From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Zhong Subject: Re: [v1 PATCH 1/4] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Date: Wed, 8 Jun 2016 09:38:33 +0800 Message-ID: <57577719.9020400@rock-chips.com> References: <1464966911-18949-1-git-send-email-zyw@rock-chips.com> <1464966911-18949-2-git-send-email-zyw@rock-chips.com> <20160606142738.GA12472@rob-hp-laptop> <57561653.9060404@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring Cc: Doug Anderson , Tomasz Figa , =?UTF-8?Q?Heiko_St=c3=bcbner?= , =?UTF-8?B?5aea5pm65oOF?= , "open list:ARM/Rockchip SoC..." , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" List-Id: devicetree@vger.kernel.org Hi Rob On 06/07/2016 09:46 PM, Rob Herring wrote: > On Mon, Jun 6, 2016 at 7:33 PM, Chris Zhong wrote: >> Hi Rob >> >> >> On 06/06/2016 10:27 PM, Rob Herring wrote: >>> On Fri, Jun 03, 2016 at 11:15:08PM +0800, Chris Zhong wrote: >>>> This patch adds a binding that describes the Rockchip USB Type-C PHY >>>> for rk3399 >>>> >>>> Signed-off-by: Chris Zhong >>>> >>>> --- >>>> >>>> Changes in v1: >>>> - add extcon node description >>>> - move the registers in phy driver >>>> - remove the suffix of reset >>>> >>>> .../devicetree/bindings/phy/phy-rockchip-typec.txt | 46 >>>> ++++++++++++++++++++++ >>>> 1 file changed, 46 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >>>> >>>> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >>>> b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >>>> new file mode 100644 >>>> index 0000000..964e0f7 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt >>>> @@ -0,0 +1,46 @@ >>>> +* ROCKCHIP type-c PHY >>>> +--------------------- >>>> + >>>> +Required properties: >>>> + - compatible: should be "rockchip,rk3399-typec-phy0" or >>>> + "rockchip,rk3399-typec-phy1" >>> What's the difference between 0 and 1? If it is to handle the register >>> offsets you have in the previous version and the phy blocks are >>> identical, then the compatible strings should be the same. >> yes, the registers are different between 0 and 1, and there is a grf >> register(0x6268) for switch the phy 0 and phy 1 > But GRF is in a separate block and not part of the phy, right? > > Rob The GRF is not a single function block, it contain many registers to control other block. For Type-c phy, the type-c orientation, phy select, and some phy status registers are embedded in GRF So the GRF is registered for a syscon driver, the phy driver call regmap to access the registers. > > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html