From: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Kevin Hilman <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Daniel Kurtz <djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v7 1/4] soc: mediatek: Refine scpsys to support multiple platform
Date: Thu, 7 Jul 2016 13:20:09 +0200 [thread overview]
Message-ID: <577E3AE9.5080202@gmail.com> (raw)
In-Reply-To: <1467783564.26485.22.camel@mtksdaap41>
On 06/07/16 07:39, James Liao wrote:
> Hi Matthias,
>
> On Sat, 2016-07-02 at 18:33 +0200, Matthias Brugger wrote:
>>
>> On 05/16/2016 11:28 AM, James Liao wrote:
>>> Refine scpsys driver common code to support multiple SoC / platform.
>>>
>>> Signed-off-by: James Liao <jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>>> Reviewed-by: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>>> ---
>>> drivers/soc/mediatek/mtk-scpsys.c | 363 +++++++++++++++++++++++---------------
>>> 1 file changed, 220 insertions(+), 143 deletions(-)
>>>
>>> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
>>> index 57e781c..5870a24 100644
>>> --- a/drivers/soc/mediatek/mtk-scpsys.c
>>> +++ b/drivers/soc/mediatek/mtk-scpsys.c
>>> @@ -11,17 +11,15 @@
>>> * GNU General Public License for more details.
>>> */
>>> #include <linux/clk.h>
>>> -#include <linux/delay.h>
>>> +#include <linux/init.h>
>>> #include <linux/io.h>
>>> -#include <linux/kernel.h>
>>> #include <linux/mfd/syscon.h>
>>> -#include <linux/init.h>
>>> #include <linux/of_device.h>
>>> #include <linux/platform_device.h>
>>> #include <linux/pm_domain.h>
>>> -#include <linux/regmap.h>
>>> -#include <linux/soc/mediatek/infracfg.h>
>>> #include <linux/regulator/consumer.h>
>>> +#include <linux/soc/mediatek/infracfg.h>
>>> +
>>> #include <dt-bindings/power/mt8173-power.h>
>>>
>>> #define SPM_VDE_PWR_CON 0x0210
>>> @@ -34,6 +32,7 @@
>>> #define SPM_MFG_2D_PWR_CON 0x02c0
>>> #define SPM_MFG_ASYNC_PWR_CON 0x02c4
>>> #define SPM_USB_PWR_CON 0x02cc
>>> +
>>> #define SPM_PWR_STATUS 0x060c
>>> #define SPM_PWR_STATUS_2ND 0x0610
>>>
>>> @@ -55,12 +54,12 @@
>>> #define PWR_STATUS_USB BIT(25)
>>>
>>> enum clk_id {
>>> - MT8173_CLK_NONE,
>>> - MT8173_CLK_MM,
>>> - MT8173_CLK_MFG,
>>> - MT8173_CLK_VENC,
>>> - MT8173_CLK_VENC_LT,
>>> - MT8173_CLK_MAX,
>>> + CLK_NONE,
>>> + CLK_MM,
>>> + CLK_MFG,
>>> + CLK_VENC,
>>> + CLK_VENC_LT,
>>> + CLK_MAX,
>>> };
>>>
>>> #define MAX_CLKS 2
>>> @@ -76,98 +75,6 @@ struct scp_domain_data {
>>> bool active_wakeup;
>>> };
>>>
>>> -static const struct scp_domain_data scp_domain_data[] = {
>>> - [MT8173_POWER_DOMAIN_VDEC] = {
>>> - .name = "vdec",
>>> - .sta_mask = PWR_STATUS_VDEC,
>>> - .ctl_offs = SPM_VDE_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(12, 12),
>>> - .clk_id = {MT8173_CLK_MM},
>>> - },
>>> - [MT8173_POWER_DOMAIN_VENC] = {
>>> - .name = "venc",
>>> - .sta_mask = PWR_STATUS_VENC,
>>> - .ctl_offs = SPM_VEN_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(15, 12),
>>> - .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC},
>>> - },
>>> - [MT8173_POWER_DOMAIN_ISP] = {
>>> - .name = "isp",
>>> - .sta_mask = PWR_STATUS_ISP,
>>> - .ctl_offs = SPM_ISP_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(13, 12),
>>> - .clk_id = {MT8173_CLK_MM},
>>> - },
>>> - [MT8173_POWER_DOMAIN_MM] = {
>>> - .name = "mm",
>>> - .sta_mask = PWR_STATUS_DISP,
>>> - .ctl_offs = SPM_DIS_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(12, 12),
>>> - .clk_id = {MT8173_CLK_MM},
>>> - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
>>> - MT8173_TOP_AXI_PROT_EN_MM_M1,
>>> - },
>>> - [MT8173_POWER_DOMAIN_VENC_LT] = {
>>> - .name = "venc_lt",
>>> - .sta_mask = PWR_STATUS_VENC_LT,
>>> - .ctl_offs = SPM_VEN2_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(15, 12),
>>> - .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC_LT},
>>> - },
>>> - [MT8173_POWER_DOMAIN_AUDIO] = {
>>> - .name = "audio",
>>> - .sta_mask = PWR_STATUS_AUDIO,
>>> - .ctl_offs = SPM_AUDIO_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(15, 12),
>>> - .clk_id = {MT8173_CLK_NONE},
>>> - },
>>> - [MT8173_POWER_DOMAIN_USB] = {
>>> - .name = "usb",
>>> - .sta_mask = PWR_STATUS_USB,
>>> - .ctl_offs = SPM_USB_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(15, 12),
>>> - .clk_id = {MT8173_CLK_NONE},
>>> - .active_wakeup = true,
>>> - },
>>> - [MT8173_POWER_DOMAIN_MFG_ASYNC] = {
>>> - .name = "mfg_async",
>>> - .sta_mask = PWR_STATUS_MFG_ASYNC,
>>> - .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = 0,
>>> - .clk_id = {MT8173_CLK_MFG},
>>> - },
>>> - [MT8173_POWER_DOMAIN_MFG_2D] = {
>>> - .name = "mfg_2d",
>>> - .sta_mask = PWR_STATUS_MFG_2D,
>>> - .ctl_offs = SPM_MFG_2D_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(11, 8),
>>> - .sram_pdn_ack_bits = GENMASK(13, 12),
>>> - .clk_id = {MT8173_CLK_NONE},
>>> - },
>>> - [MT8173_POWER_DOMAIN_MFG] = {
>>> - .name = "mfg",
>>> - .sta_mask = PWR_STATUS_MFG,
>>> - .ctl_offs = SPM_MFG_PWR_CON,
>>> - .sram_pdn_bits = GENMASK(13, 8),
>>> - .sram_pdn_ack_bits = GENMASK(21, 16),
>>> - .clk_id = {MT8173_CLK_NONE},
>>> - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
>>> - MT8173_TOP_AXI_PROT_EN_MFG_M0 |
>>> - MT8173_TOP_AXI_PROT_EN_MFG_M1 |
>>> - MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
>>> - },
>>> -};
>>> -
>>> -#define NUM_DOMAINS ARRAY_SIZE(scp_domain_data)
>>> -
>>> struct scp;
>>>
>>> struct scp_domain {
>>> @@ -179,7 +86,7 @@ struct scp_domain {
>>> };
>>>
>>> struct scp {
>>> - struct scp_domain domains[NUM_DOMAINS];
>>> + struct scp_domain *domains;
>>> struct genpd_onecell_data pd_data;
>>> struct device *dev;
>>> void __iomem *base;
>>> @@ -408,57 +315,69 @@ static bool scpsys_active_wakeup(struct device *dev)
>>> return scpd->data->active_wakeup;
>>> }
>>>
>>> -static int scpsys_probe(struct platform_device *pdev)
>>> +static void init_clks(struct platform_device *pdev, struct clk *clk[CLK_MAX])
>>> +{
>>> + enum clk_id clk_ids[] = {
>>> + CLK_MM,
>>> + CLK_MFG,
>>> + CLK_VENC,
>>> + CLK_VENC_LT
>>> + };
>>> +
>>> + static const char * const clk_names[] = {
>>> + "mm",
>>> + "mfg",
>>> + "venc",
>>> + "venc_lt",
>>> + };
>>> +
>>> + int i;
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(clk_ids); i++)
>>> + clk[clk_ids[i]] = devm_clk_get(&pdev->dev, clk_names[i]);
>>
>> We can use the global enum clk_id and stat with i = 1, right?
>
> You are right. I'll change the start value with i = CLK_NONE + 1 in next
> patch.
>
>>> +}
>>> +
>>> +static struct scp *init_scp(struct platform_device *pdev,
>>> + const struct scp_domain_data *scp_domain_data, int num)
>>> {
>>> struct genpd_onecell_data *pd_data;
>>> struct resource *res;
>>> - int i, j, ret;
>>> + int i, j;
>>> struct scp *scp;
>>> - struct clk *clk[MT8173_CLK_MAX];
>>> + struct clk *clk[CLK_MAX];
>>>
>>> scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
>>> if (!scp)
>>> - return -ENOMEM;
>>> + return ERR_PTR(-ENOMEM);
>>>
>>> scp->dev = &pdev->dev;
>>>
>>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> scp->base = devm_ioremap_resource(&pdev->dev, res);
>>> if (IS_ERR(scp->base))
>>> - return PTR_ERR(scp->base);
>>> -
>>> - pd_data = &scp->pd_data;
>>> -
>>> - pd_data->domains = devm_kzalloc(&pdev->dev,
>>> - sizeof(*pd_data->domains) * NUM_DOMAINS, GFP_KERNEL);
>>> - if (!pd_data->domains)
>>> - return -ENOMEM;
>>> -
>>> - clk[MT8173_CLK_MM] = devm_clk_get(&pdev->dev, "mm");
>>> - if (IS_ERR(clk[MT8173_CLK_MM]))
>>> - return PTR_ERR(clk[MT8173_CLK_MM]);
>>> -
>>> - clk[MT8173_CLK_MFG] = devm_clk_get(&pdev->dev, "mfg");
>>> - if (IS_ERR(clk[MT8173_CLK_MFG]))
>>> - return PTR_ERR(clk[MT8173_CLK_MFG]);
>>> -
>>> - clk[MT8173_CLK_VENC] = devm_clk_get(&pdev->dev, "venc");
>>> - if (IS_ERR(clk[MT8173_CLK_VENC]))
>>> - return PTR_ERR(clk[MT8173_CLK_VENC]);
>>> -
>>> - clk[MT8173_CLK_VENC_LT] = devm_clk_get(&pdev->dev, "venc_lt");
>>> - if (IS_ERR(clk[MT8173_CLK_VENC_LT]))
>>> - return PTR_ERR(clk[MT8173_CLK_VENC_LT]);
>>> + return ERR_CAST(scp->base);
>>>
>>> scp->infracfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
>>> "infracfg");
>>> if (IS_ERR(scp->infracfg)) {
>>> dev_err(&pdev->dev, "Cannot find infracfg controller: %ld\n",
>>> PTR_ERR(scp->infracfg));
>>> - return PTR_ERR(scp->infracfg);
>>> + return ERR_CAST(scp->infracfg);
>>> }
>>>
>>> - for (i = 0; i < NUM_DOMAINS; i++) {
>>> + scp->domains = devm_kzalloc(&pdev->dev,
>>> + sizeof(*scp->domains) * num, GFP_KERNEL);
>>> + if (!scp->domains)
>>> + return ERR_PTR(-ENOMEM);
>>> +
>>> + pd_data = &scp->pd_data;
>>> +
>>> + pd_data->domains = devm_kzalloc(&pdev->dev,
>>> + sizeof(*pd_data->domains) * num, GFP_KERNEL);
>>> + if (!pd_data->domains)
>>> + return ERR_PTR(-ENOMEM);
>>> +
>>> + for (i = 0; i < num; i++) {
>>> struct scp_domain *scpd = &scp->domains[i];
>>> const struct scp_domain_data *data = &scp_domain_data[i];
>>>
>>> @@ -467,28 +386,54 @@ static int scpsys_probe(struct platform_device *pdev)
>>> if (PTR_ERR(scpd->supply) == -ENODEV)
>>> scpd->supply = NULL;
>>> else
>>> - return PTR_ERR(scpd->supply);
>>> + return ERR_CAST(scpd->supply);
>>> }
>>> }
>>>
>>> - pd_data->num_domains = NUM_DOMAINS;
>>> + pd_data->num_domains = num;
>>>
>>> - for (i = 0; i < NUM_DOMAINS; i++) {
>>> + init_clks(pdev, clk);
>>> +
>>> + for (i = 0; i < num; i++) {
>>> struct scp_domain *scpd = &scp->domains[i];
>>> struct generic_pm_domain *genpd = &scpd->genpd;
>>> const struct scp_domain_data *data = &scp_domain_data[i];
>>>
>>> + for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
>>> + struct clk *c = clk[data->clk_id[j]];
>>> +
>>> + if (IS_ERR(c)) {
>>> + dev_err(&pdev->dev, "%s: clk unavailable\n",
>>> + data->name);
>>> + return ERR_CAST(c);
>>> + }
>>> +
>>> + scpd->clk[j] = c;
>>
>> Put this in the else branch. Apart from that is there any reason you
>
> Do you mean to change like this?
>
> if (IS_ERR(c)) {
> ...
> return ERR_CAST(c);
> } else {
> scpd->clk[j] = c;
> }
>
> checkpatch.pl will warn for above code due to it returns in 'if' branch.
>
I tried that on top of next-20160706 and it checkpatch didn't throw any
warning. Which kernel version are based on?
>> moved the for up in the function? If not, I would prefer not to move it,
>> to make it easier to read the diff.
>
> The new 'for' block are far different from original one. And I think
> it's easy to read if we keep simple assign statements in the same block.
>
It's different in the sense that it checks if struct clk *c is an error.
I don't see the reason why we need to move it up in the file.
It's not too important but I would prefer not to move it if there is no
reason.
Regards,
Matthias
>> Apart from that, the patch looks good to me.
>> Sorry for the delay in responding.
>
> Thanks for your comments.
>
>
> Best regards,
>
> James
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-07-07 11:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-16 9:28 [PATCH v7 0/4] Mediatek MT2701 SCPSYS power domain support James Liao
[not found] ` <1463390894-32062-1-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-05-16 9:28 ` [PATCH v7 1/4] soc: mediatek: Refine scpsys to support multiple platform James Liao
2016-07-02 16:33 ` Matthias Brugger
[not found] ` <6762e420-0d68-0376-b584-bfc878b5e95f-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-07-06 5:39 ` James Liao
2016-07-07 11:20 ` Matthias Brugger [this message]
[not found] ` <577E3AE9.5080202-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-07-11 8:56 ` James Liao
2016-07-11 13:10 ` Matthias Brugger
[not found] ` <57839AE3.2070103-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-07-12 1:52 ` Yingjoe Chen
2016-07-12 3:34 ` James Liao
2016-07-12 8:21 ` Matthias Brugger
2016-05-16 9:28 ` [PATCH v7 3/4] soc: mediatek: Add MT2701 power dt-bindings James Liao
2016-05-16 9:28 ` [PATCH v7 4/4] soc: mediatek: Add MT2701 scpsys driver James Liao
[not found] ` <1463390894-32062-5-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-07-02 16:41 ` Matthias Brugger
2016-07-06 5:17 ` James Liao
2016-05-16 9:28 ` [PATCH v7 2/4] soc: mediatek: Init MT8173 scpsys driver earlier James Liao
[not found] ` <1463390894-32062-3-git-send-email-jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2016-07-02 16:35 ` Matthias Brugger
[not found] ` <34025ec4-19d3-8b25-d669-50c6f19159cd-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-07-06 5:22 ` James Liao
2016-07-08 12:47 ` Matthias Brugger
2016-07-12 9:01 ` Yong Wu
2016-10-26 14:54 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=577E3AE9.5080202@gmail.com \
--to=matthias.bgg-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=djkurtz-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=jamesjj.liao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).