devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Keerthy <a0393675@ti.com>
To: Lee Jones <lee.jones@linaro.org>, Keerthy <j-keerthy@ti.com>
Cc: broonie@kernel.org, tony@atomide.com, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/8] mfd: tps65218: Remove redundant read wrapper
Date: Mon, 27 Jun 2016 20:00:53 +0530	[thread overview]
Message-ID: <5771389D.5000103@ti.com> (raw)
In-Reply-To: <20160627122331.GB24377@dell>



On Monday 27 June 2016 05:53 PM, Lee Jones wrote:
> On Mon, 27 Jun 2016, Keerthy wrote:
>
>> Currently read directly calls the repmap read function. Hence
>> remove the redundant wrapper and use regmap read wherever
>> needed.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>   drivers/mfd/tps65218.c                 | 16 +---------------
>>   drivers/regulator/tps65218-regulator.c |  3 ++-
>>   include/linux/mfd/tps65218.h           |  2 --
>>   3 files changed, 3 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
>> index 80b9dc3..f20a531 100644
>> --- a/drivers/mfd/tps65218.c
>> +++ b/drivers/mfd/tps65218.c
>> @@ -34,20 +34,6 @@
>>   #define TPS65218_PASSWORD_REGS_UNLOCK   0x7D
>>
>>   /**
>> - * tps65218_reg_read: Read a single tps65218 register.
>> - *
>> - * @tps: Device to read from.
>> - * @reg: Register to read.
>> - * @val: Contians the value
>> - */
>> -int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
>> -			unsigned int *val)
>> -{
>> -	return regmap_read(tps->regmap, reg, val);
>> -}
>> -EXPORT_SYMBOL_GPL(tps65218_reg_read);
>> -
>
> What about the calls in the GPIO and Misc drivers?

Thanks Lee Jones for catching this. I will send an updated v3 of the set.

>
>> -/**
>>    * tps65218_reg_write: Write a single tps65218 register.
>>    *
>>    * @tps65218: Device to write to.
>> @@ -93,7 +79,7 @@ static int tps65218_update_bits(struct tps65218 *tps, unsigned int reg,
>>   	int ret;
>>   	unsigned int data;
>>
>> -	ret = tps65218_reg_read(tps, reg, &data);
>> +	ret = regmap_read(tps->regmap, reg, &data);
>>   	if (ret) {
>>   		dev_err(tps->dev, "Read from reg 0x%x failed\n", reg);
>>   		return ret;
>> diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
>> index a5e5634..679ab2f 100644
>> --- a/drivers/regulator/tps65218-regulator.c
>> +++ b/drivers/regulator/tps65218-regulator.c
>> @@ -22,6 +22,7 @@
>>   #include <linux/err.h>
>>   #include <linux/platform_device.h>
>>   #include <linux/of_device.h>
>> +#include <linux/regmap.h>
>>   #include <linux/regulator/of_regulator.h>
>>   #include <linux/regulator/driver.h>
>>   #include <linux/regulator/machine.h>
>> @@ -224,7 +225,7 @@ static int tps65218_pmic_get_current_limit(struct regulator_dev *dev)
>>   	unsigned int index;
>>   	struct tps65218 *tps = rdev_get_drvdata(dev);
>>
>> -	retval = tps65218_reg_read(tps, dev->desc->csel_reg, &index);
>> +	retval = regmap_read(tps->regmap, dev->desc->csel_reg, &index);
>>   	if (retval < 0)
>>   		return retval;
>>
>> diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
>> index d58f3b5..7c9241f 100644
>> --- a/include/linux/mfd/tps65218.h
>> +++ b/include/linux/mfd/tps65218.h
>> @@ -276,8 +276,6 @@ struct tps65218 {
>>   	struct regmap *regmap;
>>   };
>>
>> -int tps65218_reg_read(struct tps65218 *tps, unsigned int reg,
>> -					unsigned int *val);
>>   int tps65218_reg_write(struct tps65218 *tps, unsigned int reg,
>>   			unsigned int val, unsigned int level);
>>   int tps65218_set_bits(struct tps65218 *tps, unsigned int reg,
>

  reply	other threads:[~2016-06-27 14:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-27 11:01 [PATCH v2 0/8] mfd/regulator: tps65218: Clean ups Keerthy
2016-06-27 11:01 ` [PATCH v2 1/8] mfd: tps65218: Remove redundant read wrapper Keerthy
     [not found]   ` <1467025305-13464-2-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2016-06-27 11:51     ` kbuild test robot
2016-06-27 12:20     ` kbuild test robot
2016-06-27 12:23     ` Lee Jones
2016-06-27 14:30       ` Keerthy [this message]
2016-06-27 11:01 ` [PATCH v2 2/8] Documentation: regulator: tps65218: Update examples Keerthy
2016-06-27 11:01 ` [PATCH v2 3/8] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate Keerthy
     [not found]   ` <1467025305-13464-4-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2016-06-27 12:23     ` Lee Jones
2016-06-27 11:01 ` [PATCH v2 4/8] regulator: tps65218: Remove all the compatibles Keerthy
2016-06-27 11:01 ` [PATCH v2 5/8] ARM: dts: AM437X-GP-EVM: Remove redundant regulator compatibles Keerthy
2016-06-27 11:01 ` [PATCH v2 6/8] ARM: dts: AM437X-SK-EVM: " Keerthy
2016-06-27 11:01 ` [PATCH v2 7/8] ARM: dts: AM437X-CM-T43: " Keerthy
2016-06-27 11:01 ` [PATCH v2 8/8] ARM: dts: AM43X-EPOS-EVM: " Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5771389D.5000103@ti.com \
    --to=a0393675@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).