* [PATCH 1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
2018-12-05 15:14 [PATCH 0/3] usb: dwc3: Add support for AM654 USB Roger Quadros
@ 2018-12-05 15:14 ` Roger Quadros
2018-12-05 15:14 ` [PATCH 2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support Roger Quadros
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Roger Quadros @ 2018-12-05 15:14 UTC (permalink / raw)
To: balbi
Cc: tony, robh+dt, nsekhar, t-kristo, vigneshr, linux-omap,
linux-kernel, devicetree, linux-usb, rogerq
On v3.10a in dual-role mode, if port is in device mode
and gadget driver isn't loaded, the OTG event interrupts don't
come through.
It seems that if the core is configured to be OTG2.0 only,
then we can't leave the DCFG.DEVSPD at Super-speed (default)
if we expect OTG to work properly. It must be set to High-speed.
Fix this issue by configuring DCFG.DEVSPD to the supported
maximum speed at gadget init. Device tree still needs to provide
correct supported maximum speed for this to work.
This issue wasn't present on v2.40a but is seen on v3.10a.
It doesn't cause any side effects on v2.40a.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 679c12e..79120c0 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3240,6 +3240,8 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err4;
}
+ dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+
return 0;
err4:
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
2018-12-05 15:14 [PATCH 0/3] usb: dwc3: Add support for AM654 USB Roger Quadros
2018-12-05 15:14 ` [PATCH 1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded Roger Quadros
@ 2018-12-05 15:14 ` Roger Quadros
2018-12-05 15:14 ` [PATCH 3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3 Roger Quadros
2018-12-05 15:18 ` [PATCH 0/3] usb: dwc3: Add support for AM654 USB Roger Quadros
3 siblings, 0 replies; 6+ messages in thread
From: Roger Quadros @ 2018-12-05 15:14 UTC (permalink / raw)
To: balbi
Cc: tony, robh+dt, nsekhar, t-kristo, vigneshr, linux-omap,
linux-kernel, devicetree, linux-usb, rogerq
The AM654 SoC from TI contains a DWC3 controller. Add
support for it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index f96e09f..fa29ff8 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -3,7 +3,7 @@ TI Keystone Soc USB Controller
DWC3 GLUE
Required properties:
- - compatible: should be "ti,keystone-dwc3".
+ - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3".
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
with 'reg' property.
- reg : Address and length of the register set for the USB subsystem on
@@ -21,7 +21,7 @@ SoCs only:
- clock-names: Must be "usb".
-The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+The following are mandatory properties for 66AK2G and AM654:
- power-domains: Should contain a phandle to a PM domain provider node
and an args specifier containing the USB device id
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3
2018-12-05 15:14 [PATCH 0/3] usb: dwc3: Add support for AM654 USB Roger Quadros
2018-12-05 15:14 ` [PATCH 1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded Roger Quadros
2018-12-05 15:14 ` [PATCH 2/3] dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support Roger Quadros
@ 2018-12-05 15:14 ` Roger Quadros
2018-12-05 15:18 ` [PATCH 0/3] usb: dwc3: Add support for AM654 USB Roger Quadros
3 siblings, 0 replies; 6+ messages in thread
From: Roger Quadros @ 2018-12-05 15:14 UTC (permalink / raw)
To: balbi
Cc: tony, robh+dt, nsekhar, t-kristo, vigneshr, linux-omap,
linux-kernel, devicetree, linux-usb, rogerq
The AM654 SoC contains a DWC3 controller with TI specific
wrapper. Add support for that.
Unlike the Keystone 2 case, for AM654 We don't need to
process any IRQs for basic USB operation.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/dwc3/Kconfig | 6 +++---
drivers/usb/dwc3/dwc3-keystone.c | 11 ++++++++++-
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 1a0404f..a83a84f 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -86,11 +86,11 @@ config USB_DWC3_HAPS
platform, please say 'Y' or 'M' here.
config USB_DWC3_KEYSTONE
- tristate "Texas Instruments Keystone2 Platforms"
- depends on ARCH_KEYSTONE || COMPILE_TEST
+ tristate "Texas Instruments Keystone2/3 Platforms"
+ depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
default USB_DWC3
help
- Support of USB2/3 functionality in TI Keystone2 platforms.
+ Support of USB2/3 functionality in TI Keystone2/3 platforms.
Say 'Y' or 'M' here if you have one such device
config USB_DWC3_OF_SIMPLE
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 193a9a8..cbee5fb 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -106,6 +106,10 @@ static int kdwc3_probe(struct platform_device *pdev)
goto err_irq;
}
+ /* IRQ processing not required currently for AM65 */
+ if (of_device_is_compatible(node, "ti,am654-dwc3"))
+ goto skip_irq;
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "missing irq\n");
@@ -123,6 +127,7 @@ static int kdwc3_probe(struct platform_device *pdev)
kdwc3_enable_irqs(kdwc);
+skip_irq:
error = of_platform_populate(node, NULL, NULL, dev);
if (error) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
@@ -152,8 +157,11 @@ static int kdwc3_remove_core(struct device *dev, void *c)
static int kdwc3_remove(struct platform_device *pdev)
{
struct dwc3_keystone *kdwc = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+
+ if (!of_device_is_compatible(node, "ti,am654-dwc3"))
+ kdwc3_disable_irqs(kdwc);
- kdwc3_disable_irqs(kdwc);
device_for_each_child(&pdev->dev, NULL, kdwc3_remove_core);
pm_runtime_put_sync(kdwc->dev);
pm_runtime_disable(kdwc->dev);
@@ -165,6 +173,7 @@ static int kdwc3_remove(struct platform_device *pdev)
static const struct of_device_id kdwc3_of_match[] = {
{ .compatible = "ti,keystone-dwc3", },
+ { .compatible = "ti,am654-dwc3" },
{},
};
MODULE_DEVICE_TABLE(of, kdwc3_of_match);
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 0/3] usb: dwc3: Add support for AM654 USB
2018-12-05 15:14 [PATCH 0/3] usb: dwc3: Add support for AM654 USB Roger Quadros
` (2 preceding siblings ...)
2018-12-05 15:14 ` [PATCH 3/3] usb: dwc3: keystone: Add support for ti,am654-dwc3 Roger Quadros
@ 2018-12-05 15:18 ` Roger Quadros
3 siblings, 0 replies; 6+ messages in thread
From: Roger Quadros @ 2018-12-05 15:18 UTC (permalink / raw)
Cc: tony, robh+dt, nsekhar, t-kristo, vigneshr, linux-omap,
linux-kernel, devicetree, linux-usb
Misspelled Felipe's ID. Will resend this series.
On 05/12/18 17:14, Roger Quadros wrote:
> Hi Felipe,
>
> TI's AM654 USB SoC has 2 instances of the DWC3 controller.
> This series adds AM654 USB wrapper support to the keystone-usb driver.
>
> cheers,
> -roger
>
> Roger Quadros (3):
> usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
> dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
> usb: dwc3: keystone: Add support for ti,am654-dwc3
>
> Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++--
> drivers/usb/dwc3/Kconfig | 6 +++---
> drivers/usb/dwc3/dwc3-keystone.c | 11 ++++++++++-
> drivers/usb/dwc3/gadget.c | 2 ++
> 4 files changed, 17 insertions(+), 6 deletions(-)
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 6+ messages in thread