Re: [PATCH v3 08/15] mmc: sdhci-of-arasan: Properly set corecfg_baseclkfreq on rk3399

[Adrian Hunter <adrian.hunter@intel.com>]

On 20/06/16 20:56, Douglas Anderson wrote:
> In the the earlier change in this series ("Documentation: mmc:
> sdhci-of-arasan: Add soc-ctl-syscon for corecfg regs") we can see the
> mechansim for specifying a syscon to properly set corecfg registers in
> sdhci-of-arasan.  Now let's use this mechanism to properly set
> corecfg_baseclkfreq on rk3399.
> 
>>From [1] the corecfg_baseclkfreq is supposed to be set to:
>   Base Clock Frequency for SD Clock.
>   This is the frequency of the xin_clk.
> 
> This is a relatively easy thing to do.  Note that we assume that xin_clk
> is not dynamic and we can check the clock at probe time.  If any real
> devices have a dynamic xin_clk future patches could register for
> notifiers for the clock.
> 
> At the moment, setting corecfg_baseclkfreq is only supported for rk3399
> since we need a specific map for each implementation.  The code is
> written in a generic way that should make this easy to extend to other
> SoCs.  Note that a specific compatible string for rk3399 is already in
> use and so we add that to the table to match rk3399.
> 
> [1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>