Re: [PATCH] ARM: dts: sun7i: Add BCM53125 Device Tree nodes

[Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

Le 26/06/2016 01:05, Maxime Ripard a écrit :
> Hi Florian,
> 
> On Sat, Jun 25, 2016 at 07:59:23PM -0700, Florian Fainelli wrote:
>> Le 23/06/2016 22:48, Chen-Yu Tsai a écrit :
>>>> diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
>>>> index 5ee43d8bf174..697582397dcf 100644
>>>> --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
>>>> +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
>>>> @@ -110,13 +110,67 @@
>>>>  &gmac {
>>>>         pinctrl-names = "default";
>>>>         pinctrl-0 = <&gmac_pins_rgmii_a>;
>>>> -       phy = <&phy1>;
>>>>         phy-mode = "rgmii";
>>>>         phy-supply = <&reg_gmac_3v3>;
>>>>         status = "okay";
>>>>
>>>> -       phy1: ethernet-phy@1 {
>>>> -               reg = <1>;
>>>> +       fixed-link {
>>>> +               speed = <1000>;
>>>> +               full-duplex;
>>>> +       };
>>>> +
>>>> +       mdio1 {
>>>
>>> mdio will suffice.
>>
>> There is another label in sun7i-a20.dtsi named mdio which is for the
>> MDIO controller node matching allwinner,sun4i-a10-mdio, which is not the
>> one we want here, we want the MDIO controller associated with the
>> Synopsys GMAC.
> 
> Yes, but it's in a different node, and you're not using any labels, so
> I don't really see how that would conflict.

Fair enough, I sent a v2 which uses "mdio-gmac" as a label, should I
respin a v3 which just uses "mdio"?

v2 is here;
http://www.spinics.net/lists/arm-kernel/msg514007.html
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html