[PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Stephan Linz]

Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Nico Macrionitis <acrux@cruxppc.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Stephan Linz <linz@li-pro.net>
---
 Documentation/devicetree/bindings/leds/common.txt    | 2 +-
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 +-
 Documentation/laptops/asus-laptop.txt                | 2 +-
 Documentation/leds/leds-class.txt                    | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..1e97169 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -26,7 +26,7 @@ Optional properties for child nodes:
      "default-on" - LED will turn on (but for leds-gpio see "default-state"
 		    property in Documentation/devicetree/bindings/gpio/led.txt)
      "heartbeat" - LED "double" flashes at a load average based rate
-     "ide-disk" - LED indicates disk activity
+     "disk-activity" - LED indicates disk activity
      "timer" - LED flashes at a fixed, configurable rate
 
 - led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..e166053 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -35,7 +35,7 @@ leds {
 	hdd {
 		label = "IDE Activity";
 		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "ide-disk";
+		linux,default-trigger = "disk-activity";
 	};
 
 	fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
     echo 1 >  /sys/class/leds/asus::mail/brightness
   will switch the mail LED on.
   You can also know if they are on/off by reading their content and use
-  kernel triggers like ide-disk or heartbeat.
+  kernel triggers like disk-activity or heartbeat.
 
 Backlight
 ---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index d406d98..44c1bcf 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
 The class also introduces the optional concept of an LED trigger. A trigger
 is a kernel based source of led events. Triggers can either be simple or
 complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
 nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
 optimises away.
 
-- 
2.8.4

Re: [PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Mark Rutland]

On Thu, Jun 09, 2016 at 12:29:37AM +0200, Stephan Linz wrote:
> Cc: Joseph Jezak <josejx@gentoo.org>
> Cc: Nico Macrionitis <acrux@cruxppc.org>
> Cc: Jörg Sommer <joerg@alea.gnuu.de>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> ---
>  Documentation/devicetree/bindings/leds/common.txt    | 2 +-
>  Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 +-
>  Documentation/laptops/asus-laptop.txt                | 2 +-
>  Documentation/leds/leds-class.txt                    | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index af10678..1e97169 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -26,7 +26,7 @@ Optional properties for child nodes:
>       "default-on" - LED will turn on (but for leds-gpio see "default-state"
>  		    property in Documentation/devicetree/bindings/gpio/led.txt)
>       "heartbeat" - LED "double" flashes at a load average based rate
> -     "ide-disk" - LED indicates disk activity
> +     "disk-activity" - LED indicates disk activity
>       "timer" - LED flashes at a fixed, configurable rate

We should not break the binding.

Code must continue to support "ide-disk", though we can mark it
deprecated in the binding documentation, and update the in-kernel dts
files to use "disk-activity".

Thanks,
Mark.

Re: [PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Jacek Anaszewski]

On 06/21/2016 05:05 PM, Mark Rutland wrote:
> On Thu, Jun 09, 2016 at 12:29:37AM +0200, Stephan Linz wrote:
>> Cc: Joseph Jezak <josejx@gentoo.org>
>> Cc: Nico Macrionitis <acrux@cruxppc.org>
>> Cc: Jörg Sommer <joerg@alea.gnuu.de>
>> Signed-off-by: Stephan Linz <linz@li-pro.net>
>> ---
>>   Documentation/devicetree/bindings/leds/common.txt    | 2 +-
>>   Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 +-
>>   Documentation/laptops/asus-laptop.txt                | 2 +-
>>   Documentation/leds/leds-class.txt                    | 2 +-
>>   4 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
>> index af10678..1e97169 100644
>> --- a/Documentation/devicetree/bindings/leds/common.txt
>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>> @@ -26,7 +26,7 @@ Optional properties for child nodes:
>>        "default-on" - LED will turn on (but for leds-gpio see "default-state"
>>   		    property in Documentation/devicetree/bindings/gpio/led.txt)
>>        "heartbeat" - LED "double" flashes at a load average based rate
>> -     "ide-disk" - LED indicates disk activity
>> +     "disk-activity" - LED indicates disk activity
>>        "timer" - LED flashes at a fixed, configurable rate
>
> We should not break the binding.
>
> Code must continue to support "ide-disk", though we can mark it
> deprecated in the binding documentation, and update the in-kernel dts
> files to use "disk-activity".

The code in the version 4 of the patchset supports also "ide-disk".

Stephan, could you send a new version of this patch, with preserved
"ide-disk" property, marked as deprecated?

-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Mark Rutland]

On Wed, Jun 22, 2016 at 09:55:43AM +0200, Jacek Anaszewski wrote:
> On 06/21/2016 05:05 PM, Mark Rutland wrote:
> >On Thu, Jun 09, 2016 at 12:29:37AM +0200, Stephan Linz wrote:
> >>Cc: Joseph Jezak <josejx@gentoo.org>
> >>Cc: Nico Macrionitis <acrux@cruxppc.org>
> >>Cc: Jörg Sommer <joerg@alea.gnuu.de>
> >>Signed-off-by: Stephan Linz <linz@li-pro.net>
> >>---
> >>  Documentation/devicetree/bindings/leds/common.txt    | 2 +-
> >>  Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 +-
> >>  Documentation/laptops/asus-laptop.txt                | 2 +-
> >>  Documentation/leds/leds-class.txt                    | 2 +-
> >>  4 files changed, 4 insertions(+), 4 deletions(-)
> >>
> >>diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> >>index af10678..1e97169 100644
> >>--- a/Documentation/devicetree/bindings/leds/common.txt
> >>+++ b/Documentation/devicetree/bindings/leds/common.txt
> >>@@ -26,7 +26,7 @@ Optional properties for child nodes:
> >>       "default-on" - LED will turn on (but for leds-gpio see "default-state"
> >>  		    property in Documentation/devicetree/bindings/gpio/led.txt)
> >>       "heartbeat" - LED "double" flashes at a load average based rate
> >>-     "ide-disk" - LED indicates disk activity
> >>+     "disk-activity" - LED indicates disk activity
> >>       "timer" - LED flashes at a fixed, configurable rate
> >
> >We should not break the binding.
> >
> >Code must continue to support "ide-disk", though we can mark it
> >deprecated in the binding documentation, and update the in-kernel dts
> >files to use "disk-activity".
> 
> The code in the version 4 of the patchset supports also "ide-disk".

Ah, sorry, I missed v4.

> Stephan, could you send a new version of this patch, with preserved
> "ide-disk" property, marked as deprecated?

With that, feel free to add:

Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks,
Mark.

Re: [PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Stephan Linz]

[-- Attachment #1.1: Type: text/plain, Size: 2023 bytes --]

Hi Jacek,

Am 22.06.2016 um 09:55 schrieb Jacek Anaszewski:
> On 06/21/2016 05:05 PM, Mark Rutland wrote:
>> On Thu, Jun 09, 2016 at 12:29:37AM +0200, Stephan Linz wrote:
>>> Cc: Joseph Jezak <josejx@gentoo.org>
>>> Cc: Nico Macrionitis <acrux@cruxppc.org>
>>> Cc: Jörg Sommer <joerg@alea.gnuu.de>
>>> Signed-off-by: Stephan Linz <linz@li-pro.net>
>>> ---
>>>   Documentation/devicetree/bindings/leds/common.txt    | 2 +-
>>>   Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 +-
>>>   Documentation/laptops/asus-laptop.txt                | 2 +-
>>>   Documentation/leds/leds-class.txt                    | 2 +-
>>>   4 files changed, 4 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/leds/common.txt
>>> b/Documentation/devicetree/bindings/leds/common.txt
>>> index af10678..1e97169 100644
>>> --- a/Documentation/devicetree/bindings/leds/common.txt
>>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>>> @@ -26,7 +26,7 @@ Optional properties for child nodes:
>>>        "default-on" - LED will turn on (but for leds-gpio see
>>> "default-state"
>>>               property in
>>> Documentation/devicetree/bindings/gpio/led.txt)
>>>        "heartbeat" - LED "double" flashes at a load average based rate
>>> -     "ide-disk" - LED indicates disk activity
>>> +     "disk-activity" - LED indicates disk activity
>>>        "timer" - LED flashes at a fixed, configurable rate
>>
>> We should not break the binding.
>>
>> Code must continue to support "ide-disk", though we can mark it
>> deprecated in the binding documentation, and update the in-kernel dts
>> files to use "disk-activity".
> 
> The code in the version 4 of the patchset supports also "ide-disk".
> 
> Stephan, could you send a new version of this patch, with preserved
> "ide-disk" property, marked as deprecated?

Yes, I can. I'll submit a new v5 patch set. You can pick out then the
right patch for the LED for-next branch, okay?


br,
Stephan

> 


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v3 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Jacek Anaszewski]

On 06/22/2016 06:05 PM, Stephan Linz wrote:
> Hi Jacek,
>
> Am 22.06.2016 um 09:55 schrieb Jacek Anaszewski:
>> On 06/21/2016 05:05 PM, Mark Rutland wrote:
>>> On Thu, Jun 09, 2016 at 12:29:37AM +0200, Stephan Linz wrote:
>>>> Cc: Joseph Jezak <josejx@gentoo.org>
>>>> Cc: Nico Macrionitis <acrux@cruxppc.org>
>>>> Cc: Jörg Sommer <joerg@alea.gnuu.de>
>>>> Signed-off-by: Stephan Linz <linz@li-pro.net>
>>>> ---
>>>>    Documentation/devicetree/bindings/leds/common.txt    | 2 +-
>>>>    Documentation/devicetree/bindings/leds/leds-gpio.txt | 2 +-
>>>>    Documentation/laptops/asus-laptop.txt                | 2 +-
>>>>    Documentation/leds/leds-class.txt                    | 2 +-
>>>>    4 files changed, 4 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/leds/common.txt
>>>> b/Documentation/devicetree/bindings/leds/common.txt
>>>> index af10678..1e97169 100644
>>>> --- a/Documentation/devicetree/bindings/leds/common.txt
>>>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>>>> @@ -26,7 +26,7 @@ Optional properties for child nodes:
>>>>         "default-on" - LED will turn on (but for leds-gpio see
>>>> "default-state"
>>>>                property in
>>>> Documentation/devicetree/bindings/gpio/led.txt)
>>>>         "heartbeat" - LED "double" flashes at a load average based rate
>>>> -     "ide-disk" - LED indicates disk activity
>>>> +     "disk-activity" - LED indicates disk activity
>>>>         "timer" - LED flashes at a fixed, configurable rate
>>>
>>> We should not break the binding.
>>>
>>> Code must continue to support "ide-disk", though we can mark it
>>> deprecated in the binding documentation, and update the in-kernel dts
>>> files to use "disk-activity".
>>
>> The code in the version 4 of the patchset supports also "ide-disk".
>>
>> Stephan, could you send a new version of this patch, with preserved
>> "ide-disk" property, marked as deprecated?
>
> Yes, I can. I'll submit a new v5 patch set. You can pick out then the
> right patch for the LED for-next branch, okay?

You don't need to submit whole patch set, only the affected patch.

-- 
Best regards,
Jacek Anaszewski

[PATCH v5] leds: documentation: 'ide-disk' to 'disk-activity'

[Stephan Linz]

Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
---
Changes in v5:
  - Keep documentation for the old 'ide-disk' device tree
    binding, but mark as deprecated and refer to the new
    trigger 'disk-activity'.

Changes in v4:
  - Keep the 'ide-disk' trigger and add a second one
    for 'disk-activity'.

Changes in v3:
  - Port to kernel 4.x
  - Split into platform independent and dependent parts.

v2: https://patchwork.ozlabs.org/patch/117485/
v1: http://dev.gentoo.org/~josejx/ata.patch
---
 Documentation/devicetree/bindings/leds/common.txt    | 5 ++++-
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
 Documentation/laptops/asus-laptop.txt                | 2 +-
 Documentation/leds/leds-class.txt                    | 2 +-
 4 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..1c32e31 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -25,8 +25,11 @@ Optional properties for child nodes:
 		   system
      "default-on" - LED will turn on (but for leds-gpio see "default-state"
 		    property in Documentation/devicetree/bindings/gpio/led.txt)
+     "disk-activity" - LED indicates disk activity, the old name "ide-disk" is
+                       still valid for backward compatibility
      "heartbeat" - LED "double" flashes at a load average based rate
-     "ide-disk" - LED indicates disk activity
+     "ide-disk" - LED indicates IDE disk activity (deprecated), do not use for
+                  new implementation, use the new "disk-activity" name instead
      "timer" - LED flashes at a fixed, configurable rate
 
 - led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..5b1b43a 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
 leds {
 	compatible = "gpio-leds";
 	hdd {
-		label = "IDE Activity";
+		label = "Disk Activity";
 		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "ide-disk";
+		linux,default-trigger = "disk-activity";
 	};
 
 	fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
     echo 1 >  /sys/class/leds/asus::mail/brightness
   will switch the mail LED on.
   You can also know if they are on/off by reading their content and use
-  kernel triggers like ide-disk or heartbeat.
+  kernel triggers like disk-activity or heartbeat.
 
 Backlight
 ---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 44f5e6b..f1f7ec9 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
 The class also introduces the optional concept of an LED trigger. A trigger
 is a kernel based source of led events. Triggers can either be simple or
 complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
 nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
 optimises away.
 
-- 
2.9.0

Re: [PATCH v5] leds: documentation: 'ide-disk' to 'disk-activity'

[Jacek Anaszewski]

Hi Stephan,

On 06/23/2016 09:38 PM, Stephan Linz wrote:
> Cc: Joseph Jezak <josejx@gentoo.org>
> Cc: Jörg Sommer <joerg@alea.gnuu.de>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
> ---
> Changes in v5:
>    - Keep documentation for the old 'ide-disk' device tree
>      binding, but mark as deprecated and refer to the new
>      trigger 'disk-activity'.
>
> Changes in v4:
>    - Keep the 'ide-disk' trigger and add a second one
>      for 'disk-activity'.
>
> Changes in v3:
>    - Port to kernel 4.x
>    - Split into platform independent and dependent parts.
>
> v2: https://patchwork.ozlabs.org/patch/117485/
> v1: http://dev.gentoo.org/~josejx/ata.patch
> ---
>   Documentation/devicetree/bindings/leds/common.txt    | 5 ++++-
>   Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
>   Documentation/laptops/asus-laptop.txt                | 2 +-
>   Documentation/leds/leds-class.txt                    | 2 +-
>   4 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index af10678..1c32e31 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -25,8 +25,11 @@ Optional properties for child nodes:
>   		   system
>        "default-on" - LED will turn on (but for leds-gpio see "default-state"
>   		    property in Documentation/devicetree/bindings/gpio/led.txt)
> +     "disk-activity" - LED indicates disk activity, the old name "ide-disk" is
> +                       still valid for backward compatibility
>        "heartbeat" - LED "double" flashes at a load average based rate
> -     "ide-disk" - LED indicates disk activity
> +     "ide-disk" - LED indicates IDE disk activity (deprecated), do not use for
> +                  new implementation, use the new "disk-activity" name instead

I'd like to reorganize this change.

I think that the two affected properties should be placed next to
each other. I'd also remove the remark about ide-disk at disk-activity,
since we're leaving ide-disk, with added reference to disk-activity.

How about following:

+     "disk-activity" - LED indicates disk activity
-     "ide-disk" - LED indicates disk activity
+     "ide-disk" - LED indicates IDE disk activity (deprecated),
                    in new implementations use "disk-activity"

>        "timer" - LED flashes at a fixed, configurable rate
>
>   - led-max-microamp : Maximum LED supply current in microamperes. This property
> diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> index cbbeb18..5b1b43a 100644
> --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> @@ -33,9 +33,9 @@ Examples:
>   leds {
>   	compatible = "gpio-leds";
>   	hdd {
> -		label = "IDE Activity";
> +		label = "Disk Activity";
>   		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
> -		linux,default-trigger = "ide-disk";
> +		linux,default-trigger = "disk-activity";
>   	};
>
>   	fault {
> diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
> index 79a1bc6..5f28587 100644
> --- a/Documentation/laptops/asus-laptop.txt
> +++ b/Documentation/laptops/asus-laptop.txt
> @@ -72,7 +72,7 @@ LEDs
>       echo 1 >  /sys/class/leds/asus::mail/brightness
>     will switch the mail LED on.
>     You can also know if they are on/off by reading their content and use
> -  kernel triggers like ide-disk or heartbeat.
> +  kernel triggers like disk-activity or heartbeat.
>
>   Backlight
>   ---------
> diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
> index 44f5e6b..f1f7ec9 100644
> --- a/Documentation/leds/leds-class.txt
> +++ b/Documentation/leds/leds-class.txt
> @@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
>   The class also introduces the optional concept of an LED trigger. A trigger
>   is a kernel based source of led events. Triggers can either be simple or
>   complex. A simple trigger isn't configurable and is designed to slot into
> -existing subsystems with minimal additional code. Examples are the ide-disk,
> +existing subsystems with minimal additional code. Examples are the disk-activity,
>   nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
>   optimises away.
>
>


-- 
Best regards,
Jacek Anaszewski

Re: [PATCH v5] leds: documentation: 'ide-disk' to 'disk-activity'

[Stephan Linz]

[-- Attachment #1.1: Type: text/plain, Size: 5111 bytes --]

Hi Jacek,

thanks for your help. The new patch is on the way (v6).


br,
Stephan

Am 24.06.2016 um 08:50 schrieb Jacek Anaszewski:
> Hi Stephan,
> 
> On 06/23/2016 09:38 PM, Stephan Linz wrote:
>> Cc: Joseph Jezak <josejx@gentoo.org>
>> Cc: Jörg Sommer <joerg@alea.gnuu.de>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Signed-off-by: Stephan Linz <linz@li-pro.net>
>> Acked-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
>> ---
>> Changes in v5:
>>    - Keep documentation for the old 'ide-disk' device tree
>>      binding, but mark as deprecated and refer to the new
>>      trigger 'disk-activity'.
>>
>> Changes in v4:
>>    - Keep the 'ide-disk' trigger and add a second one
>>      for 'disk-activity'.
>>
>> Changes in v3:
>>    - Port to kernel 4.x
>>    - Split into platform independent and dependent parts.
>>
>> v2: https://patchwork.ozlabs.org/patch/117485/
>> v1: http://dev.gentoo.org/~josejx/ata.patch
>> ---
>>   Documentation/devicetree/bindings/leds/common.txt    | 5 ++++-
>>   Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
>>   Documentation/laptops/asus-laptop.txt                | 2 +-
>>   Documentation/leds/leds-class.txt                    | 2 +-
>>   4 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/common.txt
>> b/Documentation/devicetree/bindings/leds/common.txt
>> index af10678..1c32e31 100644
>> --- a/Documentation/devicetree/bindings/leds/common.txt
>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>> @@ -25,8 +25,11 @@ Optional properties for child nodes:
>>              system
>>        "default-on" - LED will turn on (but for leds-gpio see
>> "default-state"
>>               property in Documentation/devicetree/bindings/gpio/led.txt)
>> +     "disk-activity" - LED indicates disk activity, the old name
>> "ide-disk" is
>> +                       still valid for backward compatibility
>>        "heartbeat" - LED "double" flashes at a load average based rate
>> -     "ide-disk" - LED indicates disk activity
>> +     "ide-disk" - LED indicates IDE disk activity (deprecated), do
>> not use for
>> +                  new implementation, use the new "disk-activity"
>> name instead
> 
> I'd like to reorganize this change.
> 
> I think that the two affected properties should be placed next to
> each other. I'd also remove the remark about ide-disk at disk-activity,
> since we're leaving ide-disk, with added reference to disk-activity.
> 
> How about following:
> 
> +     "disk-activity" - LED indicates disk activity
> -     "ide-disk" - LED indicates disk activity
> +     "ide-disk" - LED indicates IDE disk activity (deprecated),
>                    in new implementations use "disk-activity"
> 
>>        "timer" - LED flashes at a fixed, configurable rate
>>
>>   - led-max-microamp : Maximum LED supply current in microamperes.
>> This property
>> diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt
>> b/Documentation/devicetree/bindings/leds/leds-gpio.txt
>> index cbbeb18..5b1b43a 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
>> @@ -33,9 +33,9 @@ Examples:
>>   leds {
>>       compatible = "gpio-leds";
>>       hdd {
>> -        label = "IDE Activity";
>> +        label = "Disk Activity";
>>           gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
>> -        linux,default-trigger = "ide-disk";
>> +        linux,default-trigger = "disk-activity";
>>       };
>>
>>       fault {
>> diff --git a/Documentation/laptops/asus-laptop.txt
>> b/Documentation/laptops/asus-laptop.txt
>> index 79a1bc6..5f28587 100644
>> --- a/Documentation/laptops/asus-laptop.txt
>> +++ b/Documentation/laptops/asus-laptop.txt
>> @@ -72,7 +72,7 @@ LEDs
>>       echo 1 >  /sys/class/leds/asus::mail/brightness
>>     will switch the mail LED on.
>>     You can also know if they are on/off by reading their content and use
>> -  kernel triggers like ide-disk or heartbeat.
>> +  kernel triggers like disk-activity or heartbeat.
>>
>>   Backlight
>>   ---------
>> diff --git a/Documentation/leds/leds-class.txt
>> b/Documentation/leds/leds-class.txt
>> index 44f5e6b..f1f7ec9 100644
>> --- a/Documentation/leds/leds-class.txt
>> +++ b/Documentation/leds/leds-class.txt
>> @@ -11,7 +11,7 @@ brightness support so will just be turned on for
>> non-zero brightness settings.
>>   The class also introduces the optional concept of an LED trigger. A
>> trigger
>>   is a kernel based source of led events. Triggers can either be
>> simple or
>>   complex. A simple trigger isn't configurable and is designed to slot
>> into
>> -existing subsystems with minimal additional code. Examples are the
>> ide-disk,
>> +existing subsystems with minimal additional code. Examples are the
>> disk-activity,
>>   nand-disk and sharpsl-charge triggers. With led triggers disabled,
>> the code
>>   optimises away.
>>
>>
> 
> 


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH v3 3/7] powerpc: use the new LED disk activity trigger

[Stephan Linz]

- dts: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'ADB_PMU_LED_IDE' to 'ADB_PMU_LED_DISK'

Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Nico Macrionitis <acrux@cruxppc.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Stephan Linz <linz@li-pro.net>
---
 arch/powerpc/boot/dts/mpc8315erdb.dts |  2 +-
 arch/powerpc/boot/dts/mpc8377_rdb.dts |  2 +-
 arch/powerpc/boot/dts/mpc8378_rdb.dts |  2 +-
 arch/powerpc/boot/dts/mpc8379_rdb.dts |  2 +-
 arch/powerpc/configs/pmac32_defconfig |  2 +-
 arch/powerpc/configs/ppc6xx_defconfig |  2 +-
 drivers/macintosh/Kconfig             | 13 ++++++-------
 drivers/macintosh/via-pmu-led.c       |  4 ++--
 8 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 4354684..ca5139e 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -472,7 +472,7 @@
 
 		hdd {
 			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 2b4b653..e326139 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -496,7 +496,7 @@
 
 		hdd {
 			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 74b6a53..71842fc 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -480,7 +480,7 @@
 
 		hdd {
 			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 3b5cbac..e442a29 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -446,7 +446,7 @@
 
 		hdd {
 			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8705f..3f6c9a6 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -158,7 +158,7 @@ CONFIG_ADB=y
 CONFIG_ADB_CUDA=y
 CONFIG_ADB_PMU=y
 CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_ADB_PMU_LED_DISK=y
 CONFIG_PMAC_APM_EMU=m
 CONFIG_PMAC_MEDIABAY=y
 CONFIG_PMAC_BACKLIGHT=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 99ccbeba..1dde0be 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -442,7 +442,7 @@ CONFIG_ADB=y
 CONFIG_ADB_CUDA=y
 CONFIG_ADB_PMU=y
 CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_ADB_PMU_LED_DISK=y
 CONFIG_PMAC_APM_EMU=y
 CONFIG_PMAC_MEDIABAY=y
 CONFIG_PMAC_BACKLIGHT=y
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3e8b29e..d28690f 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -96,19 +96,18 @@ config ADB_PMU_LED
 	  Support the front LED on Power/iBooks as a generic LED that can
 	  be triggered by any of the supported triggers. To get the
 	  behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
-	  and the ide-disk LED trigger and configure appropriately through
-	  sysfs.
+	  and the disk LED trigger and configure appropriately through sysfs.
 
-config ADB_PMU_LED_IDE
-	bool "Use front LED as IDE LED by default"
+config ADB_PMU_LED_DISK
+	bool "Use front LED as DISK LED by default"
 	depends on ADB_PMU_LED
 	depends on LEDS_CLASS
 	depends on IDE_GD_ATA
 	select LEDS_TRIGGERS
-	select LEDS_TRIGGER_IDE_DISK
+	select LEDS_TRIGGER_DISK
 	help
-	  This option makes the front LED default to the IDE trigger
-	  so that it blinks on IDE activity.
+	  This option makes the front LED default to the disk trigger
+	  so that it blinks on disk activity.
 
 config PMAC_SMU
 	bool "Support for SMU  based PowerMacs"
diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
index 19c3718..ae067ab 100644
--- a/drivers/macintosh/via-pmu-led.c
+++ b/drivers/macintosh/via-pmu-led.c
@@ -73,8 +73,8 @@ static void pmu_led_set(struct led_classdev *led_cdev,
 
 static struct led_classdev pmu_led = {
 	.name = "pmu-led::front",
-#ifdef CONFIG_ADB_PMU_LED_IDE
-	.default_trigger = "ide-disk",
+#ifdef CONFIG_ADB_PMU_LED_DISK
+	.default_trigger = "disk-activity",
 #endif
 	.brightness_set = pmu_led_set,
 };
-- 
2.8.4

[PATCH v3 4/7] arm: use the new LED disk activity trigger

[Stephan Linz]

- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <linz@li-pro.net>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts  | 2 +-
 arch/arm/boot/dts/kirkwood-ns2lite.dts   | 2 +-
 arch/arm/boot/dts/kirkwood-topkick.dts   | 2 +-
 arch/arm/configs/collie_defconfig        | 2 +-
 arch/arm/configs/ixp4xx_defconfig        | 2 +-
 arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
 arch/arm/mach-omap1/board-osk.c          | 2 +-
 arch/arm/mach-pxa/spitz.c                | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 81d6c30..c4d04c5 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -86,7 +86,7 @@
 		led@3 {
 			label = "beagle-x15:usr3";
 			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index 1f2ca60..2c661ad 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -26,7 +26,7 @@
 		blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index f5c8c0d..1e9a721 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -129,7 +129,7 @@
 		disk {
 			label = "topkick:yellow:disk";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 		system2 {
 			label = "topkick:red:system";
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 6c56ad0..52dbad5 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LOCOMO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 24636cf..cf4918a 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=y
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 68cc099..ab47b8e 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS2", .active_low = 1,
 		.default_trigger = "mmc0", },
 	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "ide-disk", },
+		.default_trigger = "disk-activity", },
 };
 
 static const struct gpio_led_platform_data evm_led_data = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 209aecb..4dfb995 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
 	 * Also, D9 requires non-battery power.
 	 */
 	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "ide-disk", },
+			.default_trigger = "disk-activity", },
 	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
 	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
 			.default_trigger = "heartbeat", },
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index bd7cd8b..1080580 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
 	},
 	{
 		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "ide-disk",
+		.default_trigger	= "disk-activity",
 		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
 };
-- 
2.8.4

Re: [PATCH v3 4/7] arm: use the new LED disk activity trigger

[Gregory CLEMENT]

Hi Stephan,
 
 On jeu., juin 09 2016, Stephan Linz <linz@li-pro.net> wrote:

> - dts: rename 'ide-disk' to 'disk-activity'
> - platform: rename 'ide-disk' to 'disk-activity'
> - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> ---

I don't comment about the change itslef but if the change is OK for the
dt and led maintainer then you will have to split this patch in 3 chunks
(on for each subystem):

>  arch/arm/boot/dts/am57xx-beagle-x15.dts  | 2 +-
for omap

>  arch/arm/boot/dts/kirkwood-ns2lite.dts   | 2 +-
>  arch/arm/boot/dts/kirkwood-topkick.dts   | 2 +-
for mvebu

>  arch/arm/configs/collie_defconfig        | 2 +-
>  arch/arm/configs/ixp4xx_defconfig        | 2 +-
for pxa

>  arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
>  arch/arm/mach-omap1/board-osk.c          | 2 +-
for omap

>  arch/arm/mach-pxa/spitz.c                | 2 +-
for pxa

Thanks,

Gregory

>  8 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 81d6c30..c4d04c5 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -86,7 +86,7 @@
>  		led@3 {
>  			label = "beagle-x15:usr3";
>  			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>  			default-state = "off";
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> index 1f2ca60..2c661ad 100644
> --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
> +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
> @@ -26,7 +26,7 @@
>  		blue-sata {
>  			label = "ns2:blue:sata";
>  			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>  		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
> index f5c8c0d..1e9a721 100644
> --- a/arch/arm/boot/dts/kirkwood-topkick.dts
> +++ b/arch/arm/boot/dts/kirkwood-topkick.dts
> @@ -129,7 +129,7 @@
>  		disk {
>  			label = "topkick:yellow:disk";
>  			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
> -			linux,default-trigger = "ide-disk";
> +			linux,default-trigger = "disk-activity";
>  		};
>  		system2 {
>  			label = "topkick:red:system";
> diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
> index 6c56ad0..52dbad5 100644
> --- a/arch/arm/configs/collie_defconfig
> +++ b/arch/arm/configs/collie_defconfig
> @@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
>  CONFIG_LEDS_LOCOMO=y
>  CONFIG_LEDS_TRIGGERS=y
>  CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
>  # CONFIG_DNOTIFY is not set
>  CONFIG_VFAT_FS=y
>  CONFIG_TMPFS=y
> diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
> index 24636cf..cf4918a 100644
> --- a/arch/arm/configs/ixp4xx_defconfig
> +++ b/arch/arm/configs/ixp4xx_defconfig
> @@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
>  CONFIG_LEDS_GPIO=y
>  CONFIG_LEDS_TRIGGERS=y
>  CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_IDE_DISK=y
> +CONFIG_LEDS_TRIGGER_DISK=y
>  CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_ISL1208=y
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index 68cc099..ab47b8e 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
>  	{ .name = "DS2", .active_low = 1,
>  		.default_trigger = "mmc0", },
>  	{ .name = "DS1", .active_low = 1,
> -		.default_trigger = "ide-disk", },
> +		.default_trigger = "disk-activity", },
>  };
>  
>  static const struct gpio_led_platform_data evm_led_data = {
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 209aecb..4dfb995 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
>  	 * Also, D9 requires non-battery power.
>  	 */
>  	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
> -			.default_trigger = "ide-disk", },
> +			.default_trigger = "disk-activity", },
>  	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
>  	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
>  			.default_trigger = "heartbeat", },
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index bd7cd8b..1080580 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
>  	},
>  	{
>  		.name			= "spitz:green:hddactivity",
> -		.default_trigger	= "ide-disk",
> +		.default_trigger	= "disk-activity",
>  		.gpio			= SPITZ_GPIO_LED_GREEN,
>  	},
>  };
> -- 
> 2.8.4
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com