From: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
To: Marcin Niestroj
<m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>,
Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Alessandro Zummo
<a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>,
Alexandre Belloni
<alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Dave Gerlach <d-gerlach-l0cyMroinI0@public.gmane.org>,
"Menon, Nishanth" <nm-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH] rtc: omap: Support ext_wakeup configuration
Date: Fri, 15 Apr 2016 19:46:44 +0300 [thread overview]
Message-ID: <57111AF4.6070505@ti.com> (raw)
In-Reply-To: <570D2F79.9040202-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
On 04/12/2016 08:25 PM, Marcin Niestroj wrote:
> Hi,
>
> On 08.04.2016 19:16, Grygorii Strashko wrote:
>> On 04/08/2016 06:14 PM, Tony Lindgren wrote:
>>> * Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org> [160408 03:41]:
>>>> Hi Tony,
>>>>
>>>> On 04/05/2016 01:40 AM, Tony Lindgren wrote:
>>>>> Hi,
>>>>>
>>>>> * Marcin Niestroj <m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org> [160404 08:57]:
>>>>>> Support configuration of ext_wakeup sources. This patch makes it
>>>>>> possible to enable ext_wakeup and set it's polarity, depending on
>>>>>> board
>>>>>> configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
>>>>>> notify about power-button presses. Handling power-button presses
>>>>>> enables
>>>>>> to recover from RTC-only power states correctly.
>>>>>
>>>>> I suggest you just set this pin up as a minimal gpiochip. That way
>>>>> we can use the standard binding :) And if we get lucky, this pin can
>>>>> also trigger during runtime.
>>>>>
>>>>
>>>> Following my comments on v2 of this patch I propose to rollback to
>>>> this version of the patch.
>>>>
>>>> It seems doesn't fit in gpiochip, it's more likely irqchip, but since
>>>> rtc can't generate IRQ there are nor reasons for these genetic
>>>> experiments and RTC's specific bindings looks more suitable, at
>>>> least for me.
>>>
>>> Hmm well gpiochips typically are irqchip too. IMO the generic binding
>>> here sounds like "gpio-wakeup" as it's an input with polarity and with
>>> an optional interrupt.
>>>
>>> Plain irqchip would work too in this case if there are no other GPIO
>>> specific features. Some other RTCs may have more GPIO like features.
>>>
>>> In any case, setting the ext_wakeup up as an irqchip means that the
>>> RTC controller can be used as a dedicated wakeirq with Linux :)
>>
>> It can't :( It can't generate IRQ when state of ext_wakeup line has
>> been changed.
>>
>>>
>>> Are you guys sure there's no wake pin events during runtime? AFAIK
>>> the RTCs just typically produce an interrupt when programmed to
>>> do so, they don't know the state of the SoC.
>>>
>>
>> I do not think that It can be fit in gpiochip or irqchip -
>> in my opinion right way is to proceed with bindings proposed by
>> Marcin in this patch v1.
>>
>> But, probably, it could fit in pinctrl:
>> - this is pin's configuration
>> - this is one-time configuration
>> - or - configuration which can be applied before suspend
>> and resorted after suspend.
>>
>> if you still wanna try some generic framework.
>>
>
> pinctrl bindings looks ok for our use case (enable/disable input,
> configure debounce), except I don't see any way to pass polarity
> (active low/high) to the driver.
>
Below code is just a POC that pinctrl can be used here.
It does one time configuration at boot, but more sates can be added
- sleep, poweroff:
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 13ac882..9580c82 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1248,11 +1248,40 @@
rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
- reg = <0x48838000 0x100>;
+ reg = <0x48838000 0x98>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "rtcss";
clocks = <&sys_32k_ck>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rtc_pmx: pinmux@48838098 {
+ compatible = "pinctrl-single";
+ reg = <0x48838098 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x007fffff>;
+
+ pinctrl-names = "default"/*, "sleep"*/;
+ pinctrl-0 = <&rtc_default>;
+/* pinctrl-1 = <&rtc_sleep>;*/
+
+ rtc_default: rtc_default {
+ pinctrl-single,pins = <
+ 0x0 0x000B0111
+ 0x4 0x00000004
+ >;
+ };
+/* rtc_sleep: rtc_sleep {
+ pinctrl-single,pins = <
+ 0x0 0x00000000
+ 0x4 0x00000000
+ >;
+ };*/
+ };
};
/* OCP2SCP1 */
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index ec2e9c5..28c67a4 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -428,8 +428,10 @@ static void omap_rtc_power_off(void)
rtc->type->unlock(rtc);
/* enable pmic_power_en control */
+/*
val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN);
+*/
/* set alarm two seconds from now */
omap_rtc_read_time_raw(rtc, &tm);
@@ -650,6 +652,8 @@ static int omap_rtc_probe(struct platform_device *pdev)
reg | OMAP_RTC_OSC_SEL_32KCLK_SRC);
}
+ of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+
rtc->type->lock(rtc);
device_init_wakeup(&pdev->dev, true);
--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-04-15 16:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 15:56 [PATCH] rtc: omap: Support ext_wakeup configuration Marcin Niestroj
[not found] ` <1459785403-1725-1-git-send-email-m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
2016-04-04 22:40 ` Tony Lindgren
[not found] ` <20160404224046.GA17042-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2016-04-08 10:40 ` Grygorii Strashko
[not found] ` <57078A89.3080809-l0cyMroinI0@public.gmane.org>
2016-04-08 15:14 ` Tony Lindgren
[not found] ` <20160408151408.GS16484-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2016-04-08 17:16 ` Grygorii Strashko
[not found] ` <5707E764.7050204-l0cyMroinI0@public.gmane.org>
2016-04-08 17:51 ` Tony Lindgren
[not found] ` <20160408175114.GX16484-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2016-04-09 16:42 ` Tony Lindgren
2016-04-12 17:25 ` Marcin Niestroj
[not found] ` <570D2F79.9040202-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
2016-04-15 16:46 ` Grygorii Strashko [this message]
[not found] ` <57111AF4.6070505-l0cyMroinI0@public.gmane.org>
2016-04-15 16:52 ` Nishanth Menon
[not found] ` <57111C5A.7070606-l0cyMroinI0@public.gmane.org>
2016-04-15 17:18 ` Grygorii Strashko
2016-04-26 7:39 ` Marcin Niestroj
[not found] ` <fe6ab23a-5f0d-a317-14d9-f538c3ad4052-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
2016-04-26 15:39 ` Tony Lindgren
[not found] ` <20160426153948.GR5995-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2016-06-15 8:37 ` Marcin Niestroj
[not found] ` <65595642-33fb-368b-f47f-8e62b885c0a2-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org>
2016-06-15 10:56 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57111AF4.6070505@ti.com \
--to=grygorii.strashko-l0cymroini0@public.gmane.org \
--cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
--cc=alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=d-gerlach-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=j-keerthy-l0cyMroinI0@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.niestroj-z3quKL4iOrmQ6ZAhV5LmOA@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).