[PATCH v2 2/4] dt-bindings: reset: Add bindings for the Meson SoC Reset Controller

[PATCH v2 2/4] dt-bindings: reset: Add bindings for the Meson SoC Reset Controller

[Neil Armstrong]

Add DT bindings for the Meson SoC Reset Controller documentation and the
associated include file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../bindings/reset/amlogic,meson-reset.txt         |  18 ++
 .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   | 210 +++++++++++++++++++++
 include/dt-bindings/reset/amlogic,meson8b-reset.h  | 175 +++++++++++++++++
 3 files changed, 403 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
 create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
 create mode 100644 include/dt-bindings/reset/amlogic,meson8b-reset.h

diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
new file mode 100644
index 0000000..e746b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
@@ -0,0 +1,18 @@
+Amlogic Meson SoC Reset Controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset"
+- reg: should contain the register address base
+- #reset-cells: 1, see below
+
+example:
+
+reset: reset-controller {
+	compatible = "amlogic,meson-gxbb-reset";
+	reg = <0x0 0x04404 0x0 0x20>;
+	#reset-cells = <1>;
+};
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
new file mode 100644
index 0000000..524d607
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -0,0 +1,210 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+
+/*	RESET0					*/
+#define RESET_HIU			0
+/*					1	*/
+#define RESET_DOS_RESET			2
+#define RESET_DDR_TOP			3
+#define RESET_DCU_RESET			4
+#define RESET_VIU			5
+#define RESET_AIU			6
+#define RESET_VID_PLL_DIV		7
+/*					8	*/
+#define RESET_PMUX			9
+#define RESET_VENC			10
+#define RESET_ASSIST			11
+#define RESET_AFIFO2			12
+#define RESET_VCBUS			13
+/*					14	*/
+/*					15	*/
+#define RESET_GIC			16
+#define RESET_CAPB3_DECODE		17
+#define RESET_NAND_CAPB3		18
+#define RESET_HDMITX_CAPB3		19
+#define RESET_MALI_CAPB3		20
+#define RESET_DOS_CAPB3			21
+#define RESET_SYS_CPU_CAPB3		22
+#define RESET_CBUS_CAPB3		23
+#define RESET_AHB_CNTL			24
+#define RESET_AHB_DATA			25
+#define RESET_VCBUS_CLK81		26
+#define RESET_MMC			27
+#define RESET_MIPI_0			28
+#define RESET_MIPI_1			29
+#define RESET_MIPI_2			30
+#define RESET_MIPI_3			31
+/*	RESET1					*/
+#define RESET_CPPM			32
+#define RESET_DEMUX			33
+#define RESET_USB_OTG			34
+#define RESET_DDR			35
+#define RESET_AO_RESET			36
+#define RESET_BT656			37
+#define RESET_AHB_SRAM			38
+/*					39	*/
+#define RESET_PARSER			40
+#define RESET_BLKMV			41
+#define RESET_ISA			42
+#define RESET_ETHERNET			43
+#define RESET_SD_EMMC_A			44
+#define RESET_SD_EMMC_B			45
+#define RESET_SD_EMMC_C			46
+#define RESET_ROM_BOOT			47
+#define RESET_SYS_CPU_0			48
+#define RESET_SYS_CPU_1			49
+#define RESET_SYS_CPU_2			50
+#define RESET_SYS_CPU_3			51
+#define RESET_SYS_CPU_CORE_0		52
+#define RESET_SYS_CPU_CORE_1		53
+#define RESET_SYS_CPU_CORE_2		54
+#define RESET_SYS_CPU_CORE_3		55
+#define RESET_SYS_PLL_DIV		56
+#define RESET_SYS_CPU_AXI		57
+#define RESET_SYS_CPU_L2		58
+#define RESET_SYS_CPU_P			59
+#define RESET_SYS_CPU_MBIST		60
+/*					61	*/
+/*					62	*/
+/*					63	*/
+/*	RESET2					*/
+#define RESET_VD_RMEM			64
+#define RESET_AUDIN			65
+#define RESET_HDMI_TX			66
+/*					67	*/
+/*					68	*/
+/*					69	*/
+#define RESET_GE2D			70
+#define RESET_PARSER_REG		71
+#define RESET_PARSER_FETCH		72
+#define RESET_PARSER_CTL		73
+#define RESET_PARSER_TOP		74
+/*					75	*/
+/*					76	*/
+#define RESET_AO_CPU_RESET		77
+#define RESET_MALI			78
+#define RESET_HDMI_SYSTEM_RESET		79
+/*					80-95	*/
+/*	RESET3					*/
+#define RESET_RING_OSCILLATOR		96
+#define RESET_SYS_CPU			97
+#define RESET_EFUSE			98
+#define RESET_SYS_CPU_BVCI		99
+#define RESET_AIFIFO			100
+#define RESET_TVFE			101
+#define RESET_AHB_BRIDGE_CNTL		102
+/*					103	*/
+#define RESET_AUDIO_DAC			104
+#define RESET_DEMUX_TOP			105
+#define RESET_DEMUX_DES			106
+#define RESET_DEMUX_S2P_0		107
+#define RESET_DEMUX_S2P_1		108
+#define RESET_DEMUX_RESET_0		109
+#define RESET_DEMUX_RESET_1		110
+#define RESET_DEMUX_RESET_2		111
+/*					112-127	*/
+/*	RESET4					*/
+/*					128	*/
+/*					129	*/
+/*					130	*/
+/*					131	*/
+#define RESET_DVIN_RESET		132
+#define RESET_RDMA			133
+#define RESET_VENCI			134
+#define RESET_VENCP			135
+/*					136	*/
+#define RESET_VDAC			137
+#define RESET_RTC			138
+/*					139	*/
+#define RESET_VDI6			140
+#define RESET_VENCL			141
+#define RESET_I2C_MASTER_2		142
+#define RESET_I2C_MASTER_1		143
+/*					144-159	*/
+/*	RESET5					*/
+/*					160-191	*/
+/*	RESET6					*/
+#define RESET_PERIPHS_GENERAL		192
+#define RESET_PERIPHS_SPICC		193
+#define RESET_PERIPHS_SMART_CARD	194
+#define RESET_PERIPHS_SAR_ADC		195
+#define RESET_PERIPHS_I2C_MASTER_0	196
+#define RESET_SANA			197
+/*					198	*/
+#define RESET_PERIPHS_STREAM_INTERFACE	199
+#define RESET_PERIPHS_SDIO		200
+#define RESET_PERIPHS_UART_0		201
+#define RESET_PERIPHS_UART_1_2		202
+#define RESET_PERIPHS_ASYNC_0		203
+#define RESET_PERIPHS_ASYNC_1		204
+#define RESET_PERIPHS_SPI_0		205
+#define RESET_PERIPHS_SDHC		206
+#define RESET_UART_SLIP			207
+/*					208-223	*/
+/*	RESET7					*/
+#define RESET_USB_DDR_0			224
+#define RESET_USB_DDR_1			225
+#define RESET_USB_DDR_2			226
+#define RESET_USB_DDR_3			227
+/*					228	*/
+#define RESET_DEVICE_MMC_ARB		229
+/*					230	*/
+#define RESET_VID_LOCK			231
+#define RESET_A9_DMC_PIPEL		232
+/*					233-255	*/
+
+#endif
diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h
new file mode 100644
index 0000000..614aff2
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h
@@ -0,0 +1,175 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H
+
+/*	RESET0					*/
+#define RESET_HIU			0
+#define RESET_VLD			1
+#define RESET_IQIDCT			2
+#define RESET_MC			3
+/*					8	*/
+#define RESET_VIU			5
+#define RESET_AIU			6
+#define RESET_MCPU			7
+#define RESET_CCPU			8
+#define RESET_PMUX			9
+#define RESET_VENC			10
+#define RESET_ASSIST			11
+#define RESET_AFIFO2			12
+#define RESET_MDEC			13
+#define RESET_VLD_PART			14
+#define RESET_VIFIFO			15
+/*					16-31	*/
+/*	RESET1					*/
+/*					32	*/
+#define RESET_DEMUX			33
+#define RESET_USB_OTG			34
+#define RESET_DDR			35
+#define RESET_VDAC_1			36
+#define RESET_BT656			37
+#define RESET_AHB_SRAM			38
+#define RESET_AHB_BRIDGE		39
+#define RESET_PARSER			40
+#define RESET_BLKMV			41
+#define RESET_ISA			42
+#define RESET_ETHERNET			43
+#define RESET_ABUF			44
+#define RESET_AHB_DATA			45
+#define RESET_AHB_CNTL			46
+#define RESET_ROM_BOOT			47
+/*					48-63	*/
+/*	RESET2					*/
+#define RESET_VD_RMEM			64
+#define RESET_AUDIN			65
+#define RESET_DBLK			66
+#define RESET_PIC_DC			66
+#define RESET_PSC			66
+#define RESET_NAND			66
+#define RESET_GE2D			70
+#define RESET_PARSER_REG		71
+#define RESET_PARSER_FETCH		72
+#define RESET_PARSER_CTL		73
+#define RESET_PARSER_TOP		74
+#define RESET_HDMI_APB			75
+#define RESET_AUDIO_APB			76
+#define RESET_MEDIA_CPU			77
+#define RESET_MALI			78
+#define RESET_HDMI_SYSTEM_RESET		79
+/*					80-95	*/
+/*	RESET3					*/
+#define RESET_RING_OSCILLATOR		96
+#define RESET_SYS_CPU_0			97
+#define RESET_EFUSE			98
+#define RESET_SYS_CPU_BVCI		99
+#define RESET_AIFIFO			100
+#define RESET_AUDIO_PLL_MODULATOR	101
+#define RESET_AHB_BRIDGE_CNTL		102
+#define RESET_SYS_CPU_1			103
+#define RESET_AUDIO_DAC			104
+#define RESET_DEMUX_TOP			105
+#define RESET_DEMUX_DES			106
+#define RESET_DEMUX_S2P_0		107
+#define RESET_DEMUX_S2P_1		108
+#define RESET_DEMUX_RESET_0		109
+#define RESET_DEMUX_RESET_1		110
+#define RESET_DEMUX_RESET_2		111
+/*					112-127	*/
+/*	RESET4					*/
+#define RESET_PL310			128
+#define RESET_A5_APB			129
+#define RESET_A5_AXI			130
+#define RESET_A5			131
+#define RESET_DVIN			132
+#define RESET_RDMA			133
+#define RESET_VENCI			134
+#define RESET_VENCP			135
+#define RESET_VENCT			136
+#define RESET_VDAC_4			137
+#define RESET_RTC			138
+#define RESET_A5_DEBUG			139
+#define RESET_VDI6			140
+#define RESET_VENCL			141
+/*					142-159	*/
+/*	RESET5					*/
+#define RESET_DDR_PLL			160
+#define RESET_MISC_PLL			161
+#define RESET_SYS_PLL			162
+#define RESET_HPLL_PLL			163
+#define RESET_AUDIO_PLL			164
+#define RESET_VID2_PLL			165
+/*					166-191	*/
+/*	RESET6					*/
+#define RESET_PERIPHS_GENERAL		192
+#define RESET_PERIPHS_IR_REMOTE		193
+#define RESET_PERIPHS_SMART_CARD	194
+#define RESET_PERIPHS_SAR_ADC		195
+#define RESET_PERIPHS_I2C_MASTER_0	196
+#define RESET_PERIPHS_I2C_MASTER_1	197
+#define RESET_PERIPHS_I2C_SLAVE		198
+#define RESET_PERIPHS_STREAM_INTERFACE	199
+#define RESET_PERIPHS_SDIO		200
+#define RESET_PERIPHS_UART_0		201
+#define RESET_PERIPHS_UART_1		202
+#define RESET_PERIPHS_ASYNC_0		203
+#define RESET_PERIPHS_ASYNC_1		204
+#define RESET_PERIPHS_SPI_0		205
+#define RESET_PERIPHS_SPI_1		206
+#define RESET_PERIPHS_LED_PWM		207
+/*					208-223	*/
+/*	RESET7					*/
+/*					224-255	*/
+
+#endif
-- 
2.7.0

[PATCH v2 3/4] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms

[Neil Armstrong]

Update DTSI file to add the reset controller node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 832815d..45e9c55 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -43,6 +43,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
@@ -129,6 +130,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x20>;
+				#reset-cells = <1>;
+			};
+
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x084c0 0x0 0x14>;
-- 
2.7.0

[PATCH v2 4/4] ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms

[Neil Armstrong]

Update DTSI file to add the reset controller node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/boot/dts/meson8b.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2bfe401..fc4080d 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -46,6 +46,7 @@
 
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include "skeleton.dtsi"
 
 / {
@@ -105,6 +106,12 @@
 			#interrupt-cells = <3>;
 		};
 
+		reset: reset-controller@c1104404 {
+			compatible = "amlogic,meson8b-reset";
+			reg = <0xc1104404 0x20>;
+			#reset-cells = <1>;
+		};
+
 		wdt: watchdog@c1109900 {
 			compatible = "amlogic,meson8b-wdt";
 			reg = <0xc1109900 0x8>;
-- 
2.7.0

Re: [PATCH v2 2/4] dt-bindings: reset: Add bindings for the Meson SoC Reset Controller

[Rob Herring]

On Wed, May 25, 2016 at 11:49:16AM +0200, Neil Armstrong wrote:
> Add DT bindings for the Meson SoC Reset Controller documentation and the
> associated include file.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../bindings/reset/amlogic,meson-reset.txt         |  18 ++
>  .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   | 210 +++++++++++++++++++++
>  include/dt-bindings/reset/amlogic,meson8b-reset.h  | 175 +++++++++++++++++
>  3 files changed, 403 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
>  create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
>  create mode 100644 include/dt-bindings/reset/amlogic,meson8b-reset.h

Please add acks when posting new versions.

Rob

Re: [PATCH v2 2/4] dt-bindings: reset: Add bindings for the Meson SoC Reset Controller

[Neil Armstrong]

On 05/25/2016 09:10 PM, Rob Herring wrote:
> On Wed, May 25, 2016 at 11:49:16AM +0200, Neil Armstrong wrote:
>> Add DT bindings for the Meson SoC Reset Controller documentation and the
>> associated include file.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  .../bindings/reset/amlogic,meson-reset.txt         |  18 ++
>>  .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   | 210 +++++++++++++++++++++
>>  include/dt-bindings/reset/amlogic,meson8b-reset.h  | 175 +++++++++++++++++
>>  3 files changed, 403 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
>>  create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
>>  create mode 100644 include/dt-bindings/reset/amlogic,meson8b-reset.h
> 
> Please add acks when posting new versions.
> 
> Rob
> 

Hi Rob,

Actually I made a lot of changes here since I added support for the meson8b.
I asked myself if I could carry your ack actually...

If the ack is still valid, I'll won't forget it for v4.

Thanks,
Neil