devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Jaechul Lee <jcsing.lee@samsung.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>, Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Andi Shyti <andi.shyti@samsung.com>,
	beomho.seo@samsung.com, galaxyra@gmail.com,
	linux-arm-kernel@lists.infradead.org,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v6 2/3] input: tm2-touchkey: Add touchkey driver support for TM2
Date: Mon, 09 Jan 2017 16:29:54 +0900	[thread overview]
Message-ID: <58733BF2.7040304@samsung.com> (raw)
In-Reply-To: <1483946535-4703-3-git-send-email-jcsing.lee@samsung.com>

Hi Jaechul,

Looks good to me. I tested this patch on TM2 board.
It is well working.

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>

Best Regards,
Chanwoo Choi

On 2017년 01월 09일 16:22, Jaechul Lee wrote:
> This patch adds support for the TM2 touch key and led
> functionality.
> 
> The driver interfaces with userspace through an input device and
> reports KEY_PHONE and KEY_BACK event types. LED brightness can be
> controlled by "/sys/class/leds/tm2-touchkey/brightness".
> 
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  drivers/input/keyboard/Kconfig        |  11 ++
>  drivers/input/keyboard/Makefile       |   1 +
>  drivers/input/keyboard/tm2-touchkey.c | 287 ++++++++++++++++++++++++++++++++++
>  3 files changed, 299 insertions(+)
>  create mode 100644 drivers/input/keyboard/tm2-touchkey.c
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index cbd75cf..97acd65 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called tc3589x-keypad.
>  
> +config KEYBOARD_TM2_TOUCHKEY
> +	tristate "TM2 touchkey support"
> +	depends on I2C
> +	depends on LEDS_CLASS
> +	help
> +	  Say Y here to enable device driver for tm2-touchkey with
> +	  LED control for the Exynos5433 TM2 board.
> +
> +	  To compile this driver as a module, choose M here.
> +	  module will be called tm2-touchkey.
> +
>  config KEYBOARD_TWL4030
>  	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
>  	depends on TWL4030_CORE
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index d9f4cfc..7d9acff 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC)	+= sun4i-lradc-keys.o
>  obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
>  obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
>  obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
> +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY)	+= tm2-touchkey.o
>  obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
>  obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
>  obj-$(CONFIG_KEYBOARD_W90P910)		+= w90p910_keypad.o
> diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
> new file mode 100644
> index 0000000..e927d06
> --- /dev/null
> +++ b/drivers/input/keyboard/tm2-touchkey.c
> @@ -0,0 +1,287 @@
> +/*
> + * TM2 touchkey device driver
> + *
> + * Copyright 2005 Phil Blundell
> + * Copyright 2016 Samsung Electronics Co., Ltd.
> + *
> + * Author: Beomho Seo <beomho.seo@samsung.com>
> + * Author: Jaechul Lee <jcsing.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define TM2_TOUCHKEY_DEV_NAME		"tm2-touchkey"
> +#define TM2_TOUCHKEY_KEYCODE_REG	0x03
> +#define TM2_TOUCHKEY_BASE_REG		0x00
> +#define TM2_TOUCHKEY_CMD_LED_ON		0x10
> +#define TM2_TOUCHKEY_CMD_LED_OFF	0x20
> +#define TM2_TOUCHKEY_BIT_PRESS_EV	BIT(3)
> +#define TM2_TOUCHKEY_BIT_KEYCODE	GENMASK(2, 0)
> +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN	2500000
> +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX	3300000
> +
> +enum {
> +	TM2_TOUCHKEY_KEY_MENU = 0x1,
> +	TM2_TOUCHKEY_KEY_BACK,
> +};
> +
> +enum {
> +	TM2_TOUCHKEY_SUPPLIES_VCC,
> +	TM2_TOUCHKEY_SUPPLIES_VDD,
> +};
> +
> +struct tm2_touchkey_data {
> +	struct i2c_client *client;
> +	struct input_dev *input_dev;
> +	struct led_classdev led_dev;
> +	struct regulator_bulk_data regulators[2];
> +
> +	u8 keycode_type;
> +	u8 pressed;
> +};
> +
> +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
> +						enum led_brightness brightness)
> +{
> +	struct tm2_touchkey_data *touchkey =
> +	    container_of(led_dev, struct tm2_touchkey_data, led_dev);
> +	u32 volt;
> +	u8 data;
> +
> +	if (brightness == LED_OFF) {
> +		volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
> +		data = TM2_TOUCHKEY_CMD_LED_OFF;
> +	} else {
> +		volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
> +		data = TM2_TOUCHKEY_CMD_LED_ON;
> +	}
> +
> +	regulator_set_voltage(
> +		touchkey->regulators[TM2_TOUCHKEY_SUPPLIES_VDD].consumer,
> +		volt, volt);
> +	i2c_smbus_write_byte_data(touchkey->client,
> +						TM2_TOUCHKEY_BASE_REG, data);
> +}
> +
> +static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
> +{
> +	int ret = 0;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators),
> +						touchkey->regulators);
> +	if (ret)
> +		return ret;
> +
> +	/* waiting for device initialization, at least 150ms */
> +	msleep(150);
> +
> +	return 0;
> +}
> +
> +static void tm2_touchkey_power_disable(void *data)
> +{
> +	struct tm2_touchkey_data *touchkey = data;
> +
> +	regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators),
> +						touchkey->regulators);
> +}
> +
> +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
> +{
> +	struct tm2_touchkey_data *touchkey = devid;
> +	u32 data;
> +
> +	data = i2c_smbus_read_byte_data(touchkey->client,
> +					TM2_TOUCHKEY_KEYCODE_REG);
> +
> +	if (data < 0) {
> +		dev_err(&touchkey->client->dev, "Failed to read i2c data\n");
> +		return IRQ_HANDLED;
> +	}
> +
> +	touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE;
> +	touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV);
> +
> +	if (touchkey->keycode_type != TM2_TOUCHKEY_KEY_MENU &&
> +	    touchkey->keycode_type != TM2_TOUCHKEY_KEY_BACK) {
> +		dev_warn(&touchkey->client->dev, "Skip unhandled keycode(%d)\n",
> +							touchkey->keycode_type);
> +		return IRQ_HANDLED;
> +	}
> +
> +	if (!touchkey->pressed) {
> +		input_report_key(touchkey->input_dev, KEY_PHONE, 0);
> +		input_report_key(touchkey->input_dev, KEY_BACK, 0);
> +	} else {
> +		if (touchkey->keycode_type == TM2_TOUCHKEY_KEY_MENU)
> +			input_report_key(touchkey->input_dev,
> +					 KEY_PHONE, 1);
> +		else
> +			input_report_key(touchkey->input_dev,
> +					 KEY_BACK, 1);
> +	}
> +	input_sync(touchkey->input_dev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int tm2_touchkey_probe(struct i2c_client *client,
> +					const struct i2c_device_id *id)
> +{
> +	struct tm2_touchkey_data *touchkey;
> +	int ret;
> +
> +	ret = i2c_check_functionality(client->adapter,
> +				      I2C_FUNC_SMBUS_BYTE |
> +				      I2C_FUNC_SMBUS_BYTE_DATA);
> +	if (!ret) {
> +		dev_err(&client->dev, "No I2C functionality found\n");
> +		return -ENODEV;
> +	}
> +
> +	touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL);
> +	if (!touchkey)
> +		return -ENOMEM;
> +
> +	touchkey->client = client;
> +	i2c_set_clientdata(client, touchkey);
> +
> +	/* regulators */
> +	touchkey->regulators[TM2_TOUCHKEY_SUPPLIES_VCC].supply = "vcc";
> +	touchkey->regulators[TM2_TOUCHKEY_SUPPLIES_VDD].supply = "vdd";
> +	ret = devm_regulator_bulk_get(&client->dev,
> +					ARRAY_SIZE(touchkey->regulators),
> +					touchkey->regulators);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to get regulators\n");
> +		return ret;
> +	}
> +
> +	/* power */
> +	ret = tm2_touchkey_power_enable(touchkey);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to enable power\n");
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(&client->dev,
> +					tm2_touchkey_power_disable, touchkey);
> +	if (ret)
> +		return ret;
> +
> +	/* input device */
> +	touchkey->input_dev = devm_input_allocate_device(&client->dev);
> +	if (!touchkey->input_dev) {
> +		dev_err(&client->dev, "Failed to alloc input device\n");
> +		return -ENOMEM;
> +	}
> +	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
> +	touchkey->input_dev->id.bustype = BUS_I2C;
> +
> +	set_bit(EV_KEY, touchkey->input_dev->evbit);
> +	input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
> +	input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
> +
> +	input_set_drvdata(touchkey->input_dev, touchkey);
> +
> +	ret = input_register_device(touchkey->input_dev);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to register input device\n");
> +		return ret;
> +	}
> +
> +	/* irq */
> +	ret = devm_request_threaded_irq(&client->dev,
> +					client->irq, NULL,
> +					tm2_touchkey_irq_handler,
> +					IRQF_ONESHOT, TM2_TOUCHKEY_DEV_NAME,
> +					touchkey);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to request threaded irq\n");
> +		return ret;
> +	}
> +
> +	/* led device */
> +	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
> +	touchkey->led_dev.brightness = LED_FULL;
> +	touchkey->led_dev.max_brightness = LED_FULL;
> +	touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
> +
> +	ret = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Failed to register touchkey led\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused tm2_touchkey_suspend(struct device *dev)
> +{
> +	struct tm2_touchkey_data *touchkey = dev_get_drvdata(dev);
> +
> +	disable_irq(touchkey->client->irq);
> +	tm2_touchkey_power_disable(touchkey);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused tm2_touchkey_resume(struct device *dev)
> +{
> +	struct tm2_touchkey_data *touchkey = dev_get_drvdata(dev);
> +	int ret;
> +
> +	enable_irq(touchkey->client->irq);
> +	ret = tm2_touchkey_power_enable(touchkey);
> +	if (ret)
> +		dev_err(dev, "Failed to enable power\n");
> +
> +	return ret;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, tm2_touchkey_suspend,
> +							tm2_touchkey_resume);
> +
> +static const struct i2c_device_id tm2_touchkey_id_table[] = {
> +	{TM2_TOUCHKEY_DEV_NAME, 0},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
> +
> +static const struct of_device_id tm2_touchkey_of_match[] = {
> +	{.compatible = "cypress,tm2-touchkey",},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);
> +
> +static struct i2c_driver tm2_touchkey_driver = {
> +	.driver = {
> +		.name = TM2_TOUCHKEY_DEV_NAME,
> +		.pm = &tm2_touchkey_pm_ops,
> +		.of_match_table = of_match_ptr(tm2_touchkey_of_match),
> +	},
> +	.probe = tm2_touchkey_probe,
> +	.id_table = tm2_touchkey_id_table,
> +};
> +
> +module_i2c_driver(tm2_touchkey_driver);
> +
> +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
> +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>");
> +MODULE_DESCRIPTION("Samsung touchkey driver");
> +MODULE_LICENSE("GPL v2");
> 

  reply	other threads:[~2017-01-09  7:29 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170109072218epcas1p38d937ae34dcd7ece7b9f092b1527a691@epcas1p3.samsung.com>
2017-01-09  7:22 ` [PATCH v6 0/3] Add touch key driver support for TM2 Jaechul Lee
     [not found]   ` <CGME20170109072218epcas1p34a76ad70fd1d0d02c5a12e6aaac5b806@epcas1p3.samsung.com>
2017-01-09  7:22     ` [PATCH v6 1/3] input: Add support for the tm2 touchkey device driver Jaechul Lee
     [not found]   ` <CGME20170109072218epcas1p1f95be49f7f466712c146d1e9163601e1@epcas1p1.samsung.com>
2017-01-09  7:22     ` [PATCH v6 2/3] input: tm2-touchkey: Add touchkey driver support for TM2 Jaechul Lee
2017-01-09  7:29       ` Chanwoo Choi [this message]
2017-01-15  7:11       ` Dmitry Torokhov
2017-01-16  7:24         ` Jaechul Lee
     [not found]   ` <CGME20170109072219epcas5p2b1dd8d38c4ae6bd5727e68c4ecaf7f24@epcas5p2.samsung.com>
2017-01-09  7:22     ` [PATCH v6 3/3] arm64: dts: exynos: Add tm2 touchkey node Jaechul Lee
2017-01-09  7:31       ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58733BF2.7040304@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=andi.shyti@samsung.com \
    --cc=beomho.seo@samsung.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=galaxyra@gmail.com \
    --cc=javier@osg.samsung.com \
    --cc=jcsing.lee@samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).