From mboxrd@z Thu Jan 1 00:00:00 1970 From: Balakrishna Godavarthi Subject: Re: [PATCH v12 1/7] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990 Date: Thu, 02 Aug 2018 23:35:54 +0530 Message-ID: <58791a55af5532d476febddea6756fdb@codeaurora.org> References: <20180802132518.8680-1-bgodavar@codeaurora.org> <20180802132518.8680-2-bgodavar@codeaurora.org> <20180802172043.GN68975@google.com> <366e23679cabb332b1ecde8396570f66@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <366e23679cabb332b1ecde8396570f66@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Matthias Kaehlcke Cc: marcel@holtmann.org, johan.hedberg@gmail.com, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-bluetooth@vger.kernel.org, thierry.escande@linaro.org, rtatiya@codeaurora.org, hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Matthias, On 2018-08-02 23:24, Balakrishna Godavarthi wrote: > Hi Matthias, > > On 2018-08-02 22:50, Matthias Kaehlcke wrote: >> On Thu, Aug 02, 2018 at 06:55:12PM +0530, Balakrishna Godavarthi >> wrote: >>> This patch enables regulators for the Qualcomm Bluetooth wcn3990 >>> controller. >>> >>> Signed-off-by: Balakrishna Godavarthi >>> Reviewed-by: Rob Herring >>> --- >>> .../bindings/net/qualcomm-bluetooth.txt | 26 >>> +++++++++++++++++-- >>> 1 file changed, 24 insertions(+), 2 deletions(-) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >>> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >>> index 0ea18a53cc29..2175174415ee 100644 >>> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >>> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >>> @@ -10,12 +10,22 @@ device the slave device is attached to. >>> Required properties: >>> - compatible: should contain one of the following: >>> * "qcom,qca6174-bt" >>> + * "qcom,wcn3990-bt" >>> + >>> +Optional properties for compatible string qcom,qca6174-bt: >>> >>> -Optional properties: >>> - enable-gpios: gpio specifier used to enable chip >>> - clocks: clock provided to the controller (SUSCLK_32KHZ) >>> >>> -Example: >>> +Optional properties for compatible string qcom,wcn3990-bt: >>> + >>> + - vddio-supply: Bluetooth wcn3990 VDD_IO supply regulator handle. >>> + - vddxo-supply: Bluetooth wcn3990 VDD_XO supply regulator handle. >>> + - vddrf-supply: Bluetooth wcn3990 VDD_RF supply regulator handle. >>> + - vddch0-supply: Bluetooth wcn3990 VDD_CH0 supply regulator handle. >> >> Are these really optional? If I understand correctly the driver >> expects the regulators to be there. Even if it could do with only some >> regulators specified the devm_regulator_bulk_get() call would fail if >> not all requested regulators are available. > > yes they are required along with compatible string "qcom,wcn3990-bt". > i have taken reference wrt compatible string "qcom,qca6174-bt". > In which clocks and enable-gpios are required for driver to work, but > it was written as optional in doc. > > below snippet from hci_qca.c for qcom,qca6174-bt. > > if (IS_ERR(qcadev->bt_en)) { > dev_err(&serdev->dev, "failed to acquire enable gpio\n"); > return PTR_ERR(qcadev->bt_en); > } > > qcadev->susclk = devm_clk_get(&serdev->dev, NULL); > if (IS_ERR(qcadev->susclk)) { > dev_err(&serdev->dev, "failed to acquire clk\n"); > return PTR_ERR(qcadev->susclk); > } technically it is not correct then i will update as below Required properties for compatible string qcom,wcn3990-bt: - vddio-supply: Bluetooth wcn3990 VDD_IO supply regulator handle. - vddxo-supply: Bluetooth wcn3990 VDD_XO supply regulator handle. - vddrf-supply: Bluetooth wcn3990 VDD_RF supply regulator handle. - vddch0-supply: Bluetooth wcn3990 VDD_CH0 supply regulator handle. Optional properties for compatible string qcom,wcn3990-bt: - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt are they above ok? -- Regards Balakrishna.