[RESEND PATCH v3 0/3] ARM: cleanup PCI specific configs

[RESEND PATCH v3 0/3] ARM: cleanup PCI specific configs

[Kishon Vijay Abraham I]

This series was initially sent to add support for two PCIe
ports in dra7. This included selecting PCI_DOMAINS config
in SOC_DRA7XX.

However from the review, PCI_DOMAINS can instead be selected
from ARCH_MULTIPLATFORM. This is fixed in this series along
with removing PCI_DOMAINS from other configs.

Since this series was initially sent to add support for
two PCIe ports in dra7, it has been tested to see if there
are regressions with 1 PCIe port. Though testing of 2 PCIe ports
is not done while sending this patch series, it has been verified
before in few of the customer boards.

Changes from v2:
*) v2 removed MIGHT_HAVE_PCI from platforms that are not
   ARCH_MULTIPLATFORM. Fixed it in this version

Changes from v1:
*) select PCI_DOMAINS config from ARCH_MULTIPLATFORM
*) Fix *MIGHT_HAVE_PCI* config from being selected redundantly

Kishon Vijay Abraham I (3):
  ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes
  ARM: Fix *MIGHT_HAVE_PCI* config from being selected redundantly
  ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

 arch/arm/Kconfig                 |    1 +
 arch/arm/boot/dts/dra7.dtsi      |    2 ++
 arch/arm/mach-at91/Kconfig       |    1 -
 arch/arm/mach-axxia/Kconfig      |    2 --
 arch/arm/mach-cns3xxx/Kconfig    |    1 -
 arch/arm/mach-exynos/Kconfig     |    2 --
 arch/arm/mach-imx/Kconfig        |    2 --
 arch/arm/mach-integrator/Kconfig |    1 -
 arch/arm/mach-keystone/Kconfig   |    2 --
 arch/arm/mach-shmobile/Kconfig   |    1 -
 arch/arm/mach-spear/Kconfig      |    1 -
 arch/arm/mach-versatile/Kconfig  |    1 -
 12 files changed, 3 insertions(+), 14 deletions(-)

-- 
1.7.9.5

[RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux, pci-domain" property for pci dt nodes

[Kishon Vijay Abraham I]

Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
property to assign a PCI domain number to each of the host
bridges.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d9bfb94..8a45385 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -301,6 +301,7 @@
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <0>;
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
@@ -336,6 +337,7 @@
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <1>;
 				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
-- 
1.7.9.5

[RFT RESEND PATCH v3 2/3] ARM: Fix *MIGHT_HAVE_PCI* config from being selected redundantly

[Kishon Vijay Abraham I]

*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
Fix it from getting redundantly selected in all
ARCH_MULTIPLATFORM based machines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Kconfig       |    1 -
 arch/arm/mach-axxia/Kconfig      |    1 -
 arch/arm/mach-exynos/Kconfig     |    1 -
 arch/arm/mach-integrator/Kconfig |    1 -
 arch/arm/mach-keystone/Kconfig   |    1 -
 arch/arm/mach-spear/Kconfig      |    1 -
 arch/arm/mach-versatile/Kconfig  |    1 -
 7 files changed, 7 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5204395..841e924 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -55,7 +55,6 @@ config SOC_AT91RM9200
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
-	select MIGHT_HAVE_PCI
 	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 6c6d5e7..ee2e131 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,7 +7,6 @@ config ARCH_AXXIA
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f820de..ee8a99c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -126,7 +126,6 @@ config SOC_EXYNOS5440
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 599f973..cefe44f 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -21,7 +21,6 @@ if ARCH_INTEGRATOR
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select INTEGRATOR_AP_TIMER
-	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 8ff61be..1507287 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b7260c2..1b6cae5 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -20,7 +20,6 @@ config ARCH_SPEAR13XX
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	help
 	  Supports for ARM's SPEAR13XX family
 
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index b0cc262..c257d40 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -9,7 +9,6 @@ config ARCH_VERSATILE
 	select CPU_ARM926T
 	select ICST
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
-- 
1.7.9.5

[RFT RESEND PATCH v3 3/3] ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

[Kishon Vijay Abraham I]

PCI_DOMAINS config should be selected for any SoCs
having more than a single PCIe controller. Without PCI_DOMAINS
config, only one PCIe controller gets registered.

Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
it doesn't harm even if a platform has a single PCIe port.
Also remove PCI_DOMAINS being selected from other platform
specific configs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/Kconfig               |    1 +
 arch/arm/mach-axxia/Kconfig    |    1 -
 arch/arm/mach-cns3xxx/Kconfig  |    1 -
 arch/arm/mach-exynos/Kconfig   |    1 -
 arch/arm/mach-imx/Kconfig      |    2 --
 arch/arm/mach-keystone/Kconfig |    1 -
 arch/arm/mach-shmobile/Kconfig |    1 -
 7 files changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a9c4e48..fb1b867 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -337,6 +337,7 @@ config ARCH_MULTIPLATFORM
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
+	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
 
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index ee2e131..fe627cb 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,7 +7,6 @@ config ARCH_AXXIA
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
 	  This enables support for the LSI Axxia devices.
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index eb14a0f..5fd836b 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@ menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ee8a99c..18f0c85 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -126,7 +126,6 @@ config SOC_EXYNOS5440
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
 	help
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ee9a318..757cd11 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -523,7 +523,6 @@ config SOC_IMX6Q
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
-	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6
 
@@ -569,7 +568,6 @@ config SOC_LS1021A
 	bool "Freescale LS1021A support"
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA if ARM_LPAE
 	help
 	  This enables support for Freescale LS1021A processor.
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 1507287..24bd64d 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4a48c9f..09817ba 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,7 +22,6 @@ config ARCH_RCAR_GEN2
 	select PM_GENERIC_DOMAINS
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
-	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
-- 
1.7.9.5

Re: [RFT RESEND PATCH v3 2/3] ARM: Fix *MIGHT_HAVE_PCI* config from being selected redundantly

[Krzysztof Kozlowski]

On 08/10/2016 02:33 PM, Kishon Vijay Abraham I wrote:
> *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
> Fix it from getting redundantly selected in all

I don't like the "fix" here and in subject. There is no error, no
warning, no issue to be fixed. Fix might be a candidate to backport
(stable, vendor etc) but this just removes something which is not needed.

With the change in subject, for exynos:
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [RFT RESEND PATCH v3 3/3] ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM

[Krzysztof Kozlowski]

On 08/10/2016 02:33 PM, Kishon Vijay Abraham I wrote:
> PCI_DOMAINS config should be selected for any SoCs
> having more than a single PCIe controller. Without PCI_DOMAINS
> config, only one PCIe controller gets registered.
> 
> Select PCI_DOMAINS in ARCH_MULTIPLATFORM if PCI is selected, since
> it doesn't harm even if a platform has a single PCIe port.
> Also remove PCI_DOMAINS being selected from other platform
> specific configs.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  arch/arm/Kconfig               |    1 +
>  arch/arm/mach-axxia/Kconfig    |    1 -
>  arch/arm/mach-cns3xxx/Kconfig  |    1 -
>  arch/arm/mach-exynos/Kconfig   |    1 -
>  arch/arm/mach-imx/Kconfig      |    2 --
>  arch/arm/mach-keystone/Kconfig |    1 -
>  arch/arm/mach-shmobile/Kconfig |    1 -
>  7 files changed, 1 insertion(+), 7 deletions(-)

For Exynos5440 output is equal and we do not use PCI on other SoCs, so:

Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

[Tony Lindgren]

* Kishon Vijay Abraham I <kishon@ti.com> [160810 05:34]:
> Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
> property to assign a PCI domain number to each of the host
> bridges.

Is this patch safe to apply without the other changes?

Regards,

Tony

Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

[Kishon Vijay Abraham I]

Hi Tony,

On Friday 26 August 2016 09:00 PM, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon@ti.com> [160810 05:34]:
>> Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
>> property to assign a PCI domain number to each of the host
>> bridges.
> 
> Is this patch safe to apply without the other changes?

Yes. I verified pcie on dra7x by applying only this patch and it doesn't break
anything.

Thanks
Kishon

Re: [RESEND PATCH v3 1/3] ARM: dts: DRA7: Add "linux,pci-domain" property for pci dt nodes

[Tony Lindgren]

* Kishon Vijay Abraham I <kishon@ti.com> [160830 04:06]:
> Hi Tony,
> 
> On Friday 26 August 2016 09:00 PM, Tony Lindgren wrote:
> > * Kishon Vijay Abraham I <kishon@ti.com> [160810 05:34]:
> >> Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain"
> >> property to assign a PCI domain number to each of the host
> >> bridges.
> > 
> > Is this patch safe to apply without the other changes?
> 
> Yes. I verified pcie on dra7x by applying only this patch and it doesn't break
> anything.

OK thanks for testing, I'm picking the dts change into omap-for-v4.9/dt
branch.

The other patches you probably should upload to RMKs patch system
if no more comments.

Regards,

Tony