From mboxrd@z Thu Jan 1 00:00:00 1970 From: Viresh Kumar Subject: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs Date: Fri, 25 May 2018 16:01:59 +0530 Message-ID: <5821a6dbe413b5a217ca1e24ddf8ebfa63ba6ef0.1527244201.git.viresh.kumar@linaro.org> References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org To: arm@kernel.org, Simon Horman , Magnus Damm , Rob Herring , Mark Rutland Cc: Viresh Kumar , Vincent Guittot , ionela.voinescu@arm.com, Daniel Lezcano , chris.redpath@arm.com, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The OPP properties, like "operating-points", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can create an OPP table. Add such missing properties. Fix other missing property (clock latency) as well to make it all work. Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/r8a7743.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 142949d7066f..e4fb31c4f0ee 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -98,8 +98,17 @@ reg = <1>; clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { -- 2.15.0.194.g9af6a3dea062