Re: [PATCH 4/5] ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151

[Pierre Yves MORDRET <pierre-yves.mordret@foss.st.com>]

Hello

Looks good to me

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>

Thx
Regards


On 2/5/21 9:51 AM, Alain Volmat wrote:
> Enable the analog filter for all I2C nodes of the stm32mp151.
> 
> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> ---
>  arch/arm/boot/dts/stm32mp151.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index 3c75abacb374..558fc8fb38b6 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -493,6 +493,7 @@
>  			#size-cells = <0>;
>  			st,syscfg-fmp = <&syscfg 0x4 0x1>;
>  			wakeup-source;
> +			i2c-analog-filter;
>  			status = "disabled";
>  		};
>  
> @@ -508,6 +509,7 @@
>  			#size-cells = <0>;
>  			st,syscfg-fmp = <&syscfg 0x4 0x2>;
>  			wakeup-source;
> +			i2c-analog-filter;
>  			status = "disabled";
>  		};
>  
> @@ -523,6 +525,7 @@
>  			#size-cells = <0>;
>  			st,syscfg-fmp = <&syscfg 0x4 0x4>;
>  			wakeup-source;
> +			i2c-analog-filter;
>  			status = "disabled";
>  		};
>  
> @@ -538,6 +541,7 @@
>  			#size-cells = <0>;
>  			st,syscfg-fmp = <&syscfg 0x4 0x10>;
>  			wakeup-source;
> +			i2c-analog-filter;
>  			status = "disabled";
>  		};
>  
> @@ -1533,6 +1537,7 @@
>  			#size-cells = <0>;
>  			st,syscfg-fmp = <&syscfg 0x4 0x8>;
>  			wakeup-source;
> +			i2c-analog-filter;
>  			status = "disabled";
>  		};
>  
> @@ -1570,6 +1575,7 @@
>  			#size-cells = <0>;
>  			st,syscfg-fmp = <&syscfg 0x4 0x20>;
>  			wakeup-source;
> +			i2c-analog-filter;
>  			status = "disabled";
>  		};
>  
> 

-- 
--
~ Py MORDRET
--