Re: [RFC PATCH 2/3] dt-bindings: PCI: rockchip: Add support for pcie wake irq

[jeffy <jeffy.chen@rock-chips.com>]

Hi Shawn,

On 08/16/2017 04:35 PM, Shawn Lin wrote:
> Hi Jeffy
>
> On 2017/8/16 15:52, Jeffy Chen wrote:
>> Add an optional interrupt for PCIE_WAKE pin.
>>
>> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
>> ---
>>
>>   Documentation/devicetree/bindings/pci/rockchip-pcie.txt | 11
>> +++++++----
>>   1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> index 1453a734c2f5..6ef9903567db 100644
>> --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
>> @@ -22,10 +22,13 @@ Required properties:
>>   - phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
>>   - phy-names:  MUST be "pcie-phy".
>>   - interrupts: Three interrupt entries must be specified.
>> -- interrupt-names: Must include the following names
>> -    - "sys"
>> -    - "legacy"
>> -    - "client"
>> +- interrupt-names: Include the following names
>> +    Required:
>> +        - "sys"
>> +        - "legacy"
>> +        - "client"
>> +    Optional:
>> +        - "wake"
>
> It would be better to introduce interrupts-extended and show a example
> here. :)
ok, will add it in next version
>
>>   - resets: Must contain seven entries for each entry in reset-names.
>>          See ../reset/reset.txt for details.
>>   - reset-names: Must include the following names
>>
>
>
>