devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Keerthy <a0393675@ti.com>
To: Lee Jones <lee.jones@linaro.org>, Keerthy <j-keerthy@ti.com>
Cc: broonie@kernel.org, tony@atomide.com, robh+dt@kernel.org,
	mark.rutland@arm.com, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers
Date: Wed, 8 Jun 2016 21:41:40 +0530	[thread overview]
Message-ID: <575843BC.3090004@ti.com> (raw)
In-Reply-To: <20160608155136.GC14888@dell>



On Wednesday 08 June 2016 09:21 PM, Lee Jones wrote:
> On Fri, 13 May 2016, Keerthy wrote:
>
>> Add information for the mfd and regulator drivers.
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v3:
>>
>>    * Changed the example node lable to pmic from lp8733.
>>
>>   Documentation/devicetree/bindings/mfd/lp873x.txt | 55 ++++++++++++++++++++++++
>>   1 file changed, 55 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
>> new file mode 100644
>> index 0000000..8f3ef0d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
>> @@ -0,0 +1,55 @@
>> +TI LP3943 MFD driver
>> +
>> +Required properties:
>> +  - compatible: "ti,lp8732", "ti,lp8733"
>> +  - reg: I2C slave address.
>> +
>> +For the lp873x regulator properties please refer to:
>> +../bindings/regulator/lp873x.txt
>
> What else does the LP3943 consist of apart from regulators?

A bunch of GPOs in addition to regulators.

>
>> +Example:
>> +
>> +pmic: lp8733@60 {
>> +	compatible = "ti,lp8733";
>> +	reg = <0x60>;
>> +
>> +	regulators {
>> +		lp8733_buck0: buck0 {
>> +			regulator-name = "lp8733-buck0";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1400000>;
>> +			regulator-min-microamp = <1500000>;
>> +			regulator-max-microamp = <4000000>;
>> +			regulator-ramp-delay = <10000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +		};
>> +
>> +		lp8733_buck1: buck1 {
>> +			regulator-name = "lp8733-buck1";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <1400000>;
>> +			regulator-min-microamp = <1500000>;
>> +			regulator-max-microamp = <4000000>;
>> +			regulator-ramp-delay = <10000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		lp8733_ldo0: ldo0 {
>> +			regulator-name = "lp8733-ldo0";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <3000000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		lp8733_ldo1: ldo1 {
>> +			regulator-name = "lp8733-ldo1";
>> +			regulator-min-microvolt = <800000>;
>> +			regulator-max-microvolt = <3000000>;
>> +			regulator-always-on;
>> +			regulator-boot-on;
>> +		};
>> +	};
>> +};
>

  reply	other threads:[~2016-06-08 16:11 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-13  3:48 [PATCH v3 0/2] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-05-13  3:48 ` [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers Keerthy
2016-06-08 15:51   ` Lee Jones
2016-06-08 16:11     ` Keerthy [this message]
2016-05-13  3:48 ` [PATCH v3 2/2] mfd: lp873x: Add lp873x PMIC support Keerthy
     [not found]   ` <1463111290-12377-3-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2016-05-17 10:31     ` Keerthy
     [not found]       ` <573AF306.5040700-l0cyMroinI0@public.gmane.org>
2016-05-17 10:49         ` Lee Jones
2016-06-06  3:36           ` Keerthy
2016-06-06  8:55             ` Lee Jones
2016-06-06  9:33               ` Keerthy
2016-06-08 16:11     ` Lee Jones
2016-06-08 16:17       ` Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=575843BC.3090004@ti.com \
    --to=a0393675@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).