIG_RAVB=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
CONFIG_SIS190=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=y
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=y
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
CONFIG_SFC_SIENA_SRIOV=y
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_EPIC100=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_SELFTESTS=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_DWMAC_GENERIC=y
CONFIG_DWMAC_ANARION=y
CONFIG_DWMAC_INGENIC=y
CONFIG_DWMAC_IPQ806X=y
CONFIG_DWMAC_LPC18XX=y
CONFIG_DWMAC_MEDIATEK=y
CONFIG_DWMAC_MESON=y
CONFIG_DWMAC_OXNAS=y
CONFIG_DWMAC_QCOM_ETHQOS=y
CONFIG_DWMAC_ROCKCHIP=y
CONFIG_DWMAC_SOCFPGA=y
CONFIG_DWMAC_STI=y
CONFIG_DWMAC_STM32=y
CONFIG_DWMAC_SUNXI=y
CONFIG_DWMAC_SUN8I=y
CONFIG_DWMAC_IMX8=y
CONFIG_DWMAC_INTEL_PLAT=y
CONFIG_DWMAC_VISCONTI=y
CONFIG_DWMAC_LOONGSON=y
CONFIG_STMMAC_PCI=y
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
CONFIG_NET_VENDOR_SUNPLUS=y
CONFIG_SP7021_EMAC=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=y
CONFIG_DWC_XLGMAC_PCI=y
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_TI_DAVINCI_MDIO=y
CONFIG_TI_CPSW_PHY_SEL=y
CONFIG_TI_CPSW=y
CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
CONFIG_TI_K3_AM65_CPSW_NUSS=y
CONFIG_TI_K3_AM65_CPSW_SWITCHDEV=y
CONFIG_TI_K3_AM65_CPTS=y
CONFIG_TI_AM65_CPSW_TAS=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=y
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_EMACLITE=y
CONFIG_XILINX_AXI_EMAC=y
CONFIG_XILINX_LL_TEMAC=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_QCOM_IPA=y
CONFIG_NET_SB1000=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=y

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
CONFIG_MESON_GXL_PHY=y
CONFIG_ADIN_PHY=y
CONFIG_ADIN1100_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM54140_PHY=y
CONFIG_BCM63XX_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_CYGNUS_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NET_PHYPTP=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
CONFIG_MARVELL_88X2222_PHY=y
CONFIG_MAXLINEAR_GPHY=y
CONFIG_MEDIATEK_GE_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_MOTORCOMM_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_C45_TJA11XX_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_TERANETICS_PHY=y
CONFIG_DP83822_PHY=y
CONFIG_DP83TC811_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
CONFIG_MICREL_KS8995MA=y
CONFIG_PSE_CONTROLLER=y
CONFIG_PSE_REGULATOR=y
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
CONFIG_CAN_AT91=y
CONFIG_CAN_CAN327=y
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_CAN_KVASER_PCIEFD=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_SUN4I=y
CONFIG_CAN_XILINXCAN=y
CONFIG_PCH_CAN=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_C_CAN_PCI=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_CTUCANFD=y
CONFIG_CAN_CTUCANFD_PCI=y
CONFIG_CAN_CTUCANFD_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_M_CAN_PCI=y
CONFIG_CAN_M_CAN_PLATFORM=y
CONFIG_CAN_M_CAN_TCAN4X5X=y
CONFIG_CAN_PEAK_PCIEFD=y
CONFIG_CAN_RCAR=y
CONFIG_CAN_RCAR_CANFD=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_EMS_PCI=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_F81601=y
CONFIG_CAN_KVASER_PCI=y
CONFIG_CAN_PEAK_PCI=y
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=y
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y

#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_MCP251XFD=y
CONFIG_CAN_MCP251XFD_SANITY=y
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB=y
CONFIG_CAN_ETAS_ES58X=y
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y
# end of CAN USB interfaces

CONFIG_CAN_DEBUG_DEVICES=y

#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=y
CONFIG_MCTP_TRANSPORT_I2C=y
# end of MCTP Device Drivers

CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=y
CONFIG_MDIO_XGENE=y
CONFIG_MDIO_ASPEED=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_I2C=y
CONFIG_MDIO_MVUSB=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_MOXART=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y
CONFIG_MDIO_THUNDER=y

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MESON_G12A=y
CONFIG_MDIO_BUS_MUX_BCM6368=y
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y

#
# PCS device drivers
#
CONFIG_PCS_XPCS=y
CONFIG_PCS_LYNX=y
CONFIG_PCS_RZN1_MIIC=y
CONFIG_PCS_ALTERA_TSE=y
# end of PCS device drivers

CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_CDC_PHONET=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
CONFIG_USB_RTL8153_ECM=y
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=y
CONFIG_ATH_COMMON=y
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_TRACEPOINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH5K_TEST_CHANNELS=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_TX99=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_ATH9K_COMMON_SPECTRAL=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
CONFIG_ATH6KL_SDIO=y
CONFIG_ATH6KL_USB=y
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL_TRACING=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=y
CONFIG_WIL6210=y
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=y
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=y
CONFIG_ATH10K_AHB=y
CONFIG_ATH10K_SDIO=y
CONFIG_ATH10K_USB=y
CONFIG_ATH10K_SNOC=y
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_TRACING=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=y
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_ATH11K=y
CONFIG_ATH11K_AHB=y
CONFIG_ATH11K_PCI=y
CONFIG_ATH11K_DEBUG=y
CONFIG_ATH11K_DEBUGFS=y
CONFIG_ATH11K_TRACING=y
CONFIG_ATH11K_SPECTRAL=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO_CS=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLEGACY=y
CONFIG_IWL4965=y
CONFIG_IWL3945=y

#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# end of iwl3945 / iwl4965 Debugging Options

CONFIG_IWLWIFI=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=y
CONFIG_IWLMVM=y

#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
# end of Debugging Options

CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_PCIE=y
CONFIG_MWIFIEX_USB=y
CONFIG_MWL8K=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=y
CONFIG_MT76_CORE=y
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=y
CONFIG_MT76_SDIO=y
CONFIG_MT76x02_LIB=y
CONFIG_MT76x02_USB=y
CONFIG_MT76_CONNAC_LIB=y
CONFIG_MT76x0_COMMON=y
CONFIG_MT76x0U=y
CONFIG_MT76x0E=y
CONFIG_MT76x2_COMMON=y
CONFIG_MT76x2E=y
CONFIG_MT76x2U=y
CONFIG_MT7603E=y
CONFIG_MT7615_COMMON=y
CONFIG_MT7615E=y
CONFIG_MT7622_WMAC=y
CONFIG_MT7663_USB_SDIO_COMMON=y
CONFIG_MT7663U=y
CONFIG_MT7663S=y
CONFIG_MT7915E=y
CONFIG_MT7986_WMAC=y
CONFIG_MT7921_COMMON=y
CONFIG_MT7921E=y
CONFIG_MT7921S=y
CONFIG_MT7921U=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=y
CONFIG_WILC1000_SDIO=y
CONFIG_WILC1000_SPI=y
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_PLFXLC=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=y
CONFIG_RT2400PCI=y
CONFIG_RT2500PCI=y
CONFIG_RT61PCI=y
CONFIG_RT2800PCI=y
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=y
CONFIG_RT73USB=y
CONFIG_RT2800USB=y
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=y
CONFIG_RT2800_LIB_MMIO=y
CONFIG_RT2X00_LIB_MMIO=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CE=y
CONFIG_RTL8192SE=y
CONFIG_RTL8192DE=y
CONFIG_RTL8723AE=y
CONFIG_RTL8723BE=y
CONFIG_RTL8188EE=y
CONFIG_RTL8192EE=y
CONFIG_RTL8821AE=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_PCI=y
CONFIG_RTLWIFI_USB=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8723_COMMON=y
CONFIG_RTLBTCOEXIST=y
CONFIG_RTL8XXXU=y
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=y
CONFIG_RTW88_CORE=y
CONFIG_RTW88_PCI=y
CONFIG_RTW88_8822B=y
CONFIG_RTW88_8822C=y
CONFIG_RTW88_8723D=y
CONFIG_RTW88_8821C=y
CONFIG_RTW88_8822BE=y
CONFIG_RTW88_8822CE=y
CONFIG_RTW88_8723DE=y
CONFIG_RTW88_8821CE=y
CONFIG_RTW88_DEBUG=y
CONFIG_RTW88_DEBUGFS=y
CONFIG_RTW89=y
CONFIG_RTW89_CORE=y
CONFIG_RTW89_PCI=y
CONFIG_RTW89_8852A=y
CONFIG_RTW89_8852C=y
CONFIG_RTW89_8852AE=y
CONFIG_RTW89_8852CE=y
CONFIG_RTW89_DEBUG=y
CONFIG_RTW89_DEBUGMSG=y
CONFIG_RTW89_DEBUGFS=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_USB=y
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_CW1200_WLAN_SPI=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=y
CONFIG_QTNFMAC_PCIE=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_MAC80211_HWSIM=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_VIRT_WIFI=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
CONFIG_FSL_UCC_HDLC=y
CONFIG_SLIC_DS26522=y
CONFIG_LAPBETHER=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_CC2520=y
CONFIG_IEEE802154_ATUSB=y
CONFIG_IEEE802154_ADF7242=y
CONFIG_IEEE802154_CA8210=y
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=y
CONFIG_IEEE802154_HWSIM=y

#
# Wireless WAN
#
CONFIG_WWAN=y
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=y
CONFIG_MHI_WWAN_CTRL=y
CONFIG_MHI_WWAN_MBIM=y
CONFIG_QCOM_BAM_DMUX=y
CONFIG_RPMSG_WWAN_CTRL=y
CONFIG_MTK_T7XX=y
# end of Wireless WAN

CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_VMXNET3=y
CONFIG_FUJITSU_ES=y
CONFIG_USB4_NET=y
CONFIG_HYPERV_NET=y
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
CONFIG_MISDN_HFCUSB=y
CONFIG_MISDN_AVMFRITZ=y
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=y
CONFIG_MISDN_NETJET=y
CONFIG_MISDN_HDLC=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_APPLESPI=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_CLPS711X=y
CONFIG_KEYBOARD_DLINK_DIR685=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_EP93XX=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_SNVS_PWRKEY=y
CONFIG_KEYBOARD_IMX=y
CONFIG_KEYBOARD_IMX_SC_KEY=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_PINEPHONE=y
CONFIG_KEYBOARD_PMIC8XXX=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_SH_KEYSC=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_SUN4I_LRADC=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_CAP11XX=y
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MT6779=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_KEYBOARD_CYPRESS_SF=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADC=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PSXPAD_SPI=y
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=y
CONFIG_JOYSTICK_QWIIC=y
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_JOYSTICK_SENSEHAT=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_HYCON_HY46XX=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_ILITEK=y
CONFIG_TOUCHSCREEN_IPROC=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MSG2638=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMAGIS=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=y
CONFIG_TOUCHSCREEN_MIGOR=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MXS_LRADC=y
CONFIG_TOUCHSCREEN_MX25=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TS4800=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TOUCHSCREEN_SUR40=y
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
CONFIG_TOUCHSCREEN_IQS5XX=y
CONFIG_TOUCHSCREEN_ZINITIX=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_ARIEL_PWRBUTTON=y
CONFIG_INPUT_ARIZONA_HAPTICS=y
CONFIG_INPUT_ATC260X_ONKEY=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_PM8XXX_VIBRATOR=y
CONFIG_INPUT_PMIC8XXX_PWRKEY=y
CONFIG_INPUT_MAX77650_ONKEY=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_CPCAP_PWRBUTTON=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA7280_HAPTICS=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_IBM_PANEL=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_IQS626A=y
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
CONFIG_INPUT_SOC_BUTTON_ARRAY=y
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_INPUT_HISI_POWERKEY=y
CONFIG_INPUT_RAVE_SP_PWRBUTTON=y
CONFIG_INPUT_SC27XX_VIBRA=y
CONFIG_INPUT_RT5120_PWRKEY=y
CONFIG_INPUT_STPMIC1_ONKEY=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
CONFIG_SERIO_OLPC_APSP=y
CONFIG_HYPERV_KEYBOARD=y
CONFIG_SERIO_SUN4I_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_IOC3=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=y
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
CONFIG_SERIAL_8250_LPC18XX=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_8250_INGENIC=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
CONFIG_SERIAL_8250_PXA=y
CONFIG_SERIAL_8250_TEGRA=y
CONFIG_SERIAL_8250_BCM7271=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
CONFIG_SERIAL_ATMEL_TTYAT=y
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_TEGRA_TCU=y
CONFIG_SERIAL_TEGRA_TCU_CONSOLE=y
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX_EARLYCON=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=18
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_EARLYCON=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_HS_LPC32XX=y
CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_ICOM=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
CONFIG_SERIAL_LANTIQ=y
CONFIG_SERIAL_LANTIQ_CONSOLE=y
CONFIG_SERIAL_QE=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_MXS_AUART=y
CONFIG_SERIAL_MXS_AUART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
CONFIG_SERIAL_MPS2_UART=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
CONFIG_SERIAL_STM32=y
CONFIG_SERIAL_STM32_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_OWL=y
CONFIG_SERIAL_OWL_CONSOLE=y
CONFIG_SERIAL_RDA=y
CONFIG_SERIAL_RDA_CONSOLE=y
CONFIG_SERIAL_MILBEAUT_USIO=y
CONFIG_SERIAL_MILBEAUT_USIO_PORTS=4
CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE=y
CONFIG_SERIAL_LITEUART=y
CONFIG_SERIAL_LITEUART_MAX_PORTS=1
CONFIG_SERIAL_LITEUART_CONSOLE=y
CONFIG_SERIAL_SUNPLUS=y
CONFIG_SERIAL_SUNPLUS_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
CONFIG_N_GSM=y
CONFIG_NOZOMI=y
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_HVC_DCC=y
CONFIG_HVC_DCC_SERIALIZE_SMP=y
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_IPMB=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
CONFIG_NPCM7XX_KCS_IPMI_BMC=y
CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
CONFIG_IPMI_KCS_BMC_SERIO=y
CONFIG_ASPEED_BT_IPMI_BMC=y
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_BA431=y
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_HISI=y
CONFIG_HW_RANDOM_XGENE=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_POLARFIRE_SOC=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_CAVIUM=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_OPTEE=y
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_HW_RANDOM_CCTRNG=y
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
CONFIG_HW_RANDOM_CN10K=y
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
CONFIG_IPWIRELESS=y
# end of PCMCIA character devices

CONFIG_DEVMEM=y
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=y
CONFIG_TCG_TIS_SYNQUACER=y
CONFIG_TCG_TIS_I2C_CR50=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
CONFIG_TCG_XEN=y
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_FTPM_TEE=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_PCIE=y
CONFIG_XILLYBUS_OF=y
CONFIG_XILLYUSB=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=y
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_AMD_MP2=y
CONFIG_I2C_HIX5HD2=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_CHT_WC=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_ALTERA=y
CONFIG_I2C_ASPEED=y
CONFIG_I2C_AT91=y
CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL=y
CONFIG_I2C_AXXIA=y
CONFIG_I2C_BCM2835=y
CONFIG_I2C_BCM_IPROC=y
CONFIG_I2C_BCM_KONA=y
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_DIGICOLOR=y
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_HIGHLANDER=y
CONFIG_I2C_HISI=y
CONFIG_I2C_IMG=y
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_IOP3XX=y
CONFIG_I2C_JZ4780=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_LPC2K=y
CONFIG_I2C_MLXBF=y
CONFIG_I2C_MESON=y
CONFIG_I2C_MICROCHIP_CORE=y
CONFIG_I2C_MT65XX=y
CONFIG_I2C_MT7621=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_MXS=y
CONFIG_I2C_NOMADIK=y
CONFIG_I2C_NPCM=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
CONFIG_I2C_APPLE=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_PNX=y
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=y
CONFIG_I2C_QCOM_GENI=y
CONFIG_I2C_QUP=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_RZV2M=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SPRD=y
CONFIG_I2C_ST=y
CONFIG_I2C_STM32F4=y
CONFIG_I2C_STM32F7=y
CONFIG_I2C_SUN6I_P2WI=y
CONFIG_I2C_SYNQUACER=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_TEGRA_BPMP=y
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_VERSATILE=y
CONFIG_I2C_WMT=y
CONFIG_I2C_THUNDERX=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_XLP9XX=y
CONFIG_I2C_RCAR=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_CP2615=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PCI1XXXX=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_XGENE_SLIMPRO=y
CONFIG_I2C_FSI=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_SLAVE_TESTUNIT=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
CONFIG_SVC_I3C_MASTER=y
CONFIG_MIPI_I3C_HCI=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_ALTERA_CORE=y
CONFIG_SPI_ALTERA_DFL=y
CONFIG_SPI_AR934X=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SPI_ASPEED_SMC=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_AT91_USART=y
CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
CONFIG_SPI_BCM63XX=y
CONFIG_SPI_BCM63XX_HSSPI=y
CONFIG_SPI_BCM_QSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_CADENCE_XSPI=y
CONFIG_SPI_CLPS711X=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_DW_BT1=y
CONFIG_SPI_DW_BT1_DIRMAP=y
CONFIG_SPI_DLN2=y
CONFIG_SPI_EP93XX=y
CONFIG_SPI_FSI=y
CONFIG_SPI_FSL_LPSPI=y
CONFIG_SPI_FSL_QUADSPI=y
CONFIG_SPI_GXP=y
CONFIG_SPI_HISI_KUNPENG=y
CONFIG_SPI_HISI_SFC_V3XX=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMG_SPFI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_INGENIC=y
CONFIG_SPI_INTEL=y
CONFIG_SPI_INTEL_PCI=y
CONFIG_SPI_INTEL_PLATFORM=y
CONFIG_SPI_JCORE=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_LP8841_RTC=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_MESON_SPICC=y
CONFIG_SPI_MESON_SPIFC=y
CONFIG_SPI_MICROCHIP_CORE=y
CONFIG_SPI_MICROCHIP_CORE_QSPI=y
CONFIG_SPI_MT65XX=y
CONFIG_SPI_MT7621=y
CONFIG_SPI_MTK_NOR=y
CONFIG_SPI_MTK_SNFI=y
CONFIG_SPI_NPCM_FIU=y
CONFIG_SPI_NPCM_PSPI=y
CONFIG_SPI_LANTIQ_SSC=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_TI_QSPI=y
CONFIG_SPI_OMAP_100K=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PIC32=y
CONFIG_SPI_PIC32_SQI=y
CONFIG_SPI_PL022=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_ROCKCHIP_SFC=y
CONFIG_SPI_RPCIF=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_QCOM_QSPI=y
CONFIG_SPI_QUP=y
CONFIG_SPI_QCOM_GENI=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH=y
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SLAVE_MT27XX=y
CONFIG_SPI_SPRD=y
CONFIG_SPI_SPRD_ADI=y
CONFIG_SPI_STM32=y
CONFIG_SPI_STM32_QSPI=y
CONFIG_SPI_ST_SSC4=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_SPI_SUNPLUS_SP7021=y
CONFIG_SPI_SYNQUACER=y
CONFIG_SPI_MXIC=y
CONFIG_SPI_TEGRA210_QUAD=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_THUNDERX=y
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_UNIPHIER=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_XLP=y
CONFIG_SPI_XTENSA_XTFPGA=y
CONFIG_SPI_ZYNQ_QSPI=y
CONFIG_SPI_ZYNQMP_GQSPI=y
CONFIG_SPI_AMD=y

#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=y
CONFIG_SPMI_MSM_PMIC_ARB=y
CONFIG_SPMI_MTK_PMIF=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y
CONFIG_DP83640_PHY=y
CONFIG_PTP_1588_CLOCK_INES=y
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
CONFIG_PTP_1588_CLOCK_OCP=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_APPLE_GPIO=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_AT91PIO4=y
CONFIG_PINCTRL_AXP209=y
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_CY8C95X0=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_DA9062=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_KEEMBAY=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MCP23S08_I2C=y
CONFIG_PINCTRL_MCP23S08_SPI=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_PISTACHIO=y
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_STMFX=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_THUNDERBAY=y
CONFIG_PINCTRL_ZYNQMP=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
CONFIG_PINCTRL_S700=y
CONFIG_PINCTRL_S900=y
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
CONFIG_PINCTRL_ASPEED_G6=y
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_BCM4908=y
CONFIG_PINCTRL_BCM63XX=y
CONFIG_PINCTRL_BCM6318=y
CONFIG_PINCTRL_BCM6328=y
CONFIG_PINCTRL_BCM6358=y
CONFIG_PINCTRL_BCM6362=y
CONFIG_PINCTRL_BCM6368=y
CONFIG_PINCTRL_BCM63268=y
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_CYGNUS_MUX=y
CONFIG_PINCTRL_NS=y
CONFIG_PINCTRL_NSP_GPIO=y
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX_SCU=y
CONFIG_PINCTRL_IMX8MM=y
CONFIG_PINCTRL_IMX8MN=y
CONFIG_PINCTRL_IMX8MP=y
CONFIG_PINCTRL_IMX8MQ=y
CONFIG_PINCTRL_IMX8QM=y
CONFIG_PINCTRL_IMX8QXP=y
CONFIG_PINCTRL_IMX8DXL=y
CONFIG_PINCTRL_IMX8ULP=y
CONFIG_PINCTRL_IMXRT1050=y
CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_IMXRT1170=y

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_ALDERLAKE=y
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_CEDARFORK=y
CONFIG_PINCTRL_DENVERTON=y
CONFIG_PINCTRL_ELKHARTLAKE=y
CONFIG_PINCTRL_EMMITSBURG=y
CONFIG_PINCTRL_GEMINILAKE=y
CONFIG_PINCTRL_ICELAKE=y
CONFIG_PINCTRL_JASPERLAKE=y
CONFIG_PINCTRL_LAKEFIELD=y
CONFIG_PINCTRL_LEWISBURG=y
CONFIG_PINCTRL_METEORLAKE=y
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_TIGERLAKE=y
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MT8135=y
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=y
CONFIG_PINCTRL_MT6779=y
CONFIG_PINCTRL_MT6795=y
CONFIG_PINCTRL_MT6797=y
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT7986=y
CONFIG_PINCTRL_MT8167=y
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
CONFIG_PINCTRL_MT8186=y
CONFIG_PINCTRL_MT8188=y
CONFIG_PINCTRL_MT8192=y
CONFIG_PINCTRL_MT8195=y
CONFIG_PINCTRL_MT8365=y
CONFIG_PINCTRL_MT8516=y
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
CONFIG_PINCTRL_MESON_G12A=y
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_MESON_S4=y
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_AC5=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_PINCTRL_WPCM450=y
CONFIG_PINCTRL_NPCM7XX=y
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ4019=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_IPQ6018=y
CONFIG_PINCTRL_MSM8226=y
CONFIG_PINCTRL_MSM8660=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MDM9607=y
CONFIG_PINCTRL_MDM9615=y
CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8909=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8953=y
CONFIG_PINCTRL_MSM8976=y
CONFIG_PINCTRL_MSM8994=y
CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_PINCTRL_SC7180=y
CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=y
CONFIG_PINCTRL_SC8180X=y
CONFIG_PINCTRL_SC8280XP=y
CONFIG_PINCTRL_SDM660=y
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SDX55=y
CONFIG_PINCTRL_SM6115=y
CONFIG_PINCTRL_SM6125=y
CONFIG_PINCTRL_SM6350=y
CONFIG_PINCTRL_SM6375=y
CONFIG_PINCTRL_SDX65=y
CONFIG_PINCTRL_SM8150=y
CONFIG_PINCTRL_SM8250=y
CONFIG_PINCTRL_SM8250_LPASS_LPI=y
CONFIG_PINCTRL_SM8350=y
CONFIG_PINCTRL_SM8450=y
CONFIG_PINCTRL_SM8450_LPASS_LPI=y
CONFIG_PINCTRL_SC8280XP_LPASS_LPI=y
CONFIG_PINCTRL_LPASS_LPI=y

#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A7794=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A7779=y
CONFIG_PINCTRL_PFC_R8A7790=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7793=y
CONFIG_PINCTRL_PFC_R8A7791=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A779F0=y
CONFIG_PINCTRL_PFC_R8A7792=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A779A0=y
CONFIG_PINCTRL_PFC_R8A779G0=y
CONFIG_PINCTRL_PFC_R8A7740=y
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_RZG2L=y
CONFIG_PINCTRL_PFC_R8A77470=y
CONFIG_PINCTRL_PFC_R8A7745=y
CONFIG_PINCTRL_PFC_R8A7742=y
CONFIG_PINCTRL_PFC_R8A7743=y
CONFIG_PINCTRL_PFC_R8A7744=y
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
CONFIG_PINCTRL_RZN1=y
CONFIG_PINCTRL_RZV2M=y
CONFIG_PINCTRL_PFC_SH7203=y
CONFIG_PINCTRL_PFC_SH7264=y
CONFIG_PINCTRL_PFC_SH7269=y
CONFIG_PINCTRL_PFC_SH7720=y
CONFIG_PINCTRL_PFC_SH7722=y
CONFIG_PINCTRL_PFC_SH7734=y
CONFIG_PINCTRL_PFC_SH7757=y
CONFIG_PINCTRL_PFC_SH7785=y
CONFIG_PINCTRL_PFC_SH7786=y
CONFIG_PINCTRL_PFC_SH73A0=y
CONFIG_PINCTRL_PFC_SH7723=y
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SHX3=y
# end of Renesas pinctrl drivers

CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
CONFIG_PINCTRL_S3C24XX=y
CONFIG_PINCTRL_S3C64XX=y
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STARFIVE_JH7100=y
CONFIG_PINCTRL_STM32=y
CONFIG_PINCTRL_STM32F429=y
CONFIG_PINCTRL_STM32F469=y
CONFIG_PINCTRL_STM32F746=y
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
CONFIG_PINCTRL_STM32MP135=y
CONFIG_PINCTRL_STM32MP157=y
CONFIG_PINCTRL_SUNXI=y
CONFIG_PINCTRL_SUN4I_A10=y
CONFIG_PINCTRL_SUN5I=y
CONFIG_PINCTRL_SUN6I_A31=y
CONFIG_PINCTRL_SUN6I_A31_R=y
CONFIG_PINCTRL_SUN8I_A23=y
CONFIG_PINCTRL_SUN8I_A33=y
CONFIG_PINCTRL_SUN8I_A83T=y
CONFIG_PINCTRL_SUN8I_A83T_R=y
CONFIG_PINCTRL_SUN8I_A23_R=y
CONFIG_PINCTRL_SUN8I_H3=y
CONFIG_PINCTRL_SUN8I_H3_R=y
CONFIG_PINCTRL_SUN8I_V3S=y
CONFIG_PINCTRL_SUN9I_A80=y
CONFIG_PINCTRL_SUN9I_A80_R=y
CONFIG_PINCTRL_SUN20I_D1=y
CONFIG_PINCTRL_SUN50I_A64=y
CONFIG_PINCTRL_SUN50I_A64_R=y
CONFIG_PINCTRL_SUN50I_A100=y
CONFIG_PINCTRL_SUN50I_A100_R=y
CONFIG_PINCTRL_SUN50I_H5=y
CONFIG_PINCTRL_SUN50I_H6=y
CONFIG_PINCTRL_SUN50I_H6_R=y
CONFIG_PINCTRL_SUN50I_H616=y
CONFIG_PINCTRL_SUN50I_H616_R=y
CONFIG_PINCTRL_TEGRA=y
CONFIG_PINCTRL_TEGRA124=y
CONFIG_PINCTRL_TEGRA210=y
CONFIG_PINCTRL_TEGRA194=y
CONFIG_PINCTRL_TEGRA_XUSB=y
CONFIG_PINCTRL_TI_IODELAY=y
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
CONFIG_PINCTRL_UNIPHIER_PXS3=y
CONFIG_PINCTRL_UNIPHIER_NX1=y
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_REGMAP=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_AMDPT=y
CONFIG_GPIO_ASPEED=y
CONFIG_GPIO_ASPEED_SGPIO=y
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_RASPBERRYPI_EXP=y
CONFIG_GPIO_BCM_KONA=y
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EIC_SPRD=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_EXAR=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HISI=y
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_IMX_SCU=y
CONFIG_GPIO_IOP=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_LPC18XX=y
CONFIG_GPIO_LPC32XX=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_GPIO_MT7621=y
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_MXS=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_PMIC_EIC_SPRD=y
CONFIG_GPIO_PXA=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_RDA=y
CONFIG_GPIO_ROCKCHIP=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_THUNDERX=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_VF610=y
CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_WCD934X=y
CONFIG_GPIO_XGENE=y
CONFIG_GPIO_XGENE_SB=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_XLP=y
CONFIG_GPIO_ZYNQ=y
CONFIG_GPIO_ZYNQMP_MODEPIN=y
CONFIG_GPIO_AMD_FCH=y
CONFIG_GPIO_IDT3243X=y
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
CONFIG_GPIO_TS4900=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ALTERA_A10SR=y
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD71815=y
CONFIG_GPIO_BD71828=y
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_UCB1400=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_MLXBF=y
CONFIG_GPIO_MLXBF2=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
CONFIG_GPIO_MOXTET=y
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=y
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_VIRTIO=y
CONFIG_GPIO_SIM=y
# end of Virtual GPIO drivers

CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_ATC260X=y
CONFIG_POWER_RESET_BRCMKONA=y
CONFIG_POWER_RESET_BRCMSTB=y
CONFIG_POWER_RESET_GEMINI_POWEROFF=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_HISI=y
CONFIG_POWER_RESET_LINKSTATION=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_RESET_QCOM_PON=y
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_PIIX4_POWEROFF=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_TPS65086=y
CONFIG_POWER_RESET_VEXPRESS=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_POWER_RESET_SC27XX=y
CONFIG_NVMEM_REBOOT_MODE=y
CONFIG_POWER_MLXBF=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_IP5XXX_POWER=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=y
CONFIG_BATTERY_CW2015=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_LEGO_EV3=y
CONFIG_BATTERY_OLPC=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_BATTERY_INGENIC=y
CONFIG_BATTERY_WM97XX=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_DA9150=y
CONFIG_BATTERY_DA9150=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_BATTERY_TWL4030_MADC=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_CPCAP=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_LTC4162L=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX77976=y
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_MP2629=y
CONFIG_CHARGER_MT6360=y
CONFIG_CHARGER_MT6370=y
CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_RK817=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_CHARGER_TPS65217=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_CROS_USBPD=y
CONFIG_CHARGER_CROS_PCHG=y
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=y
CONFIG_CHARGER_WILCO=y
CONFIG_RN5T618_POWER=y
CONFIG_BATTERY_ACER_A500=y
CONFIG_BATTERY_SURFACE=y
CONFIG_CHARGER_SURFACE=y
CONFIG_BATTERY_UG3105=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AHT10=y
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_BT1_PVT=y
CONFIG_SENSORS_BT1_PVT_ALARMS=y
CONFIG_SENSORS_CORSAIR_CPRO=y
CONFIG_SENSORS_CORSAIR_PSU=y
CONFIG_SENSORS_DRIVETEMP=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_SPARX5=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LAN966X=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC2992=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX127=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX31730=y
CONFIG_SENSORS_MAX31760=y
CONFIG_SENSORS_MAX6620=y
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_TPS23861=y
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_MR75203=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775_CORE=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT6775_I2C=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_NSA320=y
CONFIG_SENSORS_NZXT_KRAKEN2=y
CONFIG_SENSORS_NZXT_SMART2=y
CONFIG_SENSORS_OCC_P8_I2C=y
CONFIG_SENSORS_OCC_P9_SBE=y
CONFIG_SENSORS_OCC=y
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_PECI_CPUTEMP=y
CONFIG_SENSORS_PECI_DIMMTEMP=y
CONFIG_SENSORS_PECI=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1266=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_BPA_RS600=y
CONFIG_SENSORS_DELTA_AHE50DC_FAN=y
CONFIG_SENSORS_FSP_3Y=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_DPS920AB=y
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR36021=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IR38064_REGULATOR=y
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LM25066_REGULATOR=y
CONFIG_SENSORS_LT7182S=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX15301=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX16601=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_MP2888=y
CONFIG_SENSORS_MP2975=y
CONFIG_SENSORS_MP5023=y
CONFIG_SENSORS_PIM4328=y
CONFIG_SENSORS_PLI1209BC=y
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
CONFIG_SENSORS_PM6764TR=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_Q54SJ108A2=y
CONFIG_SENSORS_STPDDC60=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_TPS546D24=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE152=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_RASPBERRYPI_HWMON=y
CONFIG_SENSORS_SL28CPLD=y
CONFIG_SENSORS_SBTSI=y
CONFIG_SENSORS_SBRMI=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHT4x=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SY7636A=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC2305=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA238=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP464=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VEXPRESS=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_XGENE=y
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_CPU_IDLE_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_IMX_SC_THERMAL=y
CONFIG_IMX8MM_THERMAL=y
CONFIG_K3_THERMAL=y
CONFIG_MAX77620_THERMAL=y
CONFIG_QORIQ_THERMAL=y
CONFIG_SPEAR_THERMAL=y
CONFIG_SUN8I_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_RZG2L_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=y
CONFIG_MTK_THERMAL=y
CONFIG_AMLOGIC_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_MENLOW=y
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
CONFIG_BCM2711_THERMAL=y
CONFIG_BCM2835_THERMAL=y
CONFIG_BRCMSTB_THERMAL=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BCM_SR_THERMAL=y
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
CONFIG_OMAP3_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=y
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
CONFIG_TEGRA_SOCTHERM=y
CONFIG_TEGRA_BPMP_THERMAL=y
CONFIG_TEGRA30_TSENSOR=y
# end of NVIDIA Tegra thermal drivers

CONFIG_GENERIC_ADC_THERMAL=y

#
# Qualcomm thermal drivers
#
CONFIG_QCOM_TSENS=y
CONFIG_QCOM_SPMI_ADC_TM5=y
CONFIG_QCOM_SPMI_TEMP_ALARM=y
CONFIG_QCOM_LMH=y
# end of Qualcomm thermal drivers

CONFIG_UNIPHIER_THERMAL=y
CONFIG_SPRD_THERMAL=y
CONFIG_KHADAS_MCU_FAN_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD957XMUF_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WDAT_WDT=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_MLX_WDT=y
CONFIG_SL28CPLD_WATCHDOG=y
CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ARM_SBSA_WATCHDOG=y
CONFIG_ARMADA_37XX_WATCHDOG=y
CONFIG_ASM9260_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_FTWDT010_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_EP93XX_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_K3_RTI_WATCHDOG=y
CONFIG_RN5T618_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_NPCM7XX_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
CONFIG_TS4800_WATCHDOG=y
CONFIG_TS72XX_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_IMX_SC_WDT=y
CONFIG_IMX7ULP_WDT=y
CONFIG_RETU_WATCHDOG=y
CONFIG_MOXART_WDT=y
CONFIG_ST_LPC_WATCHDOG=y
CONFIG_TEGRA_WATCHDOG=y
CONFIG_QCOM_WDT=y
CONFIG_MESON_GXBB_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_DIGICOLOR_WATCHDOG=y
CONFIG_ARM_SMC_WATCHDOG=y
CONFIG_LPC18XX_WATCHDOG=y
CONFIG_RENESAS_WDT=y
CONFIG_RENESAS_RZAWDT=y
CONFIG_RENESAS_RZN1WDT=y
CONFIG_RENESAS_RZG2LWDT=y
CONFIG_ASPEED_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_RTD119X_WATCHDOG=y
CONFIG_REALTEK_OTTO_WDT=y
CONFIG_SPRD_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=y
CONFIG_VISCONTI_WATCHDOG=y
CONFIG_MSC313E_WATCHDOG=y
CONFIG_APPLE_WATCHDOG=y
CONFIG_SUNPLUS_WATCHDOG=y
CONFIG_ALIM7101_WDT=y
CONFIG_SC520_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_KEMPLD_WDT=y
CONFIG_RDC321X_WDT=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCM2835_WDT=y
CONFIG_BCM_KONA_WDT=y
CONFIG_BCM_KONA_WDT_DEBUG=y
CONFIG_BCM7038_WDT=y
CONFIG_IMGPDC_WDT=y
CONFIG_MPC5200_WDT=y
CONFIG_MEN_A21_WDT=y
CONFIG_XEN_WDT=y
CONFIG_UML_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_KEEMBAY_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_PFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ALTERA_A10SR=y
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_AT91_USART=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AC100=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_MFD_ASIC3=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_ENE_KB3930=y
CONFIG_MFD_EXYNOS_LPASS=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_MP2629=y
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI6421_SPMI=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_CHTWC=y
CONFIG_MFD_IQS62X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77714=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=y
CONFIG_MFD_MT6370=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_OCELOT=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_NTXEC=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_PM8XXX=y
CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SY7636A=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT4831=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RT5120=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SIMPLE_MFD_I2C=y
CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SC27XX_PMIC=y
CONFIG_ABX500_CORE=y
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers

CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_STW481X=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD71828=y
CONFIG_MFD_ROHM_BD957XMUF=y
CONFIG_MFD_STM32_LPTIMER=y
CONFIG_MFD_STM32_TIMERS=y
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_KHADAS_MCU=y
CONFIG_MFD_ACER_A500_EC=y
CONFIG_MFD_QCOM_PM8008=y
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_RAVE_SP_CORE=y
CONFIG_MFD_INTEL_M10_BMC=y
CONFIG_MFD_RSMU_I2C=y
CONFIG_MFD_RSMU_SPI=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_ARM_SCMI=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD71815=y
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_BD957XMUF=y
CONFIG_REGULATOR_CPCAP=y
CONFIG_REGULATOR_CROS_EC=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9121=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_HI6421V600=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8893=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6331=y
CONFIG_REGULATOR_MT6332=y
CONFIG_REGULATOR_MT6358=y
CONFIG_REGULATOR_MT6359=y
CONFIG_REGULATOR_MT6360=y
CONFIG_REGULATOR_MT6370=y
CONFIG_REGULATOR_MT6380=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPM=y
CONFIG_REGULATOR_QCOM_RPMH=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_QCOM_SPMI=y
CONFIG_REGULATOR_QCOM_USB_VBUS=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT4831=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_RT5120=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=y
CONFIG_REGULATOR_RT6160=y
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
CONFIG_REGULATOR_RTQ6752=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SC2731=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_STM32_BOOSTER=y
CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_STM32_PWR=y
CONFIG_REGULATOR_STPMIC1=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_STW481X_VMMC=y
CONFIG_REGULATOR_SY7636A=y
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
CONFIG_REGULATOR_SY8827N=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS6286X=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS68470=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_REGULATOR_VQMMC_IPQ4019=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_REGULATOR_QCOM_LABIBB=y
CONFIG_RC_CORE=y
CONFIG_BPF_LIRC_MODE2=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=y
CONFIG_IR_FINTEK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=y
CONFIG_IR_HIX5HD2=y
CONFIG_IR_IGORPLUGUSB=y
CONFIG_IR_IGUANA=y
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_MESON=y
CONFIG_IR_MESON_TX=y
CONFIG_IR_MTK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_PWM_TX=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_RX51=y
CONFIG_IR_SERIAL=y
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SPI=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_SUNXI=y
CONFIG_IR_TOY=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_RC_LOOPBACK=y
CONFIG_RC_ST=y
CONFIG_RC_XBOX_DVD=y
CONFIG_IR_IMG=y
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_IR_IMG_RC5=y
CONFIG_IR_IMG_RC6=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y

#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
CONFIG_CEC_PIN_ERROR_INJ=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=y
CONFIG_CEC_CROS_EC=y
CONFIG_CEC_MESON_AO=y
CONFIG_CEC_MESON_G12A_AO=y
CONFIG_CEC_GPIO=y
CONFIG_CEC_SAMSUNG_S5P=y
CONFIG_CEC_STI=y
CONFIG_CEC_STM32=y
CONFIG_CEC_TEGRA=y
CONFIG_CEC_SECO=y
CONFIG_CEC_SECO_RC=y
CONFIG_USB_PULSE8_CEC=y
CONFIG_USB_RAINSHADOW_CEC=y
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_JPEG_HELPER=y
CONFIG_V4L2_H264=y
CONFIG_V4L2_VP9=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
# end of Media controller options

#
# Digital TV options
#
CONFIG_DVB_MMAP=y
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
CONFIG_DVB_ULE_DEBUG=y
# end of Digital TV options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_GSPCA=y
CONFIG_USB_GSPCA_BENQ=y
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
CONFIG_USB_GSPCA_SONIXJ=y
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SPCA500=y
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
CONFIG_USB_GSPCA_SPCA506=y
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_SQ905=y
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TOPRO=y
CONFIG_USB_GSPCA_TOUPTEK=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_USB_GL860=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=y
CONFIG_VIDEO_USBTV=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=y
CONFIG_VIDEO_GO7007_USB=y
CONFIG_VIDEO_GO7007_LOADER=y
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=y
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=y
CONFIG_VIDEO_CX231XX_DVB=y

#
# Digital TV USB devices
#
CONFIG_DVB_AS102=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_DVBSKY=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
CONFIG_DVB_USB_ZD1301=y
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_AZ6027=y
CONFIG_DVB_USB_CINERGY_T2=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_DIB3000MC=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_DTV5100=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_PCTV452E=y
CONFIG_DVB_USB_TECHNISAT_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_VP7045=y
CONFIG_SMS_USB_DRV=y
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
CONFIG_VIDEO_EM28XX_ALSA=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_EM28XX_RC=y

#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=y
CONFIG_USB_HACKRF=y
CONFIG_USB_MSI2500=y
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=y
CONFIG_STA2X11_VIP=y
CONFIG_VIDEO_TW5864=y
CONFIG_VIDEO_TW68=y
CONFIG_VIDEO_TW686X=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=y
CONFIG_VIDEO_ZORAN_BUZ=y
CONFIG_VIDEO_ZORAN_DC10=y
CONFIG_VIDEO_ZORAN_LML33=y
CONFIG_VIDEO_ZORAN_LML33R10=y
CONFIG_VIDEO_ZORAN_AVS6EYES=y

#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=y
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_IVTV_ALSA=y
CONFIG_VIDEO_FB_IVTV=y

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=y
CONFIG_DVB_BT8XX=y
CONFIG_VIDEO_COBALT=y
CONFIG_VIDEO_CX18=y
CONFIG_VIDEO_CX18_ALSA=y
CONFIG_VIDEO_CX23885=y
CONFIG_MEDIA_ALTERA_CI=y
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX25821_ALSA=y
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_ALSA=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=y
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=y
CONFIG_VIDEO_CX88_MPEG=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=y
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=y
CONFIG_VIDEO_SAA7134_GO7007=y
CONFIG_VIDEO_SAA7164=y

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_DDBRIDGE=y
CONFIG_DVB_DDBRIDGE_MSIENABLE=y
CONFIG_DVB_DM1105=y
CONFIG_MANTIS_CORE=y
CONFIG_DVB_MANTIS=y
CONFIG_DVB_HOPPER=y
CONFIG_DVB_NETUP_UNIDVB=y
CONFIG_DVB_NGENE=y
CONFIG_DVB_PLUTO2=y
CONFIG_DVB_PT1=y
CONFIG_DVB_PT3=y
CONFIG_DVB_SMIPCIE=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_RADIO_SI4713=y
CONFIG_RADIO_SI476X=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_TIMBERDALE=y
CONFIG_RADIO_WL1273=y
CONFIG_USB_DSBR=y
CONFIG_USB_KEENE=y
CONFIG_USB_MA901=y
CONFIG_USB_MR800=y
CONFIG_USB_RAREMONO=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_RADIO_WL128X=y
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_AZTECH=y
CONFIG_RADIO_AZTECH_PORT=350
CONFIG_RADIO_CADET=y
CONFIG_RADIO_GEMTEK=y
CONFIG_RADIO_GEMTEK_PORT=34c
CONFIG_RADIO_GEMTEK_PROBE=y
CONFIG_RADIO_ISA=y
CONFIG_RADIO_RTRACK=y
CONFIG_RADIO_RTRACK2=y
CONFIG_RADIO_RTRACK2_PORT=30c
CONFIG_RADIO_RTRACK_PORT=30f
CONFIG_RADIO_SF16FMI=y
CONFIG_RADIO_SF16FMR2=y
CONFIG_RADIO_TERRATEC=y
CONFIG_RADIO_TRUST=y
CONFIG_RADIO_TRUST_PORT=350
CONFIG_RADIO_TYPHOON=y
CONFIG_RADIO_TYPHOON_MUTEFREQ=87500
CONFIG_RADIO_TYPHOON_PORT=316
CONFIG_RADIO_ZOLTRIX=y
CONFIG_RADIO_ZOLTRIX_PORT=20c
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_MUX=y

#
# Allegro DVT media platform drivers
#
CONFIG_VIDEO_ALLEGRO_DVT=y

#
# Amlogic media platform drivers
#
CONFIG_VIDEO_MESON_GE2D=y

#
# Amphion drivers
#
CONFIG_VIDEO_AMPHION_VPU=y

#
# Aspeed media platform drivers
#
CONFIG_VIDEO_ASPEED=y

#
# Atmel media platform drivers
#
CONFIG_VIDEO_ATMEL_ISC=y
CONFIG_VIDEO_ATMEL_XISC=y
CONFIG_VIDEO_ATMEL_ISC_BASE=y
CONFIG_VIDEO_ATMEL_ISI=y
CONFIG_VIDEO_MICROCHIP_CSI2DC=y

#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=y
CONFIG_VIDEO_CADENCE_CSI2TX=y

#
# Chips&Media media platform drivers
#
CONFIG_VIDEO_CODA=y
CONFIG_VIDEO_IMX_VDOA=y

#
# Intel media platform drivers
#
CONFIG_VIDEO_PXA27x=y

#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_VIDEO_MMP_CAMERA=y

#
# Mediatek media platform drivers
#
CONFIG_VIDEO_MEDIATEK_JPEG=y
CONFIG_VIDEO_MEDIATEK_MDP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_SCP=y
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC=y
CONFIG_VIDEO_MEDIATEK_VPU=y
CONFIG_VIDEO_MEDIATEK_MDP3=y

#
# NVidia media platform drivers
#
CONFIG_VIDEO_TEGRA_VDE=y

#
# NXP media platform drivers
#
CONFIG_VIDEO_IMX_MIPI_CSIS=y
CONFIG_VIDEO_IMX_PXP=y
CONFIG_VIDEO_MX2_EMMAPRP=y
CONFIG_VIDEO_DW100=y
CONFIG_VIDEO_IMX8_JPEG=y

#
# Qualcomm media platform drivers
#
CONFIG_VIDEO_QCOM_CAMSS=y
CONFIG_VIDEO_QCOM_VENUS=y

#
# Renesas media platform drivers
#
CONFIG_VIDEO_RENESAS_CEU=y
CONFIG_VIDEO_RCAR_ISP=y
CONFIG_VIDEO_SH_VOU=y
CONFIG_VIDEO_RCAR_CSI2=y
CONFIG_VIDEO_RCAR_VIN=y
CONFIG_VIDEO_RENESAS_FCP=y
CONFIG_VIDEO_RENESAS_FDP1=y
CONFIG_VIDEO_RENESAS_JPU=y
CONFIG_VIDEO_RENESAS_VSP1=y
CONFIG_VIDEO_RCAR_DRIF=y

#
# Rockchip media platform drivers
#
CONFIG_VIDEO_ROCKCHIP_RGA=y
CONFIG_VIDEO_ROCKCHIP_ISP1=y

#
# Samsung media platform drivers
#
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=y
CONFIG_VIDEO_EXYNOS4_IS_COMMON=y
CONFIG_VIDEO_S5P_FIMC=y
CONFIG_VIDEO_S5P_MIPI_CSIS=y
CONFIG_VIDEO_EXYNOS_FIMC_LITE=y
CONFIG_VIDEO_EXYNOS4_FIMC_IS=y
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
CONFIG_VIDEO_S3C_CAMIF=y
CONFIG_VIDEO_SAMSUNG_S5P_G2D=y
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y
CONFIG_VIDEO_SAMSUNG_S5P_MFC=y

#
# STMicroelectronics media platform drivers
#
CONFIG_VIDEO_STI_BDISP=y
CONFIG_DVB_C8SECTPFE=y
CONFIG_VIDEO_STI_DELTA=y
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_DELTA_DRIVER=y
CONFIG_VIDEO_STI_HVA=y
CONFIG_VIDEO_STI_HVA_DEBUGFS=y
CONFIG_VIDEO_STM32_DCMI=y
CONFIG_VIDEO_STM32_DMA2D=y

#
# Sunxi media platform drivers
#
CONFIG_VIDEO_SUN4I_CSI=y
CONFIG_VIDEO_SUN6I_CSI=y
CONFIG_VIDEO_SUN6I_MIPI_CSI2=y
CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2=y
CONFIG_VIDEO_SUN8I_DEINTERLACE=y
CONFIG_VIDEO_SUN8I_ROTATE=y

#
# Texas Instruments drivers
#
CONFIG_VIDEO_TI_VPDMA=y
CONFIG_VIDEO_TI_SC=y
CONFIG_VIDEO_TI_CSC=y
CONFIG_VIDEO_TI_CAL=y
CONFIG_VIDEO_TI_CAL_MC=y
CONFIG_VIDEO_TI_VPE=y
CONFIG_VIDEO_TI_VPE_DEBUG=y
CONFIG_VIDEO_AM437X_VPFE=y
CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y
CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY=y
CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
CONFIG_VIDEO_OMAP2_VOUT=y
CONFIG_VIDEO_OMAP3=y
CONFIG_VIDEO_OMAP3_DEBUG=y

#
# Verisilicon media platform drivers
#
CONFIG_VIDEO_HANTRO=y
CONFIG_VIDEO_HANTRO_IMX8M=y
CONFIG_VIDEO_HANTRO_SAMA5D4=y
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_HANTRO_SUNXI=y

#
# VIA media platform drivers
#
CONFIG_VIDEO_VIA_CAMERA=y

#
# Xilinx media platform drivers
#
CONFIG_VIDEO_XILINX=y
CONFIG_VIDEO_XILINX_CSI2RXSS=y
CONFIG_VIDEO_XILINX_TPG=y
CONFIG_VIDEO_XILINX_VTC=y

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIM2M=y
CONFIG_VIDEO_VICODEC=y
CONFIG_VIDEO_VIMC=y
CONFIG_VIDEO_VIVID=y
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=y

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_TTPCI_EEPROM=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=y
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y

#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_CCS_PLL=y
CONFIG_VIDEO_AR0521=y
CONFIG_VIDEO_HI556=y
CONFIG_VIDEO_HI846=y
CONFIG_VIDEO_HI847=y
CONFIG_VIDEO_IMX208=y
CONFIG_VIDEO_IMX214=y
CONFIG_VIDEO_IMX219=y
CONFIG_VIDEO_IMX258=y
CONFIG_VIDEO_IMX274=y
CONFIG_VIDEO_IMX290=y
CONFIG_VIDEO_IMX319=y
CONFIG_VIDEO_IMX334=y
CONFIG_VIDEO_IMX335=y
CONFIG_VIDEO_IMX355=y
CONFIG_VIDEO_IMX412=y
CONFIG_VIDEO_MAX9271_LIB=y
CONFIG_VIDEO_MT9M001=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9P031=y
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_OG01A1B=y
CONFIG_VIDEO_OV02A10=y
CONFIG_VIDEO_OV08D10=y
CONFIG_VIDEO_OV13858=y
CONFIG_VIDEO_OV13B10=y
CONFIG_VIDEO_OV2640=y
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
CONFIG_VIDEO_OV2740=y
CONFIG_VIDEO_OV5640=y
CONFIG_VIDEO_OV5645=y
CONFIG_VIDEO_OV5647=y
CONFIG_VIDEO_OV5648=y
CONFIG_VIDEO_OV5670=y
CONFIG_VIDEO_OV5675=y
CONFIG_VIDEO_OV5693=y
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV6650=y
CONFIG_VIDEO_OV7251=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV8856=y
CONFIG_VIDEO_OV8865=y
CONFIG_VIDEO_OV9282=y
CONFIG_VIDEO_OV9640=y
CONFIG_VIDEO_OV9650=y
CONFIG_VIDEO_OV9734=y
CONFIG_VIDEO_RDACM20=y
CONFIG_VIDEO_RDACM21=y
CONFIG_VIDEO_RJ54N1=y
CONFIG_VIDEO_S5C73M3=y
CONFIG_VIDEO_S5K4ECGX=y
CONFIG_VIDEO_S5K5BAF=y
CONFIG_VIDEO_S5K6A3=y
CONFIG_VIDEO_S5K6AA=y
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_CCS=y
CONFIG_VIDEO_ET8EK8=y
CONFIG_VIDEO_M5MOLS=y
# end of Camera sensor devices

#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
CONFIG_VIDEO_AK7375=y
CONFIG_VIDEO_DW9714=y
CONFIG_VIDEO_DW9768=y
CONFIG_VIDEO_DW9807_VCM=y
# end of Lens drivers

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_LM3560=y
CONFIG_VIDEO_LM3646=y
# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_SONY_BTF_MPX=y
CONFIG_VIDEO_TDA1997X=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
# end of RDS decoders

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_ADV748X=y
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ADV7604_CEC=y
CONFIG_VIDEO_ADV7842=y
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_ISL7998X=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_MAX9286=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TC358743=y
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_AD9389B=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_THS8200=y
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips

#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_ST_MIPID02=y
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=y
CONFIG_VIDEO_GS1662=y
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_MN88472=y
CONFIG_DVB_MN88473=y
CONFIG_DVB_SI2165=y
CONFIG_DVB_TDA18271C2DD=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_TDA10071=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA8261=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=y
CONFIG_DVB_AS102_FE=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_CXD2841ER=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_EC100=y
CONFIG_DVB_GP8PSK_FE=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_RTL2832_SDR=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_SI2168=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_STV0367=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_ZD1301_DEMOD=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_CXD2880=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_VES1820=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LGDT3306A=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_MXL692=y
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
CONFIG_DVB_S921=y

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MN88443X=y
CONFIG_DVB_TC90522=y

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=y
CONFIG_DVB_AF9033=y
CONFIG_DVB_ASCOT2E=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_HELENE=y
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_DRX39XYJ=y

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
CONFIG_DVB_SP2=y
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_TEGRA_HOST1X_CONTEXT_BUS=y
CONFIG_TEGRA_HOST1X=y
CONFIG_TEGRA_HOST1X_FIREWALL=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_USE_DYNAMIC_DEBUG=y
CONFIG_DRM_KUNIT_TEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS=y
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_BUDDY=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
CONFIG_DRM_HDLCD=y
CONFIG_DRM_HDLCD_SHOW_UNDERRUN=y
CONFIG_DRM_MALI_DISPLAY=y
CONFIG_DRM_KOMEDA=y
# end of ARM devices

CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=y
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y

#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration

#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_HDCP=y
CONFIG_DRM_AMD_DC_SI=y
CONFIG_DEBUG_KERNEL_DC=y
# end of Display Engine Configuration

CONFIG_HSA_AMD=y
CONFIG_HSA_AMD_SVM=y
CONFIG_HSA_AMD_P2P=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_PLATFORM_DRIVER=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
CONFIG_NOUVEAU_DEBUG_PUSH=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_SVM=y
CONFIG_DRM_KMB_DISPLAY=y
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
CONFIG_DRM_EXYNOS=y

#
# CRTCs
#
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS_MIXER=y
CONFIG_DRM_EXYNOS_VIDI=y

#
# Encoders and Bridges
#
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y

#
# Sub-drivers
#
CONFIG_DRM_EXYNOS_G2D=y
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
CONFIG_DRM_EXYNOS_ROTATOR=y
CONFIG_DRM_EXYNOS_SCALER=y
CONFIG_DRM_EXYNOS_GSC=y
CONFIG_DRM_ROCKCHIP=y
CONFIG_ROCKCHIP_VOP=y
CONFIG_ROCKCHIP_VOP2=y
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_ROCKCHIP_LVDS=y
CONFIG_ROCKCHIP_RGB=y
CONFIG_ROCKCHIP_RK3066_HDMI=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_RCAR_DU=y
CONFIG_DRM_RCAR_USE_CMM=y
CONFIG_DRM_RCAR_CMM=y
CONFIG_DRM_RCAR_DW_HDMI=y
CONFIG_DRM_RCAR_USE_LVDS=y
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_RCAR_MIPI_DSI=y
CONFIG_DRM_RCAR_VSP=y
CONFIG_DRM_RCAR_WRITEBACK=y
CONFIG_DRM_SUN4I=y
CONFIG_DRM_SUN4I_HDMI=y
CONFIG_DRM_SUN4I_HDMI_CEC=y
CONFIG_DRM_SUN4I_BACKEND=y
CONFIG_DRM_SUN6I_DSI=y
CONFIG_DRM_SUN8I_DW_HDMI=y
CONFIG_DRM_SUN8I_MIXER=y
CONFIG_DRM_SUN8I_TCON_TOP=y
CONFIG_DRM_QXL=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_MSM=y
CONFIG_DRM_MSM_GPU_STATE=y
CONFIG_DRM_MSM_GPU_SUDO=y
CONFIG_DRM_MSM_MDSS=y
CONFIG_DRM_MSM_MDP4=y
CONFIG_DRM_MSM_MDP5=y
CONFIG_DRM_MSM_DPU=y
CONFIG_DRM_MSM_DP=y
CONFIG_DRM_MSM_DSI=y
CONFIG_DRM_MSM_DSI_28NM_PHY=y
CONFIG_DRM_MSM_DSI_20NM_PHY=y
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
CONFIG_DRM_MSM_DSI_14NM_PHY=y
CONFIG_DRM_MSM_DSI_10NM_PHY=y
CONFIG_DRM_MSM_DSI_7NM_PHY=y
CONFIG_DRM_MSM_HDMI=y
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_TEGRA=y
CONFIG_DRM_TEGRA_DEBUG=y
CONFIG_DRM_TEGRA_STAGING=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ABT_Y030XX067A=y
CONFIG_DRM_PANEL_ARM_VERSATILE=y
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=y
CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0=y
CONFIG_DRM_PANEL_BOE_HIMAX8279D=y
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=y
CONFIG_DRM_PANEL_DSI_CM=y
CONFIG_DRM_PANEL_LVDS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_PANEL_EDP=y
CONFIG_DRM_PANEL_EBBG_FT8719=y
CONFIG_DRM_PANEL_ELIDA_KD35T133=y
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=y
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_IL9322=y
CONFIG_DRM_PANEL_ILITEK_ILI9341=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_EJ030NA=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
CONFIG_DRM_PANEL_JDI_R63452=y
CONFIG_DRM_PANEL_KHADAS_TS050=y
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=y
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=y
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
CONFIG_DRM_PANEL_LG_LB035Q02=y
CONFIG_DRM_PANEL_LG_LG4573=y
CONFIG_DRM_PANEL_NEC_NL8048HL11=y
CONFIG_DRM_PANEL_NEWVISION_NV3052C=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_NOVATEK_NT35950=y
CONFIG_DRM_PANEL_NOVATEK_NT36672A=y
CONFIG_DRM_PANEL_NOVATEK_NT39016=y
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=y
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=y
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=y
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
CONFIG_DRM_PANEL_RONBO_RB070D30=y
CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y
CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_DRM_PANEL_SAMSUNG_SOFEF00=y
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
CONFIG_DRM_PANEL_SHARP_LS060T1SX01=y
CONFIG_DRM_PANEL_SITRONIX_ST7701=y
CONFIG_DRM_PANEL_SITRONIX_ST7703=y
CONFIG_DRM_PANEL_SITRONIX_ST7789V=y
CONFIG_DRM_PANEL_SONY_ACX565AKM=y
CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521=y
CONFIG_DRM_PANEL_TDO_TL070WSH30=y
CONFIG_DRM_PANEL_TPO_TD028TTEC1=y
CONFIG_DRM_PANEL_TPO_TD043MTEA1=y
CONFIG_DRM_PANEL_TPO_TPG110=y
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
CONFIG_DRM_PANEL_VISIONOX_RM69299=y
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
CONFIG_DRM_PANEL_XINPENG_XPP055C272=y
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_CDNS_DSI=y
CONFIG_DRM_CHIPONE_ICN6211=y
CONFIG_DRM_CHRONTEL_CH7033=y
CONFIG_DRM_CROS_EC_ANX7688=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_FSL_LDB=y
CONFIG_DRM_ITE_IT6505=y
CONFIG_DRM_LONTIUM_LT8912B=y
CONFIG_DRM_LONTIUM_LT9211=y
CONFIG_DRM_LONTIUM_LT9611=y
CONFIG_DRM_LONTIUM_LT9611UXC=y
CONFIG_DRM_ITE_IT66121=y
CONFIG_DRM_LVDS_CODEC=y
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=y
CONFIG_DRM_NWL_MIPI_DSI=y
CONFIG_DRM_NXP_PTN3460=y
CONFIG_DRM_PARADE_PS8622=y
CONFIG_DRM_PARADE_PS8640=y
CONFIG_DRM_SIL_SII8620=y
CONFIG_DRM_SII902X=y
CONFIG_DRM_SII9234=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_THINE_THC63LVD1024=y
CONFIG_DRM_TOSHIBA_TC358762=y
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_TOSHIBA_TC358767=y
CONFIG_DRM_TOSHIBA_TC358768=y
CONFIG_DRM_TOSHIBA_TC358775=y
CONFIG_DRM_TI_DLPC3433=y
CONFIG_DRM_TI_TFP410=y
CONFIG_DRM_TI_SN65DSI83=y
CONFIG_DRM_TI_SN65DSI86=y
CONFIG_DRM_TI_TPD12S015=y
CONFIG_DRM_ANALOGIX_ANX6345=y
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_CDNS_MHDP8546=y
CONFIG_DRM_CDNS_MHDP8546_J721E=y
CONFIG_DRM_IMX8QM_LDB=y
CONFIG_DRM_IMX8QXP_LDB=y
CONFIG_DRM_IMX8QXP_PIXEL_COMBINER=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK=y
CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI=y
CONFIG_DRM_DW_HDMI=y
CONFIG_DRM_DW_HDMI_AHB_AUDIO=y
CONFIG_DRM_DW_HDMI_I2S_AUDIO=y
CONFIG_DRM_DW_HDMI_GP_AUDIO=y
CONFIG_DRM_DW_HDMI_CEC=y
CONFIG_DRM_DW_MIPI_DSI=y
# end of Display Interface Bridges

CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
CONFIG_DRM_IMX_DCSS=y
CONFIG_DRM_INGENIC=y
CONFIG_DRM_INGENIC_IPU=y
CONFIG_DRM_V3D=y
CONFIG_DRM_VC4=y
CONFIG_DRM_VC4_HDMI_CEC=y
CONFIG_DRM_ETNAVIV=y
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_HISI_HIBMC=y
CONFIG_DRM_HISI_KIRIN=y
CONFIG_DRM_LOGICVC=y
CONFIG_DRM_MEDIATEK=y
CONFIG_DRM_MEDIATEK_DP=y
CONFIG_DRM_MEDIATEK_HDMI=y
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
CONFIG_DRM_IMX_LCDIF=y
CONFIG_DRM_MESON=y
CONFIG_DRM_MESON_DW_HDMI=y
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_GM12U320=y
CONFIG_DRM_PANEL_MIPI_DBI=y
CONFIG_DRM_SIMPLEDRM=y
CONFIG_TINYDRM_HX8357D=y
CONFIG_TINYDRM_ILI9163=y
CONFIG_TINYDRM_ILI9225=y
CONFIG_TINYDRM_ILI9341=y
CONFIG_TINYDRM_ILI9486=y
CONFIG_TINYDRM_MI0283QT=y
CONFIG_TINYDRM_REPAPER=y
CONFIG_TINYDRM_ST7586=y
CONFIG_TINYDRM_ST7735R=y
CONFIG_DRM_PL111=y
CONFIG_DRM_TVE200=y
CONFIG_DRM_XEN=y
CONFIG_DRM_XEN_FRONTEND=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_PANFROST=y
CONFIG_DRM_ASPEED_GFX=y
CONFIG_DRM_MCDE=y
CONFIG_DRM_TIDSS=y
CONFIG_DRM_ZYNQMP_DPSUB=y
CONFIG_DRM_GUD=y
CONFIG_DRM_SSD130X=y
CONFIG_DRM_SSD130X_I2C=y
CONFIG_DRM_SSD130X_SPI=y
CONFIG_DRM_SPRD=y
CONFIG_DRM_HYPERV=y
CONFIG_DRM_LEGACY=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_MGA=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_LIB_RANDOM=y
CONFIG_DRM_PRIVACY_SCREEN=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_CLPS711X=y
CONFIG_FB_IMX=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
CONFIG_FB_CONTROL=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_UVESA=y
CONFIG_FB_EFI=y
CONFIG_FB_GBE=y
CONFIG_FB_GBE_MEM=4
CONFIG_FB_PVR2=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_ATMEL=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_WM8505=y
CONFIG_FB_WMT_GE_ROPS=y
CONFIG_FB_PXA168=y
CONFIG_FB_W100=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_S3C=y
CONFIG_FB_S3C_DEBUG_REGWRITE=y
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_XILINX=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_DA8XX=y
CONFIG_FB_VIRTUAL=y
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_MX3=y
CONFIG_FB_BROADSHEET=y
CONFIG_FB_HYPERV=y
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
CONFIG_FB_OMAP_LCD_H3=y
CONFIG_FB_OMAP2=y
CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3
CONFIG_FB_OMAP2_DSS_INIT=y
CONFIG_FB_OMAP2_DSS=y
CONFIG_FB_OMAP2_DSS_DEBUG=y
CONFIG_FB_OMAP2_DSS_DEBUGFS=y
CONFIG_FB_OMAP2_DSS_COLLECT_IRQ_STATS=y
CONFIG_FB_OMAP2_DSS_DPI=y
CONFIG_FB_OMAP2_DSS_VENC=y
CONFIG_FB_OMAP2_DSS_HDMI_COMMON=y
CONFIG_FB_OMAP4_DSS_HDMI=y
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y

#
# OMAPFB Panel and Encoder Drivers
#
CONFIG_FB_OMAP2_ENCODER_OPA362=y
CONFIG_FB_OMAP2_ENCODER_TFP410=y
CONFIG_FB_OMAP2_ENCODER_TPD12S015=y
CONFIG_FB_OMAP2_CONNECTOR_DVI=y
CONFIG_FB_OMAP2_CONNECTOR_HDMI=y
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=y
CONFIG_FB_OMAP2_PANEL_DPI=y
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=y
# end of OMAPFB Panel and Encoder Drivers

CONFIG_MMP_DISP=y
CONFIG_MMP_DISP_CONTROLLER=y
CONFIG_MMP_DISP_SPI=y
CONFIG_MMP_PANEL_TPOHVGA=y
CONFIG_MMP_FB=y
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_OMAP1=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_MT6370=y
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_RT4831=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support

CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_CTL_DEBUG=y
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_SERIAL_GENERIC=y
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=y
CONFIG_SND_ALI5451=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_AZT3328=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5535AUDIO=y
CONFIG_SND_CTXFI=y
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=y
CONFIG_SND_INDIGODJX=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1_SEQ=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
CONFIG_SND_ES1968=y
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=y

#
# Don't forget to add built-in firmwares for HDSP driver
#
CONFIG_SND_HDSPM=y
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_LOLA=y
CONFIG_SND_LX6464ES=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_TEGRA=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_SCODEC_CS35L41=y
CONFIG_SND_HDA_CS_DSP_CONTROLS=y
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=y
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CS8409=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
# end of HD-Audio

CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_ALIGNED_MMIO=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_EXT_CORE=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=y
CONFIG_SND_PXA2XX_LIB=y
CONFIG_SND_SPI=y
CONFIG_SND_AT73C213=y
CONFIG_SND_AT73C213_TARGET_BITRATE=48000
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
CONFIG_SND_BEBOB=y
CONFIG_SND_FIREWIRE_DIGI00X=y
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_FIREWIRE_MOTU=y
CONFIG_SND_FIREFACE=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_TOPOLOGY_KUNIT_TEST=y
CONFIG_SND_SOC_UTILS_KUNIT_TEST=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
CONFIG_SND_SOC_AMD_ST_ES8336_MACH=y
CONFIG_SND_AMD_ACP_CONFIG=y
CONFIG_SND_SOC_APPLE_MCA=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_ATMEL_SOC_PDC=y
CONFIG_SND_ATMEL_SOC_DMA=y
CONFIG_SND_ATMEL_SOC_SSC=y
CONFIG_SND_ATMEL_SOC_SSC_PDC=y
CONFIG_SND_ATMEL_SOC_SSC_DMA=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SND_ATMEL_SOC_PDMIC=y
CONFIG_SND_ATMEL_SOC_I2S=y
CONFIG_SND_SOC_MIKROE_PROTO=y
CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_SND_MCHP_SOC_SPDIFTX=y
CONFIG_SND_MCHP_SOC_SPDIFRX=y
CONFIG_SND_MCHP_SOC_PDMC=y
CONFIG_SND_BCM2835_SOC_I2S=y
CONFIG_SND_SOC_CYGNUS=y
CONFIG_SND_BCM63XX_I2S_WHISTLER=y
CONFIG_SND_EP93XX_SOC=y
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=y

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_MQS=y
CONFIG_SND_SOC_FSL_AUDMIX=y
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_EASRC=y
CONFIG_SND_SOC_FSL_XCVR=y
CONFIG_SND_SOC_FSL_AUD2HTX=y
CONFIG_SND_SOC_FSL_UTILS=y
CONFIG_SND_SOC_FSL_RPMSG=y
CONFIG_SND_SOC_IMX_PCM_DMA=y
CONFIG_SND_SOC_IMX_AUDIO_RPMSG=y
CONFIG_SND_SOC_IMX_PCM_RPMSG=y
CONFIG_SND_SOC_IMX_AUDMUX=y
CONFIG_SND_IMX_SOC=y

#
# SoC Audio support for Freescale i.MX boards:
#
CONFIG_SND_SOC_IMX_ES8328=y
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_FSL_ASOC_CARD=y
CONFIG_SND_SOC_IMX_AUDMIX=y
CONFIG_SND_SOC_IMX_HDMI=y
CONFIG_SND_SOC_IMX_RPMSG=y
CONFIG_SND_SOC_IMX_CARD=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_JZ4740_SOC_I2S=y
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=y
CONFIG_SND_SOC_IMG_I2S_OUT=y
CONFIG_SND_SOC_IMG_PARALLEL_OUT=y
CONFIG_SND_SOC_IMG_SPDIF_IN=y
CONFIG_SND_SOC_IMG_SPDIF_OUT=y
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=y
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SKYLAKE=y
CONFIG_SND_SOC_INTEL_SKL=y
CONFIG_SND_SOC_INTEL_APL=y
CONFIG_SND_SOC_INTEL_KBL=y
CONFIG_SND_SOC_INTEL_GLK=y
CONFIG_SND_SOC_INTEL_CNL=y
CONFIG_SND_SOC_INTEL_CFL=y
CONFIG_SND_SOC_INTEL_CML_H=y
CONFIG_SND_SOC_INTEL_CML_LP=y
CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=y
CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=y
CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y
CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=y
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_KEEMBAY=y
CONFIG_SND_SOC_INTEL_AVS=y

#
# Intel AVS Machine drivers
#

#
# Available DSP configurations
#
CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=y
CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=y
CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=y
CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST=y
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=y
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98373=y
CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=y
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=y
CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=y
# end of Intel AVS Machine drivers

CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_HDA_DSP_COMMON=y
CONFIG_SND_SOC_INTEL_SOF_MAXIM_COMMON=y
CONFIG_SND_SOC_INTEL_SOF_REALTEK_COMMON=y
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=y
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=y
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=y
CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=y
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=y
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=y
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=y
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=y
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=y
CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=y
CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=y
CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=y
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=y
CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=y
CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=y
CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=y
CONFIG_SND_SOC_MEDIATEK=y
CONFIG_SND_SOC_MT2701=y
CONFIG_SND_SOC_MT2701_CS42448=y
CONFIG_SND_SOC_MT2701_WM8960=y
CONFIG_SND_SOC_MT6797=y
CONFIG_SND_SOC_MT6797_MT6351=y
CONFIG_SND_SOC_MT8173=y
CONFIG_SND_SOC_MT8173_MAX98090=y
CONFIG_SND_SOC_MT8173_RT5650=y
CONFIG_SND_SOC_MT8173_RT5650_RT5514=y
CONFIG_SND_SOC_MT8173_RT5650_RT5676=y
CONFIG_SND_SOC_MT8183=y
CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=y
CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=y
CONFIG_SND_SOC_MT8186=y
CONFIG_SND_SOC_MT8186_MT6366_DA7219_MAX98357=y
CONFIG_SND_SOC_MT8186_MT6366_RT1019_RT5682S=y
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_MT8192=y
CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=y
CONFIG_SND_SOC_MT8195=y
CONFIG_SND_SOC_MT8195_MT6359=y

#
# ASoC support for Amlogic platforms
#
CONFIG_SND_MESON_AIU=y
CONFIG_SND_MESON_AXG_FIFO=y
CONFIG_SND_MESON_AXG_FRDDR=y
CONFIG_SND_MESON_AXG_TODDR=y
CONFIG_SND_MESON_AXG_TDM_FORMATTER=y
CONFIG_SND_MESON_AXG_TDM_INTERFACE=y
CONFIG_SND_MESON_AXG_TDMIN=y
CONFIG_SND_MESON_AXG_TDMOUT=y
CONFIG_SND_MESON_AXG_SOUND_CARD=y
CONFIG_SND_MESON_AXG_SPDIFOUT=y
CONFIG_SND_MESON_AXG_SPDIFIN=y
CONFIG_SND_MESON_AXG_PDM=y
CONFIG_SND_MESON_CARD_UTILS=y
CONFIG_SND_MESON_CODEC_GLUE=y
CONFIG_SND_MESON_GX_SOUND_CARD=y
CONFIG_SND_MESON_G12A_TOACODEC=y
CONFIG_SND_MESON_G12A_TOHDMITX=y
CONFIG_SND_SOC_MESON_T9015=y
# end of ASoC support for Amlogic platforms

CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_SND_PXA2XX_SOC=y
CONFIG_SND_SOC_QCOM=y
CONFIG_SND_SOC_LPASS_CPU=y
CONFIG_SND_SOC_LPASS_HDMI=y
CONFIG_SND_SOC_LPASS_PLATFORM=y
CONFIG_SND_SOC_LPASS_CDC_DMA=y
CONFIG_SND_SOC_LPASS_IPQ806X=y
CONFIG_SND_SOC_LPASS_APQ8016=y
CONFIG_SND_SOC_LPASS_SC7180=y
CONFIG_SND_SOC_LPASS_SC7280=y
CONFIG_SND_SOC_STORM=y
CONFIG_SND_SOC_APQ8016_SBC=y
CONFIG_SND_SOC_QCOM_COMMON=y
CONFIG_SND_SOC_QDSP6_COMMON=y
CONFIG_SND_SOC_QDSP6_CORE=y
CONFIG_SND_SOC_QDSP6_AFE=y
CONFIG_SND_SOC_QDSP6_AFE_DAI=y
CONFIG_SND_SOC_QDSP6_AFE_CLOCKS=y
CONFIG_SND_SOC_QDSP6_ADM=y
CONFIG_SND_SOC_QDSP6_ROUTING=y
CONFIG_SND_SOC_QDSP6_ASM=y
CONFIG_SND_SOC_QDSP6_ASM_DAI=y
CONFIG_SND_SOC_QDSP6_APM_DAI=y
CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI=y
CONFIG_SND_SOC_QDSP6_APM=y
CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS=y
CONFIG_SND_SOC_QDSP6_PRM=y
CONFIG_SND_SOC_QDSP6=y
CONFIG_SND_SOC_MSM8996=y
CONFIG_SND_SOC_SDM845=y
CONFIG_SND_SOC_SM8250=y
CONFIG_SND_SOC_SC8280XP=y
CONFIG_SND_SOC_SC7180=y
CONFIG_SND_SOC_SC7280=y
CONFIG_SND_SOC_ROCKCHIP=y
CONFIG_SND_SOC_ROCKCHIP_I2S=y
CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=y
CONFIG_SND_SOC_ROCKCHIP_PDM=y
CONFIG_SND_SOC_ROCKCHIP_SPDIF=y
CONFIG_SND_SOC_ROCKCHIP_MAX98090=y
CONFIG_SND_SOC_ROCKCHIP_RT5645=y
CONFIG_SND_SOC_RK3288_HDMI_ANALOG=y
CONFIG_SND_SOC_RK3399_GRU_SOUND=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_S3C24XX_I2S=y
CONFIG_SND_SAMSUNG_PCM=y
CONFIG_SND_SAMSUNG_SPDIF=y
CONFIG_SND_SAMSUNG_I2S=y
CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580=y
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23=y
CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES=y
CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380=y
CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380=y
CONFIG_SND_SOC_SMARTQ=y
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=y
CONFIG_SND_SOC_SMDK_WM8994_PCM=y
CONFIG_SND_SOC_SPEYSIDE=y
CONFIG_SND_SOC_TOBERMORY=y
CONFIG_SND_SOC_BELLS=y
CONFIG_SND_SOC_LOWLAND=y
CONFIG_SND_SOC_LITTLEMILL=y
CONFIG_SND_SOC_SNOW=y
CONFIG_SND_SOC_ODROID=y
CONFIG_SND_SOC_ARNDALE=y
CONFIG_SND_SOC_SAMSUNG_TM2_WM5110=y
CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994=y
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=y

#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_RZ=y
# end of SoC Audio support for Renesas SoCs

CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=y
CONFIG_SND_SOC_SOF_PCI=y
CONFIG_SND_SOC_SOF_ACPI=y
CONFIG_SND_SOC_SOF_ACPI_DEV=y
CONFIG_SND_SOC_SOF_OF=y
CONFIG_SND_SOC_SOF_OF_DEV=y
CONFIG_SND_SOC_SOF_COMPRESS=y
CONFIG_SND_SOC_SOF_DEBUG_PROBES=y
CONFIG_SND_SOC_SOF_CLIENT=y
CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT=y
CONFIG_SND_SOC_SOF_FORCE_PROBE_WORKQUEUE=y
CONFIG_SND_SOC_SOF_NOCODEC=y
CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT=y
CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS=y
CONFIG_SND_SOC_SOF_DEBUG=y
CONFIG_SND_SOC_SOF_FORCE_NOCODEC_MODE=y
CONFIG_SND_SOC_SOF_DEBUG_XRUN_STOP=y
CONFIG_SND_SOC_SOF_DEBUG_VERBOSE_IPC=y
CONFIG_SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST=y
CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_NUM=2
CONFIG_SND_SOC_SOF_DEBUG_IPC_MSG_INJECTOR=y
CONFIG_SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT=y
CONFIG_SND_SOC_SOF=y
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_INTEL_IPC4=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=y
CONFIG_SND_SOC_SOF_AMD_COMMON=y
CONFIG_SND_SOC_SOF_AMD_RENOIR=y
CONFIG_SND_SOC_SOF_AMD_REMBRANDT=y
CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
CONFIG_SND_SOC_SOF_IMX_COMMON=y
CONFIG_SND_SOC_SOF_IMX8=y
CONFIG_SND_SOC_SOF_IMX8M=y
CONFIG_SND_SOC_SOF_IMX8ULP=y
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=y
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=y
CONFIG_SND_SOC_SOF_BAYTRAIL=y
CONFIG_SND_SOC_SOF_BROADWELL=y
CONFIG_SND_SOC_SOF_MERRIFIELD=y
CONFIG_SND_SOC_SOF_INTEL_SKL=y
CONFIG_SND_SOC_SOF_SKYLAKE=y
CONFIG_SND_SOC_SOF_KABYLAKE=y
CONFIG_SND_SOC_SOF_INTEL_APL=y
CONFIG_SND_SOC_SOF_APOLLOLAKE=y
CONFIG_SND_SOC_SOF_GEMINILAKE=y
CONFIG_SND_SOC_SOF_INTEL_CNL=y
CONFIG_SND_SOC_SOF_CANNONLAKE=y
CONFIG_SND_SOC_SOF_COFFEELAKE=y
CONFIG_SND_SOC_SOF_COMETLAKE=y
CONFIG_SND_SOC_SOF_INTEL_ICL=y
CONFIG_SND_SOC_SOF_ICELAKE=y
CONFIG_SND_SOC_SOF_JASPERLAKE=y
CONFIG_SND_SOC_SOF_INTEL_TGL=y
CONFIG_SND_SOC_SOF_TIGERLAKE=y
CONFIG_SND_SOC_SOF_ELKHARTLAKE=y
CONFIG_SND_SOC_SOF_ALDERLAKE=y
CONFIG_SND_SOC_SOF_INTEL_MTL=y
CONFIG_SND_SOC_SOF_METEORLAKE=y
CONFIG_SND_SOC_SOF_HDA_COMMON=y
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_HDA_PROBES=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=y
CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
CONFIG_SND_SOC_SOF_MTK_COMMON=y
CONFIG_SND_SOC_SOF_MT8186=y
CONFIG_SND_SOC_SOF_MT8195=y
CONFIG_SND_SOC_SOF_XTENSA=y
CONFIG_SND_SOC_SPRD=y
CONFIG_SND_SOC_SPRD_MCDT=y
CONFIG_SND_SOC_STI=y

#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_STM32_SAI=y
CONFIG_SND_SOC_STM32_I2S=y
CONFIG_SND_SOC_STM32_SPDIFRX=y
CONFIG_SND_SOC_STM32_DFSDM=y
# end of STMicroelectronics STM32 SOC audio support

#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=y
CONFIG_SND_SUN8I_CODEC=y
CONFIG_SND_SUN8I_CODEC_ANALOG=y
CONFIG_SND_SUN50I_CODEC_ANALOG=y
CONFIG_SND_SUN4I_I2S=y
CONFIG_SND_SUN4I_SPDIF=y
CONFIG_SND_SUN50I_DMIC=y
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=y
# end of Allwinner SoC Audio support

CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA20_AC97=y
CONFIG_SND_SOC_TEGRA20_DAS=y
CONFIG_SND_SOC_TEGRA20_I2S=y
CONFIG_SND_SOC_TEGRA20_SPDIF=y
CONFIG_SND_SOC_TEGRA30_AHUB=y
CONFIG_SND_SOC_TEGRA30_I2S=y
CONFIG_SND_SOC_TEGRA210_AHUB=y
CONFIG_SND_SOC_TEGRA210_DMIC=y
CONFIG_SND_SOC_TEGRA210_I2S=y
CONFIG_SND_SOC_TEGRA210_OPE=y
CONFIG_SND_SOC_TEGRA186_ASRC=y
CONFIG_SND_SOC_TEGRA186_DSPK=y
CONFIG_SND_SOC_TEGRA210_ADMAIF=y
CONFIG_SND_SOC_TEGRA210_MVC=y
CONFIG_SND_SOC_TEGRA210_SFC=y
CONFIG_SND_SOC_TEGRA210_AMX=y
CONFIG_SND_SOC_TEGRA210_ADX=y
CONFIG_SND_SOC_TEGRA210_MIXER=y
CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=y
CONFIG_SND_SOC_TEGRA_MACHINE_DRV=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_WM9712=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
CONFIG_SND_SOC_TEGRA_RT5677=y
CONFIG_SND_SOC_TEGRA_SGTL5000=y

#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=y
CONFIG_SND_SOC_TI_SDMA_PCM=y
CONFIG_SND_SOC_TI_UDMA_PCM=y

#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_ASP=y
CONFIG_SND_SOC_DAVINCI_MCASP=y
CONFIG_SND_SOC_DAVINCI_VCIF=y
CONFIG_SND_SOC_OMAP_DMIC=y
CONFIG_SND_SOC_OMAP_MCBSP=y
CONFIG_SND_SOC_OMAP_MCPDM=y

#
# Audio support for boards with Texas Instruments SoCs
#
CONFIG_SND_SOC_OMAP3_TWL4030=y
CONFIG_SND_SOC_OMAP_ABE_TWL6040=y
CONFIG_SND_SOC_OMAP_HDMI=y
CONFIG_SND_SOC_J721E_EVM=y
# end of Audio support for Texas Instruments SoCs

CONFIG_SND_SOC_UNIPHIER=y
CONFIG_SND_SOC_UNIPHIER_AIO=y
CONFIG_SND_SOC_UNIPHIER_LD11=y
CONFIG_SND_SOC_UNIPHIER_PXS2=y
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=y
CONFIG_SND_SOC_XILINX_I2S=y
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
CONFIG_SND_SOC_ALL_CODECS=y
CONFIG_SND_SOC_88PM860X=y
CONFIG_SND_SOC_ARIZONA=y
CONFIG_SND_SOC_WM_HUBS=y
CONFIG_SND_SOC_WM_ADSP=y
CONFIG_SND_SOC_AB8500_CODEC=y
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_AD1836=y
CONFIG_SND_SOC_AD193X=y
CONFIG_SND_SOC_AD193X_SPI=y
CONFIG_SND_SOC_AD193X_I2C=y
CONFIG_SND_SOC_AD1980=y
CONFIG_SND_SOC_AD73311=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1372=y
CONFIG_SND_SOC_ADAU1372_I2C=y
CONFIG_SND_SOC_ADAU1372_SPI=y
CONFIG_SND_SOC_ADAU1373=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU1761_SPI=y
CONFIG_SND_SOC_ADAU1781=y
CONFIG_SND_SOC_ADAU1781_I2C=y
CONFIG_SND_SOC_ADAU1781_SPI=y
CONFIG_SND_SOC_ADAU1977=y
CONFIG_SND_SOC_ADAU1977_SPI=y
CONFIG_SND_SOC_ADAU1977_I2C=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
CONFIG_SND_SOC_ADAV80X=y
CONFIG_SND_SOC_ADAV801=y
CONFIG_SND_SOC_ADAV803=y
CONFIG_SND_SOC_ADS117X=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4118=y
CONFIG_SND_SOC_AK4375=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4535=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4641=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK4671=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_ALC5632=y
CONFIG_SND_SOC_AW8738=y
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CPCAP=y
CONFIG_SND_SOC_CQ0093VC=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
CONFIG_SND_SOC_CS35L32=y
CONFIG_SND_SOC_CS35L33=y
CONFIG_SND_SOC_CS35L34=y
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
CONFIG_SND_SOC_CS35L41_LIB=y
CONFIG_SND_SOC_CS35L41=y
CONFIG_SND_SOC_CS35L41_SPI=y
CONFIG_SND_SOC_CS35L41_I2C=y
CONFIG_SND_SOC_CS35L45_TABLES=y
CONFIG_SND_SOC_CS35L45=y
CONFIG_SND_SOC_CS35L45_SPI=y
CONFIG_SND_SOC_CS35L45_I2C=y
CONFIG_SND_SOC_CS42L42_CORE=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS42L83=y
CONFIG_SND_SOC_CS4234=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS4271_SPI=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS47L15=y
CONFIG_SND_SOC_CS47L24=y
CONFIG_SND_SOC_CS47L35=y
CONFIG_SND_SOC_CS47L85=y
CONFIG_SND_SOC_CS47L90=y
CONFIG_SND_SOC_CS47L92=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX20442=y
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_JZ4740_CODEC=y
CONFIG_SND_SOC_JZ4725B_CODEC=y
CONFIG_SND_SOC_JZ4760_CODEC=y
CONFIG_SND_SOC_JZ4770_CODEC=y
CONFIG_SND_SOC_L3=y
CONFIG_SND_SOC_DA7210=y
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DA7218=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DA732X=y
CONFIG_SND_SOC_DA9055=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
CONFIG_SND_SOC_ES8326=y
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_ES8328_SPI=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_HDAC_HDMI=y
CONFIG_SND_SOC_HDAC_HDA=y
CONFIG_SND_SOC_HDA=y
CONFIG_SND_SOC_ICS43432=y
CONFIG_SND_SOC_INNO_RK3036=y
CONFIG_SND_SOC_ISABELLE=y
CONFIG_SND_SOC_LM49453=y
CONFIG_SND_SOC_LOCHNAGAR_SC=y
CONFIG_SND_SOC_MADERA=y
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_MAX98095=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98371=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98925=y
CONFIG_SND_SOC_MAX98926=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98520=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
CONFIG_SND_SOC_MAX98396=y
CONFIG_SND_SOC_MAX9850=y
CONFIG_SND_SOC_MAX9860=y
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=y
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM186X_SPI=y
CONFIG_SND_SOC_PCM3008=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
CONFIG_SND_SOC_PCM3060_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM5102A=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_PCM512x_SPI=y
CONFIG_SND_SOC_RK3328=y
CONFIG_SND_SOC_RK817=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RL6347A=y
CONFIG_SND_SOC_RT274=y
CONFIG_SND_SOC_RT286=y
CONFIG_SND_SOC_RT298=y
CONFIG_SND_SOC_RT1011=y
CONFIG_SND_SOC_RT1015=y
CONFIG_SND_SOC_RT1015P=y
CONFIG_SND_SOC_RT1016=y
CONFIG_SND_SOC_RT1019=y
CONFIG_SND_SOC_RT1305=y
CONFIG_SND_SOC_RT1308=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT1316_SDW=y
CONFIG_SND_SOC_RT5514=y
CONFIG_SND_SOC_RT5514_SPI=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
CONFIG_SND_SOC_RT5645=y
CONFIG_SND_SOC_RT5651=y
CONFIG_SND_SOC_RT5659=y
CONFIG_SND_SOC_RT5660=y
CONFIG_SND_SOC_RT5663=y
CONFIG_SND_SOC_RT5665=y
CONFIG_SND_SOC_RT5668=y
CONFIG_SND_SOC_RT5670=y
CONFIG_SND_SOC_RT5677=y
CONFIG_SND_SOC_RT5677_SPI=y
CONFIG_SND_SOC_RT5682=y
CONFIG_SND_SOC_RT5682_I2C=y
CONFIG_SND_SOC_RT5682_SDW=y
CONFIG_SND_SOC_RT5682S=y
CONFIG_SND_SOC_RT700=y
CONFIG_SND_SOC_RT700_SDW=y
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
CONFIG_SND_SOC_RT711_SDCA_SDW=y
CONFIG_SND_SOC_RT715=y
CONFIG_SND_SOC_RT715_SDW=y
CONFIG_SND_SOC_RT715_SDCA_SDW=y
CONFIG_SND_SOC_RT9120=y
CONFIG_SND_SOC_SDW_MOCKUP=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SI476X=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIMPLE_MUX=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SRC4XXX_I2C=y
CONFIG_SND_SOC_SRC4XXX=y
CONFIG_SND_SOC_SSM2305=y
CONFIG_SND_SOC_SSM2518=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STA529=y
CONFIG_SND_SOC_STAC9766=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2764=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS2780=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
CONFIG_SND_SOC_TAS5720=y
CONFIG_SND_SOC_TAS5805M=y
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TFA989X=y
CONFIG_SND_SOC_TLV320ADC3XXX=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC26=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
CONFIG_SND_SOC_TLV320AIC32X4_SPI=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TLV320AIC3X_I2C=y
CONFIG_SND_SOC_TLV320AIC3X_SPI=y
CONFIG_SND_SOC_TLV320DAC33=y
CONFIG_SND_SOC_TLV320ADCX140=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_TWL4030=y
CONFIG_SND_SOC_TWL6040=y
CONFIG_SND_SOC_UDA1334=y
CONFIG_SND_SOC_UDA134X=y
CONFIG_SND_SOC_UDA1380=y
CONFIG_SND_SOC_WCD9335=y
CONFIG_SND_SOC_WCD_MBHC=y
CONFIG_SND_SOC_WCD934X=y
CONFIG_SND_SOC_WCD938X=y
CONFIG_SND_SOC_WCD938X_SDW=y
CONFIG_SND_SOC_WL1273=y
CONFIG_SND_SOC_WM0010=y
CONFIG_SND_SOC_WM1250_EV1=y
CONFIG_SND_SOC_WM2000=y
CONFIG_SND_SOC_WM2200=y
CONFIG_SND_SOC_WM5100=y
CONFIG_SND_SOC_WM5102=y
CONFIG_SND_SOC_WM5110=y
CONFIG_SND_SOC_WM8350=y
CONFIG_SND_SOC_WM8400=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8727=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8731_I2C=y
CONFIG_SND_SOC_WM8731_SPI=y
CONFIG_SND_SOC_WM8737=y
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8770=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8804_SPI=y
CONFIG_SND_SOC_WM8900=y
CONFIG_SND_SOC_WM8903=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SOC_WM8940=y
CONFIG_SND_SOC_WM8955=y
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8961=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8971=y
CONFIG_SND_SOC_WM8974=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SOC_WM8983=y
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_WM8988=y
CONFIG_SND_SOC_WM8990=y
CONFIG_SND_SOC_WM8991=y
CONFIG_SND_SOC_WM8993=y
CONFIG_SND_SOC_WM8994=y
CONFIG_SND_SOC_WM8995=y
CONFIG_SND_SOC_WM8996=y
CONFIG_SND_SOC_WM8997=y
CONFIG_SND_SOC_WM8998=y
CONFIG_SND_SOC_WM9081=y
CONFIG_SND_SOC_WM9090=y
CONFIG_SND_SOC_WM9705=y
CONFIG_SND_SOC_WM9712=y
CONFIG_SND_SOC_WM9713=y
CONFIG_SND_SOC_WSA881X=y
CONFIG_SND_SOC_WSA883X=y
CONFIG_SND_SOC_ZL38060=y
CONFIG_SND_SOC_LM4857=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MAX9768=y
CONFIG_SND_SOC_MAX9877=y
CONFIG_SND_SOC_MC13783=y
CONFIG_SND_SOC_ML26124=y
CONFIG_SND_SOC_MT6351=y
CONFIG_SND_SOC_MT6358=y
CONFIG_SND_SOC_MT6359=y
CONFIG_SND_SOC_MT6359_ACCDET=y
CONFIG_SND_SOC_MT6660=y
CONFIG_SND_SOC_NAU8315=y
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8821=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
CONFIG_SND_SOC_NAU8825=y
CONFIG_SND_SOC_TPA6130A2=y
CONFIG_SND_SOC_LPASS_MACRO_COMMON=y
CONFIG_SND_SOC_LPASS_WSA_MACRO=y
CONFIG_SND_SOC_LPASS_VA_MACRO=y
CONFIG_SND_SOC_LPASS_RX_MACRO=y
CONFIG_SND_SOC_LPASS_TX_MACRO=y
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD2=y
CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE=y
CONFIG_SND_TEST_COMPONENT=y
CONFIG_SND_SYNTH_EMUX=y
CONFIG_SND_XEN_FRONTEND=y
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BETOP_FF=y
CONFIG_HID_BIGBEN_FF=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CP2112=y
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_FT260=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_VIVALDI_COMMON=y
CONFIG_HID_GOOGLE_HAMMER=y
CONFIG_HID_VIVALDI=y
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
CONFIG_HID_VRC2=y
CONFIG_HID_XIAOMI=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LETSKETCH=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MEGAWORLD_FF=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NINTENDO=y
CONFIG_NINTENDO_FF=y
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=y
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=y
CONFIG_HID_RAZER=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SEMITEK=y
CONFIG_HID_SIGMAMICRO=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_TOPRE=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
CONFIG_HID_MCP2221=y
CONFIG_HID_KUNIT_TEST=y
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID_ACPI=y
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
CONFIG_I2C_HID_OF_GOODIX=y
# end of I2C HID support

CONFIG_I2C_HID_CORE=y

#
# Intel ISH HID support
#
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=y
# end of AMD SFH HID Support

#
# Surface System Aggregator Module HID support
#
CONFIG_SURFACE_HID=y
CONFIG_SURFACE_KBD=y
# end of Surface System Aggregator Module HID support

CONFIG_SURFACE_HID_CORE=y
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_FEW_INIT_RETRIES=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_XHCI_HISTB=y
CONFIG_USB_XHCI_MTK=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_XHCI_TEGRA=y
CONFIG_USB_EHCI_BRCMSTB=y
CONFIG_USB_BRCMSTB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_NPCM7XX=y
CONFIG_USB_EHCI_HCD_OMAP=y
CONFIG_USB_EHCI_HCD_ORION=y
CONFIG_USB_EHCI_HCD_SPEAR=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_AT91=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_SH=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_MV=y
CONFIG_USB_CNS3XXX_EHCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SPEAR=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_S3C2410=y
CONFIG_USB_OHCI_HCD_LPC32XX=y
CONFIG_USB_OHCI_HCD_AT91=y
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_OHCI_HCD_DAVINCI=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_SH=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_CNS3XXX_OHCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_XEN_HCD=y
CONFIG_USB_RENESAS_USBHS=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=y
CONFIG_USBIP_VUDC=y
CONFIG_USBIP_DEBUG=y
CONFIG_USB_CDNS_SUPPORT=y
CONFIG_USB_CDNS_HOST=y
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_PCI_WRAP=y
CONFIG_USB_CDNS3_TI=y
CONFIG_USB_CDNS3_IMX=y
CONFIG_USB_CDNSP_PCI=y
CONFIG_USB_CDNSP_GADGET=y
CONFIG_USB_CDNSP_HOST=y
CONFIG_USB_MTU3=y
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
CONFIG_USB_MTU3_DEBUG=y
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_MUSB_TUSB6010=y
CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_MUSB_UX500=y
CONFIG_USB_MUSB_MEDIATEK=y
CONFIG_USB_MUSB_POLARFIRE_SOC=y

#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_PCI=y
CONFIG_USB_DWC3_HAPS=y
CONFIG_USB_DWC3_KEYSTONE=y
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3_ST=y
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_XILINX=y
CONFIG_USB_DWC3_AM62=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2_PCI=y
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_DWC2_DEBUG_PERIODIC=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_CHIPIDEA_TEGRA=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
CONFIG_USB_SERIAL_XR=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_QCOM_EUD=y
CONFIG_APPLE_MFI_FASTCHARGE=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y
CONFIG_BRCM_USB_PINMAP=y
CONFIG_USB_ONBOARD_HUB=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MV_OTG=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_JZ4770_PHY=y
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_LPC32XX=y
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_USB_RENESAS_USB3=y
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
CONFIG_USB_AMD5536UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=y
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=y
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_MAX3420_UDC=y
CONFIG_USB_TEGRA_XUDC=y
CONFIG_USB_ASPEED_UDC=y
CONFIG_USB_ASPEED_VHUB=y
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller

CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_SERIAL=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_NCM=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_PHONET=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_SUBSET=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_MASS_STORAGE=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UAC1_LEGACY=y
CONFIG_USB_F_UAC2=y
CONFIG_USB_F_UVC=y
CONFIG_USB_F_MIDI=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_F_TCM=y
CONFIG_USB_CONFIGFS=y
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y

#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=y
CONFIG_USB_ZERO_HNPTEST=y
CONFIG_USB_AUDIO=y
CONFIG_GADGET_UAC1=y
CONFIG_GADGET_UAC1_LEGACY=y
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=y
CONFIG_USB_GADGETFS=y
CONFIG_USB_FUNCTIONFS=y
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=y
CONFIG_USB_GADGET_TARGET=y
CONFIG_USB_G_SERIAL=y
CONFIG_USB_MIDI_GADGET=y
CONFIG_USB_G_PRINTER=y
CONFIG_USB_CDC_COMPOSITE=y
CONFIG_USB_G_NOKIA=y
CONFIG_USB_G_ACM_MS=y
CONFIG_USB_G_MULTI=y
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=y
CONFIG_USB_G_DBGP=y
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=y
CONFIG_USB_RAW_GADGET=y
# end of USB Gadget precomposed configurations

CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_RT1711H=y
CONFIG_TYPEC_MT6360=y
CONFIG_TYPEC_TCPCI_MT6370=y
CONFIG_TYPEC_TCPCI_MAXIM=y
CONFIG_TYPEC_FUSB302=y
CONFIG_TYPEC_UCSI=y
CONFIG_UCSI_CCG=y
CONFIG_UCSI_ACPI=y
CONFIG_UCSI_STM32G0=y
CONFIG_TYPEC_TPS6598X=y
CONFIG_TYPEC_ANX7411=y
CONFIG_TYPEC_RT1719=y
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_STUSB160X=y
CONFIG_TYPEC_QCOM_PMIC=y
CONFIG_TYPEC_WUSB3801=y

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_FSA4480=y
CONFIG_TYPEC_MUX_PI3USB30532=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers

CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
CONFIG_MMC_CRYPTO=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_DEBUG=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_STM32_SDMMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_ASPEED=y
CONFIG_MMC_SDHCI_OF_ASPEED_TEST=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_OF_SPARX5=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_CNS3XXX=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_PXAV2=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_SDHCI_MILBEAUT=y
CONFIG_MMC_SDHCI_IPROC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MMC_MESON_MX_SDHC=y
CONFIG_MMC_MESON_MX_SDIO=y
CONFIG_MMC_MOXART=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_ALCOR=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_MXC=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_DAVINCI=y
CONFIG_MMC_SPI=y
CONFIG_MMC_S3C=y
CONFIG_MMC_S3C_HW_SDIO_IRQ=y
CONFIG_MMC_S3C_PIO=y
# CONFIG_MMC_S3C_DMA is not set
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_SDHCI_SPRD=y
CONFIG_MMC_TMIO_CORE=y
CONFIG_MMC_TMIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SDHI_SYS_DMAC=y
CONFIG_MMC_SDHI_INTERNAL_DMAC=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_CAVIUM_THUNDERX=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_BLUEFIELD=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_HI3798CV200=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_PCI=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_PCI=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_TOSHIBA_PCI=y
CONFIG_MMC_BCM2835=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_BRCMSTB=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_OMAP=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_OWL=y
CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
CONFIG_MMC_LITEX=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HPB=y
CONFIG_SCSI_UFS_FAULT_INJECTION=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFS_DWC_TC_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_CDNS_PLATFORM=y
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=y
CONFIG_SCSI_UFS_QCOM=y
CONFIG_SCSI_UFS_MEDIATEK=y
CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_RENESAS=y
CONFIG_SCSI_UFS_TI_J721E=y
CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_CLASS_MULTICOLOR=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_AN30259A=y
CONFIG_LEDS_ARIEL=y
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_CPCAP=y
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
CONFIG_LEDS_TURRIS_OMNIA=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_S3C24XX=y
CONFIG_LEDS_COBALT_QUBE=y
CONFIG_LEDS_COBALT_RAQ=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP50XX=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_ASIC3=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX77650=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_OT200=y
CONFIG_LEDS_MENF21BMC=y
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y
CONFIG_LEDS_SC27XX_BLTC=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_PM8058=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
CONFIG_LEDS_TPS6105X=y
CONFIG_LEDS_IP30=y
CONFIG_LEDS_ACER_A500=y
CONFIG_LEDS_BCM63138=y
CONFIG_LEDS_LGM=y

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MT6360=y
CONFIG_LEDS_RT4505=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_SGM3140=y

#
# RGB LED drivers
#
CONFIG_LEDS_PWM_MULTICOLOR=y
CONFIG_LEDS_QCOM_LPG=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SERIALIO=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_ACNTPC=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=y
CONFIG_SPEAKUP_SYNTH_KEYPC=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
# end of Speakup console speech

CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_BNXT_RE=y
CONFIG_INFINIBAND_CXGB4=y
CONFIG_INFINIBAND_EFA=y
CONFIG_INFINIBAND_ERDMA=y
CONFIG_INFINIBAND_HNS=y
CONFIG_INFINIBAND_HNS_HIP08=y
CONFIG_INFINIBAND_IRDMA=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_MLX5_INFINIBAND=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=y
CONFIG_INFINIBAND_QEDR=y
CONFIG_INFINIBAND_VMWARE_PVRDMA=y
CONFIG_RDMA_RXE=y
CONFIG_RDMA_SIW=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_SRPT=y
CONFIG_INFINIBAND_ISER=y
CONFIG_INFINIBAND_ISERT=y
CONFIG_INFINIBAND_RTRS=y
CONFIG_INFINIBAND_RTRS_CLIENT=y
CONFIG_INFINIBAND_RTRS_SERVER=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AL_MC=y
CONFIG_EDAC_LAYERSCAPE=y
CONFIG_EDAC_THUNDERX=y
CONFIG_EDAC_ALTERA=y
CONFIG_EDAC_ALTERA_SDRAM=y
CONFIG_EDAC_ALTERA_OCRAM=y
CONFIG_EDAC_ALTERA_ETHERNET=y
CONFIG_EDAC_ALTERA_NAND=y
CONFIG_EDAC_ALTERA_DMA=y
CONFIG_EDAC_ALTERA_USB=y
CONFIG_EDAC_ALTERA_QSPI=y
CONFIG_EDAC_ALTERA_SDMMC=y
CONFIG_EDAC_SYNOPSYS=y
CONFIG_EDAC_XGENE=y
CONFIG_EDAC_QCOM=y
CONFIG_EDAC_BLUEFIELD=y
CONFIG_EDAC_DMC520=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
CONFIG_RTC_LIB_KUNIT_TEST=y
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_AC100=y
CONFIG_RTC_DRV_BRCMSTB=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_NCT3018Y=y
CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BD70528=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_RC5T619=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
CONFIG_RTC_DRV_RV3032=y
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_GAMECUBE=y
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=y
CONFIG_RTC_DRV_PCF50633=y
CONFIG_RTC_DRV_OPTEE=y
CONFIG_RTC_DRV_ZYNQMP=y
CONFIG_RTC_DRV_CROS_EC=y
CONFIG_RTC_DRV_NTXEC=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=y
CONFIG_RTC_DRV_DAVINCI=y
CONFIG_RTC_DRV_DIGICOLOR=y
CONFIG_RTC_DRV_IMXDI=y
CONFIG_RTC_DRV_FSL_FTM_ALARM=y
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_EP93XX=y
CONFIG_RTC_DRV_SH=y
CONFIG_RTC_DRV_PL030=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_RTC_DRV_RZN1=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_STMP=y
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_RTC_DRV_LPC24XX=y
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_RTC_DRV_PM8XXX=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_MXC_V2=y
CONFIG_RTC_DRV_SNVS=y
CONFIG_RTC_DRV_IMX_SC=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_RTC_DRV_MT2712=y
CONFIG_RTC_DRV_MT6397=y
CONFIG_RTC_DRV_MT7622=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_R7301=y
CONFIG_RTC_DRV_STM32=y
CONFIG_RTC_DRV_CPCAP=y
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=y
CONFIG_RTC_DRV_TI_K3=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_WILCO_EC=y
CONFIG_RTC_DRV_MSC313=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_AMBA_PL08X=y
CONFIG_APPLE_ADMAC=y
CONFIG_AXI_DMAC=y
CONFIG_BCM_SBA_RAID=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_JZ4780=y
CONFIG_DMA_SA11X0=y
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=y
CONFIG_EP93XX_DMA=y
CONFIG_FSL_EDMA=y
CONFIG_FSL_QDMA=y
CONFIG_HISI_DMA=y
CONFIG_IMG_MDC_DMA=y
CONFIG_IMX_DMA=y
CONFIG_IMX_SDMA=y
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IOP_ADMA=y
CONFIG_K3_DMA=y
CONFIG_LPC18XX_DMAMUX=y
CONFIG_MCF_EDMA=y
CONFIG_MILBEAUT_HDMAC=y
CONFIG_MILBEAUT_XDMAC=y
CONFIG_MMP_PDMA=y
CONFIG_MMP_TDMA=y
CONFIG_MV_XOR=y
CONFIG_MV_XOR_V2=y
CONFIG_MXS_DMA=y
CONFIG_MX3_IPU=y
CONFIG_MX3_IPU_IRQS=4
CONFIG_NBPFAXI_DMA=y
CONFIG_OWL_DMA=y
CONFIG_PCH_DMA=y
CONFIG_PL330_DMA=y
CONFIG_PLX_DMA=y
CONFIG_STM32_DMA=y
CONFIG_STM32_DMAMUX=y
CONFIG_STM32_MDMA=y
CONFIG_SPRD_DMA=y
CONFIG_S3C24XX_DMAC=y
CONFIG_TEGRA186_GPC_DMA=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA210_ADMA=y
CONFIG_TIMB_DMA=y
CONFIG_UNIPHIER_MDMAC=y
CONFIG_UNIPHIER_XDMAC=y
CONFIG_XGENE_DMA=y
CONFIG_XILINX_DMA=y
CONFIG_XILINX_ZYNQMP_DMA=y
CONFIG_XILINX_ZYNQMP_DPDMA=y
CONFIG_MTK_HSDMA=y
CONFIG_MTK_CQDMA=y
CONFIG_MTK_UART_APDMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_GPI_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_RZN1_DMAMUX=y
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=y
CONFIG_DW_EDMA_PCIE=y
CONFIG_HSU_DMA=y
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
CONFIG_SH_DMAE=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=y
CONFIG_RZ_DMAC=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_K3_UDMA=y
CONFIG_TI_K3_UDMA_GLUE_LAYER=y
CONFIG_TI_K3_PSIL=y
CONFIG_TI_DMA_CROSSBAR=y
CONFIG_FSL_DPAA2_QDMA=y
CONFIG_INTEL_LDMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
CONFIG_DMABUF_MOVE_NOTIFY=y
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=y
CONFIG_LINEDISP=y
CONFIG_HD44780_COMMON=y
CONFIG_HD44780=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_LCD2S=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
CONFIG_UIO_HV_GENERIC=y
CONFIG_UIO_DFL=y
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_MLX5_VFIO_PCI=y
CONFIG_HISI_ACC_VFIO_PCI=y
CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_AMBA=y
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=y
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=y
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=y
CONFIG_VFIO_MDEV=y
CONFIG_VFIO_FSL_MC=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
CONFIG_NITRO_ENCLAVES=y
CONFIG_NITRO_ENCLAVES_MISC_DEV_TEST=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_VDPA=y
CONFIG_VIRTIO_PMEM=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MEM=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
CONFIG_VDPA=y
CONFIG_VDPA_SIM=y
CONFIG_VDPA_SIM_NET=y
CONFIG_VDPA_SIM_BLOCK=y
CONFIG_VDPA_USER=y
CONFIG_IFCVF=y
CONFIG_MLX5_VDPA=y
CONFIG_MLX5_VDPA_NET=y
CONFIG_VP_VDPA=y
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_SCSI=y
CONFIG_VHOST_VSOCK=y
CONFIG_VHOST_VDPA=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_UTILS=y
CONFIG_HYPERV_BALLOON=y
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GNTDEV_DMABUF=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_XEN_GRANT_DMA_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCI_STUB=y
CONFIG_XEN_PCIDEV_STUB=y
CONFIG_XEN_PVCALLS_FRONTEND=y
CONFIG_XEN_PVCALLS_BACKEND=y
CONFIG_XEN_SCSI_BACKEND=y
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=y
CONFIG_XEN_UNPOPULATED_ALLOC=y
CONFIG_XEN_GRANT_DMA_IOMMU=y
CONFIG_XEN_GRANT_DMA_OPS=y
CONFIG_XEN_VIRTIO=y
CONFIG_XEN_VIRTIO_FORCE_GRANT=y
# end of Xen driver support

CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=y
CONFIG_COMEDI_TEST=y
CONFIG_COMEDI_PARPORT=y
CONFIG_COMEDI_SSV_DNP=y
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
CONFIG_COMEDI_PCL726=y
CONFIG_COMEDI_PCL730=y
CONFIG_COMEDI_PCL812=y
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=y
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
CONFIG_COMEDI_DAS800=y
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
CONFIG_COMEDI_DT282X=y
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=y
CONFIG_COMEDI_AIO_IIRO_16=y
CONFIG_COMEDI_II_PCI20KC=y
CONFIG_COMEDI_C6XDIGIO=y
CONFIG_COMEDI_MPC624=y
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
CONFIG_COMEDI_NI_ATMIO16D=y
CONFIG_COMEDI_NI_LABPC_ISA=y
CONFIG_COMEDI_PCMAD=y
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
CONFIG_COMEDI_MULTIQ3=y
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
CONFIG_COMEDI_ADDI_APCI_1564=y
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=y
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
CONFIG_COMEDI_ADV_PCI1723=y
CONFIG_COMEDI_ADV_PCI1724=y
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=y
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
CONFIG_COMEDI_AMPLC_PCI230=y
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
CONFIG_COMEDI_ICP_MULTI=y
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=y
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
CONFIG_COMEDI_NI_6527=y
CONFIG_COMEDI_NI_65XX=y
CONFIG_COMEDI_NI_660X=y
CONFIG_COMEDI_NI_670X=y
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=y
CONFIG_COMEDI_DAS08_CS=y
CONFIG_COMEDI_NI_DAQ_700_CS=y
CONFIG_COMEDI_NI_DAQ_DIO24_CS=y
CONFIG_COMEDI_NI_LABPC_CS=y
CONFIG_COMEDI_NI_MIO_CS=y
CONFIG_COMEDI_QUATECH_DAQP_CS=y
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=y
CONFIG_COMEDI_NI_USB6501=y
CONFIG_COMEDI_USBDUX=y
CONFIG_COMEDI_USBDUXFAST=y
CONFIG_COMEDI_USBDUXSIGMA=y
CONFIG_COMEDI_VMK80XX=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=y
CONFIG_COMEDI_TESTS_NI_ROUTES=y
CONFIG_STAGING=y
CONFIG_PRISM2_USB=y
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=y
CONFIG_R8188EU=m
CONFIG_RTS5208=y
CONFIG_OCTEON_ETHERNET=y
CONFIG_VT6655=m
CONFIG_VT6656=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16203=y
CONFIG_ADIS16240=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7816=y
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters

#
# Direct Digital Synthesis
#
CONFIG_AD9832=y
CONFIG_AD9834=y
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y
# end of Active energy metering IC

#
# Resolver to digital converters
#
CONFIG_AD2S1210=y
# end of Resolver to digital converters
# end of IIO staging drivers

CONFIG_FB_SM750=y
CONFIG_USB_EMXX=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y

#
# i.MX5/6/7/8 Media Sub devices
#
CONFIG_VIDEO_IMX_CSI=y
CONFIG_VIDEO_IMX7_CSI=y
# end of i.MX5/6/7/8 Media Sub devices

CONFIG_VIDEO_MAX96712=y
CONFIG_VIDEO_MESON_VDEC=y
CONFIG_VIDEO_OMAP4=y
CONFIG_VIDEO_ROCKCHIP_VDEC=y
CONFIG_VIDEO_SUNXI=y
CONFIG_VIDEO_SUNXI_CEDRUS=y
CONFIG_VIDEO_TEGRA=y
CONFIG_VIDEO_TEGRA_TPG=y
CONFIG_STAGING_MEDIA_DEPRECATED=y
CONFIG_VIDEO_CPIA2=y
CONFIG_VIDEO_VIU=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_PATCH=y
CONFIG_DVB_SP8870=y
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_MXB=y
CONFIG_DVB_BUDGET_CORE=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
CONFIG_DVB_BUDGET_AV=y
CONFIG_VIDEO_STKWEBCAM=y
CONFIG_VIDEO_TM6000=y
CONFIG_VIDEO_TM6000_ALSA=y
CONFIG_VIDEO_TM6000_DVB=y
CONFIG_VIDEO_DM6446_CCDC=y
CONFIG_VIDEO_DM355_CCDC=y
CONFIG_VIDEO_DM365_ISIF=y
CONFIG_USB_ZR364XX=y
CONFIG_STAGING_BOARD=y
CONFIG_LTE_GDM724X=m
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
CONFIG_FB_TFT_BD663474=y
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
CONFIG_FB_TFT_HX8353D=y
CONFIG_FB_TFT_HX8357D=y
CONFIG_FB_TFT_ILI9163=y
CONFIG_FB_TFT_ILI9320=y
CONFIG_FB_TFT_ILI9325=y
CONFIG_FB_TFT_ILI9340=y
CONFIG_FB_TFT_ILI9341=y
CONFIG_FB_TFT_ILI9481=y
CONFIG_FB_TFT_ILI9486=y
CONFIG_FB_TFT_PCD8544=y
CONFIG_FB_TFT_RA8875=y
CONFIG_FB_TFT_S6D02A1=y
CONFIG_FB_TFT_S6D1121=y
CONFIG_FB_TFT_SEPS525=y
CONFIG_FB_TFT_SH1106=y
CONFIG_FB_TFT_SSD1289=y
CONFIG_FB_TFT_SSD1305=y
CONFIG_FB_TFT_SSD1306=y
CONFIG_FB_TFT_SSD1331=y
CONFIG_FB_TFT_SSD1351=y
CONFIG_FB_TFT_ST7735R=y
CONFIG_FB_TFT_ST7789V=y
CONFIG_FB_TFT_TINYLCD=y
CONFIG_FB_TFT_TLS8204=y
CONFIG_FB_TFT_UC1611=y
CONFIG_FB_TFT_UC1701=y
CONFIG_FB_TFT_UPD161704=y
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_NET=y
CONFIG_MOST_VIDEO=y
CONFIG_MOST_DIM2=y
CONFIG_MOST_I2C=y
CONFIG_KS7010=y
CONFIG_GREYBUS_AUDIO=y
CONFIG_GREYBUS_AUDIO_APB_CODEC=y
CONFIG_GREYBUS_BOOTROM=y
CONFIG_GREYBUS_FIRMWARE=y
CONFIG_GREYBUS_HID=y
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
CONFIG_GREYBUS_POWER=y
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
CONFIG_GREYBUS_GPIO=y
CONFIG_GREYBUS_I2C=y
CONFIG_GREYBUS_PWM=y
CONFIG_GREYBUS_SDIO=y
CONFIG_GREYBUS_SPI=y
CONFIG_GREYBUS_UART=y
CONFIG_GREYBUS_USB=y
CONFIG_GREYBUS_ARCHE=y
CONFIG_BCM_VIDEOCORE=y
CONFIG_BCM2835_VCHIQ=y
CONFIG_VCHIQ_CDEV=y
CONFIG_SND_BCM2835=y
CONFIG_VIDEO_BCM2835=y
CONFIG_BCM2835_VCHIQ_MMAL=y
CONFIG_PI433=y
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=y
CONFIG_HMS_ANYBUSS_BUS=y
CONFIG_ARCX_ANYBUS_CONTROLLER=y
CONFIG_HMS_PROFINET=y
CONFIG_QLGE=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_TSI148=y
CONFIG_VME_FAKE=y

#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_GOLDFISH=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=y
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_RPMSG=y
CONFIG_CROS_EC_SPI=y
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CROS_EC_CHARDEV=y
CONFIG_CROS_EC_LIGHTBAR=y
CONFIG_CROS_EC_VBC=y
CONFIG_CROS_EC_DEBUGFS=y
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_EC_TYPEC=y
CONFIG_CROS_USBPD_LOGGER=y
CONFIG_CROS_USBPD_NOTIFY=y
CONFIG_CHROMEOS_PRIVACY_SCREEN=y
CONFIG_CROS_TYPEC_SWITCH=y
CONFIG_WILCO_EC=y
CONFIG_WILCO_EC_DEBUGFS=y
CONFIG_WILCO_EC_EVENTS=y
CONFIG_WILCO_EC_TELEMETRY=y
CONFIG_CROS_KUNIT=y
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_MLXREG_LC=y
CONFIG_MLXBF_TMFIFO=y
CONFIG_MLXBF_BOOTCTL=y
CONFIG_MLXBF_PMC=y
CONFIG_NVSW_SN2201=y
CONFIG_OLPC_EC=y
CONFIG_OLPC_XO175=y
CONFIG_OLPC_XO175_EC=y
CONFIG_SURFACE_PLATFORMS=y
CONFIG_SURFACE_3_POWER_OPREGION=y
CONFIG_SURFACE_ACPI_NOTIFY=y
CONFIG_SURFACE_AGGREGATOR_CDEV=y
CONFIG_SURFACE_AGGREGATOR_HUB=y
CONFIG_SURFACE_AGGREGATOR_REGISTRY=y
CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH=y
CONFIG_SURFACE_DTX=y
CONFIG_SURFACE_GPE=y
CONFIG_SURFACE_HOTPLUG=y
CONFIG_SURFACE_PLATFORM_PROFILE=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_SURFACE_AGGREGATOR=y
CONFIG_SURFACE_AGGREGATOR_BUS=y
CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y

#
# Clock driver for ARM Reference designs
#
CONFIG_CLK_ICST=y
CONFIG_CLK_SP810=y
CONFIG_CLK_VEXPRESS_OSC=y
# end of Clock driver for ARM Reference designs

CONFIG_CLK_HSDK=y
CONFIG_LMK04832=y
CONFIG_COMMON_CLK_APPLE_NCO=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_HI655X=y
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_BM1880=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_TPS68470=y
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_EN7523=y
CONFIG_COMMON_CLK_FSL_FLEXSPI=y
CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_GEMINI=y
CONFIG_COMMON_CLK_LAN966X=y
CONFIG_COMMON_CLK_ASPEED=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_AXI_CLKGEN=y
CONFIG_CLK_QORIQ=y
CONFIG_CLK_LS1028A_PLLDIG=y
CONFIG_COMMON_CLK_XGENE=y
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PALMAS=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_OXNAS=y
CONFIG_COMMON_CLK_RS9_PCIE=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_VC7=y
CONFIG_COMMON_CLK_MMP2_AUDIO=y
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
CONFIG_CLK_OWL_S500=y
CONFIG_CLK_OWL_S700=y
CONFIG_CLK_OWL_S900=y
CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC=y
CONFIG_CLK_BAIKAL_T1=y
CONFIG_CLK_BT1_CCU_PLL=y
CONFIG_CLK_BT1_CCU_DIV=y
CONFIG_CLK_BT1_CCU_RST=y
CONFIG_CLK_BCM2711_DVP=y
CONFIG_CLK_BCM2835=y
CONFIG_CLK_BCM_63XX=y
CONFIG_CLK_BCM_63XX_GATE=y
CONFIG_CLK_BCM_KONA=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_CYGNUS=y
CONFIG_CLK_BCM_HR2=y
CONFIG_CLK_BCM_NSP=y
CONFIG_CLK_BCM_NS2=y
CONFIG_CLK_BCM_SR=y
CONFIG_CLK_RASPBERRYPI=y
CONFIG_COMMON_CLK_HI3516CV300=y
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3559A=y
CONFIG_COMMON_CLK_HI3660=y
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
CONFIG_STUB_CLK_HI3660=y
CONFIG_COMMON_CLK_BOSTON=y
CONFIG_MXC_CLK=y
CONFIG_MXC_CLK_SCU=y
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MN=y
CONFIG_CLK_IMX8MP=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8QXP=y
CONFIG_CLK_IMX8ULP=y
CONFIG_CLK_IMX93=y

#
# Ingenic SoCs drivers
#
CONFIG_INGENIC_CGU_COMMON=y
CONFIG_INGENIC_CGU_JZ4740=y
CONFIG_INGENIC_CGU_JZ4725B=y
CONFIG_INGENIC_CGU_JZ4760=y
CONFIG_INGENIC_CGU_JZ4770=y
CONFIG_INGENIC_CGU_JZ4780=y
CONFIG_INGENIC_CGU_X1000=y
CONFIG_INGENIC_CGU_X1830=y
CONFIG_INGENIC_TCU_CLK=y
# end of Ingenic SoCs drivers

CONFIG_COMMON_CLK_KEYSTONE=y
CONFIG_TI_SCI_CLK=y
CONFIG_TI_SCI_CLK_PROBE_FROM_FW=y
CONFIG_TI_SYSCON_CLK=y

#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
CONFIG_COMMON_CLK_MT2701_AUDSYS=y
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
CONFIG_COMMON_CLK_MT2712_IMGSYS=y
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
CONFIG_COMMON_CLK_MT2712_MMSYS=y
CONFIG_COMMON_CLK_MT2712_VDECSYS=y
CONFIG_COMMON_CLK_MT2712_VENCSYS=y
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
CONFIG_COMMON_CLK_MT6765_CAMSYS=y
CONFIG_COMMON_CLK_MT6765_GCESYS=y
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
CONFIG_COMMON_CLK_MT6765_VCODECSYS=y
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2BSYS=y
CONFIG_COMMON_CLK_MT6779=y
CONFIG_COMMON_CLK_MT6779_MMSYS=y
CONFIG_COMMON_CLK_MT6779_IMGSYS=y
CONFIG_COMMON_CLK_MT6779_IPESYS=y
CONFIG_COMMON_CLK_MT6779_CAMSYS=y
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
CONFIG_COMMON_CLK_MT6779_MFGCFG=y
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
CONFIG_COMMON_CLK_MT6795=y
CONFIG_COMMON_CLK_MT6795_MFGCFG=y
CONFIG_COMMON_CLK_MT6795_MMSYS=y
CONFIG_COMMON_CLK_MT6795_VDECSYS=y
CONFIG_COMMON_CLK_MT6795_VENCSYS=y
CONFIG_COMMON_CLK_MT6797=y
CONFIG_COMMON_CLK_MT6797_MMSYS=y
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
CONFIG_COMMON_CLK_MT7622=y
CONFIG_COMMON_CLK_MT7622_ETHSYS=y
CONFIG_COMMON_CLK_MT7622_HIFSYS=y
CONFIG_COMMON_CLK_MT7622_AUDSYS=y
CONFIG_COMMON_CLK_MT7629=y
CONFIG_COMMON_CLK_MT7629_ETHSYS=y
CONFIG_COMMON_CLK_MT7629_HIFSYS=y
CONFIG_COMMON_CLK_MT7986=y
CONFIG_COMMON_CLK_MT7986_ETHSYS=y
CONFIG_COMMON_CLK_MT8135=y
CONFIG_COMMON_CLK_MT8167=y
CONFIG_COMMON_CLK_MT8167_AUDSYS=y
CONFIG_COMMON_CLK_MT8167_IMGSYS=y
CONFIG_COMMON_CLK_MT8167_MFGCFG=y
CONFIG_COMMON_CLK_MT8167_MMSYS=y
CONFIG_COMMON_CLK_MT8167_VDECSYS=y
CONFIG_COMMON_CLK_MT8173=y
CONFIG_COMMON_CLK_MT8173_MMSYS=y
CONFIG_COMMON_CLK_MT8183=y
CONFIG_COMMON_CLK_MT8183_AUDIOSYS=y
CONFIG_COMMON_CLK_MT8183_CAMSYS=y
CONFIG_COMMON_CLK_MT8183_IMGSYS=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE0=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE1=y
CONFIG_COMMON_CLK_MT8183_IPU_ADL=y
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
CONFIG_COMMON_CLK_MT8183_MFGCFG=y
CONFIG_COMMON_CLK_MT8183_MMSYS=y
CONFIG_COMMON_CLK_MT8183_VDECSYS=y
CONFIG_COMMON_CLK_MT8183_VENCSYS=y
CONFIG_COMMON_CLK_MT8186=y
CONFIG_COMMON_CLK_MT8192=y
CONFIG_COMMON_CLK_MT8192_AUDSYS=y
CONFIG_COMMON_CLK_MT8192_CAMSYS=y
CONFIG_COMMON_CLK_MT8192_IMGSYS=y
CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP=y
CONFIG_COMMON_CLK_MT8192_IPESYS=y
CONFIG_COMMON_CLK_MT8192_MDPSYS=y
CONFIG_COMMON_CLK_MT8192_MFGCFG=y
CONFIG_COMMON_CLK_MT8192_MMSYS=y
CONFIG_COMMON_CLK_MT8192_MSDC=y
CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
CONFIG_COMMON_CLK_MT8192_VDECSYS=y
CONFIG_COMMON_CLK_MT8192_VENCSYS=y
CONFIG_COMMON_CLK_MT8195=y
CONFIG_COMMON_CLK_MT8365=y
CONFIG_COMMON_CLK_MT8365_APU=y
CONFIG_COMMON_CLK_MT8365_CAM=y
CONFIG_COMMON_CLK_MT8365_MFG=y
CONFIG_COMMON_CLK_MT8365_MMSYS=y
CONFIG_COMMON_CLK_MT8365_VDEC=y
CONFIG_COMMON_CLK_MT8365_VENC=y
CONFIG_COMMON_CLK_MT8516=y
CONFIG_COMMON_CLK_MT8516_AUDSYS=y
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
CONFIG_COMMON_CLK_MESON_PHASE=y
CONFIG_COMMON_CLK_MESON_PLL=y
CONFIG_COMMON_CLK_MESON_SCLK_DIV=y
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y
CONFIG_COMMON_CLK_GXBB=y
CONFIG_COMMON_CLK_AXG=y
CONFIG_COMMON_CLK_AXG_AUDIO=y
CONFIG_COMMON_CLK_G12A=y
# end of Clock support for Amlogic platforms

CONFIG_MSTAR_MSC313_MPLL=y
CONFIG_MCHP_CLK_MPFS=y
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_AP_CPU_CLK=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_COMMON_CLK_PISTACHIO=y
CONFIG_QCOM_GDSC=y
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_A7PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
CONFIG_QCOM_CLK_APCC_MSM8996=y
CONFIG_QCOM_CLK_APCS_SDX55=y
CONFIG_QCOM_CLK_RPM=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_QCOM_CLK_RPMH=y
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
CONFIG_IPQ_APSS_PLL=y
CONFIG_IPQ_APSS_6018=y
CONFIG_IPQ_GCC_4019=y
CONFIG_IPQ_GCC_6018=y
CONFIG_IPQ_GCC_806X=y
CONFIG_IPQ_LCC_806X=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_GCC_8909=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8939=y
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_LCC_8960=y
CONFIG_MDM_GCC_9607=y
CONFIG_MDM_GCC_9615=y
CONFIG_MDM_LCC_9615=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_GCC_8953=y
CONFIG_MSM_GCC_8974=y
CONFIG_MSM_MMCC_8974=y
CONFIG_MSM_GCC_8976=y
CONFIG_MSM_MMCC_8994=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_GCC_8996=y
CONFIG_MSM_MMCC_8996=y
CONFIG_MSM_GCC_8998=y
CONFIG_MSM_GPUCC_8998=y
CONFIG_MSM_MMCC_8998=y
CONFIG_QCM_GCC_2290=y
CONFIG_QCM_DISPCC_2290=y
CONFIG_QCS_GCC_404=y
CONFIG_SC_CAMCC_7180=y
CONFIG_SC_CAMCC_7280=y
CONFIG_SC_DISPCC_7180=y
CONFIG_SC_DISPCC_7280=y
CONFIG_SC_GCC_7180=y
CONFIG_SC_GCC_7280=y
CONFIG_SC_GCC_8180X=y
CONFIG_SC_GCC_8280XP=y
CONFIG_SC_GPUCC_7180=y
CONFIG_SC_GPUCC_7280=y
CONFIG_SC_GPUCC_8280XP=y
CONFIG_SC_LPASSCC_7280=y
CONFIG_SC_LPASS_CORECC_7180=y
CONFIG_SC_LPASS_CORECC_7280=y
CONFIG_SC_MSS_7180=y
CONFIG_SC_VIDEOCC_7180=y
CONFIG_SC_VIDEOCC_7280=y
CONFIG_SDM_CAMCC_845=y
CONFIG_SDM_GCC_660=y
CONFIG_SDM_MMCC_660=y
CONFIG_SDM_GPUCC_660=y
CONFIG_QCS_TURING_404=y
CONFIG_QCS_Q6SSTOP_404=y
CONFIG_SDM_GCC_845=y
CONFIG_SDM_GPUCC_845=y
CONFIG_SDM_VIDEOCC_845=y
CONFIG_SDM_DISPCC_845=y
CONFIG_SDM_LPASSCC_845=y
CONFIG_SDX_GCC_55=y
CONFIG_SDX_GCC_65=y
CONFIG_SM_CAMCC_8250=y
CONFIG_SM_CAMCC_8450=y
CONFIG_SM_DISPCC_6115=y
CONFIG_SM_DISPCC_6125=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_DISPCC_6350=y
CONFIG_SM_DISPCC_8450=y
CONFIG_SM_GCC_6115=y
CONFIG_SM_GCC_6125=y
CONFIG_SM_GCC_6350=y
CONFIG_SM_GCC_6375=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_SM_GCC_8350=y
CONFIG_SM_GCC_8450=y
CONFIG_SM_GPUCC_6350=y
CONFIG_SM_GPUCC_8150=y
CONFIG_SM_GPUCC_8250=y
CONFIG_SM_GPUCC_8350=y
CONFIG_SM_VIDEOCC_8150=y
CONFIG_SM_VIDEOCC_8250=y
CONFIG_SPMI_PMIC_CLKDIV=y
CONFIG_QCOM_HFPLL=y
CONFIG_KPSS_XCC=y
CONFIG_CLK_GFM_LPASS_SM8250=y
CONFIG_CLK_MT7621=y
CONFIG_CLK_RENESAS=y
CONFIG_CLK_EMEV2=y
CONFIG_CLK_RZA1=y
CONFIG_CLK_R7S9210=y
CONFIG_CLK_R8A73A4=y
CONFIG_CLK_R8A7740=y
CONFIG_CLK_R8A7742=y
CONFIG_CLK_R8A7743=y
CONFIG_CLK_R8A7745=y
CONFIG_CLK_R8A77470=y
CONFIG_CLK_R8A774A1=y
CONFIG_CLK_R8A774B1=y
CONFIG_CLK_R8A774C0=y
CONFIG_CLK_R8A774E1=y
CONFIG_CLK_R8A7778=y
CONFIG_CLK_R8A7779=y
CONFIG_CLK_R8A7790=y
CONFIG_CLK_R8A7791=y
CONFIG_CLK_R8A7792=y
CONFIG_CLK_R8A7794=y
CONFIG_CLK_R8A7795=y
CONFIG_CLK_R8A77960=y
CONFIG_CLK_R8A77961=y
CONFIG_CLK_R8A77965=y
CONFIG_CLK_R8A77970=y
CONFIG_CLK_R8A77980=y
CONFIG_CLK_R8A77990=y
CONFIG_CLK_R8A77995=y
CONFIG_CLK_R8A779A0=y
CONFIG_CLK_R8A779F0=y
CONFIG_CLK_R8A779G0=y
CONFIG_CLK_R9A06G032=y
CONFIG_CLK_R9A07G043=y
CONFIG_CLK_R9A07G044=y
CONFIG_CLK_R9A07G054=y
CONFIG_CLK_R9A09G011=y
CONFIG_CLK_SH73A0=y
CONFIG_CLK_RCAR_CPG_LIB=y
CONFIG_CLK_RCAR_GEN2_CPG=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_GEN4_CPG=y
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
CONFIG_CLK_RZG2L=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_CPG_MSTP=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_ROCKCHIP=y
CONFIG_CLK_PX30=y
CONFIG_CLK_RV110X=y
CONFIG_CLK_RV1126=y
CONFIG_CLK_RK3036=y
CONFIG_CLK_RK312X=y
CONFIG_CLK_RK3188=y
CONFIG_CLK_RK322X=y
CONFIG_CLK_RK3288=y
CONFIG_CLK_RK3308=y
CONFIG_CLK_RK3328=y
CONFIG_CLK_RK3368=y
CONFIG_CLK_RK3399=y
CONFIG_CLK_RK3568=y
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_S3C64XX_COMMON_CLK=y
CONFIG_S5PV210_COMMON_CLK=y
CONFIG_EXYNOS_3250_COMMON_CLK=y
CONFIG_EXYNOS_4_COMMON_CLK=y
CONFIG_EXYNOS_5250_COMMON_CLK=y
CONFIG_EXYNOS_5260_COMMON_CLK=y
CONFIG_EXYNOS_5410_COMMON_CLK=y
CONFIG_EXYNOS_5420_COMMON_CLK=y
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
CONFIG_EXYNOS_CLKOUT=y
CONFIG_S3C2410_COMMON_CLK=y
CONFIG_S3C2412_COMMON_CLK=y
CONFIG_S3C2443_COMMON_CLK=y
CONFIG_TESLA_FSD_COMMON_CLK=y
CONFIG_CLK_SIFIVE=y
CONFIG_CLK_SIFIVE_PRCI=y
CONFIG_CLK_INTEL_SOCFPGA=y
CONFIG_CLK_INTEL_SOCFPGA32=y
CONFIG_CLK_INTEL_SOCFPGA64=y
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=y
CONFIG_SPRD_SC9863A_CLK=y
CONFIG_SPRD_UMS512_CLK=y
CONFIG_CLK_STARFIVE_JH7100=y
CONFIG_CLK_STARFIVE_JH7100_AUDIO=y
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
CONFIG_SUNXI_CCU=y
CONFIG_SUNIV_F1C100S_CCU=y
CONFIG_SUN20I_D1_CCU=y
CONFIG_SUN20I_D1_R_CCU=y
CONFIG_SUN50I_A64_CCU=y
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H616_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
CONFIG_SUN4I_A10_CCU=y
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN6I_RTC_CCU=y
CONFIG_SUN8I_A23_CCU=y
CONFIG_SUN8I_A33_CCU=y
CONFIG_SUN8I_A83T_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_V3S_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R40_CCU=y
CONFIG_SUN9I_A80_CCU=y
CONFIG_SUN8I_R_CCU=y
CONFIG_CLK_TEGRA_BPMP=y
CONFIG_TEGRA_CLK_DFLL=y
CONFIG_TEGRA124_CLK_EMC=y
CONFIG_COMMON_CLK_TI_ADPLL=y
CONFIG_CLK_UNIPHIER=y
CONFIG_COMMON_CLK_VISCONTI=y
CONFIG_CLK_LGM_CGU=y
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HWSPINLOCK_SPRD=y
CONFIG_HWSPINLOCK_STM32=y
CONFIG_HWSPINLOCK_SUN6I=y
CONFIG_HSEM_U8500=y

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_ACPI=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
CONFIG_BCM_KONA_TIMER=y
CONFIG_DAVINCI_TIMER=y
CONFIG_DIGICOLOR_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_DW_APB_TIMER=y
CONFIG_DW_APB_TIMER_OF=y
CONFIG_FTTMR010_TIMER=y
CONFIG_IXP4XX_TIMER=y
CONFIG_ROCKCHIP_TIMER=y
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_TEGRA_TIMER=y
CONFIG_TEGRA186_TIMER=y
CONFIG_VT8500_TIMER=y
CONFIG_NPCM7XX_TIMER=y
CONFIG_CADENCE_TTC_TIMER=y
CONFIG_ASM9260_TIMER=y
CONFIG_CLKSRC_DBX500_PRCMU=y
CONFIG_CLPS711X_TIMER=y
CONFIG_MXS_TIMER=y
CONFIG_NSPIRE_TIMER=y
CONFIG_KEYSTONE_TIMER=y
CONFIG_INTEGRATOR_AP_TIMER=y
CONFIG_CLKSRC_PISTACHIO=y
CONFIG_CLKSRC_TI_32K=y
CONFIG_CLKSRC_STM32_LP=y
CONFIG_CLKSRC_MPS2=y
CONFIG_ARC_TIMERS=y
CONFIG_ARC_TIMERS_64BIT=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
CONFIG_FSL_ERRATUM_A008585=y
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
CONFIG_ARM_TIMER_SP804=y
CONFIG_ARMV7M_SYSTICK=y
CONFIG_ATMEL_PIT=y
CONFIG_ATMEL_ST=y
CONFIG_CLKSRC_EXYNOS_MCT=y
CONFIG_CLKSRC_SAMSUNG_PWM=y
CONFIG_FSL_FTM_TIMER=y
CONFIG_OXNAS_RPS_TIMER=y
CONFIG_SYS_SUPPORTS_SH_CMT=y
CONFIG_MTK_TIMER=y
CONFIG_SPRD_TIMER=y
CONFIG_SYS_SUPPORTS_SH_TMU=y
CONFIG_CLKSRC_JCORE_PIT=y
CONFIG_SH_TIMER_CMT=y
CONFIG_SH_TIMER_MTU2=y
CONFIG_RENESAS_OSTM=y
CONFIG_SH_TIMER_TMU=y
CONFIG_EM_TIMER_STI=y
CONFIG_CLKSRC_VERSATILE=y
CONFIG_CLKSRC_PXA=y
CONFIG_CLKSRC_IMX_GPT=y
CONFIG_CLKSRC_IMX_TPM=y
CONFIG_TIMER_IMX_SYS_CTR=y
CONFIG_CLKSRC_ST_LPC=y
CONFIG_GXP_TIMER=y
CONFIG_MSC313E_TIMER=y
CONFIG_INGENIC_TIMER=y
CONFIG_INGENIC_SYSOST=y
CONFIG_INGENIC_OST=y
CONFIG_MICROCHIP_PIT64B=y
CONFIG_GOLDFISH_TIMER=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_APPLE_MAILBOX=y
CONFIG_ARM_MHU=y
CONFIG_ARM_MHU_V2=y
CONFIG_IMX_MBOX=y
CONFIG_PLATFORM_MHU=y
CONFIG_PL320_MBOX=y
CONFIG_ARMADA_37XX_RWTM_MBOX=y
CONFIG_OMAP2PLUS_MBOX=y
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
CONFIG_ROCKCHIP_MBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_BCM2835_MBOX=y
CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_HI3660_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_MAILBOX_TEST=y
CONFIG_POLARFIRE_SOC_MAILBOX=y
CONFIG_QCOM_APCS_IPC=y
CONFIG_TEGRA_HSP_MBOX=y
CONFIG_XGENE_SLIMPRO_MBOX=y
CONFIG_BCM_PDC_MBOX=y
CONFIG_BCM_FLEXRM_MBOX=y
CONFIG_STM32_IPCC=y
CONFIG_MTK_ADSP_MBOX=y
CONFIG_MTK_CMDQ_MBOX=y
CONFIG_ZYNQMP_IPI_MBOX=y
CONFIG_SUN6I_MSGBOX=y
CONFIG_SPRD_MBOX=y
CONFIG_QCOM_IPCC=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_DART=y
# end of Generic IOMMU Pagetable Support

CONFIG_IOMMU_DEBUGFS=y
CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_IOMMU_DEBUG=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_SUN50I_IOMMU=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_EXYNOS_IOMMU=y
CONFIG_EXYNOS_IOMMU_DEBUG=y
CONFIG_IPMMU_VMSA=y
CONFIG_APPLE_DART=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS=y
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
CONFIG_ARM_SMMU_QCOM=y
CONFIG_ARM_SMMU_QCOM_DEBUG=y
CONFIG_ARM_SMMU_V3=y
CONFIG_ARM_SMMU_V3_SVA=y
CONFIG_S390_CCW_IOMMU=y
CONFIG_S390_AP_IOMMU=y
CONFIG_MTK_IOMMU=y
CONFIG_QCOM_IOMMU=y
CONFIG_VIRTIO_IOMMU=y
CONFIG_SPRD_IOMMU=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
CONFIG_IMX_REMOTEPROC=y
CONFIG_IMX_DSP_REMOTEPROC=y
CONFIG_INGENIC_VPU_RPROC=y
CONFIG_MTK_SCP=y
CONFIG_MESON_MX_AO_ARC_REMOTEPROC=y
CONFIG_PRU_REMOTEPROC=y
CONFIG_QCOM_PIL_INFO=y
CONFIG_QCOM_RPROC_COMMON=y
CONFIG_QCOM_Q6V5_COMMON=y
CONFIG_QCOM_Q6V5_ADSP=y
CONFIG_QCOM_Q6V5_MSS=y
CONFIG_QCOM_Q6V5_PAS=y
CONFIG_QCOM_Q6V5_WCSS=y
CONFIG_QCOM_SYSMON=y
CONFIG_QCOM_WCNSS_PIL=y
CONFIG_RCAR_REMOTEPROC=y
CONFIG_TI_K3_DSP_REMOTEPROC=y
CONFIG_TI_K3_R5_REMOTEPROC=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_MTK_SCP=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_QCOM_GLINK_SMEM=y
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=y
CONFIG_SOUNDWIRE_INTEL=y
CONFIG_SOUNDWIRE_QCOM=y
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=y

#
# SOC (System On Chip) specific Drivers
#
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y

#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_GX_PM_DOMAINS=y
CONFIG_MESON_EE_PM_DOMAINS=y
CONFIG_MESON_SECURE_PM_DOMAINS=y
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
CONFIG_APPLE_PMGR_PWRSTATE=y
CONFIG_APPLE_RTKIT=y
CONFIG_APPLE_SART=y
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_UART_ROUTING=y
CONFIG_ASPEED_P2A_CTRL=y
CONFIG_ASPEED_SOCINFO=y
# end of ASPEED SoC drivers

CONFIG_AT91_SOC_ID=y
CONFIG_AT91_SOC_SFR=y

#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_SOC_BCM63XX=y
CONFIG_SOC_BRCMSTB=y
CONFIG_BCM63XX_POWER=y
CONFIG_BCM_PMB=y
CONFIG_BRCMSTB_PM=y
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
CONFIG_FSL_DPAA=y
CONFIG_FSL_DPAA_CHECKING=y
CONFIG_FSL_BMAN_TEST=y
CONFIG_FSL_BMAN_TEST_API=y
CONFIG_FSL_QMAN_TEST=y
CONFIG_FSL_QMAN_TEST_API=y
CONFIG_FSL_QMAN_TEST_STASH=y
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_QE_TDM=y
CONFIG_FSL_GUTS=y
CONFIG_FSL_MC_DPIO=y
CONFIG_DPAA2_CONSOLE=y
CONFIG_FSL_RCPM=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
CONFIG_A64FX_DIAG=y
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
CONFIG_SOC_IMX9=y
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=y
# end of Enable LiteX SoC Builder specific drivers

#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=y
CONFIG_MTK_DEVAPC=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_SCPSYS_PM_DOMAINS=y
CONFIG_MTK_MMSYS=y
CONFIG_MTK_SVS=y
# end of MediaTek SoC drivers

CONFIG_POLARFIRE_SOC_SYS_CTRL=y

#
# Qualcomm SoC drivers
#
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_CPR=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_LLCC=y
CONFIG_QCOM_KRYO_L2_ACCESSORS=y
CONFIG_QCOM_MDT_LOADER=y
CONFIG_QCOM_OCMEM=y
CONFIG_QCOM_PDR_HELPERS=y
CONFIG_QCOM_QMI_HELPERS=y
CONFIG_QCOM_RMTFS_MEM=y
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_RPMPD=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMEM_STATE=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
CONFIG_QCOM_SOCINFO=y
CONFIG_QCOM_SPM=y
CONFIG_QCOM_STATS=y
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_QCOM_APR=y
CONFIG_QCOM_ICC_BWMON=y
# end of Qualcomm SoC drivers

CONFIG_SOC_RENESAS=y
CONFIG_ARCH_RCAR_GEN3=y
CONFIG_ARCH_RZG2L=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77950=y
CONFIG_ARCH_R8A77951=y
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77960=y
CONFIG_ARCH_R8A77961=y
CONFIG_ARCH_R8A779F0=y
CONFIG_ARCH_R8A77980=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A779A0=y
CONFIG_ARCH_R8A779G0=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A774E1=y
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_ARCH_R9A07G043=y
CONFIG_ARCH_R9A07G044=y
CONFIG_ARCH_R9A07G054=y
CONFIG_ARCH_R9A09G011=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RCAR_GEN4=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A7794=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7779=y
CONFIG_SYSC_R8A7790=y
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A7791=y
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
CONFIG_SYSC_R8A779F0=y
CONFIG_SYSC_R8A7792=y
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
CONFIG_SYSC_R8A779G0=y
CONFIG_SYSC_RMOBILE=y
CONFIG_SYSC_R8A77470=y
CONFIG_SYSC_R8A7745=y
CONFIG_SYSC_R8A7742=y
CONFIG_SYSC_R8A7743=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
CONFIG_ROCKCHIP_GRF=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ROCKCHIP_DTPM=m
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_ASV_ARM=y
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_USI=y
CONFIG_EXYNOS_PMU=y
CONFIG_EXYNOS_PMU_ARM_DRIVERS=y
CONFIG_EXYNOS_PM_DOMAINS=y
CONFIG_EXYNOS_REGULATOR_COUPLER=y
CONFIG_SUNXI_MBUS=y
CONFIG_SUNXI_SRAM=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_TEGRA_234_SOC=y
CONFIG_SOC_TEGRA_FUSE=y
CONFIG_SOC_TEGRA_FLOWCTRL=y
CONFIG_SOC_TEGRA_PMC=y
CONFIG_SOC_TEGRA_POWERGATE_BPMP=y
CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
CONFIG_SOC_TEGRA_CBB=y
CONFIG_SOC_TI=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_TI_K3_RINGACC=y
CONFIG_TI_K3_SOCINFO=y
CONFIG_TI_PRUSS=y
CONFIG_TI_SCI_INTA_MSI_DOMAIN=y
CONFIG_UX500_SOC_ID=y

#
# Xilinx SoC drivers
#
CONFIG_ZYNQMP_POWER=y
CONFIG_ZYNQMP_PM_DOMAINS=y
CONFIG_XLNX_EVENT_MANAGER=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_ARM_IMX_BUS_DEVFREQ=y
CONFIG_ARM_IMX8M_DDRC_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=y
CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
CONFIG_ARM_RK3399_DMC_DEVFREQ=y
CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_INTEL_INT3496=y
CONFIG_EXTCON_INTEL_CHT_WC=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
CONFIG_EXTCON_QCOM_SPMI_MISC=y
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_EXTCON_USBC_TUSB320=y
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_ARM_PL172_MPMC=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_EBI=y
CONFIG_BRCMSTB_DPFE=y
CONFIG_BRCMSTB_MEMC=y
CONFIG_BT1_L2_CTL=y
CONFIG_TI_AEMIF=y
CONFIG_TI_EMIF=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_GPMC_DEBUG=y
CONFIG_FPGA_DFL_EMIF=y
CONFIG_MVEBU_DEVBUS=y
CONFIG_FSL_CORENET_CF=y
CONFIG_FSL_IFC=y
CONFIG_JZ4780_NEMC=y
CONFIG_MTK_SMI=y
CONFIG_DA8XX_DDRCTL=y
CONFIG_PL353_SMC=y
CONFIG_RENESAS_RPCIF=y
CONFIG_STM32_FMC2_EBI=y
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS5422_DMC=y
CONFIG_EXYNOS_SROM=y
CONFIG_TEGRA_MC=y
CONFIG_TEGRA20_EMC=y
CONFIG_TEGRA30_EMC=y
CONFIG_TEGRA124_EMC=y
CONFIG_TEGRA210_EMC_TABLE=y
CONFIG_TEGRA210_EMC=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16209=y
CONFIG_ADXL313=y
CONFIG_ADXL313_I2C=y
CONFIG_ADXL313_SPI=y
CONFIG_ADXL355=y
CONFIG_ADXL355_I2C=y
CONFIG_ADXL355_SPI=y
CONFIG_ADXL367=y
CONFIG_ADXL367_SPI=y
CONFIG_ADXL367_I2C=y
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA220=y
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMA400_SPI=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
CONFIG_BMI088_ACCEL=y
CONFIG_BMI088_ACCEL_SPI=y
CONFIG_DA280=y
CONFIG_DA311=y
CONFIG_DMARD06=y
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_FXLS8962AF=y
CONFIG_FXLS8962AF_I2C=y
CONFIG_FXLS8962AF_SPI=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
CONFIG_MMA7455_SPI=y
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
CONFIG_MSA311=y
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_SCA3000=y
CONFIG_SCA3300=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7091R5=y
CONFIG_AD7124=y
CONFIG_AD7192=y
CONFIG_AD7266=y
CONFIG_AD7280=y
CONFIG_AD7291=y
CONFIG_AD7292=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
CONFIG_AD7766=y
CONFIG_AD7768_1=y
CONFIG_AD7780=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD7949=y
CONFIG_AD799X=y
CONFIG_AD9467=y
CONFIG_ADI_AXI_ADC=y
CONFIG_ASPEED_ADC=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
CONFIG_BCM_IPROC_ADC=y
CONFIG_BERLIN2_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_CPCAP_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_EXYNOS_ADC=y
CONFIG_MXS_LRADC_ADC=y
CONFIG_FSL_MX25_ADC=y
CONFIG_HI8435=y
CONFIG_HX711=y
CONFIG_INGENIC_ADC=y
CONFIG_IMX7D_ADC=y
CONFIG_IMX8QXP_ADC=y
CONFIG_LP8788_ADC=y
CONFIG_LPC18XX_ADC=y
CONFIG_LPC32XX_ADC=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2496=y
CONFIG_LTC2497=y
CONFIG_MAX1027=y
CONFIG_MAX11100=y
CONFIG_MAX1118=y
CONFIG_MAX11205=y
CONFIG_MAX1241=y
CONFIG_MAX1363=y
CONFIG_MAX9611=y
CONFIG_MCP320X=y
CONFIG_MCP3422=y
CONFIG_MCP3911=y
CONFIG_MEDIATEK_MT6360_ADC=y
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_MEN_Z188_ADC=y
CONFIG_MESON_SARADC=y
CONFIG_MP2629_ADC=y
CONFIG_NAU7802=y
CONFIG_NPCM_ADC=y
CONFIG_PALMAS_GPADC=y
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_PM8XXX_XOADC=y
CONFIG_QCOM_SPMI_RRADC=y
CONFIG_QCOM_SPMI_IADC=y
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
CONFIG_RCAR_GYRO_ADC=y
CONFIG_RN5T618_ADC=y
CONFIG_ROCKCHIP_SARADC=y
CONFIG_RICHTEK_RTQ6056=y
CONFIG_RZG2L_ADC=y
CONFIG_SC27XX_ADC=y
CONFIG_SPEAR_ADC=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_STM32_ADC_CORE=y
CONFIG_STM32_ADC=y
CONFIG_STM32_DFSDM_CORE=y
CONFIG_STM32_DFSDM_ADC=y
CONFIG_STMPE_ADC=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADC0832=y
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
CONFIG_TI_ADC128S052=y
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
CONFIG_TI_ADS8344=y
CONFIG_TI_ADS8688=y
CONFIG_TI_ADS124S08=y
CONFIG_TI_ADS131E08=y
CONFIG_TI_AM335X_ADC=y
CONFIG_TI_TLC4541=y
CONFIG_TI_TSC2046=y
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
CONFIG_VIPERBOARD_ADC=y
CONFIG_XILINX_XADC=y
CONFIG_XILINX_AMS=y
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
CONFIG_AD74413R=y
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_AD8366=y
CONFIG_ADA4250=y
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_BME680_SPI=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
CONFIG_SCD30_CORE=y
CONFIG_SCD30_I2C=y
CONFIG_SCD30_SERIAL=y
CONFIG_SCD4X=y
CONFIG_SENSIRION_SGP30=y
CONFIG_SENSIRION_SGP40=y
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
CONFIG_SPS30_SERIAL=y
CONFIG_SENSEAIR_SUNRISE_CO2=y
CONFIG_VZ89X=y
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=y
CONFIG_IIO_CROS_EC_SENSORS=y
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=y

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
CONFIG_IIO_SCMI=y
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD3552R=y
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
CONFIG_LTC2688=y
CONFIG_AD5686=y
CONFIG_AD5686_SPI=y
CONFIG_AD5696_I2C=y
CONFIG_AD5755=y
CONFIG_AD5758=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5766=y
CONFIG_AD5770R=y
CONFIG_AD5791=y
CONFIG_AD7293=y
CONFIG_AD7303=y
CONFIG_AD8801=y
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
CONFIG_LPC18XX_DAC=y
CONFIG_LTC1660=y
CONFIG_LTC2632=y
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
CONFIG_MCP4922=y
CONFIG_STM32_DAC=y
CONFIG_STM32_DAC_CORE=y
CONFIG_TI_DAC082S085=y
CONFIG_TI_DAC5571=y
CONFIG_TI_DAC7311=y
CONFIG_TI_DAC7612=y
CONFIG_VF610_DAC=y
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
# end of IIO dummy driver

#
# Filters
#
CONFIG_ADMV8818=y
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
CONFIG_ADF4371=y
CONFIG_ADMV1013=y
CONFIG_ADMV1014=y
CONFIG_ADMV4420=y
CONFIG_ADRF6780=y
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
CONFIG_ADXRS290=y
CONFIG_ADXRS450=y
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_BMG160_SPI=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_FXAS21002C_SPI=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HDC2010=y
CONFIG_HID_SENSOR_HUMIDITY=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16460=y
CONFIG_ADIS16475=y
CONFIG_ADIS16480=y
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BMI160_SPI=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
CONFIG_BOSCH_BNO055_I2C=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_FXOS8700_SPI=y
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
CONFIG_INV_ICM42600_SPI=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_SPI=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
# end of Inertial measurement units

CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ACPI_ALS=y
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
CONFIG_AL3010=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_AS73211=y
CONFIG_BH1750=y
CONFIG_BH1780=y
CONFIG_CM32181=y
CONFIG_CM3232=y
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
CONFIG_IQS621_ALS=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
CONFIG_HID_SENSOR_PROX=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
CONFIG_LTR501=y
CONFIG_LTRF216A=y
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_ST_UVIS25_SPI=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2591=y
CONFIG_TSL2772=y
CONFIG_TSL4531=y
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_BMC150_MAGN_SPI=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_SENSORS_RM3100_SPI=y
CONFIG_YAMAHA_YAS530=y
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
# end of Inclinometer sensors

CONFIG_IIO_RESCALE_KUNIT_TEST=y
CONFIG_IIO_FORMAT_KUNIT_TEST=y

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
CONFIG_IIO_STM32_TIMER_TRIGGER=y
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=y
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=y
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
CONFIG_MCP4131=y
CONFIG_MCP4531=y
CONFIG_MCP41010=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
CONFIG_IIO_CROS_EC_BARO=y
CONFIG_DLHL60D=y
CONFIG_DPS310=y
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
CONFIG_ICP10100=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5611_SPI=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
# end of Pressure sensors

#
# Lightning sensors
#
CONFIG_AS3935=y
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=y
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=y
CONFIG_SX9310=y
CONFIG_SX9324=y
CONFIG_SX9360=y
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
CONFIG_LTC2983=y
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_HID_SENSOR_TEMP=y
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
CONFIG_MAX31856=y
CONFIG_MAX31865=y
# end of Temperature sensors

CONFIG_NTB=y
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=y
CONFIG_NTB_EPF=m
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_MSI_TEST=y
CONFIG_NTB_TRANSPORT=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_BCM_IPROC=y
CONFIG_PWM_BCM_KONA=y
CONFIG_PWM_BCM2835=y
CONFIG_PWM_BERLIN=y
CONFIG_PWM_BRCMSTB=y
CONFIG_PWM_CLK=y
CONFIG_PWM_CLPS711X=y
CONFIG_PWM_CROS_EC=y
CONFIG_PWM_DWC=y
CONFIG_PWM_EP93XX=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_HIBVT=y
CONFIG_PWM_IMG=y
CONFIG_PWM_IMX1=y
CONFIG_PWM_IMX27=y
CONFIG_PWM_IMX_TPM=y
CONFIG_PWM_INTEL_LGM=y
CONFIG_PWM_IQS620A=y
CONFIG_PWM_JZ4740=y
CONFIG_PWM_KEEMBAY=y
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPC18XX_SCT=y
CONFIG_PWM_LPC32XX=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_MESON=y
CONFIG_PWM_MTK_DISP=y
CONFIG_PWM_MEDIATEK=y
CONFIG_PWM_MXS=y
CONFIG_PWM_NTXEC=y
CONFIG_PWM_OMAP_DMTIMER=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_PXA=y
CONFIG_PWM_RASPBERRYPI_POE=y
CONFIG_PWM_RCAR=y
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SIFIVE=y
CONFIG_PWM_SL28CPLD=y
CONFIG_PWM_SPEAR=y
CONFIG_PWM_SPRD=y
CONFIG_PWM_STI=y
CONFIG_PWM_STM32=y
CONFIG_PWM_STM32_LP=y
CONFIG_PWM_STMPE=y
CONFIG_PWM_SUN4I=y
CONFIG_PWM_SUNPLUS=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_PWM_VISCONTI=y
CONFIG_PWM_VT8500=y
CONFIG_PWM_XILINX=y

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_PM=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
CONFIG_ALPINE_MSI=y
CONFIG_AL_FIC=y
CONFIG_BCM7038_L1_IRQ=y
CONFIG_BCM7120_L2_IRQ=y
CONFIG_BRCMSTB_L2_IRQ=y
CONFIG_DW_APB_ICTL=y
CONFIG_HISILICON_IRQ_MBIGEN=y
CONFIG_MADERA_IRQ=y
CONFIG_JCORE_AIC=y
CONFIG_RENESAS_INTC_IRQPIN=y
CONFIG_RENESAS_IRQC=y
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_RENESAS_RZG2L_IRQC=y
CONFIG_SL28CPLD_INTC=y
CONFIG_SUN6I_R_INTC=y
CONFIG_SUNXI_NMI_INTC=y
CONFIG_TS4800_IRQ=y
CONFIG_XILINX_INTC=y
CONFIG_INGENIC_TCU_IRQ=y
CONFIG_IMX_GPCV2=y
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
CONFIG_LS_EXTIRQ=y
CONFIG_LS_SCFG_MSI=y
CONFIG_PARTITION_PERCPU=y
CONFIG_QCOM_IRQ_COMBINER=y
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_MESON_IRQ_GPIO=y
CONFIG_QCOM_PDC=y
CONFIG_QCOM_MPM=y
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_IMX_MU_MSI=y
CONFIG_TI_SCI_INTR_IRQCHIP=y
CONFIG_TI_SCI_INTA_IRQCHIP=y
CONFIG_TI_PRUSS_INTC=y
CONFIG_EXYNOS_IRQ_COMBINER=y
CONFIG_MST_IRQ=y
CONFIG_APPLE_AIC=y
CONFIG_MCHP_EIC=y
CONFIG_SUNPLUS_SP7021_INTC=y
# end of IRQ chip support

CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_A10SR=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_AXS10X=y
CONFIG_RESET_BCM6345=y
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_HSDK=y
CONFIG_RESET_IMX7=y
CONFIG_RESET_INTEL_GW=y
CONFIG_RESET_K210=y
CONFIG_RESET_LANTIQ=y
CONFIG_RESET_LPC18XX=y
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_MESON=y
CONFIG_RESET_MESON_AUDIO_ARB=y
CONFIG_RESET_NPCM=y
CONFIG_RESET_PISTACHIO=y
CONFIG_RESET_POLARFIRE_SOC=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=y
CONFIG_RESET_RASPBERRYPI=y
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SOCFPGA=y
CONFIG_RESET_STARFIVE_JH7100=y
CONFIG_RESET_SUNPLUS=y
CONFIG_RESET_SUNXI=y
CONFIG_RESET_TI_SCI=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_RESET_TI_TPS380X=y
CONFIG_RESET_TN48M_CPLD=y
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
CONFIG_RESET_ZYNQ=y
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y
CONFIG_RESET_TEGRA_BPMP=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_PHY_PISTACHIO_USB=y
CONFIG_PHY_XGENE=y
CONFIG_USB_LGM_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN6I_MIPI_DPHY=y
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_SUN50I_USB3=y
CONFIG_PHY_MESON8_HDMI_TX=y
CONFIG_PHY_MESON8B_USB2=y
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_MESON_AXG_MIPI_DPHY=y

#
# PHY drivers for Broadcom platforms
#
CONFIG_PHY_BCM63XX_USBH=y
CONFIG_PHY_CYGNUS_PCIE=y
CONFIG_PHY_BCM_SR_USB=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_BCM_NS_USB2=y
CONFIG_PHY_BCM_NS_USB3=y
CONFIG_PHY_NS2_PCIE=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
# end of PHY drivers for Broadcom platforms

CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_DPHY_RX=y
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_LVDS_PHY=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_FSL_IMX8M_PCIE=y
CONFIG_PHY_FSL_LYNX_28G=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HI3660_USB=y
CONFIG_PHY_HI3670_USB=y
CONFIG_PHY_HI3670_PCIE=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_INGENIC_USB=y
CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=y
CONFIG_PHY_BERLIN_USB=y
CONFIG_PHY_MVEBU_A3700_COMPHY=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
CONFIG_PHY_MVEBU_CP110_UTMI=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MMP3_HSIC=y
CONFIG_PHY_MTK_PCIE=y
CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_MTK_UFS=y
CONFIG_PHY_MTK_XSPHY=y
CONFIG_PHY_MTK_HDMI=y
CONFIG_PHY_MTK_MIPI_DSI=y
CONFIG_PHY_MTK_DP=y
CONFIG_PHY_SPARX5_SERDES=y
CONFIG_PHY_LAN966X_SERDES=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_EDP=y
CONFIG_PHY_QCOM_IPQ4019_USB=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_PHY_QCOM_PCIE2=y
CONFIG_PHY_QCOM_QMP=y
CONFIG_PHY_QCOM_QUSB2=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PHY_QCOM_IPQ806X_USB=y
CONFIG_PHY_MT7621_PCI=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PHY_RCAR_GEN2=y
CONFIG_PHY_RCAR_GEN3_PCIE=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=y
CONFIG_PHY_ROCKCHIP_DP=y
CONFIG_PHY_ROCKCHIP_DPHY_RX0=y
CONFIG_PHY_ROCKCHIP_EMMC=y
CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=y
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
CONFIG_PHY_ROCKCHIP_PCIE=y
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_PHY_ROCKCHIP_USB=y
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=y
CONFIG_PHY_SAMSUNG_USB2=y
CONFIG_PHY_S5PV210_USB2=y
CONFIG_PHY_EXYNOS5_USBDRD=y
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_UNIPHIER_PCIE=y
CONFIG_PHY_UNIPHIER_AHCI=y
CONFIG_PHY_ST_SPEAR1310_MIPHY=y
CONFIG_PHY_ST_SPEAR1340_MIPHY=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PHY_SUNPLUS_USB=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_PHY_TEGRA194_P2U=y
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=y
CONFIG_PHY_AM654_SERDES=y
CONFIG_PHY_J721E_WIZ=y
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_TUSB1210=y
CONFIG_PHY_TI_GMII_SEL=y
CONFIG_PHY_INTEL_KEEMBAY_EMMC=y
CONFIG_PHY_INTEL_KEEMBAY_USB=y
CONFIG_PHY_INTEL_LGM_COMBO=y
CONFIG_PHY_INTEL_LGM_EMMC=y
CONFIG_PHY_INTEL_THUNDERBAY_EMMC=y
CONFIG_PHY_XILINX_ZYNQMP=y
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_IDLE_INJECT=y
CONFIG_DTPM=y
CONFIG_DTPM_CPU=y
CONFIG_DTPM_DEVFREQ=y
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y

#
# Performance monitor support
#
CONFIG_ARM_CCI_PMU=y
CONFIG_ARM_CCI400_PMU=y
CONFIG_ARM_CCI5xx_PMU=y
CONFIG_ARM_CCN=y
CONFIG_ARM_CMN=y
CONFIG_ARM_PMU=y
CONFIG_ARM_PMU_ACPI=y
CONFIG_ARM_SMMU_V3_PMU=y
CONFIG_ARM_DSU_PMU=y
CONFIG_FSL_IMX8_DDR_PMU=y
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
CONFIG_THUNDERX2_PMU=y
CONFIG_XGENE_PMU=y
CONFIG_ARM_SPE_PMU=y
CONFIG_ARM_DMC620_PMU=y
CONFIG_MARVELL_CN10K_TAD_PMU=y
CONFIG_APPLE_M1_CPU_PMU=y
CONFIG_ALIBABA_UNCORE_DRW_PMU=y
CONFIG_HISI_PMU=y
CONFIG_HISI_PCIE_PMU=y
CONFIG_HNS3_PMU=y
CONFIG_MARVELL_CN10K_DDR_PMU=y
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_USB4=y
CONFIG_USB4_DEBUGFS_WRITE=y
CONFIG_USB4_DEBUGFS_MARGINING=y
CONFIG_USB4_KUNIT_TEST=y
CONFIG_USB4_DMA_TEST=y

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android

CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_ND_PFN=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_OF_PMEM=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_PMEM=y
CONFIG_DEV_DAX_HMEM=y
CONFIG_DEV_DAX_HMEM_DEVICES=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_APPLE_EFUSES=y
CONFIG_NVMEM_BCM_OCOTP=y
CONFIG_NVMEM_BRCM_NVRAM=y
CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_IMX_OCOTP_SCU=y
CONFIG_NVMEM_JZ4780_EFUSE=y
CONFIG_NVMEM_LAN9662_OTPC=y
CONFIG_NVMEM_LAYERSCAPE_SFP=y
CONFIG_NVMEM_LPC18XX_EEPROM=y
CONFIG_NVMEM_LPC18XX_OTP=y
CONFIG_NVMEM_MESON_EFUSE=y
CONFIG_NVMEM_MESON_MX_EFUSE=y
CONFIG_NVMEM_MICROCHIP_OTPC=y
CONFIG_NVMEM_MTK_EFUSE=y
CONFIG_NVMEM_MXS_OCOTP=y
CONFIG_NVMEM_NINTENDO_OTP=y
CONFIG_NVMEM_QCOM_QFPROM=y
CONFIG_NVMEM_RAVE_SP_EEPROM=y
CONFIG_NVMEM_RMEM=y
CONFIG_NVMEM_ROCKCHIP_EFUSE=y
CONFIG_NVMEM_ROCKCHIP_OTP=y
CONFIG_NVMEM_SC27XX_EFUSE=y
CONFIG_NVMEM_SNVS_LPGPR=y
CONFIG_NVMEM_SPMI_SDAM=y
CONFIG_NVMEM_SPRD_EFUSE=y
CONFIG_NVMEM_STM32_ROMEM=y
CONFIG_NVMEM_SUNPLUS_OCOTP=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_NVMEM_U_BOOT_ENV=y
CONFIG_NVMEM_UNIPHIER_EFUSE=y
CONFIG_NVMEM_VF610_OCOTP=y
CONFIG_NVMEM_ZYNQMP=y

#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
CONFIG_HISI_PTT=y
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_FPGA_MGR_SOCFPGA=y
CONFIG_FPGA_MGR_SOCFPGA_A10=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_ALTERA_PR_IP_CORE_PLAT=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
CONFIG_FPGA_MGR_STRATIX10_SOC=y
CONFIG_FPGA_MGR_XILINX_SPI=y
CONFIG_FPGA_MGR_ICE40_SPI=y
CONFIG_FPGA_MGR_MACHXO2_SPI=y
CONFIG_FPGA_BRIDGE=y
CONFIG_SOCFPGA_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_OF_FPGA_REGION=y
CONFIG_FPGA_DFL=y
CONFIG_FPGA_DFL_FME=y
CONFIG_FPGA_DFL_FME_MGR=y
CONFIG_FPGA_DFL_FME_BRIDGE=y
CONFIG_FPGA_DFL_FME_REGION=y
CONFIG_FPGA_DFL_AFU=y
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=y
CONFIG_FPGA_DFL_PCI=y
CONFIG_FPGA_MGR_ZYNQMP_FPGA=y
CONFIG_FPGA_MGR_VERSAL_FPGA=y
CONFIG_FPGA_M10_BMC_SEC_UPDATE=y
CONFIG_FPGA_MGR_MICROCHIP_SPI=y
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
CONFIG_FSI_MASTER_HUB=y
CONFIG_FSI_MASTER_AST_CF=y
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_TEE=y
CONFIG_OPTEE=y
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
CONFIG_MUX_GPIO=y
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_SLIM_QCOM_NGD_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=y
CONFIG_INTERCONNECT_IMX8MM=y
CONFIG_INTERCONNECT_IMX8MN=y
CONFIG_INTERCONNECT_IMX8MQ=y
CONFIG_INTERCONNECT_IMX8MP=y
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_BCM_VOTER=y
CONFIG_INTERCONNECT_QCOM_MSM8916=y
CONFIG_INTERCONNECT_QCOM_MSM8939=y
CONFIG_INTERCONNECT_QCOM_MSM8974=y
CONFIG_INTERCONNECT_QCOM_MSM8996=y
CONFIG_INTERCONNECT_QCOM_OSM_L3=y
CONFIG_INTERCONNECT_QCOM_QCM2290=y
CONFIG_INTERCONNECT_QCOM_QCS404=y
CONFIG_INTERCONNECT_QCOM_RPMH_POSSIBLE=y
CONFIG_INTERCONNECT_QCOM_RPMH=y
CONFIG_INTERCONNECT_QCOM_SC7180=y
CONFIG_INTERCONNECT_QCOM_SC7280=y
CONFIG_INTERCONNECT_QCOM_SC8180X=y
CONFIG_INTERCONNECT_QCOM_SC8280XP=y
CONFIG_INTERCONNECT_QCOM_SDM660=y
CONFIG_INTERCONNECT_QCOM_SDM845=y
CONFIG_INTERCONNECT_QCOM_SDX55=y
CONFIG_INTERCONNECT_QCOM_SDX65=y
CONFIG_INTERCONNECT_QCOM_SM6350=y
CONFIG_INTERCONNECT_QCOM_SM8150=y
CONFIG_INTERCONNECT_QCOM_SM8250=y
CONFIG_INTERCONNECT_QCOM_SM8350=y
CONFIG_INTERCONNECT_QCOM_SM8450=y
CONFIG_INTERCONNECT_QCOM_SMD_RPM=y
CONFIG_INTERCONNECT_SAMSUNG=y
CONFIG_INTERCONNECT_EXYNOS=y
CONFIG_COUNTER=y
CONFIG_104_QUAD_8=y
CONFIG_INTERRUPT_CNT=y
CONFIG_STM32_TIMER_CNT=y
CONFIG_STM32_LPTIMER_CNT=y
CONFIG_TI_EQEP=y
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=y
CONFIG_INTEL_QEP=y
CONFIG_TI_ECAP_CAPTURE=y
CONFIG_MOST=y
CONFIG_MOST_USB_HDM=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_SND=y
CONFIG_PECI=y
CONFIG_PECI_CPU=y
CONFIG_PECI_ASPEED=y
CONFIG_HTE=y
CONFIG_HTE_TEGRA194=y
CONFIG_HTE_TEGRA194_TEST=y
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
CONFIG_BTRFS_DEBUG=y
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=y
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
CONFIG_FS_VERITY=y
CONFIG_FS_VERITY_DEBUG=y
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VIRTIO_FS=y
CONFIG_FUSE_DAX=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_ERROR_INJECTION=y
CONFIG_CACHEFILES_ONDEMAND=y
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=y
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=y
CONFIG_NTFS3_64BIT_CLUSTER=y
CONFIG_NTFS3_LZX_XPRESS=y
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
CONFIG_PSTORE_FTRACE=y
CONFIG_PSTORE_RAM=y
CONFIG_PSTORE_ZONE=y
CONFIG_PSTORE_BLK=y
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_PMSG_SIZE=64
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_PSTORE_BLK_FTRACE_SIZE=64
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=y
CONFIG_EROFS_FS_DEBUG=y
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
CONFIG_EROFS_FS_ONDEMAND=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=y
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_USE_LEGACY_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DEBUG_DUMP_KEYS=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
CONFIG_CIFS_SMB_DIRECT=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ROOT=y
CONFIG_SMB_SERVER=y
CONFIG_SMB_SERVER_SMBDIRECT=y
CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=y
CONFIG_SMB_SERVER_KERBEROS5=y
CONFIG_SMBFS_COMMON=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_AFS_DEBUG_CURSOR=y
CONFIG_9P_FS=y
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEPRECATED_API=y
CONFIG_DLM_DEBUG=y
CONFIG_UNICODE=y
CONFIG_UNICODE_NORMALIZATION_SELFTEST=y
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_TRUSTED_KEYS_CAAM=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_USER_DECRYPTED_DATA=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_INFINIBAND=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=32768
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
CONFIG_SECURITY_APPARMOR_KUNIT_TEST=y
CONFIG_SECURITY_LOADPIN=y
CONFIG_SECURITY_LOADPIN_ENFORCE=y
CONFIG_SECURITY_LOADPIN_VERITY=y
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_KEXEC=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_ARCH_POLICY=y
CONFIG_IMA_APPRAISE_BUILD_POLICY=y
CONFIG_IMA_APPRAISE_REQUIRE_FIRMWARE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_KEXEC_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_MODULE_SIGS=y
CONFIG_IMA_APPRAISE_REQUIRE_POLICY_SIGS=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_TRUSTED_KEYRING=y
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
CONFIG_IMA_BLACKLIST_KEYRING=y
CONFIG_IMA_LOAD_X509=y
CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
CONFIG_IMA_APPRAISE_SIGNED_INIT=y
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
CONFIG_IMA_DISABLE_HTABLE=y
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
CONFIG_EVM_LOAD_X509=y
CONFIG_EVM_X509_PATH="/etc/keys/x509_evm.der"
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,selinux,smack,tomoyo,apparmor,bpf,integrity"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
CONFIG_GCC_PLUGIN_STACKLEAK=y
CONFIG_STACKLEAK_TRACK_MIN_SIZE=100
CONFIG_STACKLEAK_METRICS=y
CONFIG_STACKLEAK_RUNTIME_DISABLE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

# CONFIG_RANDSTRUCT_NONE is not set
CONFIG_RANDSTRUCT_FULL=y
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
CONFIG_RANDSTRUCT=y
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECDSA=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=y
CONFIG_CRYPTO_CURVE25519=y
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=y
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XCTR=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_AEGIS128_SIMD=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=y
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLYVAL=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_VMAC=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_NHPOLY1305_NEON=y
CONFIG_CRYPTO_CHACHA20_NEON=y

#
# Accelerated Cryptographic Algorithms for CPU (arm64)
#
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_POLY1305_NEON=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA256_ARM64=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_SHA512_ARM64=y
CONFIG_CRYPTO_SHA512_ARM64_CE=y
CONFIG_CRYPTO_SHA3_ARM64=y
CONFIG_CRYPTO_SM3_ARM64_CE=y
CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64=y
CONFIG_CRYPTO_AES_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
CONFIG_CRYPTO_AES_ARM64_BS=y
CONFIG_CRYPTO_SM4_ARM64_CE=y
CONFIG_CRYPTO_SM4_ARM64_CE_BLK=y
CONFIG_CRYPTO_SM4_ARM64_NEON_BLK=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
# end of Accelerated Cryptographic Algorithms for CPU (arm64)

CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN4I_SS=y
CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_CE=y
CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_HASH=y
CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS=y
CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_HASH=y
CONFIG_CRYPTO_DEV_SL3516=y
CONFIG_CRYPTO_DEV_SL3516_DEBUG=y
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG=y
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=255
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=2048
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_PRNG_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_BLOB_GEN=y
CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y
CONFIG_CRYPTO_DEV_SAHARA=y
CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
CONFIG_CRYPTO_DEV_S5P=y
CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=y
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=y
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=y
CONFIG_CRYPTO_DEV_CCP_DEBUGFS=y
CONFIG_CRYPTO_DEV_MXS_DCP=y
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
CONFIG_CRYPTO_DEV_QAT_C62X=y
CONFIG_CRYPTO_DEV_QAT_4XXX=y
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_CRYPTO_DEV_CPT=y
CONFIG_CAVIUM_CPT=y
CONFIG_CRYPTO_DEV_NITROX=y
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=y
CONFIG_CRYPTO_DEV_MARVELL=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRYPTO_DEV_OCTEONTX_CPT=y
CONFIG_CRYPTO_DEV_OCTEONTX2_CPT=y
CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y
CONFIG_CRYPTO_DEV_QCE=y
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SHA=y
CONFIG_CRYPTO_DEV_QCE_AEAD=y
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DEV_IMGTEC_HASH=y
CONFIG_CRYPTO_DEV_ROCKCHIP=y
CONFIG_CRYPTO_DEV_ZYNQMP_AES=y
CONFIG_CRYPTO_DEV_ZYNQMP_SHA3=y
CONFIG_CRYPTO_DEV_CHELSIO=y
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_BCM_SPU=y
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_HISI_SEC=y
CONFIG_CRYPTO_DEV_HISI_SEC2=y
CONFIG_CRYPTO_DEV_HISI_QM=y
CONFIG_CRYPTO_DEV_HISI_ZIP=y
CONFIG_CRYPTO_DEV_HISI_HPRE=y
CONFIG_CRYPTO_DEV_HISI_TRNG=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_CRYPTO_DEV_SA2UL=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_ECB=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU=y
CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU_HMAC_SHA224=y
CONFIG_CRYPTO_DEV_ASPEED=y
CONFIG_CRYPTO_DEV_ASPEED_DEBUG=y
CONFIG_CRYPTO_DEV_ASPEED_HACE_HASH=y
CONFIG_CRYPTO_DEV_ASPEED_HACE_CRYPTO=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE=y
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_INDIRECT_PIO=y
CONFIG_TRACE_MMIO_ACCESS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_AUDIT_COMPAT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_RESTRICTED_POOL=y
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
CONFIG_DMA_PERNUMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_DMA_MAP_BENCHMARK=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_FORCE_NR_CPUS=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_7x14=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_6x10=y
CONFIG_FONT_10x18=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_TER16x32=y
CONFIG_FONT_6x8=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
CONFIG_PARMAN=y
CONFIG_OBJAGG=y
# end of Library routines

CONFIG_GENERIC_IOREMAP=y
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=y
CONFIG_POLYNOMIAL=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_STACKTRACE_BUILD_ID=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
CONFIG_UBSAN_DIV_ZERO=y
CONFIG_UBSAN_UNREACHABLE=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
CONFIG_UBSAN_SANITIZE_ALL=y
CONFIG_TEST_UBSAN=m
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
CONFIG_NET_DEV_REFCNT_TRACKER=y
CONFIG_NET_NS_REFCNT_TRACKER=y
CONFIG_DEBUG_NET=y
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SHRINKER_DEBUG=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_HW_TAGS=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_SW_TAGS is not set
# CONFIG_KASAN_HW_TAGS is not set
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
CONFIG_KASAN_STACK=y
CONFIG_KASAN_VMALLOC=y
CONFIG_KASAN_KUNIT_TEST=y
CONFIG_KASAN_MODULE_TEST=m
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
CONFIG_KFENCE_STATIC_KEYS=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_KFENCE_KUNIT_TEST=y
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_WQ_WATCHDOG=y
CONFIG_TEST_LOCKUP=m
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_SCF_TORTURE_TEST=y
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_REF_SCALE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging

CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
CONFIG_TRACE_PREEMPT_TOGGLE=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_RECORD_RECURSION=y
CONFIG_FTRACE_RECORD_RECURSION_SIZE=128
CONFIG_RING_BUFFER_RECORD_RECURSION=y
CONFIG_GCOV_PROFILE_FTRACE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_TEST_SYSCALLS=y
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS=y
CONFIG_PREEMPTIRQ_DELAY_TEST=m
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_KPROBE_EVENT_GEN_TEST=y
CONFIG_HIST_TRIGGERS_DEBUG=y
CONFIG_DA_MON_EVENTS=y
CONFIG_DA_MON_EVENTS_IMPLICIT=y
CONFIG_DA_MON_EVENTS_ID=y
CONFIG_RV=y
CONFIG_RV_MON_WIP=y
CONFIG_RV_MON_WWNR=y
CONFIG_RV_REACTORS=y
CONFIG_RV_REACT_PRINTK=y
CONFIG_RV_REACT_PANIC=y
# CONFIG_SAMPLES is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
CONFIG_ARM64_RELOC_TEST=m
CONFIG_CORESIGHT=y
CONFIG_CORESIGHT_LINKS_AND_SINKS=y
CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
CONFIG_CORESIGHT_CATU=y
CONFIG_CORESIGHT_SINK_TPIU=y
CONFIG_CORESIGHT_SINK_ETBV10=y
CONFIG_CORESIGHT_SOURCE_ETM4X=y
CONFIG_ETM4X_IMPDEF_FEATURE=y
CONFIG_CORESIGHT_STM=y
CONFIG_CORESIGHT_CPU_DEBUG=y
CONFIG_CORESIGHT_CPU_DEBUG_DEFAULT_ON=y
CONFIG_CORESIGHT_CTI=y
CONFIG_CORESIGHT_CTI_INTEGRATION_REGS=y
CONFIG_CORESIGHT_TRBE=y
# end of arm64 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
CONFIG_KUNIT_DEFAULT_ENABLED=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=y
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_FUNCTION=y
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAIL_SUNRPC=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_CPUMASK_KUNIT_TEST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_MIN_HEAP=y
CONFIG_TEST_SORT=y
CONFIG_TEST_DIV64=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_TEST_REF_TRACKER=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_SCANF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_UUID=y
CONFIG_TEST_XARRAY=y
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_SIPHASH=y
CONFIG_TEST_IDA=y
CONFIG_TEST_PARMAN=y
CONFIG_TEST_LKM=m
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=y
CONFIG_BITFIELD_KUNIT=y
CONFIG_HASH_KUNIT_TEST=y
CONFIG_RESOURCE_KUNIT_TEST=y
CONFIG_SYSCTL_KUNIT_TEST=y
CONFIG_LIST_KUNIT_TEST=y
CONFIG_LINEAR_RANGES_TEST=y
CONFIG_CMDLINE_KUNIT_TEST=y
CONFIG_BITS_TEST=y
CONFIG_SLUB_KUNIT_TEST=y
CONFIG_RATIONAL_KUNIT_TEST=y
CONFIG_MEMCPY_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=y
CONFIG_OVERFLOW_KUNIT_TEST=y
CONFIG_STACKINIT_KUNIT_TEST=y
CONFIG_FORTIFY_KUNIT_TEST=y
CONFIG_HW_BREAKPOINT_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_DYNAMIC_DEBUG=y
CONFIG_TEST_KMOD=m
CONFIG_TEST_DEBUG_VIRTUAL=y
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_OBJAGG=y
CONFIG_TEST_MEMINIT=y
CONFIG_TEST_HMM=y
CONFIG_TEST_FREE_PAGES=y
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
CONFIG_HYPERV_TESTING=y
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking

Re: [PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000

[Melody Olvera]

On 10/14/2022 3:11 PM, Melody Olvera wrote:
> This series adds the base device tree files and DTS support for the
> Qualcomm QDU1000 and QRU1000 IDP SoCs, including the clocks, tlmm, smmu,
> regulators, mmc, interconnects, cpufreq, and qup. 
>
> This patchset is based off of [1] which adds support for the PMIC arb used
> on these SoCs.
>
> The Qualcomm Technologies, Inc. Distributed Unit 1000 and Radio Unit
> 1000 are new SoCs meant for enabling Open RAN solutions. See more at
> https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/qualcomm_5g_ran_platforms_product_brief.pdf
>
> [1] https://lore.kernel.org/all/20220914165212.3705892-3-vkoul@kernel.org/
Changes from v1:
- squashed dtsi changes and dts changes into one commit each
- changed qdru to qdu and used qru dtsi file for changes from qdu
- removed underscores from node names
- revised idle states and domain idle states
- sorted devices by addr
- removed undocumented fields
- fixed pin functions
- revised regulator node names
>
> Melody Olvera (3):
>   dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards
>   arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
>   arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
>
>  .../devicetree/bindings/arm/qcom.yaml         |   16 +
>  arch/arm64/boot/dts/qcom/Makefile             |    2 +
>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts      |  230 +++
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi         | 1646 +++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000-idp.dts      |  230 +++
>  arch/arm64/boot/dts/qcom/qru1000.dtsi         |   27 +
>  6 files changed, 2151 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>
>
> base-commit: dca0a0385a4963145593ba417e1417af88a7c18d
> prerequisite-patch-id: 5e7a02607aecd3f5346a2f450982601cf6935e54