Re: [PATCH] ARM: dts: imx7d-pico: Add LCD support

[Joris Offouga <offougajoris@gmail.com>]

Hi Marco,

Le 25/10/2019 à 20:45, Marco Felsch a écrit :
> Hi Joris,
>
> On 19-10-25 10:22, Joris Offouga wrote:
>> Add support for the VXT VL050-8048NT-C01 panel connected through
>> the 24 bit parallel LCDIF interface.
>>
>> Signed-off-by: Joris Offouga <offougajoris@gmail.com>
>> Signed-off-by: Fabio Estevam <festevam@gmail.com>
>> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
>> ---
>>   arch/arm/boot/dts/imx7d-pico.dtsi | 84 +++++++++++++++++++++++++++++++
>>   1 file changed, 84 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
>> index 6f50ebf31a0a..9042b1e6f1db 100644
>> --- a/arch/arm/boot/dts/imx7d-pico.dtsi
>> +++ b/arch/arm/boot/dts/imx7d-pico.dtsi
>> @@ -69,6 +69,37 @@
>>   		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
>>   		clock-names = "ext_clock";
>>   	};
>> +
>> +	backlight: backlight {
>> +		compatible = "pwm-backlight";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_backlight>;
>> +		pwms = <&pwm4 0 50000 0>;
>                                        ^
>       If not inverted please drop the this flag.
> Also you need to add
>
> &pwm4 {
> 	status = "okay";
> };
This  node is already provide but i agree with you i move pinctrl in 
pwm4 node and rename the muxing
>
> And so you can do the pwm pinctrl within that node, see below.
>
>> +		brightness-levels = <0 36 72 108 144 180 216 255>;
>> +		default-brightness-level = <6>;
>> +		status = "okay";
> status can be dropped too.
>
>> +	};
>> +
>> +	reg_lcd_3v3: regulator-lcd-3v3 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "lcd-3v3";
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> Missing the muxing?
No this pin is already drive
>
>> +		enable-active-high;
>> +	};
>> +
>> +	panel {
>> +		compatible = "vxt,vl050-8048nt-c01";
>> +		backlight = <&backlight>;
>> +		power-supply = <&reg_lcd_3v3>;
>> +
>> +		port {
>> +			panel_in: endpoint {
>> +				remote-endpoint = <&display_out>;
>> +			};
>> +		};
>> +	};
> Please sort the nodes alphabetical.

okay thanks for your review

otherwise Fabio made me notice that I should leave his From however with 
the changes made I should put mine?

Best regards,

Joris

>
>>   };
>>   
>>   &clks {
>> @@ -230,6 +261,18 @@
>>   	};
>>   };
>>   
>> +&lcdif {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&pinctrl_lcdif>;
>> +	status = "okay";
>> +
>> +	port {
>> +		display_out: endpoint {
>> +			remote-endpoint = <&panel_in>;
>> +		};
>> +	};
>> +};
>> +
>>   &sai1 {
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&pinctrl_sai1>;
>> @@ -349,6 +392,13 @@
>>   };
>>   
>>   &iomuxc {
>> +
>> +	pinctrl_backlight: backlight {
>                                      ^
>                          please add 'grp'
>> +		fsl,pins = <
>> +			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x0
>> +		>;
>> +	};
> IMHO the muxing is part of the pwm4 node. So rename it to
> 'pinctrl_pwm4: pwm4grp'.
>
> Regards,
>    Marco
>
>> +
>>   	pinctrl_ecspi3: ecspi3grp {
>>   		fsl,pins = <
>>   			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
>> @@ -413,6 +463,40 @@
>>   		>;
>>   	};
>>   
>> +	pinctrl_lcdif: lcdifgrp {
>> +		fsl,pins = <
>> +			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
>> +			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
>> +			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
>> +			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
>> +			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
>> +			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
>> +			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
>> +			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
>> +			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
>> +			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
>> +			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
>> +			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
>> +			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
>> +			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
>> +			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
>> +			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
>> +			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
>> +			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
>> +			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
>> +			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
>> +			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
>> +			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
>> +			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
>> +			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
>> +			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
>> +			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
>> +			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
>> +			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
>> +			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
>> +		>;
>> +	};
>> +
>>   	pinctrl_pwm1: pwm1 {
>>   		fsl,pins = <
>>   			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
>> -- 
>> 2.17.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>