Re: Re: [PATCH v4 09/22] arm64: dts: allwinner: h6: Add HDMI audio node

["Jernej Škrabec" <jernej.skrabec@siol.net>]

Dne ponedeljek, 21. september 2020 ob 19:23:49 CEST je Clément Péron 
napisal(a):
> Hi Maxime,
> 
> On Mon, 21 Sep 2020 at 15:59, Maxime Ripard <maxime@cerno.tech> wrote:
> >
> > On Mon, Sep 21, 2020 at 12:27:18PM +0200, Clément Péron wrote:
> > > From: Jernej Skrabec <jernej.skrabec@siol.net>
> > >
> > > Add a simple-soundcard to link audio between HDMI and I2S.
> > >
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > > Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> > > Signed-off-by: Clément Péron <peron.clem@gmail.com>
> > > ---
> > >  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++
> > >  1 file changed, 33 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/
boot/dts/allwinner/sun50i-h6.dtsi
> > > index 28c77d6872f6..a8853ee7885a 100644
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > @@ -67,6 +67,25 @@ de: display-engine {
> > >               status = "disabled";
> > >       };
> > >
> > > +     hdmi_sound: hdmi-sound {
> > > +             compatible = "simple-audio-card";
> > > +             simple-audio-card,format = "i2s";
> > > +             simple-audio-card,name = "sun50i-h6-hdmi";
> > > +             simple-audio-card,mclk-fs = <128>;
> > > +             simple-audio-card,frame-inversion;
> > > +             status = "disabled";
> > > +
> > > +             simple-audio-card,codec {
> > > +                     sound-dai = <&hdmi>;
> > > +             };
> > > +
> > > +             simple-audio-card,cpu {
> > > +                     sound-dai = <&i2s1>;
> > > +                     dai-tdm-slot-num = <2>;
> > > +                     dai-tdm-slot-width = <32>;
> >
> > It looks weird to have both some TDM setup here, and yet the format in
> > i2s?
> 
> Yes, I agree I will check if it's really needed.

I think this was explained before. Anyway, this is needed to force width to 
32, no matter actual sample width. That's a requirement of HDMI codec. I 
believe Marcus Cooper have another codec which also needs fixed width.

There is no similar property for I2S, so TDM one is used here.

Best regards,
Jernej

> 
> Clement
> 
> >
> > Maxime
>