From: "Andrew F. Davis" <afd@ti.com>
To: Andreas Dannenberg <dannenberg@ti.com>,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Pawel Moll <pawel.moll@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
linux-kernel@vger.kernel.org, Takashi Iwai <tiwai@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Kumar Gala <galak@codeaurora.org>
Subject: Re: [PATCH v3 2/2] ASoC: codecs: add support for TAS5720 digital amplifier
Date: Tue, 26 Apr 2016 12:19:05 -0500 [thread overview]
Message-ID: <571FA309.7080809@ti.com> (raw)
In-Reply-To: <1461615456-19510-3-git-send-email-dannenberg@ti.com>
On 04/25/2016 03:17 PM, Andreas Dannenberg wrote:
> The Texas Instruments TAS5720L/M device is a high-efficiency mono
> Class-D audio power amplifier optimized for high transient power
> capability to use the dynamic power headroom of small loudspeakers.
> Its digital time division multiplexed (TDM) interface enables up to
> 16 devices to share the same bus.
>
> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
> ---
> sound/soc/codecs/Kconfig | 10 +
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/tas5720.c | 638 +++++++++++++++++++++++++++++++++++++++++++++
> sound/soc/codecs/tas5720.h | 90 +++++++
> 4 files changed, 740 insertions(+)
> create mode 100644 sound/soc/codecs/tas5720.c
> create mode 100644 sound/soc/codecs/tas5720.h
>
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 290f921..3949dae 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -125,6 +125,7 @@ config SND_SOC_ALL_CODECS
> select SND_SOC_TAS2552 if I2C
> select SND_SOC_TAS5086 if I2C
> select SND_SOC_TAS571X if I2C
> + select SND_SOC_TAS5720 if I2C
> select SND_SOC_TFA9879 if I2C
> select SND_SOC_TLV320AIC23_I2C if I2C
> select SND_SOC_TLV320AIC23_SPI if SPI_MASTER
> @@ -748,6 +749,15 @@ config SND_SOC_TAS571X
> tristate "Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 power amplifiers"
> depends on I2C
>
> +config SND_SOC_TAS5720
> + tristate "Texas Instruments TAS5720 Mono Audio amplifier"
> + depends on I2C
> + help
> + Enable support for Texas Instruments TAS5720L/M high-efficiency mono
> + Class-D audio power amplifiers. The devices use an I2C interface for
> + setup/control and support an optional GPIO interrupt signal for fault
> + reporting.
If fault reporting is no longer interrupt based could this be re-worded?
[...]
> +
> +static struct i2c_driver tas5720_i2c_driver = {
> + .driver = {
> + .name = "tas5720",
> + .owner = THIS_MODULE,
This shouldn't be needed.
Andrew
next prev parent reply other threads:[~2016-04-26 17:19 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 20:17 [PATCH v3 0/2] ASoC: codecs: add support for TAS5720 digital amplifier Andreas Dannenberg
2016-04-25 20:17 ` [PATCH v3 1/2] ASoC: codecs: add TA5720 digital amplifier DT bindings Andreas Dannenberg
[not found] ` <1461615456-19510-2-git-send-email-dannenberg-l0cyMroinI0@public.gmane.org>
2016-04-26 15:37 ` Mark Brown
2016-04-26 16:14 ` Andreas Dannenberg
2016-04-26 16:50 ` Mark Brown
2016-04-26 17:00 ` Andreas Dannenberg
2016-04-25 20:17 ` [PATCH v3 2/2] ASoC: codecs: add support for TAS5720 digital amplifier Andreas Dannenberg
[not found] ` <1461615456-19510-3-git-send-email-dannenberg-l0cyMroinI0@public.gmane.org>
2016-04-26 15:43 ` Mark Brown
2016-04-26 16:22 ` Andreas Dannenberg
2016-04-26 17:29 ` Mark Brown
2016-04-26 18:01 ` Andreas Dannenberg
2016-05-13 11:55 ` Mark Brown
2016-05-13 14:04 ` Andreas Dannenberg
2016-04-26 17:19 ` Andrew F. Davis [this message]
2016-04-26 17:37 ` Andreas Dannenberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=571FA309.7080809@ti.com \
--to=afd@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dannenberg@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).