Re: [PATCH 07/13] arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level

[Dhruva Gole <d-gole@ti.com>]

On 03/08/23 02:23, Andrew Davis wrote:
> OSPI nodes defined in the top-level AM64 SoC dtsi files are incomplete
> and may not be functional unless they are extended with pinmux and
> device information.
> 
> As the attached OSPI device is only known about at the board integration
> level, these nodes should only be enabled when provided with this
> information.
> 
> Disable the OSPI nodes in the dtsi files and only enable the ones that
> are actually pinned out on a given board.
> 
> Signed-off-by: Andrew Davis <afd@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am64-main.dtsi        | 1 +
>   arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 1 +
>   arch/arm64/boot/dts/ti/k3-am642-evm.dts         | 1 +
>   arch/arm64/boot/dts/ti/k3-am642-sk.dts          | 1 +
>   4 files changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index d3dd8c426dada..49f910e4b03fc 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -802,6 +802,7 @@ ospi0: spi@fc40000 {
>   			assigned-clock-parents = <&k3_clks 75 7>;
>   			assigned-clock-rates = <166666666>;
>   			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
> +			status = "disabled";
>   		};
>   	};
>   
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> index 5606d775153d4..1c2c8f0daca9f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
> @@ -181,6 +181,7 @@ i2c_som_rtc: rtc@52 {
>   };
>   
>   &ospi0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>   
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index d84e7ee160328..b4a1f73d4fb17 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -520,6 +520,7 @@ &tscadc0 {
>   };
>   
>   &ospi0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>   
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index 963d796a3a970..af06ccd466802 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -518,6 +518,7 @@ &tscadc0 {
>   };
>   
>   &ospi0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>   

Reviewed-by: Dhruva Gole <d-gole@ti.com>


-- 
Thanks and Regards,
Dhruva Gole