* [PATCH v4 1/3] Documentation: mfd: LP873X: Add information for the mfd driver
2016-06-29 9:30 [PATCH v4 0/3] mfd: lp873x: Add lp873x PMIC support Keerthy
@ 2016-06-29 9:30 ` Keerthy
2016-06-29 9:30 ` [PATCH v4 2/3] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-06-29 9:30 ` [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs Keerthy
2 siblings, 0 replies; 7+ messages in thread
From: Keerthy @ 2016-06-29 9:30 UTC (permalink / raw)
To: linus.walleij, gnurou, lee.jones
Cc: linux-omap, linux-kernel, devicetree, linux-gpio, broonie,
robh+dt, j-keerthy, tony
The lp873x series of PMICs have a bunch of regulators and a couple
of GPO(General Purpose Outputs).
Add information for the mfd and regulator drivers.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
Changes in v4:
* Added the GPO properties.
Changes in v3:
* Changed the example node lable to pmic from lp8733.
Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..1377c25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,59 @@
+TI LP873X MFD driver
+
+Required properties:
+ - compatible: "ti,lp8732", "ti,lp8733"
+ - reg: I2C slave address.
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ - regulators: : List of child nodes that specify the regulator
+ initialization data.
+Example:
+
+pmic: lp8733@60 {
+ compatible = "ti,lp8733";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ regulators {
+ lp8733_buck0: buck0 {
+ regulator-name = "lp8733-buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lp8733_buck1: buck1 {
+ regulator-name = "lp8733-buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo0: ldo0 {
+ regulator-name = "lp8733-ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo1: ldo1 {
+ regulator-name = "lp8733-ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 2/3] mfd: lp873x: Add lp873x PMIC support
2016-06-29 9:30 [PATCH v4 0/3] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-06-29 9:30 ` [PATCH v4 1/3] Documentation: mfd: LP873X: Add information for the mfd driver Keerthy
@ 2016-06-29 9:30 ` Keerthy
2016-06-29 9:30 ` [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs Keerthy
2 siblings, 0 replies; 7+ messages in thread
From: Keerthy @ 2016-06-29 9:30 UTC (permalink / raw)
To: linus.walleij, gnurou, lee.jones
Cc: linux-omap, linux-kernel, devicetree, linux-gpio, broonie,
robh+dt, j-keerthy, tony
The LP873X chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:
- Regulators.
- Configurable General Purpose Output Signals(GPO).
PMIC interacts with the main processor through i2c. PMIC has
couple of LDOs(Linear Regulators), couple of BUCKs (Step-Down DC-DC
Converter Cores) and GPOs(General Purpose Output Signals).
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
Changes in v4:
* Added Author.
* Added the mfd_cell for gpio.
Changes in v3:
* Reordered the probe code.
* Fixed Typo in Kconfig description.
* Removed unused member from struct lp873x.
drivers/mfd/Kconfig | 14 +++
drivers/mfd/Makefile | 2 +
drivers/mfd/lp873x.c | 99 +++++++++++++++++
include/linux/mfd/lp873x.h | 264 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 379 insertions(+)
create mode 100644 drivers/mfd/lp873x.c
create mode 100644 include/linux/mfd/lp873x.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9987d86..e68ac28 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1221,6 +1221,20 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_LP873X
+ tristate "TI LP873X Power Management IC"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here then you get support for the LP873X series of
+ power management integrated circuits(PMIC).
+ These include voltage regulators, Thermal protection, Configurable
+ general purpose outputs(GPO) that are used in portable devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called lp873x.
+
config MFD_TPS65218
tristate "TI TPS65218 Power Management chips"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2ba3ba3..7d9b965 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
+obj-$(CONFIG_MFD_LP873X) += lp873x.o
+
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c
new file mode 100644
index 0000000..54ed0ce
--- /dev/null
+++ b/drivers/mfd/lp873x.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+static const struct regmap_config lp873x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP873X_REG_MAX,
+};
+
+static const struct mfd_cell lp873x_cells[] = {
+ { .name = "lp873x-regulator", },
+ { .name = "lp873x-gpio", },
+};
+
+static int lp873x_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct lp873x *lp873;
+ int ret;
+ unsigned int otpid;
+
+ lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL);
+ if (!lp873)
+ return -ENOMEM;
+
+ lp873->dev = &client->dev;
+
+ lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config);
+ if (IS_ERR(lp873->regmap)) {
+ ret = PTR_ERR(lp873->regmap);
+ dev_err(lp873->dev, "Failed to initialize register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ mutex_init(&lp873->lp873_lock);
+
+ ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid);
+ if (ret) {
+ dev_err(lp873->dev, "Failed to read OTP ID\n");
+ return ret;
+ }
+
+ lp873->rev = otpid & LP873X_OTP_REV_OTP_ID;
+ i2c_set_clientdata(client, lp873);
+ ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells,
+ ARRAY_SIZE(lp873x_cells), NULL, 0, NULL);
+
+ return ret;
+}
+
+static const struct of_device_id of_lp873x_match_table[] = {
+ { .compatible = "ti,lp8733", },
+ { .compatible = "ti,lp8732", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_lp873x_match_table);
+
+static const struct i2c_device_id lp873x_id_table[] = {
+ { "lp873x", LP873X },
+ { "lp8732", LP873X },
+ { "lp8733", LP873X },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, lp873x_id_table);
+
+static struct i2c_driver lp873x_driver = {
+ .driver = {
+ .name = "lp873x",
+ .of_match_table = of_lp873x_match_table,
+ },
+ .probe = lp873x_probe,
+ .id_table = lp873x_id_table,
+};
+module_i2c_driver(lp873x_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP873X chip family multi-function driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h
new file mode 100644
index 0000000..fb7ec55
--- /dev/null
+++ b/include/linux/mfd/lp873x.h
@@ -0,0 +1,264 @@
+/*
+ * Functions to access LP873X power management chip.
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_LP873X_H
+#define __LINUX_MFD_LP873X_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/* LP873x chip id list */
+#define LP873X 0x00
+
+/* All register addresses */
+#define LP873X_REG_DEV_REV 0X00
+#define LP873X_REG_OTP_REV 0X01
+#define LP873X_REG_BUCK0_CTRL_1 0X02
+#define LP873X_REG_BUCK0_CTRL_2 0X03
+#define LP873X_REG_BUCK1_CTRL_1 0X04
+#define LP873X_REG_BUCK1_CTRL_2 0X05
+#define LP873X_REG_BUCK0_VOUT 0X06
+#define LP873X_REG_BUCK1_VOUT 0X07
+#define LP873X_REG_LDO0_CTRL 0X08
+#define LP873X_REG_LDO1_CTRL 0X09
+#define LP873X_REG_LDO0_VOUT 0X0A
+#define LP873X_REG_LDO1_VOUT 0X0B
+#define LP873X_REG_BUCK0_DELAY 0X0C
+#define LP873X_REG_BUCK1_DELAY 0X0D
+#define LP873X_REG_LDO0_DELAY 0X0E
+#define LP873X_REG_LDO1_DELAY 0X0F
+#define LP873X_REG_GPO_DELAY 0X10
+#define LP873X_REG_GPO2_DELAY 0X11
+#define LP873X_REG_GPO_CTRL 0X12
+#define LP873X_REG_CONFIG 0X13
+#define LP873X_REG_PLL_CTRL 0X14
+#define LP873X_REG_PGOOD_CTRL1 0X15
+#define LP873X_REG_PGOOD_CTRL2 0X16
+#define LP873X_REG_PG_FAULT 0X17
+#define LP873X_REG_RESET 0X18
+#define LP873X_REG_INT_TOP_1 0X19
+#define LP873X_REG_INT_TOP_2 0X1A
+#define LP873X_REG_INT_BUCK 0X1B
+#define LP873X_REG_INT_LDO 0X1C
+#define LP873X_REG_TOP_STAT 0X1D
+#define LP873X_REG_BUCK_STAT 0X1E
+#define LP873X_REG_LDO_STAT 0x1F
+#define LP873X_REG_TOP_MASK_1 0x20
+#define LP873X_REG_TOP_MASK_2 0x21
+#define LP873X_REG_BUCK_MASK 0x22
+#define LP873X_REG_LDO_MASK 0x23
+#define LP873X_REG_SEL_I_LOAD 0x24
+#define LP873X_REG_I_LOAD_2 0x25
+#define LP873X_REG_I_LOAD_1 0x26
+
+#define LP873X_REG_MAX LP873X_REG_I_LOAD_1
+
+/* Register field definitions */
+#define LP873X_DEV_REV_DEV_ID 0xC0
+#define LP873X_DEV_REV_ALL_LAYER 0x30
+#define LP873X_DEV_REV_METAL_LAYER 0x0F
+
+#define LP873X_OTP_REV_OTP_ID 0xFF
+
+#define LP873X_BUCK0_CTRL_1_BUCK0_FPWM BIT(3)
+#define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2)
+#define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1)
+#define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0)
+
+#define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38
+#define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07
+
+#define LP873X_BUCK1_CTRL_1_BUCK1_FPWM BIT(3)
+#define LP873X_BUCK1_CTRL_1_BUCK1_RDIS_EN BIT(2)
+#define LP873X_BUCK1_CTRL_1_BUCK1_EN_PIN_CTRL BIT(1)
+#define LP873X_BUCK1_CTRL_1_BUCK1_EN BIT(0)
+
+#define LP873X_BUCK1_CTRL_2_BUCK1_ILIM 0x38
+#define LP873X_BUCK1_CTRL_2_BUCK1_SLEW_RATE 0x07
+
+#define LP873X_BUCK0_VOUT_BUCK0_VSET 0xFF
+
+#define LP873X_BUCK1_VOUT_BUCK1_VSET 0xFF
+
+#define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2)
+#define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1)
+#define LP873X_LDO0_CTRL_LDO0_EN BIT(0)
+
+#define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2)
+#define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1)
+#define LP873X_LDO1_CTRL_LDO1_EN BIT(0)
+
+#define LP873X_LDO0_VOUT_LDO0_VSET 0x1F
+
+#define LP873X_LDO1_VOUT_LDO1_VSET 0x1F
+
+#define LP873X_BUCK0_DELAY_BUCK0_SD_DELAY 0xF0
+#define LP873X_BUCK0_DELAY_BUCK0_SU_DELAY 0x0F
+
+#define LP873X_BUCK1_DELAY_BUCK1_SD_DELAY 0xF0
+#define LP873X_BUCK1_DELAY_BUCK1_SU_DELAY 0x0F
+
+#define LP873X_LDO0_DELAY_LDO0_SD_DELAY 0xF0
+#define LP873X_LDO0_DELAY_LDO0_SU_DELAY 0x0F
+
+#define LP873X_LDO1_DELAY_LDO1_SD_DELAY 0xF0
+#define LP873X_LDO1_DELAY_LDO1_SU_DELAY 0x0F
+
+#define LP873X_GPO_DELAY_GPO_SD_DELAY 0xF0
+#define LP873X_GPO_DELAY_GPO_SU_DELAY 0x0F
+
+#define LP873X_GPO2_DELAY_GPO2_SD_DELAY 0xF0
+#define LP873X_GPO2_DELAY_GPO2_SU_DELAY 0x0F
+
+#define LP873X_GPO_CTRL_GPO2_OD BIT(6)
+#define LP873X_GPO_CTRL_GPO2_EN_PIN_CTRL BIT(5)
+#define LP873X_GPO_CTRL_GPO2_EN BIT(4)
+#define LP873X_GPO_CTRL_GPO_OD BIT(2)
+#define LP873X_GPO_CTRL_GPO_EN_PIN_CTRL BIT(1)
+#define LP873X_GPO_CTRL_GPO_EN BIT(0)
+
+#define LP873X_CONFIG_SU_DELAY_SEL BIT(6)
+#define LP873X_CONFIG_SD_DELAY_SEL BIT(5)
+#define LP873X_CONFIG_CLKIN_PIN_SEL BIT(4)
+#define LP873X_CONFIG_CLKIN_PD BIT(3)
+#define LP873X_CONFIG_EN_PD BIT(2)
+#define LP873X_CONFIG_TDIE_WARN_LEVEL BIT(1)
+#define LP873X_EN_SPREAD_SPEC BIT(0)
+
+#define LP873X_PLL_CTRL_EN_PLL BIT(6)
+#define LP873X_EXT_CLK_FREQ 0x1F
+
+#define LP873X_PGOOD_CTRL1_PGOOD_POL BIT(7)
+#define LP873X_PGOOD_CTRL1_PGOOD_OD BIT(6)
+#define LP873X_PGOOD_CTRL1_PGOOD_WINDOW_LDO BIT(5)
+#define LP873X_PGOOD_CTRL1_PGOOD_WINDOWN_BUCK BIT(4)
+#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO1 BIT(3)
+#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO0 BIT(2)
+#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK1 BIT(1)
+#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK0 BIT(0)
+
+#define LP873X_PGOOD_CTRL2_EN_PGOOD_TWARN BIT(2)
+#define LP873X_PGOOD_CTRL2_EN_PG_FAULT_GATE BIT(1)
+#define LP873X_PGOOD_CTRL2_PGOOD_MODE BIT(0)
+
+#define LP873X_PG_FAULT_PG_FAULT_LDO1 BIT(3)
+#define LP873X_PG_FAULT_PG_FAULT_LDO0 BIT(2)
+#define LP873X_PG_FAULT_PG_FAULT_BUCK1 BIT(1)
+#define LP873X_PG_FAULT_PG_FAULT_BUCK0 BIT(0)
+
+#define LP873X_RESET_SW_RESET BIT(0)
+
+#define LP873X_INT_TOP_1_PGOOD_INT BIT(7)
+#define LP873X_INT_TOP_1_LDO_INT BIT(6)
+#define LP873X_INT_TOP_1_BUCK_INT BIT(5)
+#define LP873X_INT_TOP_1_SYNC_CLK_INT BIT(4)
+#define LP873X_INT_TOP_1_TDIE_SD_INT BIT(3)
+#define LP873X_INT_TOP_1_TDIE_WARN_INT BIT(2)
+#define LP873X_INT_TOP_1_OVP_INT BIT(1)
+#define LP873X_INT_TOP_1_I_MEAS_INT BIT(0)
+
+#define LP873X_INT_TOP_2_RESET_REG_INT BIT(0)
+
+#define LP873X_INT_BUCK_BUCK1_PG_INT BIT(6)
+#define LP873X_INT_BUCK_BUCK1_SC_INT BIT(5)
+#define LP873X_INT_BUCK_BUCK1_ILIM_INT BIT(4)
+#define LP873X_INT_BUCK_BUCK0_PG_INT BIT(2)
+#define LP873X_INT_BUCK_BUCK0_SC_INT BIT(1)
+#define LP873X_INT_BUCK_BUCK0_ILIM_INT BIT(0)
+
+#define LP873X_INT_LDO_LDO1_PG_INT BIT(6)
+#define LP873X_INT_LDO_LDO1_SC_INT BIT(5)
+#define LP873X_INT_LDO_LDO1_ILIM_INT BIT(4)
+#define LP873X_INT_LDO_LDO0_PG_INT BIT(2)
+#define LP873X_INT_LDO_LDO0_SC_INT BIT(1)
+#define LP873X_INT_LDO_LDO0_ILIM_INT BIT(0)
+
+#define LP873X_TOP_STAT_PGOOD_STAT BIT(7)
+#define LP873X_TOP_STAT_SYNC_CLK_STAT BIT(4)
+#define LP873X_TOP_STAT_TDIE_SD_STAT BIT(3)
+#define LP873X_TOP_STAT_TDIE_WARN_STAT BIT(2)
+#define LP873X_TOP_STAT_OVP_STAT BIT(1)
+
+#define LP873X_BUCK_STAT_BUCK1_STAT BIT(7)
+#define LP873X_BUCK_STAT_BUCK1_PG_STAT BIT(6)
+#define LP873X_BUCK_STAT_BUCK1_ILIM_STAT BIT(4)
+#define LP873X_BUCK_STAT_BUCK0_STAT BIT(3)
+#define LP873X_BUCK_STAT_BUCK0_PG_STAT BIT(2)
+#define LP873X_BUCK_STAT_BUCK0_ILIM_STAT BIT(0)
+
+#define LP873X_LDO_STAT_LDO1_STAT BIT(7)
+#define LP873X_LDO_STAT_LDO1_PG_STAT BIT(6)
+#define LP873X_LDO_STAT_LDO1_ILIM_STAT BIT(4)
+#define LP873X_LDO_STAT_LDO0_STAT BIT(3)
+#define LP873X_LDO_STAT_LDO0_PG_STAT BIT(2)
+#define LP873X_LDO_STAT_LDO0_ILIM_STAT BIT(0)
+
+#define LP873X_TOP_MASK_1_PGOOD_INT_MASK BIT(7)
+#define LP873X_TOP_MASK_1_SYNC_CLK_MASK BIT(4)
+#define LP873X_TOP_MASK_1_TDIE_WARN_MASK BIT(2)
+#define LP873X_TOP_MASK_1_I_MEAS_MASK BIT(0)
+
+#define LP873X_TOP_MASK_2_RESET_REG_MASK BIT(0)
+
+#define LP873X_BUCK_MASK_BUCK1_PGF_MASK BIT(7)
+#define LP873X_BUCK_MASK_BUCK1_PGR_MASK BIT(6)
+#define LP873X_BUCK_MASK_BUCK1_ILIM_MASK BIT(4)
+#define LP873X_BUCK_MASK_BUCK0_PGF_MASK BIT(3)
+#define LP873X_BUCK_MASK_BUCK0_PGR_MASK BIT(2)
+#define LP873X_BUCK_MASK_BUCK0_ILIM_MASK BIT(0)
+
+#define LP873X_LDO_MASK_LDO1_PGF_MASK BIT(7)
+#define LP873X_LDO_MASK_LDO1_PGR_MASK BIT(6)
+#define LP873X_LDO_MASK_LDO1_ILIM_MASK BIT(4)
+#define LP873X_LDO_MASK_LDO0_PGF_MASK BIT(3)
+#define LP873X_LDO_MASK_LDO0_PGR_MASK BIT(2)
+#define LP873X_LDO_MASK_LDO0_ILIM_MASK BIT(0)
+
+#define LP873X_SEL_I_LOAD_CURRENT_BUCK_SELECT BIT(0)
+
+#define LP873X_I_LOAD_2_BUCK_LOAD_CURRENT BIT(0)
+
+#define LP873X_I_LOAD_1_BUCK_LOAD_CURRENT 0xFF
+
+#define LP873X_MAX_REG_ID LP873X_LDO_1
+
+/* Number of step-down converters available */
+#define LP873X_NUM_BUCK 2
+/* Number of LDO voltage regulators available */
+#define LP873X_NUM_LDO 2
+/* Number of total regulators available */
+#define LP873X_NUM_REGULATOR (LP873X_NUM_BUCK + LP873X_NUM_LDO)
+
+enum lp873x_regulator_id {
+ /* BUCK's */
+ LP873X_BUCK_0,
+ LP873X_BUCK_1,
+ /* LDOs */
+ LP873X_LDO_0,
+ LP873X_LDO_1,
+};
+
+/**
+ * struct lp873x - state holder for the lp873x driver
+ * Device data may be used to access the LP873X chip
+ */
+struct lp873x {
+ struct device *dev;
+ u8 rev;
+ struct mutex lp873_lock; /* lock guarding the data structure */
+ struct regmap *regmap;
+};
+#endif /* __LINUX_MFD_LP873X_H */
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs
2016-06-29 9:30 [PATCH v4 0/3] mfd: lp873x: Add lp873x PMIC support Keerthy
2016-06-29 9:30 ` [PATCH v4 1/3] Documentation: mfd: LP873X: Add information for the mfd driver Keerthy
2016-06-29 9:30 ` [PATCH v4 2/3] mfd: lp873x: Add lp873x PMIC support Keerthy
@ 2016-06-29 9:30 ` Keerthy
2016-06-29 10:43 ` Manish Badarkhe
2 siblings, 1 reply; 7+ messages in thread
From: Keerthy @ 2016-06-29 9:30 UTC (permalink / raw)
To: linus.walleij, gnurou, lee.jones
Cc: linux-omap, linux-kernel, devicetree, linux-gpio, broonie,
robh+dt, j-keerthy, tony
Add driver for lp873x PMIC family GPOs. Two GPOs are supported
and can be configured in Open-drain output or Push-pull output.
Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/gpio/Kconfig | 10 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-lp873x.c | 188 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 199 insertions(+)
create mode 100644 drivers/gpio/gpio-lp873x.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d35a382..2fb99cb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -871,6 +871,16 @@ config GPIO_LP3943
LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
Open drain outputs are required for this usage.
+config GPIO_LP873X
+ tristate "TI LP873X GPO"
+ depends on MFD_LP873X
+ help
+ This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present
+ on LP873X PMICs.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-lp873x.
+
config GPIO_MAX77620
tristate "GPIO support for PMIC MAX77620 and MAX20024"
depends on MFD_MAX77620
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6e111fc..f73df0a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
+obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
diff --git a/drivers/gpio/gpio-lp873x.c b/drivers/gpio/gpio-lp873x.c
new file mode 100644
index 0000000..f1b0389
--- /dev/null
+++ b/drivers/gpio/gpio-lp873x.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65218 driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+struct lp873x_gpio {
+ struct gpio_chip chip;
+ struct lp873x *lp873;
+};
+
+static int lp873x_gpio_get_direction(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ /* This device is output only */
+ return 0;
+}
+
+static int lp873x_gpio_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ /* This device is output only */
+ return -EINVAL;
+}
+
+static int lp873x_gpio_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct lp873x_gpio *gpio = gpiochip_get_data(chip);
+
+ /* Set the initial value */
+ regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
+ BIT(offset * 4), value ? BIT(offset * 4) : 0);
+
+ return 0;
+}
+
+static int lp873x_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct lp873x_gpio *gpio = gpiochip_get_data(chip);
+ int ret, val;
+
+ ret = regmap_read(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ return val & BIT(offset * 4);
+}
+
+static void lp873x_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct lp873x_gpio *gpio = gpiochip_get_data(chip);
+
+ regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
+ BIT(offset * 4), value ? BIT(offset * 4) : 0);
+}
+
+static int lp873x_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ struct lp873x_gpio *gpio = gpiochip_get_data(gc);
+ int ret;
+
+ switch (offset) {
+ case 0:
+ /* No MUX Set up Needed for GPO */
+ break;
+ case 1:
+ /* Setup the CLKIN_PIN_SEL MUX to GPO2 */
+ ret = regmap_update_bits(gpio->lp873->regmap, LP873X_REG_CONFIG,
+ LP873X_CONFIG_CLKIN_PIN_SEL, 0);
+ if (ret)
+ return ret;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int lp873x_gpio_set_single_ended(struct gpio_chip *gc,
+ unsigned int offset,
+ enum single_ended_mode mode)
+{
+ struct lp873x_gpio *gpio = gpiochip_get_data(gc);
+
+ switch (mode) {
+ case LINE_MODE_OPEN_DRAIN:
+ return regmap_update_bits(gpio->lp873->regmap,
+ LP873X_REG_GPO_CTRL,
+ BIT(offset * 4 + 2),
+ BIT(offset * 4 + 2));
+ case LINE_MODE_PUSH_PULL:
+ return regmap_update_bits(gpio->lp873->regmap,
+ LP873X_REG_GPO_CTRL,
+ BIT(offset * 4 + 2), 0);
+ default:
+ return -ENOTSUPP;
+ }
+}
+
+static struct gpio_chip template_chip = {
+ .label = "lp873x-gpio",
+ .owner = THIS_MODULE,
+ .request = lp873x_gpio_request,
+ .get_direction = lp873x_gpio_get_direction,
+ .direction_input = lp873x_gpio_direction_input,
+ .direction_output = lp873x_gpio_direction_output,
+ .get = lp873x_gpio_get,
+ .set = lp873x_gpio_set,
+ .set_single_ended = lp873x_gpio_set_single_ended,
+ .base = -1,
+ .ngpio = 2,
+ .can_sleep = true,
+};
+
+static int lp873x_gpio_probe(struct platform_device *pdev)
+{
+ struct lp873x_gpio *gpio;
+ int ret;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, gpio);
+
+ gpio->lp873 = dev_get_drvdata(pdev->dev.parent);
+ gpio->chip = template_chip;
+ gpio->chip.parent = gpio->lp873->dev;
+
+ ret = gpiochip_add_data(&gpio->chip, gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lp873x_gpio_remove(struct platform_device *pdev)
+{
+ struct lp873x_gpio *gpio = platform_get_drvdata(pdev);
+
+ gpiochip_remove(&gpio->chip);
+
+ return 0;
+}
+
+static const struct platform_device_id lp873x_gpio_id_table[] = {
+ { "lp873x-gpio", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp873x_gpio_id_table);
+
+static struct platform_driver lp873x_gpio_driver = {
+ .driver = {
+ .name = "lp873x-gpio",
+ },
+ .probe = lp873x_gpio_probe,
+ .remove = lp873x_gpio_remove,
+ .id_table = lp873x_gpio_id_table,
+};
+module_platform_driver(lp873x_gpio_driver);
+
+MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP873X GPIO driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs
2016-06-29 9:30 ` [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs Keerthy
@ 2016-06-29 10:43 ` Manish Badarkhe
2016-06-29 10:45 ` Manish Badarkhe
0 siblings, 1 reply; 7+ messages in thread
From: Manish Badarkhe @ 2016-06-29 10:43 UTC (permalink / raw)
To: Keerthy
Cc: linus.walleij, gnurou, Lee Jones, linux-omap,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio, Mark Brown, robh+dt, Tony Lindgren
Hi Keerthy
Some minor comment
> +static int lp873x_gpio_direction_output(struct gpio_chip *chip,
> + unsigned int offset, int value)
> +{
> + struct lp873x_gpio *gpio = gpiochip_get_data(chip);
> +
> + /* Set the initial value */
> + regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
> + BIT(offset * 4), value ? BIT(offset * 4) : 0);
> +
> + return 0;
> +}
Error needs to be return, this function always return 0.
> +
> +static int lp873x_gpio_get(struct gpio_chip *chip, unsigned int offset)
> +{
> + struct lp873x_gpio *gpio = gpiochip_get_data(chip);
> + int ret, val;
> +
> + ret = regmap_read(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, &val);
> + if (ret < 0)
> + return ret;
> +
> + return val & BIT(offset * 4);
> +}
> +
> +static void lp873x_gpio_set(struct gpio_chip *chip, unsigned int offset,
> + int value)
> +{
> + struct lp873x_gpio *gpio = gpiochip_get_data(chip);
> +
> + regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
> + BIT(offset * 4), value ? BIT(offset * 4) : 0);
> +}
> +
> +static int lp873x_gpio_request(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct lp873x_gpio *gpio = gpiochip_get_data(gc);
> + int ret;
> +
> + switch (offset) {
> + case 0:
> + /* No MUX Set up Needed for GPO */
> + break;
> + case 1:
> + /* Setup the CLKIN_PIN_SEL MUX to GPO2 */
> + ret = regmap_update_bits(gpio->lp873->regmap, LP873X_REG_CONFIG,
> + LP873X_CONFIG_CLKIN_PIN_SEL, 0);
> + if (ret)
> + return ret;
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
Error needs to be return, this function always return 0. Only default
returns error here which is unlikely condition.
> +
> +
> +static int lp873x_gpio_set_single_ended(struct gpio_chip *gc,
> + unsigned int offset,
> + enum single_ended_mode mode)
> +{
> + struct lp873x_gpio *gpio = gpiochip_get_data(gc);
> +
> + switch (mode) {
> + case LINE_MODE_OPEN_DRAIN:
> + return regmap_update_bits(gpio->lp873->regmap,
> + LP873X_REG_GPO_CTRL,
> + BIT(offset * 4 + 2),
> + BIT(offset * 4 + 2));
> + case LINE_MODE_PUSH_PULL:
> + return regmap_update_bits(gpio->lp873->regmap,
> + LP873X_REG_GPO_CTRL,
> + BIT(offset * 4 + 2), 0);
> + default:
> + return -ENOTSUPP;
> + }
> +}
Error needs to be return, this function always return 0. Only default
returns error here which is unlikely condition.
Regards
Manish Badarkhe
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs
2016-06-29 10:43 ` Manish Badarkhe
@ 2016-06-29 10:45 ` Manish Badarkhe
2016-06-29 12:40 ` Keerthy
0 siblings, 1 reply; 7+ messages in thread
From: Manish Badarkhe @ 2016-06-29 10:45 UTC (permalink / raw)
To: Keerthy
Cc: linus.walleij, gnurou, Lee Jones, linux-omap,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio, Mark Brown, robh+dt, Tony Lindgren
Hi Keerthy,
sorry ignore my last two comments in previous mail.
On Wed, Jun 29, 2016 at 4:13 PM, Manish Badarkhe
<badarkhe.manish@gmail.com> wrote:
> Hi Keerthy
>
> Some minor comment
>
>> +static int lp873x_gpio_direction_output(struct gpio_chip *chip,
>> + unsigned int offset, int value)
>> +{
>> + struct lp873x_gpio *gpio = gpiochip_get_data(chip);
>> +
>> + /* Set the initial value */
>> + regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
>> + BIT(offset * 4), value ? BIT(offset * 4) : 0);
>> +
>> + return 0;
>> +}
Error needs to be return, this function always return 0.
Regards
Manish Badarkhe
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH v4 3/3] gpio: lp873x: Add support for General Purpose Outputs
2016-06-29 10:45 ` Manish Badarkhe
@ 2016-06-29 12:40 ` Keerthy
0 siblings, 0 replies; 7+ messages in thread
From: Keerthy @ 2016-06-29 12:40 UTC (permalink / raw)
To: Manish Badarkhe, Keerthy
Cc: linus.walleij, gnurou, Lee Jones, linux-omap,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio, Mark Brown, robh+dt, Tony Lindgren
On Wednesday 29 June 2016 04:15 PM, Manish Badarkhe wrote:
> Hi Keerthy,
>
> sorry ignore my last two comments in previous mail.
>
> On Wed, Jun 29, 2016 at 4:13 PM, Manish Badarkhe
> <badarkhe.manish@gmail.com> wrote:
>> Hi Keerthy
>>
>> Some minor comment
>>
>>> +static int lp873x_gpio_direction_output(struct gpio_chip *chip,
>>> + unsigned int offset, int value)
>>> +{
>>> + struct lp873x_gpio *gpio = gpiochip_get_data(chip);
>>> +
>>> + /* Set the initial value */
>>> + regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
>>> + BIT(offset * 4), value ? BIT(offset * 4) : 0);
>>> +
>>> + return 0;
>>> +}
>
> Error needs to be return, this function always return 0.
Yes! I can just do:
return regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
BIT(offset * 4), value ? BIT(offset * 4) : 0);
>
> Regards
> Manish Badarkhe
>
^ permalink raw reply [flat|nested] 7+ messages in thread