From: Wei Xu <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
To: Xiaowei Song
<songxiaowei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: suzhuangluan-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v11 1/3] PCI: hisi: Add DT binding for PCIe of Kirin SoC series
Date: Mon, 19 Jun 2017 11:44:51 +0100 [thread overview]
Message-ID: <5947AB23.20402@hisilicon.com> (raw)
In-Reply-To: <20170619102349.50652-2-songxiaowei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Hi Xiaowei,
On 2017/6/19 11:23, Xiaowei Song wrote:
Please add some commit message.
> Cc: Guodong Xu <guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Xiaowei Song <songxiaowei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
I have picked up the patch from [1] and
the pull request has been merged into ARM SoC tree.
Please do not resend the same patch.
Thanks!
[1]:https://lkml.org/lkml/2017/6/14/1055
Best Regards,
Wei
> .../devicetree/bindings/pci/kirin-pcie.txt | 55 ++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
>
> diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> new file mode 100644
> index 000000000000..c2be01270ec5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> @@ -0,0 +1,55 @@
> +HiSilicon Kirin SoCs PCIe host DT description
> +
> +Kirin PCIe host controller is based on Designware PCI core.
> +It shares common functions with PCIe Designware core driver
> +and inherits common properties defined in
> +Documentation/devicetree/bindings/pci/designware-pci.txt.
> +
> +Additional properties are described here:
> +
> +Required properties
> +- compatible:
> + "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
> +- reg: Should contain rc_dbi, apb, phy, config registers location and length.
> +- reg-names: Must include the following entries:
> + "dbi": controller configuration registers;
> + "apb": apb Ctrl register defined by Kirin;
> + "phy": apb PHY register defined by Kirin;
> + "config": PCIe configuration space registers.
> +- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
> +
> +Optional properties:
> +
> +Example based on kirin960:
> +
> + pcie@f4000000 {
> + compatible = "hisilicon,kirin960-pcie";
> + reg = <0x0 0xf4000000 0x0 0x1000>,
> + <0x0 0xff3fe000 0x0 0x1000>,
> + <0x0 0xf3f20000 0x0 0x40000>,
> + <0x0 0xf4000000 0x0 0x2000>;
> + reg-names = "dbi","apb","phy", "config";
> + bus-range = <0x0 0x1>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + ranges = <0x02000000 0x0 0x0
> + 0x0 0xf5000000
> + 0x0 0x2000000>;
> + num-lanes = <1>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0xf800 0 0 7>;
> + interrupt-map = <0x0 0 0 1 &gic 0 282 4>,
> + <0x0 0 0 2 &gic 0 283 4>,
> + <0x0 0 0 3 &gic 0 284 4>,
> + <0x0 0 0 4 &gic 0 285 4>;
> + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
> + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
> + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
> + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
> + <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
> + clock-names = "pcie_phy_ref", "pcie_aux",
> + "pcie_apb_phy", "pcie_apb_sys",
> + "pcie_aclk";
> + reset-gpios = <&gpio11 1 0>;
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-19 10:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 10:23 [PATCH v11 0/3]add PCIe driver for Kirin PCIe Xiaowei Song
2017-06-19 10:23 ` [PATCH v11 1/3] PCI: hisi: Add DT binding for PCIe of Kirin SoC series Xiaowei Song
[not found] ` <20170619102349.50652-2-songxiaowei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2017-06-19 10:44 ` Wei Xu [this message]
2017-06-19 10:50 ` Wei Xu
2017-06-19 10:23 ` [PATCH v11 2/3] PCI: dwc: kirin: add PCIe Driver for HiSilicon Kirin SoC Xiaowei Song
[not found] ` <20170619102349.50652-3-songxiaowei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2017-06-26 14:01 ` Guodong Xu
2017-06-19 10:23 ` [PATCH v11 3/3] ARM4: defconfig: Enable Kirin PCIe Xiaowei Song
2017-07-02 23:36 ` [PATCH v11 0/3]add PCIe driver for " Bjorn Helgaas
[not found] ` <20170702233657.GA13507-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2017-07-03 10:47 ` Will Deacon
[not found] ` <20170703104727.GB1573-5wv7dgnIgG8@public.gmane.org>
2017-07-03 12:55 ` Bjorn Helgaas
2017-07-03 13:04 ` Guodong Xu
2017-07-03 13:32 ` Wei Xu
[not found] ` <595A4768.20404-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2017-07-04 2:03 ` Guodong Xu
2017-08-15 13:28 ` Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5947AB23.20402@hisilicon.com \
--to=xuwei5-c8/m+/jpzteamjb+lgu22q@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=songxiaowei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=suzhuangluan-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).