devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Felipe Balbi
	<felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [RESEND PATCH v3 4/8] phy: phy-mt65xx-usb3: move clock from phy node into port nodes
Date: Thu, 9 Mar 2017 13:51:09 +0530	[thread overview]
Message-ID: <58C11075.8000409@ti.com> (raw)
In-Reply-To: <1488808169-6031-4-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Hi,

On Monday 06 March 2017 07:19 PM, Chunfeng Yun wrote:
> the reference clock of HighSpeed port is 48M which comes from PLL;
> the reference clock of SuperSpeed port is 26M which usually comes
> from 26M oscillator directly, but some SoCs are not, add it for
> compatibility, and put them into port node for flexibility.

Won't this break the old dt compatiblity? Making change in dt is fine as long
as older dtb's are still supported.

Thanks
Kishon
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  drivers/phy/phy-mt65xx-usb3.c |   21 +++++++++++----------
>  1 file changed, 11 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> index 7fff482..f4a3505 100644
> --- a/drivers/phy/phy-mt65xx-usb3.c
> +++ b/drivers/phy/phy-mt65xx-usb3.c
> @@ -153,6 +153,7 @@ struct mt65xx_phy_pdata {
>  struct mt65xx_phy_instance {
>  	struct phy *phy;
>  	void __iomem *port_base;
> +	struct clk *ref_clk;	/* reference clock of anolog phy */
>  	u32 index;
>  	u8 type;
>  };
> @@ -160,7 +161,6 @@ struct mt65xx_phy_instance {
>  struct mt65xx_u3phy {
>  	struct device *dev;
>  	void __iomem *sif_base;	/* only shared sif */
> -	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
>  	const struct mt65xx_phy_pdata *pdata;
>  	struct mt65xx_phy_instance **phys;
>  	int nphys;
> @@ -449,9 +449,9 @@ static int mt65xx_phy_init(struct phy *phy)
>  	struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
>  	int ret;
>  
> -	ret = clk_prepare_enable(u3phy->u3phya_ref);
> +	ret = clk_prepare_enable(instance->ref_clk);
>  	if (ret) {
> -		dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
> +		dev_err(u3phy->dev, "failed to enable ref_clk\n");
>  		return ret;
>  	}
>  
> @@ -494,7 +494,7 @@ static int mt65xx_phy_exit(struct phy *phy)
>  	if (instance->type == PHY_TYPE_USB2)
>  		phy_instance_exit(u3phy, instance);
>  
> -	clk_disable_unprepare(u3phy->u3phya_ref);
> +	clk_disable_unprepare(instance->ref_clk);
>  	return 0;
>  }
>  
> @@ -594,12 +594,6 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
>  		return PTR_ERR(u3phy->sif_base);
>  	}
>  
> -	u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
> -	if (IS_ERR(u3phy->u3phya_ref)) {
> -		dev_err(dev, "error to get u3phya_ref\n");
> -		return PTR_ERR(u3phy->u3phya_ref);
> -	}
> -
>  	port = 0;
>  	for_each_child_of_node(np, child_np) {
>  		struct mt65xx_phy_instance *instance;
> @@ -634,6 +628,13 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
>  			goto put_child;
>  		}
>  
> +		instance->ref_clk = devm_clk_get(&phy->dev, "ref");
> +		if (IS_ERR(instance->ref_clk)) {
> +			dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
> +			retval = PTR_ERR(instance->ref_clk);
> +			goto put_child;
> +		}
> +
>  		instance->phy = phy;
>  		instance->index = port;
>  		phy_set_drvdata(phy, instance);
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-03-09  8:21 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-06 13:49 [RESEND PATCH v3 1/8] phy: phy-mt65xx-usb3: improve RX detection stable time Chunfeng Yun
     [not found] ` <1488808169-6031-1-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-06 13:49   ` [RESEND PATCH v3 2/8] phy: phy-mt65xx-usb3: increase LFPS filter threshold Chunfeng Yun
2017-03-06 13:49   ` [RESEND PATCH v3 3/8] phy: phy-mt65xx-usb3: split SuperSpeed port into two ones Chunfeng Yun
2017-03-06 13:49   ` [RESEND PATCH v3 4/8] phy: phy-mt65xx-usb3: move clock from phy node into port nodes Chunfeng Yun
     [not found]     ` <1488808169-6031-4-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-03-09  8:21       ` Kishon Vijay Abraham I [this message]
     [not found]         ` <58C11075.8000409-l0cyMroinI0@public.gmane.org>
2017-03-09  8:42           ` Chunfeng Yun
2017-03-06 13:49   ` [RESEND PATCH v3 5/8] phy: phy-mt65xx-usb3: add support for new version phy Chunfeng Yun
2017-03-06 13:49   ` [RESEND PATCH v3 6/8] arm64: dts: mt8173: split usb SuperSpeed port into two ports Chunfeng Yun
2017-03-06 13:49   ` [RESEND PATCH v3 7/8] arm64: dts: mt8173: move clock from phy node into port nodes Chunfeng Yun
2017-03-06 13:49 ` [RESEND PATCH v3 8/8] dt-bindings: phy-mt65xx-usb: add support for new version phy Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58C11075.8000409@ti.com \
    --to=kishon-l0cymroini0@public.gmane.org \
    --cc=chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=felipe.balbi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).