* [PATCH 1/2] ARM: dts: at91: Add pinctrl information to ethernet node.
@ 2016-06-24 13:31 Raashid Muhammed
[not found] ` <1466775069-606-1-git-send-email-raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
2016-07-01 18:47 ` [PATCH 1/2] ARM: dts: at91: Add pinctrl information to ethernet node Alexandre Belloni
0 siblings, 2 replies; 6+ messages in thread
From: Raashid Muhammed @ 2016-06-24 13:31 UTC (permalink / raw)
To: nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
plagnioj-sclMFOaUSTBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Raashid Muhammed
Add missing pinctrl information to ethernet node.
Signed-off-by: Raashid Muhammed <raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Vijay Kumar B. <vijaykumar-NDm7FNP0skFg9hUCZPvPmw@public.gmane.org>
---
arch/arm/boot/dts/at91-sam9_l9260.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 349a461..be409f2 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -49,6 +49,7 @@
};
macb0: ethernet@fffc4000 {
+ pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread[parent not found: <1466775069-606-1-git-send-email-raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>]
* [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes.
[not found] ` <1466775069-606-1-git-send-email-raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
@ 2016-06-24 13:31 ` Raashid Muhammed
2016-06-24 13:40 ` Alexandre Belloni
0 siblings, 1 reply; 6+ messages in thread
From: Raashid Muhammed @ 2016-06-24 13:31 UTC (permalink / raw)
To: nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
plagnioj-sclMFOaUSTBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Raashid Muhammed
Add power led node and rename status led node.
Signed-off-by: Raashid Muhammed <raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Vijay Kumar B. <vijaykumar-NDm7FNP0skFg9hUCZPvPmw@public.gmane.org>
---
arch/arm/boot/dts/at91-sam9_l9260.dts | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index be409f2..814753a 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -106,11 +106,16 @@
leds {
compatible = "gpio-leds";
- b0 {
- label = "b0";
- gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
+ pwr_led {
+ label = "sam9-l9260:yellow:pwr";
+ gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
};
+ status_led {
+ label = "sam9-l9260:green:status";
+ gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
};
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes.
2016-06-24 13:31 ` [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes Raashid Muhammed
@ 2016-06-24 13:40 ` Alexandre Belloni
[not found] ` <20160624134010.GN5809-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2016-06-24 14:04 ` Raashid Muhammed
0 siblings, 2 replies; 6+ messages in thread
From: Alexandre Belloni @ 2016-06-24 13:40 UTC (permalink / raw)
To: Raashid Muhammed
Cc: nicolas.ferre, plagnioj, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, linux, linux-arm-kernel, devicetree,
linux-kernel
Hi,
On 24/06/2016 at 19:01:09 +0530, Raashid Muhammed wrote :
> Add power led node and rename status led node.
>
Well, I'm ok with the change but this does more:
> Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
> ---
> arch/arm/boot/dts/at91-sam9_l9260.dts | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
> index be409f2..814753a 100644
> --- a/arch/arm/boot/dts/at91-sam9_l9260.dts
> +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
> @@ -106,11 +106,16 @@
> leds {
> compatible = "gpio-leds";
>
> - b0 {
> - label = "b0";
> - gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> + pwr_led {
> + label = "sam9-l9260:yellow:pwr";
> + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "cpu0";
> };
>
> + status_led {
> + label = "sam9-l9260:green:status";
> + gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "timer";
This trigger is also switched from heartbeat to timer, is this
intentional?
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread[parent not found: <20160624134010.GN5809-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes.
[not found] ` <20160624134010.GN5809-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
@ 2016-06-24 13:56 ` raashidmuhammed
0 siblings, 0 replies; 6+ messages in thread
From: raashidmuhammed @ 2016-06-24 13:56 UTC (permalink / raw)
To: Alexandre Belloni
Cc: nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w,
plagnioj-sclMFOaUSTBWk0Htik3J/w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 06/24/2016 07:10 PM, Alexandre Belloni wrote:
> Hi,
>
> On 24/06/2016 at 19:01:09 +0530, Raashid Muhammed wrote :
>> Add power led node and rename status led node.
>>
> Well, I'm ok with the change but this does more:
>
>> Signed-off-by: Raashid Muhammed <raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
>> Reviewed-by: Vijay Kumar B. <vijaykumar-NDm7FNP0skFg9hUCZPvPmw@public.gmane.org>
>> ---
>> arch/arm/boot/dts/at91-sam9_l9260.dts | 13 +++++++++----
>> 1 file changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
>> index be409f2..814753a 100644
>> --- a/arch/arm/boot/dts/at91-sam9_l9260.dts
>> +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
>> @@ -106,11 +106,16 @@
>> leds {
>> compatible = "gpio-leds";
>>
>> - b0 {
>> - label = "b0";
>> - gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
>> - linux,default-trigger = "heartbeat";
>> + pwr_led {
>> + label = "sam9-l9260:yellow:pwr";
>> + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
>> + linux,default-trigger = "cpu0";
>> };
>>
>> + status_led {
>> + label = "sam9-l9260:green:status";
>> + gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
>> + linux,default-trigger = "timer";
> This trigger is also switched from heartbeat to timer, is this
> intentional?
>
Yes, that is intentional. I should have included that in the commit message.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes.
2016-06-24 13:40 ` Alexandre Belloni
[not found] ` <20160624134010.GN5809-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
@ 2016-06-24 14:04 ` Raashid Muhammed
1 sibling, 0 replies; 6+ messages in thread
From: Raashid Muhammed @ 2016-06-24 14:04 UTC (permalink / raw)
To: Alexandre Belloni
Cc: mark.rutland, devicetree, pawel.moll, ijc+devicetree,
nicolas.ferre, linux, linux-kernel, robh+dt, galak, plagnioj,
Raashid Muhammed, linux-arm-kernel
Alexandre Belloni writes:
> Hi,
>
> On 24/06/2016 at 19:01:09 +0530, Raashid Muhammed wrote :
>> Add power led node and rename status led node.
>>
>
> Well, I'm ok with the change but this does more:
>
>> Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
>> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
>> ---
>> arch/arm/boot/dts/at91-sam9_l9260.dts | 13 +++++++++----
>> 1 file changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
>> index be409f2..814753a 100644
>> --- a/arch/arm/boot/dts/at91-sam9_l9260.dts
>> +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
>> @@ -106,11 +106,16 @@
>> leds {
>> compatible = "gpio-leds";
>>
>> - b0 {
>> - label = "b0";
>> - gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
>> - linux,default-trigger = "heartbeat";
>> + pwr_led {
>> + label = "sam9-l9260:yellow:pwr";
>> + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
>> + linux,default-trigger = "cpu0";
>> };
>>
>> + status_led {
>> + label = "sam9-l9260:green:status";
>> + gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
>> + linux,default-trigger = "timer";
>
> This trigger is also switched from heartbeat to timer, is this
> intentional?
Yes, that is intentional. I should have included that in the commit
message.
--
Sent with my mu4e
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ARM: dts: at91: Add pinctrl information to ethernet node.
2016-06-24 13:31 [PATCH 1/2] ARM: dts: at91: Add pinctrl information to ethernet node Raashid Muhammed
[not found] ` <1466775069-606-1-git-send-email-raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
@ 2016-07-01 18:47 ` Alexandre Belloni
1 sibling, 0 replies; 6+ messages in thread
From: Alexandre Belloni @ 2016-07-01 18:47 UTC (permalink / raw)
To: Raashid Muhammed
Cc: nicolas.ferre, plagnioj, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, linux, linux-arm-kernel, devicetree,
linux-kernel
On 24/06/2016 at 19:01:08 +0530, Raashid Muhammed wrote :
> Add missing pinctrl information to ethernet node.
>
> Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
> ---
> arch/arm/boot/dts/at91-sam9_l9260.dts | 1 +
> 1 file changed, 1 insertion(+)
>
Both applied, thanks.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-07-01 18:47 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-24 13:31 [PATCH 1/2] ARM: dts: at91: Add pinctrl information to ethernet node Raashid Muhammed
[not found] ` <1466775069-606-1-git-send-email-raashidmuhammed-1MQmoylvZ5VBDgjK7y7TUQ@public.gmane.org>
2016-06-24 13:31 ` [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes Raashid Muhammed
2016-06-24 13:40 ` Alexandre Belloni
[not found] ` <20160624134010.GN5809-m++hUPXGwpdeoWH0uzbU5w@public.gmane.org>
2016-06-24 13:56 ` raashidmuhammed
2016-06-24 14:04 ` Raashid Muhammed
2016-07-01 18:47 ` [PATCH 1/2] ARM: dts: at91: Add pinctrl information to ethernet node Alexandre Belloni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).