From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keerthy Subject: Re: [PATCH v6 1/4] Documentation: mfd: LP873X: Add information for the mfd driver Date: Wed, 10 Aug 2016 08:26:01 +0530 Message-ID: <57AA97C1.8010004@ti.com> References: <1470635218-15951-1-git-send-email-j-keerthy@ti.com> <1470635218-15951-2-git-send-email-j-keerthy@ti.com> <20160809125037.GE5243@dell> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20160809125037.GE5243@dell> Sender: linux-gpio-owner@vger.kernel.org To: Lee Jones , Keerthy Cc: broonie@kernel.org, tony@atomide.com, linus.walleij@linaro.org, gnurou@gmail.com, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, robh+dt@kernel.org List-Id: devicetree@vger.kernel.org On Tuesday 09 August 2016 06:20 PM, Lee Jones wrote: > On Mon, 08 Aug 2016, Keerthy wrote: > >> The lp873x series of PMICs have a bunch of regulators and a couple >> of GPO(General Purpose Outputs). >> Add information for the MFD and regulator drivers. >> >> Acked-by: Rob Herring >> Signed-off-by: Keerthy > > These should be in chronological order. Rob could not have Acked the > patch before you sent it. > >> --- >> Changes in v6: >> >> * Added more formating for properties. >> >> Changes in v4: >> >> * Added the GPIO properties. >> >> Changes in v3: >> >> * Changed the example node lable to pmic from lp8733. >> >> Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++ >> 1 file changed, 59 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt > > Patch looks good though. > > I'll fix the nit above. Okay thanks. > > Applied, thanks. > >> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt >> new file mode 100644 >> index 0000000..1377c25 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt >> @@ -0,0 +1,59 @@ >> +TI LP873X PMIC MFD driver >> + >> +Required properties: >> + - compatible: "ti,lp8732", "ti,lp8733" >> + - reg: I2C slave address. >> + - gpio-controller: Marks the device node as a GPIO Controller. >> + - #gpio-cells: Should be two. The first cell is the pin number and >> + the second cell is used to specify flags. >> + See ../gpio/gpio.txt for more information. >> + - regulators: List of child nodes that specify the regulator >> + initialization data. >> +Example: >> + >> +pmic: lp8733@60 { >> + compatible = "ti,lp8733"; >> + reg = <0x60>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + regulators { >> + lp8733_buck0: buck0 { >> + regulator-name = "lp8733-buck0"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1400000>; >> + regulator-min-microamp = <1500000>; >> + regulator-max-microamp = <4000000>; >> + regulator-ramp-delay = <10000>; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + >> + lp8733_buck1: buck1 { >> + regulator-name = "lp8733-buck1"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1400000>; >> + regulator-min-microamp = <1500000>; >> + regulator-max-microamp = <4000000>; >> + regulator-ramp-delay = <10000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + lp8733_ldo0: ldo0 { >> + regulator-name = "lp8733-ldo0"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + lp8733_ldo1: ldo1 { >> + regulator-name = "lp8733-ldo1"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> + }; >> +}; >