* [PATCH v9 0/7] Provide support for Trigger Generation Unit
@ 2025-12-19 6:58 Songwei Chai
2025-12-19 6:58 ` [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace Songwei Chai
` (7 more replies)
0 siblings, 8 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:58 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
We propose creating a new qcom directory under drivers/hwtracing
to host this TGU driver, as well as additional Qualcomm-specific
hwtracing drivers that we plan to submit in the coming months.
This structure will help organize vendor-specific implementations
and facilitate future development and maintenance.
Feedback from the community on this proposal is highly appreciated.
- Why we are proposing this:
TGU has the ability to monitor signal conditions and trigger debug-related
actions, serving as a programmable hardware component that enhances system
trace and debug capabilities. Placing it under drivers/hwtracing aligns with
its function as a trace generation utility.
We previously attempted to push this driver to drivers/hwtracing/coresight,
but did not receive support from the maintainers of the CoreSight subsystem.
The reason provided was: “This component is primarily a part of the
Qualcomm proprietary QPMDA subsystem, and is capable of operating
independently from the CoreSight hardware trace generation system.”
Chat history : https://lore.kernel.org/all/CAJ9a7ViKxHThyZfFFDV_FkNRimk4uo1NrMtQ-kcaj1qO4ZcGnA@mail.gmail.com/
Given this, we have been considering whether it would be appropriate
to create a dedicated drivers/hwtracing/qcom directory for
Qualcomm-related hwtracing drivers. This would follow the precedent set
by Intel, which maintains its own directory at drivers/hwtracing/intel_th.
We believe this structure would significantly facilitate
future submissions of related Qualcomm drivers.
- Maintenance of drivers/hwtracing/qcom:
Bjorn, who maintains linux-arm-msm, will be the maintainer of this
directory — we’ve discussed this with him and he’s aware that his task
list may grow accordingly. Additionally, Qualcomm engineers familiar with
the debug hardware — such as [Tingwei Zhang, Jinlong Mao, Songwei Chai],
will be available to review incoming patches and support ongoing
development.
- Detail for TGU:
This component can be utilized to sense a plurality of signals and
create a trigger into the CTI or generate interrupts to processors
once the input signal meets the conditions. We can treat the TGU’s
workflow as a flowsheet, it has some “steps” regions for customization.
In each step region, we can set the signals that we want with priority
in priority_group, set the conditions in each step via condition_decode,
and set the resultant action by condition_select. Meanwhile,
some TGUs (not all) also provide timer/counter functionality.
Based on the characteristics described above, we consider the TGU as a
helper in the CoreSight subsystem. Its master device is the TPDM, which
can transmit signals from other subsystems, and we reuse the existing
ports mechanism to link the TPDM to the connected TGU.
Here is a detailed example to explain how to use the TGU:
In this example, the TGU is configured to use 2 conditions, 2 steps, and
the timer. The goal is to look for one of two patterns which are generated
from TPDM, giving priority to one, and then generate a trigger once the
timer reaches a certain value. In other words, two conditions are used
for the first step to look for the two patterns, where the one with the
highest priority is used in the first condition. Then, in the second step,
the timer is enabled and set to be compared to the given value at each
clock cycle. These steps are better shown below.
|-----------------|
| |
| TPDM |
| |
|-----------------|
|
|
--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ------
| | |
| | |--------------------| |
| |---- ---> | | Go to next steps | |
| | | |--- ---> | Enable timer | |
| | v | | | |
| | |-----------------| | |--------------------| |
| | | | Yes | | |
| | | inputs==0xB | ----->| | <-------- |
| | | | | | No | |
| No | |-----------------| | v | |
| | | | |-----------------| | |
| | | | | | | |
| | | | | timer>=3 |-- |
| | v | | | |
| | |-----------------| | |-----------------| |
| | | | Yes | | |
| |--- | inputs==0xA | ----->| | Yes |
| | | | |
| |-----------------| v |
| |-----------------| |
| | | |
| | Trigger | |
| | | |
| |-----------------| |
| TGU | |
|--- --- --- --- --- --- --- --- --- --- --- --- --- --- |--- --- -- |
|
v
|-----------------|
|The controllers |
|which will use |
|triggers further |
|-----------------|
steps:
1. Reset TGU /*it will disable tgu and reset dataset*/
- echo 1 > /sys/bus/amba/devices/<tgu-name>/reset_tgu
2. Set the pattern match for priority0 to 0xA = 0b1010 and for
priority 1 to 0xB = 0b1011.
- echo 0x11113232 > /sys/bus/amba/devices/<tgu-name>/step0_priority0/reg0
- echo 0x11113233 > /sys/bus/amba/devices/<tgu-name>/step0_priority1/reg0
Note:
Bit distribution diagram for each priority register
|-------------------------------------------------------------------|
| Bits | Field Nam | Description |
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 29:28 | SEL_BIT7_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 25:24 | SEL_BIT6_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 21:20 | SEL_BIT5_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 17:16 | SEL_BIT4_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 13:12 | SEL_BIT3_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 9:8 | SEL_BIT2_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 5:4 | SEL_BIT1_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
| | | 00 = bypass for OR output |
| 1:0 | SEL_BIT0_TYPE2 | 01 = bypass for AND output |
| | | 10 = sense input '0' is true|
| | | 11 = sense input '1' is true|
|-------------------------------------------------------------------|
These bits are used to identify the signals we want to sense, with
a maximum signal number of 140. For example, to sense the signal
0xA (binary 1010), we set the value of bits 0 to 13 to 3232, which
represents 1010. The remaining bits are set to 1, as we want to use
AND gate to summarize all the signals we want to sense here. For
rising or falling edge detection of any input to the priority, set
the remaining bits to 0 to use an OR gate.
3. look for the pattern for priority_i i=0,1.
- echo 0x3 > /sys/bus/amba/devices/<tgu-name>/step0_condition_decode/reg0
- echo 0x30 > /sys/bus/amba/devices/<tgu-name>/step0_condition_decode/reg1
|-------------------------------------------------------------------------------|
| Bits | Field Nam | Description |
|-------------------------------------------------------------------------------|
| | |For each decoded condition, this |
| 24 | NOT |inverts the output. If the condition |
| | |decodes to true, and the NOT field |
| | |is '1', then the output is NOT true. |
|-------------------------------------------------------------------------------|
| | |When '1' the output from the associated|
| 21 | BC0_COMP_ACTIVE |comparator will be actively included in|
| | |the decoding of this particular |
| | |condition. |
|-------------------------------------------------------------------------------|
| | |When '1' the output from the associated|
| | |comparator will need to be 1 to affect |
| 20 | BC0_COMP_HIGH |the decoding of this condition. |
| | |Conversely, a '0' here requires a '0' |
| | |from the comparator |
|-------------------------------------------------------------------------------|
| | |When '1' the output from the associated|
| 17 | |comparator will be actively included in|
| | TC0_COMP_ACTIVE |the decoding of this particular |
| | |condition. |
|-------------------------------------------------------------------------------|
| | |When '1' the output from the associated|
| | |comparator will need to be 1 to affect |
| 16 | TC0_COMP_HIGH |the decoding of this particular |
| | |condition.Conversely, a 0 here |
| | |requires a '0' from the comparator |
|-------------------------------------------------------------------------------|
| | |When '1' the output from Priority_n |
| | |OR logic will be actively |
| 4n+3 | Priority_n_OR_ACTIVE|included in the decoding of |
| | (n=0,1,2,3) |this particular condition. |
| | | |
|-------------------------------------------------------------------------------|
| | |When '1' the output from Priority_n |
| | |will need to be '1' to affect the |
| 4n+2 | Priority_n_OR_HIGH |decoding of this particular |
| | (n=0,1,2,3) |condition. Conversely, a '0' here |
| | |requires a '0' from Priority_n OR logic|
|-------------------------------------------------------------------------------|
| | |When '1' the output from Priority_n |
| | |AND logic will be actively |
| 4n+1 |Priority_n_AND_ACTIVE|included in the decoding of this |
| | (n=0,1,2,3) |particular condition. |
| | | |
|-------------------------------------------------------------------------------|
| | |When '1' the output from Priority_n |
| | |AND logic will need to be '1' to |
| 4n | Priority_n_AND_HIGH |affect the decoding of this |
| | (n=0,1,2,3) |particular condition. Conversely, |
| | |a '0' here requires a '0' from |
| | |Priority_n AND logic. |
|-------------------------------------------------------------------------------|
Since we use `priority_0` and `priority_1` with an AND output in step 2, we set `0x3`
and `0x30` here to activate them.
4. Set NEXT_STEP = 1 and TC0_ENABLE = 1 so that when the conditions
are met then the next step will be step 1 and the timer will be enabled.
- echo 0x20008 > /sys/bus/amba/devices/<tgu-name>/step0_condition_select/reg0
- echo 0x20008 > /sys/bus/amba/devices/<tgu-name>/step0_condition_select/reg1
|-----------------------------------------------------------------------------|
| Bits | Field Nam | Description |
|-----------------------------------------------------------------------------|
| | |This field defines the next step the |
| 18:17 | NEXT_STEP |TGU will 'goto' for the associated |
| | |Condition and Step. |
|-----------------------------------------------------------------------------|
| | |For each possible output trigger |
| 13 | TRIGGER |available, set a '1' if you want |
| | |the trigger to go active for the |
| | |associated condition and Step. |
|-----------------------------------------------------------------------------|
| | |This will cause BC0 to increment if the|
| 9 | BC0_INC |associated Condition is decoded for |
| | |this step. |
|-----------------------------------------------------------------------------|
| | |This will cause BC0 to decrement if the|
| 8 | BC0_DEC |associated Condition is decoded for |
| | |this step. |
|-----------------------------------------------------------------------------|
| | |This will clear BC0 count value to 0 if|
| 7 | BC0_CLEAR |the associated Condition is decoded |
| | |for this step. |
|-----------------------------------------------------------------------------|
| | |This will cause TC0 to increment until |
| 3 | TC0_ENABLE |paused or cleared if the associated |
| | |Condition is decoded for this step. |
|-----------------------------------------------------------------------------|
| | |This will cause TC0 to pause until |
| 2 | TC0_PAUSE |enabled if the associated Condition |
| | |is decoded for this step. |
|-----------------------------------------------------------------------------|
| | |This will clear TC0 count value to 0 |
| 1 | TC0_CLEAR |if the associated Condition is |
| | |decoded for this step. |
|-----------------------------------------------------------------------------|
| | |This will set the done signal to the |
| 0 | DONE |TGU FSM if the associated Condition |
| | |is decoded for this step. |
|-----------------------------------------------------------------------------|
Based on the distribution diagram, we set `0x20008` for `priority0` and `priority1` to
achieve "jump to step 1 and enable TC0" once the signal is sensed.
5. activate the timer comparison for this step.
- echo 0x30000 > /sys/bus/amba/devices/<tgu-name>/step1_condition_decode/reg0
|-------------------------------------------------------------------------------|
| | |When '1' the output from the associated|
| 17 | |comparator will be actively included in|
| | TC0_COMP_ACTIVE |the decoding of this particular |
| | |condition. |
|-------------------------------------------------------------------------------|
| | |When '1' the output from the associated|
| | |comparator will need to be 1 to affect |
| 16 | TC0_COMP_HIGH |the decoding of this particular |
| | |condition.Conversely, a 0 here |
| | |requires a '0' from the comparator |
|-------------------------------------------------------------------------------|
Accroding to the decode distribution diagram , we give 0x30000 here to set 16th&17th bit
to enable timer comparison.
6. Set the NEXT_STEP = 0 and TC0_PAUSE = 1 and TC0_CLEAR = 1 once the timer
has reached the given value.
- echo 0x6 > /sys/bus/amba/devices/<tgu-name>/step1_condition_select/reg0
7. Enable Trigger 0 for TGU when the condition 0 is met in step1,
i.e. when the timer reaches 3.
- echo 0x2000 > /sys/bus/amba/devices/<tgu-name>/step1_condition_select/default
Note:
1. 'default' register allows for establishing the resultant action for
the default condition
2. Trigger:For each possible output trigger available from
the Design document, there are three triggers: interrupts, CTI,
and Cross-TGU mapping.All three triggers can occur, but
the choice of which trigger to use depends on the user's
needs.
8. Compare the timer to 3 in step 1.
- echo 0x3 > /sys/bus/amba/devices/<tgu-name>/step1_timer/reg0
9. enale tgu
- echo 1 > /sys/bus/amba/devices/<tgu-name>/enable_tgu
---
Link to V8: https://lore.kernel.org/all/20251203090055.2432719-1-songwei.chai@oss.qualcomm.com/
Changes in V9:
- Decoupled the tgu driver from coresight header file and registered it as an amba device.
- Retained Rob's reviewed-by tag on patch1/7 since the file remains unchanged.
- Updated the sysfs node path in the Documentation directory.
---
Link to V7: https://lore.kernel.org/all/20251104064043.88972-1-songwei.chai@oss.qualcomm.com/
Changes in V8:
- Add "select" section in bindings.
- Update publish date in "sysfs-bus-coresight-devices-tgu".
---
Link to V6: https://lore.kernel.org/all/20250709104114.22240-1-songchai@qti.qualcomm.com/
Changes in V7:
- Move the TGU code location from 'drivers/hwtracing/coresight/' to 'drivers/hwtracing/qcom/'.
- Rename the spinlock used in the code from 'spinlock' to 'lock'.
- Perform the 'calculate_array_location' separately, instead of doing it within the function.
- Update the sender email address.
---
Link to V5: https://lore.kernel.org/all/20250529081949.26493-1-quic_songchai@quicinc.com/
Changes in V6:
- Replace spinlock with guard(spinlock) in tgu_enable.
- Remove redundant blank line.
- Update publish date and contact member's name in "sysfs-bus-coresight-devices-tgu".
---
Link to V4: https://patchwork.kernel.org/project/linux-arm-msm/cover/20250423101054.954066-1-quic_songchai@quicinc.com/
Changes in V5:
- Update publish date and kernel_version in "sysfs-bus-coresight-devices-tgu"
---
Link to V3: https://lore.kernel.org/all/20250227092640.2666894-1-quic_songchai@quicinc.com/
Changes in V4:
- Add changlog in coverletter.
- Correct 'year' in Copyright in patch1.
- Correct port mechansim description in patch1.
- Remove 'tgu-steps','tgu-regs','tgu-conditions','tgu-timer-counters' from dt-binding
and set them through reading DEVID register as per Mike's suggestion.
- Modify tgu_disable func to make it have single return point in patch2 as per
Mike's suggestion.
- Use sysfs_emit in enable_tgu_show func in ptach2.
- Remove redundant judgement in enable_tgu_store in patch2.
- Correct typo in description in patch3.
- Set default ret as SYSFS_GROUP_INVISIBLE, and returnret at end in pacth3 as
per Mike's suggestion.
- Remove tgu_dataset_ro definition in patch3
- Use #define constants with explanations of what they are rather than
arbitrary magic numbers in patch3 and patch4.
- Check -EINVAL before using 'calculate_array_location()' in array in patch4.
- Add 'default' in 'tgu_dataset_show''s switch part in patch4.
- Document the value needed to initiate the reset in pacth7.
- Check "value" in 'reset_tgu_store' and bail out with an error code if 0 in patch7.
- Remove dev_dbg in 'reset_tgu_store' in patch7.
---
Link to V2: https://lore.kernel.org/all/20241010073917.16023-1-quic_songchai@quicinc.com/
Changes in V3:
- Correct typo and format in dt-binding in patch1
- Rebase to the latest kernel version
---
Link to V1: https://lore.kernel.org/all/20240830092311.14400-1-quic_songchai@quicinc.com/
Changes in V2:
- Use real name instead of login name,
- Correct typo and format in dt-binding and code.
- Bring order in tgu_prob(declarations with and without assignments) as per
Krzysztof's suggestion.
- Add module device table in patch2.
- Set const for tgu_common_grp and tgu_ids in patch2.
- Initialize 'data' in tgu_ids to fix the warning in pacth2.
---
Songwei Chai (7):
dt-bindings: arm: Add support for Qualcomm TGU trace
qcom-tgu: Add TGU driver
qcom-tgu: Add signal priority support
qcom-tgu: Add TGU decode support
qcom-tgu: Add support to configure next action
qcom-tgu: Add timer/counter functionality for TGU
qcom-tgu: Add reset node to initialize
.../ABI/testing/sysfs-bus-amba-devices-tgu | 51 ++
.../devicetree/bindings/arm/qcom,tgu.yaml | 92 +++
drivers/Makefile | 1 +
drivers/hwtracing/Kconfig | 2 +
drivers/hwtracing/qcom/Kconfig | 18 +
drivers/hwtracing/qcom/Makefile | 3 +
drivers/hwtracing/qcom/tgu.c | 702 ++++++++++++++++++
drivers/hwtracing/qcom/tgu.h | 272 +++++++
8 files changed, 1141 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
create mode 100644 Documentation/devicetree/bindings/arm/qcom,tgu.yaml
create mode 100644 drivers/hwtracing/qcom/Kconfig
create mode 100644 drivers/hwtracing/qcom/Makefile
create mode 100644 drivers/hwtracing/qcom/tgu.c
create mode 100644 drivers/hwtracing/qcom/tgu.h
--
2.34.1
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
@ 2025-12-19 6:58 ` Songwei Chai
2025-12-25 2:57 ` Jie Gan
2025-12-25 6:28 ` Jie Gan
2025-12-19 6:58 ` [PATCH v9 2/7] qcom-tgu: Add TGU driver Songwei Chai
` (6 subsequent siblings)
7 siblings, 2 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:58 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh, Rob Herring
The Trigger Generation Unit (TGU) is designed to detect patterns or
sequences within a specific region of the System on Chip (SoC). Once
configured and activated, it monitors sense inputs and can detect a
pre-programmed state or sequence across clock cycles, subsequently
producing a trigger.
TGU configuration space
offset table
x-------------------------x
| |
| |
| | Step configuration
| | space layout
| coresight management | x-------------x
| registers | |---> | |
| | | | reserve |
| | | | |
|-------------------------| | |-------------|
| | | | priority[3] |
| step[7] |<-- | |-------------|
|-------------------------| | | | priority[2] |
| | | | |-------------|
| ... | |Steps region | | priority[1] |
| | | | |-------------|
|-------------------------| | | | priority[0] |
| |<-- | |-------------|
| step[0] |--------------------> | |
|-------------------------| | condition |
| | | |
| control and status | x-------------x
| space | | |
x-------------------------x |Timer/Counter|
| |
x-------------x
TGU Configuration in Hardware
The TGU provides a step region for user configuration, similar
to a flow chart. Each step region consists of three register clusters:
1.Priority Region: Sets the required signals with priority.
2.Condition Region: Defines specific requirements (e.g., signal A
reaches three times) and the subsequent action once the requirement is
met.
3.Timer/Counter (Optional): Provides timing or counting functionality.
Add a new tgu.yaml file to describe the bindings required to
define the TGU in the device trees.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../devicetree/bindings/arm/qcom,tgu.yaml | 92 +++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/qcom,tgu.yaml
diff --git a/Documentation/devicetree/bindings/arm/qcom,tgu.yaml b/Documentation/devicetree/bindings/arm/qcom,tgu.yaml
new file mode 100644
index 000000000000..5b6a58ebe691
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,tgu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,tgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trigger Generation Unit - TGU
+
+description: |
+ The Trigger Generation Unit (TGU) is a Data Engine which can be utilized
+ to sense a plurality of signals and create a trigger into the CTI or
+ generate interrupts to processors. The TGU is like the trigger circuit
+ of a Logic Analyzer. The corresponding trigger logic can be realized by
+ configuring the conditions for each step after sensing the signal.
+ Once setup and enabled, it will observe sense inputs and based upon
+ the activity of those inputs, even over clock cycles, may detect a
+ preprogrammed state/sequence and then produce a trigger or interrupt.
+
+ The primary use case of the TGU is to detect patterns or sequences on a
+ given set of signals within some region to identify the issue in time
+ once there is abnormal behavior in the subsystem.
+
+maintainers:
+ - Mao Jinlong <jinlong.mao@oss.qualcomm.com>
+ - Songwei Chai <songwei.chai@oss.qualcomm.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,tgu
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: qcom,tgu
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: apb_pclk
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description:
+ The port mechanism here ensures the relationship between TGU and
+ TPDM, as TPDM is one of the inputs for TGU. It will allow TGU to
+ function as TPDM's helper and enable TGU when the connected
+ TPDM is enabled.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ tgu@10b0e000 {
+ compatible = "qcom,tgu", "arm,primecell";
+ reg = <0x10b0e000 0x1000>;
+
+ clocks = <&aoss_qmp>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ tgu_in_tpdm_swao: endpoint{
+ remote-endpoint = <&tpdm_swao_out_tgu>;
+ };
+ };
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v9 2/7] qcom-tgu: Add TGU driver
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
2025-12-19 6:58 ` [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace Songwei Chai
@ 2025-12-19 6:58 ` Songwei Chai
2025-12-25 2:44 ` Jie Gan
2025-12-19 6:58 ` [PATCH v9 3/7] qcom-tgu: Add signal priority support Songwei Chai
` (5 subsequent siblings)
7 siblings, 1 reply; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:58 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
Add driver to support device TGU (Trigger Generation Unit).
TGU is a Data Engine which can be utilized to sense a plurality of
signals and create a trigger into the CTI or generate interrupts to
processors. Add probe/enable/disable functions for tgu.
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../ABI/testing/sysfs-bus-amba-devices-tgu | 9 +
drivers/Makefile | 1 +
drivers/hwtracing/Kconfig | 2 +
drivers/hwtracing/qcom/Kconfig | 18 ++
drivers/hwtracing/qcom/Makefile | 3 +
drivers/hwtracing/qcom/tgu.c | 178 ++++++++++++++++++
drivers/hwtracing/qcom/tgu.h | 51 +++++
7 files changed, 262 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
create mode 100644 drivers/hwtracing/qcom/Kconfig
create mode 100644 drivers/hwtracing/qcom/Makefile
create mode 100644 drivers/hwtracing/qcom/tgu.c
create mode 100644 drivers/hwtracing/qcom/tgu.h
diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
new file mode 100644
index 000000000000..24dcdf1d70cc
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
@@ -0,0 +1,9 @@
+What: /sys/bus/amba/devices/<tgu-name>/enable_tgu
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (RW) Set/Get the enable/disable status of TGU
+ Accepts only one of the 2 values - 0 or 1.
+ 0 : disable TGU.
+ 1 : enable TGU.
diff --git a/drivers/Makefile b/drivers/Makefile
index ccc05f1eae3e..9608a3debb1f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -177,6 +177,7 @@ obj-$(CONFIG_RAS) += ras/
obj-$(CONFIG_USB4) += thunderbolt/
obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
obj-y += hwtracing/intel_th/
+obj-y += hwtracing/qcom/
obj-$(CONFIG_STM) += hwtracing/stm/
obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/
obj-y += android/
diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
index 911ee977103c..8a640218eed8 100644
--- a/drivers/hwtracing/Kconfig
+++ b/drivers/hwtracing/Kconfig
@@ -7,4 +7,6 @@ source "drivers/hwtracing/intel_th/Kconfig"
source "drivers/hwtracing/ptt/Kconfig"
+source "drivers/hwtracing/qcom/Kconfig"
+
endmenu
diff --git a/drivers/hwtracing/qcom/Kconfig b/drivers/hwtracing/qcom/Kconfig
new file mode 100644
index 000000000000..d6f6d4b0f28e
--- /dev/null
+++ b/drivers/hwtracing/qcom/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# QCOM specific hwtracing drivers
+#
+menu "Qualcomm specific hwtracing drivers"
+
+config QCOM_TGU
+ tristate "QCOM Trigger Generation Unit driver"
+ help
+ This driver provides support for Trigger Generation Unit that is
+ used to detect patterns or sequences on a given set of signals.
+ TGU is used to monitor a particular bus within a given region to
+ detect illegal transaction sequences or slave responses. It is also
+ used to monitor a data stream to detect protocol violations and to
+ provide a trigger point for centering data around a specific event
+ within the trace data buffer.
+
+endmenu
diff --git a/drivers/hwtracing/qcom/Makefile b/drivers/hwtracing/qcom/Makefile
new file mode 100644
index 000000000000..5a0a868c1ea0
--- /dev/null
+++ b/drivers/hwtracing/qcom/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_QCOM_TGU) += tgu.o
diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
new file mode 100644
index 000000000000..dbd1acbd2fa5
--- /dev/null
+++ b/drivers/hwtracing/qcom/tgu.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+
+#include "tgu.h"
+
+static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
+{
+ TGU_UNLOCK(drvdata->base);
+ /* Enable TGU to program the triggers */
+ writel(1, drvdata->base + TGU_CONTROL);
+ TGU_LOCK(drvdata->base);
+}
+
+static int tgu_enable(struct device *dev)
+{
+ struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
+
+ guard(spinlock)(&drvdata->lock);
+ if (drvdata->enable)
+ return -EBUSY;
+
+ tgu_write_all_hw_regs(drvdata);
+ drvdata->enable = true;
+
+ return 0;
+}
+
+static int tgu_disable(struct device *dev)
+{
+ struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
+
+ guard(spinlock)(&drvdata->lock);
+ if (drvdata->enable) {
+ TGU_UNLOCK(drvdata->base);
+ writel(0, drvdata->base + TGU_CONTROL);
+ TGU_LOCK(drvdata->base);
+
+ drvdata->enable = false;
+ }
+ return 0;
+}
+
+static ssize_t enable_tgu_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ bool enabled;
+ struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
+
+ guard(spinlock)(&drvdata->lock);
+ enabled = drvdata->enable;
+
+ return sysfs_emit(buf, "%d\n", enabled);
+}
+
+/* enable_tgu_store - Configure Trace and Gating Unit (TGU) triggers. */
+static ssize_t enable_tgu_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ int ret = 0;
+ unsigned long val;
+
+ ret = kstrtoul(buf, 0, &val);
+ if (ret)
+ return ret;
+
+ if (val) {
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return ret;
+ ret = tgu_enable(dev);
+ if (ret)
+ pm_runtime_put(dev);
+ } else {
+ ret = tgu_disable(dev);
+ pm_runtime_put(dev);
+ }
+
+ if (ret)
+ return ret;
+ return size;
+}
+static DEVICE_ATTR_RW(enable_tgu);
+
+static struct attribute *tgu_common_attrs[] = {
+ &dev_attr_enable_tgu.attr,
+ NULL,
+};
+
+static const struct attribute_group tgu_common_grp = {
+ .attrs = tgu_common_attrs,
+ NULL,
+};
+
+static const struct attribute_group *tgu_attr_groups[] = {
+ &tgu_common_grp,
+ NULL,
+};
+
+static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
+{
+ struct device *dev = &adev->dev;
+ struct tgu_drvdata *drvdata;
+ int ret;
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->dev = &adev->dev;
+ dev_set_drvdata(dev, drvdata);
+
+ drvdata->base = devm_ioremap_resource(dev, &adev->res);
+ if (IS_ERR(drvdata->base))
+ return PTR_ERR(drvdata->base);
+
+ spin_lock_init(&drvdata->lock);
+
+ ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
+ if (ret) {
+ dev_err(dev, "failed to create sysfs groups: %d\n", ret);
+ return ret;
+ }
+
+ drvdata->enable = false;
+
+ pm_runtime_put(&adev->dev);
+ return 0;
+}
+
+static void tgu_remove(struct amba_device *adev)
+{
+ struct device *dev = &adev->dev;
+
+ sysfs_remove_groups(&dev->kobj, tgu_attr_groups);
+
+ tgu_disable(dev);
+ dev_set_drvdata(dev, NULL);
+}
+
+static const struct amba_id tgu_ids[] = {
+ {
+ .id = 0x000f0e00,
+ .mask = 0x000fffff,
+ },
+ { 0, 0, NULL },
+};
+
+MODULE_DEVICE_TABLE(amba, tgu_ids);
+
+static struct amba_driver tgu_driver = {
+ .drv = {
+ .name = "qcom-tgu",
+ .suppress_bind_attrs = true,
+ },
+ .probe = tgu_probe,
+ .remove = tgu_remove,
+ .id_table = tgu_ids,
+};
+
+module_amba_driver(tgu_driver);
+
+MODULE_AUTHOR("Songwei Chai <songwei.chai@oss.qualcomm.com>");
+MODULE_AUTHOR("Jinlong Mao <jinlong.mao@oss.qualcomm.com>");
+MODULE_DESCRIPTION("Qualcomm Trigger Generation Unit driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
new file mode 100644
index 000000000000..abc732f91dfc
--- /dev/null
+++ b/drivers/hwtracing/qcom/tgu.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _QCOM_TGU_H
+#define _QCOM_TGU_H
+
+/* Register addresses */
+#define TGU_CONTROL 0x0000
+#define TGU_LAR 0xfb0
+#define TGU_UNLOCK_OFFSET 0xc5acce55
+
+static inline void TGU_LOCK(void __iomem *addr)
+{
+ do {
+ /* Wait for things to settle */
+ mb();
+ writel_relaxed(0x0, addr + TGU_LAR);
+ } while (0);
+}
+
+static inline void TGU_UNLOCK(void __iomem *addr)
+{
+ do {
+ writel_relaxed(TGU_UNLOCK_OFFSET, addr + TGU_LAR);
+ /* Make sure everyone has seen this */
+ mb();
+ } while (0);
+}
+
+/**
+ * struct tgu_drvdata - Data structure for a TGU (Trigger Generator Unit)
+ * @base: Memory-mapped base address of the TGU device
+ * @dev: Pointer to the associated device structure
+ * @lock: Spinlock for handling concurrent access
+ * @enable: Flag indicating whether the TGU device is enabled
+ *
+ * This structure defines the data associated with a TGU device,
+ * including its base address, device pointers, clock, spinlock for
+ * synchronization, trigger data pointers, maximum limits for various
+ * trigger-related parameters, and enable status.
+ */
+struct tgu_drvdata {
+ void __iomem *base;
+ struct device *dev;
+ spinlock_t lock;
+ bool enable;
+};
+
+#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v9 3/7] qcom-tgu: Add signal priority support
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
2025-12-19 6:58 ` [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace Songwei Chai
2025-12-19 6:58 ` [PATCH v9 2/7] qcom-tgu: Add TGU driver Songwei Chai
@ 2025-12-19 6:58 ` Songwei Chai
2025-12-25 3:20 ` Jie Gan
2025-12-19 6:58 ` [PATCH v9 4/7] qcom-tgu: Add TGU decode support Songwei Chai
` (4 subsequent siblings)
7 siblings, 1 reply; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:58 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
Like circuit of a Logic analyzer, in TGU, the requirement could be
configured in each step and the trigger will be created once the
requirements are met. Add priority functionality here to sort the
signals into different priorities. The signal which is wanted could
be configured in each step's priority node, the larger number means
the higher priority and the signal with higher priority will be sensed
more preferentially.
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../ABI/testing/sysfs-bus-amba-devices-tgu | 7 +
drivers/hwtracing/qcom/tgu.c | 156 ++++++++++++++++++
drivers/hwtracing/qcom/tgu.h | 113 +++++++++++++
3 files changed, 276 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
index 24dcdf1d70cc..d04a01368089 100644
--- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
+++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
@@ -7,3 +7,10 @@ Description:
Accepts only one of the 2 values - 0 or 1.
0 : disable TGU.
1 : enable TGU.
+
+What: /sys/bus/amba/devices/<tgu-name>/step[0:7]_priority[0:3]/reg[0:17]
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (RW) Set/Get the sensed signal with specific step and priority for TGU.
diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
index dbd1acbd2fa5..447d7e68d132 100644
--- a/drivers/hwtracing/qcom/tgu.c
+++ b/drivers/hwtracing/qcom/tgu.c
@@ -14,14 +14,121 @@
#include "tgu.h"
+static int calculate_array_location(struct tgu_drvdata *drvdata,
+ int step_index, int operation_index,
+ int reg_index)
+{
+ return operation_index * (drvdata->max_step) * (drvdata->max_reg) +
+ step_index * (drvdata->max_reg) + reg_index;
+}
+
+static ssize_t tgu_dataset_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int index;
+ struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
+ struct tgu_attribute *tgu_attr =
+ container_of(attr, struct tgu_attribute, attr);
+
+ index = calculate_array_location(drvdata, tgu_attr->step_index,
+ tgu_attr->operation_index,
+ tgu_attr->reg_num);
+
+ return sysfs_emit(buf, "0x%x\n",
+ drvdata->value_table->priority[index]);
+}
+
+static ssize_t tgu_dataset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int index;
+ unsigned long val;
+
+ struct tgu_drvdata *tgu_drvdata = dev_get_drvdata(dev);
+ struct tgu_attribute *tgu_attr =
+ container_of(attr, struct tgu_attribute, attr);
+
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ guard(spinlock)(&tgu_drvdata->lock);
+ index = calculate_array_location(tgu_drvdata, tgu_attr->step_index,
+ tgu_attr->operation_index,
+ tgu_attr->reg_num);
+
+ tgu_drvdata->value_table->priority[index] = val;
+ return size;
+}
+
+static umode_t tgu_node_visible(struct kobject *kobject,
+ struct attribute *attr,
+ int n)
+{
+ struct device *dev = kobj_to_dev(kobject);
+ struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
+ int ret = SYSFS_GROUP_INVISIBLE;
+
+ struct device_attribute *dev_attr =
+ container_of(attr, struct device_attribute, attr);
+ struct tgu_attribute *tgu_attr =
+ container_of(dev_attr, struct tgu_attribute, attr);
+
+ if (tgu_attr->step_index < drvdata->max_step) {
+ ret = (tgu_attr->reg_num < drvdata->max_reg) ?
+ attr->mode : 0;
+ }
+ return ret;
+}
+
static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
{
+ int i, j, k, index;
+
TGU_UNLOCK(drvdata->base);
+ for (i = 0; i < drvdata->max_step; i++) {
+ for (j = 0; j < MAX_PRIORITY; j++) {
+ for (k = 0; k < drvdata->max_reg; k++) {
+ index = calculate_array_location(
+ drvdata, i, j, k);
+
+ writel(drvdata->value_table->priority[index],
+ drvdata->base +
+ PRIORITY_REG_STEP(i, j, k));
+ }
+ }
+ }
/* Enable TGU to program the triggers */
writel(1, drvdata->base + TGU_CONTROL);
TGU_LOCK(drvdata->base);
}
+static void tgu_set_reg_number(struct tgu_drvdata *drvdata)
+{
+ int num_sense_input;
+ int num_reg;
+ u32 devid;
+
+ devid = readl(drvdata->base + TGU_DEVID);
+
+ num_sense_input = TGU_DEVID_SENSE_INPUT(devid);
+ if (((num_sense_input * NUMBER_BITS_EACH_SIGNAL) % LENGTH_REGISTER) == 0)
+ num_reg = (num_sense_input * NUMBER_BITS_EACH_SIGNAL) / LENGTH_REGISTER;
+ else
+ num_reg = ((num_sense_input * NUMBER_BITS_EACH_SIGNAL) / LENGTH_REGISTER) + 1;
+ drvdata->max_reg = num_reg;
+
+}
+
+static void tgu_set_steps(struct tgu_drvdata *drvdata)
+{
+ u32 devid;
+
+ devid = readl(drvdata->base + TGU_DEVID);
+
+ drvdata->max_step = TGU_DEVID_STEPS(devid);
+}
+
static int tgu_enable(struct device *dev)
{
struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
@@ -106,6 +213,38 @@ static const struct attribute_group tgu_common_grp = {
static const struct attribute_group *tgu_attr_groups[] = {
&tgu_common_grp,
+ PRIORITY_ATTRIBUTE_GROUP_INIT(0, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(0, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(0, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(0, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(1, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(1, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(1, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(1, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(2, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(2, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(2, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(2, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(3, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(3, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(3, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(3, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(4, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(4, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(4, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(4, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(5, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(5, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(5, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(5, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(6, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(6, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(6, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(6, 3),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(7, 0),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(7, 1),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(7, 2),
+ PRIORITY_ATTRIBUTE_GROUP_INIT(7, 3),
NULL,
};
@@ -128,12 +267,29 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
spin_lock_init(&drvdata->lock);
+ tgu_set_reg_number(drvdata);
+ tgu_set_steps(drvdata);
+
ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
if (ret) {
dev_err(dev, "failed to create sysfs groups: %d\n", ret);
return ret;
}
+ drvdata->value_table =
+ devm_kzalloc(dev, sizeof(*drvdata->value_table), GFP_KERNEL);
+ if (!drvdata->value_table)
+ return -ENOMEM;
+
+ drvdata->value_table->priority = devm_kzalloc(
+ dev,
+ MAX_PRIORITY * drvdata->max_reg * drvdata->max_step *
+ sizeof(*(drvdata->value_table->priority)),
+ GFP_KERNEL);
+
+ if (!drvdata->value_table->priority)
+ return -ENOMEM;
+
drvdata->enable = false;
pm_runtime_put(&adev->dev);
diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
index abc732f91dfc..2cf95c239ee7 100644
--- a/drivers/hwtracing/qcom/tgu.h
+++ b/drivers/hwtracing/qcom/tgu.h
@@ -10,6 +10,113 @@
#define TGU_CONTROL 0x0000
#define TGU_LAR 0xfb0
#define TGU_UNLOCK_OFFSET 0xc5acce55
+#define TGU_DEVID 0xfc8
+
+#define BMVAL(val, lsb, msb) ((val & GENMASK(msb, lsb)) >> lsb)
+#define TGU_DEVID_SENSE_INPUT(devid_val) ((int) BMVAL(devid_val, 10, 17))
+#define TGU_DEVID_STEPS(devid_val) ((int)BMVAL(devid_val, 3, 6))
+#define NUMBER_BITS_EACH_SIGNAL 4
+#define LENGTH_REGISTER 32
+
+/*
+ * TGU configuration space Step configuration
+ * offset table space layout
+ * x-------------------------x$ x-------------x$
+ * | |$ | |$
+ * | | | reserve |$
+ * | | | |$
+ * |coresight management | |-------------|base+n*0x1D8+0x1F4$
+ * | registe | |---> |prioroty[3] |$
+ * | | | |-------------|base+n*0x1D8+0x194$
+ * | | | |prioroty[2] |$
+ * |-------------------------| | |-------------|base+n*0x1D8+0x134$
+ * | | | |prioroty[1] |$
+ * | step[7] | | |-------------|base+n*0x1D8+0xD4$
+ * |-------------------------|->base+0x40+7*0x1D8 | |prioroty[0] |$
+ * | | | |-------------|base+n*0x1D8+0x74$
+ * | ... | | | condition |$
+ * | | | | select |$
+ * |-------------------------|->base+0x40+1*0x1D8 | |-------------|base+n*0x1D8+0x60$
+ * | | | | condition |$
+ * | step[0] |--------------------> | decode |$
+ * |-------------------------|-> base+0x40 |-------------|base+n*0x1D8+0x50$
+ * | | | |$
+ * | Control and status space| |Timer/Counter|$
+ * | space | | |$
+ * x-------------------------x->base x-------------x base+n*0x1D8+0x40$
+ *
+ */
+#define STEP_OFFSET 0x1D8
+#define PRIORITY_START_OFFSET 0x0074
+#define PRIORITY_OFFSET 0x60
+#define REG_OFFSET 0x4
+
+/* Calculate compare step addresses */
+#define PRIORITY_REG_STEP(step, priority, reg)\
+ (PRIORITY_START_OFFSET + PRIORITY_OFFSET * priority +\
+ REG_OFFSET * reg + STEP_OFFSET * step)
+
+#define tgu_dataset_rw(name, step_index, type, reg_num) \
+ (&((struct tgu_attribute[]){ { \
+ __ATTR(name, 0644, tgu_dataset_show, tgu_dataset_store), \
+ step_index, \
+ type, \
+ reg_num, \
+ } })[0].attr.attr)
+
+#define STEP_PRIORITY(step_index, reg_num, priority) \
+ tgu_dataset_rw(reg##reg_num, step_index, TGU_PRIORITY##priority, \
+ reg_num)
+
+#define STEP_PRIORITY_LIST(step_index, priority) \
+ {STEP_PRIORITY(step_index, 0, priority), \
+ STEP_PRIORITY(step_index, 1, priority), \
+ STEP_PRIORITY(step_index, 2, priority), \
+ STEP_PRIORITY(step_index, 3, priority), \
+ STEP_PRIORITY(step_index, 4, priority), \
+ STEP_PRIORITY(step_index, 5, priority), \
+ STEP_PRIORITY(step_index, 6, priority), \
+ STEP_PRIORITY(step_index, 7, priority), \
+ STEP_PRIORITY(step_index, 8, priority), \
+ STEP_PRIORITY(step_index, 9, priority), \
+ STEP_PRIORITY(step_index, 10, priority), \
+ STEP_PRIORITY(step_index, 11, priority), \
+ STEP_PRIORITY(step_index, 12, priority), \
+ STEP_PRIORITY(step_index, 13, priority), \
+ STEP_PRIORITY(step_index, 14, priority), \
+ STEP_PRIORITY(step_index, 15, priority), \
+ STEP_PRIORITY(step_index, 16, priority), \
+ STEP_PRIORITY(step_index, 17, priority), \
+ NULL \
+ }
+
+#define PRIORITY_ATTRIBUTE_GROUP_INIT(step, priority)\
+ (&(const struct attribute_group){\
+ .attrs = (struct attribute*[])STEP_PRIORITY_LIST(step, priority),\
+ .is_visible = tgu_node_visible,\
+ .name = "step" #step "_priority" #priority \
+ })
+
+enum operation_index {
+ TGU_PRIORITY0,
+ TGU_PRIORITY1,
+ TGU_PRIORITY2,
+ TGU_PRIORITY3,
+};
+
+/* Maximum priority that TGU supports */
+#define MAX_PRIORITY 4
+
+struct tgu_attribute {
+ struct device_attribute attr;
+ u32 step_index;
+ enum operation_index operation_index;
+ u32 reg_num;
+};
+
+struct value_table {
+ unsigned int *priority;
+};
static inline void TGU_LOCK(void __iomem *addr)
{
@@ -35,6 +142,9 @@ static inline void TGU_UNLOCK(void __iomem *addr)
* @dev: Pointer to the associated device structure
* @lock: Spinlock for handling concurrent access
* @enable: Flag indicating whether the TGU device is enabled
+ * @value_table: Store given value based on relevant parameters.
+ * @max_reg: Maximum number of registers
+ * @max_step: Maximum step size
*
* This structure defines the data associated with a TGU device,
* including its base address, device pointers, clock, spinlock for
@@ -46,6 +156,9 @@ struct tgu_drvdata {
struct device *dev;
spinlock_t lock;
bool enable;
+ struct value_table *value_table;
+ int max_reg;
+ int max_step;
};
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v9 4/7] qcom-tgu: Add TGU decode support
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
` (2 preceding siblings ...)
2025-12-19 6:58 ` [PATCH v9 3/7] qcom-tgu: Add signal priority support Songwei Chai
@ 2025-12-19 6:58 ` Songwei Chai
2025-12-19 6:59 ` [PATCH v9 5/7] qcom-tgu: Add support to configure next action Songwei Chai
` (3 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:58 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
Decoding is when all the potential pieces for creating a trigger
are brought together for a given step. Example - there may be a
counter keeping track of some occurrences and a priority-group that
is being used to detect a pattern on the sense inputs. These 2
inputs to condition_decode must be programmed, for a given step,
to establish the condition for the trigger, or movement to another
steps.
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../ABI/testing/sysfs-bus-amba-devices-tgu | 7 +
drivers/hwtracing/qcom/tgu.c | 156 ++++++++++++++++--
drivers/hwtracing/qcom/tgu.h | 27 +++
3 files changed, 173 insertions(+), 17 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
index d04a01368089..c0e50ee95839 100644
--- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
+++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
@@ -14,3 +14,10 @@ KernelVersion 6.19
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
Description:
(RW) Set/Get the sensed signal with specific step and priority for TGU.
+
+What: /sys/bus/amba/devices/<tgu-name>/step[0:7]_condition_decode/reg[0:3]
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (RW) Set/Get the decode mode with specific step for TGU.
diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
index 447d7e68d132..4140dc544e5e 100644
--- a/drivers/hwtracing/qcom/tgu.c
+++ b/drivers/hwtracing/qcom/tgu.c
@@ -18,8 +18,36 @@ static int calculate_array_location(struct tgu_drvdata *drvdata,
int step_index, int operation_index,
int reg_index)
{
- return operation_index * (drvdata->max_step) * (drvdata->max_reg) +
- step_index * (drvdata->max_reg) + reg_index;
+ int ret = -EINVAL;
+
+ switch (operation_index) {
+ case TGU_PRIORITY0:
+ case TGU_PRIORITY1:
+ case TGU_PRIORITY2:
+ case TGU_PRIORITY3:
+ ret = operation_index * (drvdata->max_step) *
+ (drvdata->max_reg) +
+ step_index * (drvdata->max_reg) + reg_index;
+ break;
+ case TGU_CONDITION_DECODE:
+ ret = step_index * (drvdata->max_condition_decode) +
+ reg_index;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static int check_array_location(struct tgu_drvdata *drvdata, int step,
+ int ops, int reg)
+{
+ int result = calculate_array_location(drvdata, step, ops, reg);
+
+ if (result == -EINVAL)
+ dev_err(drvdata->dev, "%s - Fail\n", __func__);
+
+ return result;
}
static ssize_t tgu_dataset_show(struct device *dev,
@@ -30,12 +58,26 @@ static ssize_t tgu_dataset_show(struct device *dev,
struct tgu_attribute *tgu_attr =
container_of(attr, struct tgu_attribute, attr);
- index = calculate_array_location(drvdata, tgu_attr->step_index,
- tgu_attr->operation_index,
- tgu_attr->reg_num);
+ index = check_array_location(drvdata, tgu_attr->step_index,
+ tgu_attr->operation_index, tgu_attr->reg_num);
+
+ if (index == -EINVAL)
+ return -EINVAL;
- return sysfs_emit(buf, "0x%x\n",
- drvdata->value_table->priority[index]);
+ switch (tgu_attr->operation_index) {
+ case TGU_PRIORITY0:
+ case TGU_PRIORITY1:
+ case TGU_PRIORITY2:
+ case TGU_PRIORITY3:
+ return sysfs_emit(buf, "0x%x\n",
+ drvdata->value_table->priority[index]);
+ case TGU_CONDITION_DECODE:
+ return sysfs_emit(buf, "0x%x\n",
+ drvdata->value_table->condition_decode[index]);
+ default:
+ break;
+ }
+ return -EINVAL;
}
static ssize_t tgu_dataset_store(struct device *dev,
@@ -43,6 +85,7 @@ static ssize_t tgu_dataset_store(struct device *dev,
const char *buf, size_t size)
{
int index;
+ int ret = -EINVAL;
unsigned long val;
struct tgu_drvdata *tgu_drvdata = dev_get_drvdata(dev);
@@ -50,15 +93,32 @@ static ssize_t tgu_dataset_store(struct device *dev,
container_of(attr, struct tgu_attribute, attr);
if (kstrtoul(buf, 0, &val))
- return -EINVAL;
+ return ret;
guard(spinlock)(&tgu_drvdata->lock);
- index = calculate_array_location(tgu_drvdata, tgu_attr->step_index,
+ index = check_array_location(tgu_drvdata, tgu_attr->step_index,
tgu_attr->operation_index,
tgu_attr->reg_num);
- tgu_drvdata->value_table->priority[index] = val;
- return size;
+ if (index == -EINVAL)
+ return ret;
+
+ switch (tgu_attr->operation_index) {
+ case TGU_PRIORITY0:
+ case TGU_PRIORITY1:
+ case TGU_PRIORITY2:
+ case TGU_PRIORITY3:
+ tgu_drvdata->value_table->priority[index] = val;
+ ret = size;
+ break;
+ case TGU_CONDITION_DECODE:
+ tgu_drvdata->value_table->condition_decode[index] = val;
+ ret = size;
+ break;
+ default:
+ break;
+ }
+ return ret;
}
static umode_t tgu_node_visible(struct kobject *kobject,
@@ -75,13 +135,27 @@ static umode_t tgu_node_visible(struct kobject *kobject,
container_of(dev_attr, struct tgu_attribute, attr);
if (tgu_attr->step_index < drvdata->max_step) {
- ret = (tgu_attr->reg_num < drvdata->max_reg) ?
- attr->mode : 0;
+ switch (tgu_attr->operation_index) {
+ case TGU_PRIORITY0:
+ case TGU_PRIORITY1:
+ case TGU_PRIORITY2:
+ case TGU_PRIORITY3:
+ ret = (tgu_attr->reg_num < drvdata->max_reg) ?
+ attr->mode : 0;
+ break;
+ case TGU_CONDITION_DECODE:
+ ret = (tgu_attr->reg_num <
+ drvdata->max_condition_decode) ?
+ attr->mode : 0;
+ break;
+ default:
+ break;
+ }
}
return ret;
}
-static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
+static ssize_t tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
{
int i, j, k, index;
@@ -89,8 +163,10 @@ static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
for (i = 0; i < drvdata->max_step; i++) {
for (j = 0; j < MAX_PRIORITY; j++) {
for (k = 0; k < drvdata->max_reg; k++) {
- index = calculate_array_location(
+ index = check_array_location(
drvdata, i, j, k);
+ if (index == -EINVAL)
+ goto exit;
writel(drvdata->value_table->priority[index],
drvdata->base +
@@ -98,9 +174,23 @@ static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
}
}
}
+
+ for (i = 0; i < drvdata->max_step; i++) {
+ for (j = 0; j < drvdata->max_condition_decode; j++) {
+ index = check_array_location(drvdata, i,
+ TGU_CONDITION_DECODE, j);
+ if (index == -EINVAL)
+ goto exit;
+
+ writel(drvdata->value_table->condition_decode[index],
+ drvdata->base + CONDITION_DECODE_STEP(i, j));
+ }
+ }
/* Enable TGU to program the triggers */
writel(1, drvdata->base + TGU_CONTROL);
+exit:
TGU_LOCK(drvdata->base);
+ return index >= 0 ? 0 : -EINVAL;
}
static void tgu_set_reg_number(struct tgu_drvdata *drvdata)
@@ -129,18 +219,32 @@ static void tgu_set_steps(struct tgu_drvdata *drvdata)
drvdata->max_step = TGU_DEVID_STEPS(devid);
}
+static void tgu_set_conditions(struct tgu_drvdata *drvdata)
+{
+ u32 devid;
+
+ devid = readl(drvdata->base + TGU_DEVID);
+ drvdata->max_condition_decode = TGU_DEVID_CONDITIONS(devid);
+}
+
static int tgu_enable(struct device *dev)
{
+ int ret = 0;
struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
guard(spinlock)(&drvdata->lock);
if (drvdata->enable)
return -EBUSY;
- tgu_write_all_hw_regs(drvdata);
+ ret = tgu_write_all_hw_regs(drvdata);
+
+ if (ret == -EINVAL)
+ goto exit;
+
drvdata->enable = true;
- return 0;
+exit:
+ return ret;
}
static int tgu_disable(struct device *dev)
@@ -245,6 +349,14 @@ static const struct attribute_group *tgu_attr_groups[] = {
PRIORITY_ATTRIBUTE_GROUP_INIT(7, 1),
PRIORITY_ATTRIBUTE_GROUP_INIT(7, 2),
PRIORITY_ATTRIBUTE_GROUP_INIT(7, 3),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(0),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(1),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(2),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(3),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(4),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(5),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(6),
+ CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(7),
NULL,
};
@@ -269,6 +381,7 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
tgu_set_reg_number(drvdata);
tgu_set_steps(drvdata);
+ tgu_set_conditions(drvdata);
ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
if (ret) {
@@ -290,6 +403,15 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
if (!drvdata->value_table->priority)
return -ENOMEM;
+ drvdata->value_table->condition_decode = devm_kzalloc(
+ dev,
+ drvdata->max_condition_decode * drvdata->max_step *
+ sizeof(*(drvdata->value_table->condition_decode)),
+ GFP_KERNEL);
+
+ if (!drvdata->value_table->condition_decode)
+ return -ENOMEM;
+
drvdata->enable = false;
pm_runtime_put(&adev->dev);
diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
index 2cf95c239ee7..732126b896e1 100644
--- a/drivers/hwtracing/qcom/tgu.h
+++ b/drivers/hwtracing/qcom/tgu.h
@@ -15,6 +15,7 @@
#define BMVAL(val, lsb, msb) ((val & GENMASK(msb, lsb)) >> lsb)
#define TGU_DEVID_SENSE_INPUT(devid_val) ((int) BMVAL(devid_val, 10, 17))
#define TGU_DEVID_STEPS(devid_val) ((int)BMVAL(devid_val, 3, 6))
+#define TGU_DEVID_CONDITIONS(devid_val) ((int)BMVAL(devid_val, 0, 2))
#define NUMBER_BITS_EACH_SIGNAL 4
#define LENGTH_REGISTER 32
@@ -48,6 +49,7 @@
*/
#define STEP_OFFSET 0x1D8
#define PRIORITY_START_OFFSET 0x0074
+#define CONDITION_DECODE_OFFSET 0x0050
#define PRIORITY_OFFSET 0x60
#define REG_OFFSET 0x4
@@ -56,6 +58,9 @@
(PRIORITY_START_OFFSET + PRIORITY_OFFSET * priority +\
REG_OFFSET * reg + STEP_OFFSET * step)
+#define CONDITION_DECODE_STEP(step, decode) \
+ (CONDITION_DECODE_OFFSET + REG_OFFSET * decode + STEP_OFFSET * step)
+
#define tgu_dataset_rw(name, step_index, type, reg_num) \
(&((struct tgu_attribute[]){ { \
__ATTR(name, 0644, tgu_dataset_show, tgu_dataset_store), \
@@ -68,6 +73,9 @@
tgu_dataset_rw(reg##reg_num, step_index, TGU_PRIORITY##priority, \
reg_num)
+#define STEP_DECODE(step_index, reg_num) \
+ tgu_dataset_rw(reg##reg_num, step_index, TGU_CONDITION_DECODE, reg_num)
+
#define STEP_PRIORITY_LIST(step_index, priority) \
{STEP_PRIORITY(step_index, 0, priority), \
STEP_PRIORITY(step_index, 1, priority), \
@@ -90,6 +98,14 @@
NULL \
}
+#define STEP_DECODE_LIST(n) \
+ {STEP_DECODE(n, 0), \
+ STEP_DECODE(n, 1), \
+ STEP_DECODE(n, 2), \
+ STEP_DECODE(n, 3), \
+ NULL \
+ }
+
#define PRIORITY_ATTRIBUTE_GROUP_INIT(step, priority)\
(&(const struct attribute_group){\
.attrs = (struct attribute*[])STEP_PRIORITY_LIST(step, priority),\
@@ -97,11 +113,19 @@
.name = "step" #step "_priority" #priority \
})
+#define CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(step)\
+ (&(const struct attribute_group){\
+ .attrs = (struct attribute*[])STEP_DECODE_LIST(step),\
+ .is_visible = tgu_node_visible,\
+ .name = "step" #step "_condition_decode" \
+ })
+
enum operation_index {
TGU_PRIORITY0,
TGU_PRIORITY1,
TGU_PRIORITY2,
TGU_PRIORITY3,
+ TGU_CONDITION_DECODE,
};
/* Maximum priority that TGU supports */
@@ -116,6 +140,7 @@ struct tgu_attribute {
struct value_table {
unsigned int *priority;
+ unsigned int *condition_decode;
};
static inline void TGU_LOCK(void __iomem *addr)
@@ -145,6 +170,7 @@ static inline void TGU_UNLOCK(void __iomem *addr)
* @value_table: Store given value based on relevant parameters.
* @max_reg: Maximum number of registers
* @max_step: Maximum step size
+ * @max_condition_decode: Maximum number of condition_decode
*
* This structure defines the data associated with a TGU device,
* including its base address, device pointers, clock, spinlock for
@@ -159,6 +185,7 @@ struct tgu_drvdata {
struct value_table *value_table;
int max_reg;
int max_step;
+ int max_condition_decode;
};
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v9 5/7] qcom-tgu: Add support to configure next action
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
` (3 preceding siblings ...)
2025-12-19 6:58 ` [PATCH v9 4/7] qcom-tgu: Add TGU decode support Songwei Chai
@ 2025-12-19 6:59 ` Songwei Chai
2025-12-19 6:59 ` [PATCH v9 6/7] qcom-tgu: Add timer/counter functionality for TGU Songwei Chai
` (2 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:59 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
Add "select" node for each step to determine if another step is taken,
trigger(s) are generated, counters/timers incremented/decremented, etc.
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../ABI/testing/sysfs-bus-amba-devices-tgu | 7 +++
drivers/hwtracing/qcom/tgu.c | 52 +++++++++++++++++++
drivers/hwtracing/qcom/tgu.h | 27 ++++++++++
3 files changed, 86 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
index c0e50ee95839..6fbd86592681 100644
--- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
+++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
@@ -21,3 +21,10 @@ KernelVersion 6.19
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
Description:
(RW) Set/Get the decode mode with specific step for TGU.
+
+What: /sys/bus/amba/devices/<tgu-name>/step[0:7]_condition_select/reg[0:3]
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (RW) Set/Get the next action with specific step for TGU.
diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
index 4140dc544e5e..98648ee61a10 100644
--- a/drivers/hwtracing/qcom/tgu.c
+++ b/drivers/hwtracing/qcom/tgu.c
@@ -33,6 +33,10 @@ static int calculate_array_location(struct tgu_drvdata *drvdata,
ret = step_index * (drvdata->max_condition_decode) +
reg_index;
break;
+ case TGU_CONDITION_SELECT:
+ ret = step_index * (drvdata->max_condition_select) +
+ reg_index;
+ break;
default:
break;
}
@@ -74,6 +78,9 @@ static ssize_t tgu_dataset_show(struct device *dev,
case TGU_CONDITION_DECODE:
return sysfs_emit(buf, "0x%x\n",
drvdata->value_table->condition_decode[index]);
+ case TGU_CONDITION_SELECT:
+ return sysfs_emit(buf, "0x%x\n",
+ drvdata->value_table->condition_select[index]);
default:
break;
}
@@ -115,6 +122,10 @@ static ssize_t tgu_dataset_store(struct device *dev,
tgu_drvdata->value_table->condition_decode[index] = val;
ret = size;
break;
+ case TGU_CONDITION_SELECT:
+ tgu_drvdata->value_table->condition_select[index] = val;
+ ret = size;
+ break;
default:
break;
}
@@ -148,6 +159,15 @@ static umode_t tgu_node_visible(struct kobject *kobject,
drvdata->max_condition_decode) ?
attr->mode : 0;
break;
+ case TGU_CONDITION_SELECT:
+ /* 'default' register is at the end of 'select' region */
+ if (tgu_attr->reg_num ==
+ drvdata->max_condition_select - 1)
+ attr->name = "default";
+ ret = (tgu_attr->reg_num <
+ drvdata->max_condition_select) ?
+ attr->mode : 0;
+ break;
default:
break;
}
@@ -186,6 +206,19 @@ static ssize_t tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
drvdata->base + CONDITION_DECODE_STEP(i, j));
}
}
+
+ for (i = 0; i < drvdata->max_step; i++) {
+ for (j = 0; j < drvdata->max_condition_select; j++) {
+ index = check_array_location(drvdata, i,
+ TGU_CONDITION_SELECT, j);
+
+ if (index == -EINVAL)
+ goto exit;
+
+ writel(drvdata->value_table->condition_select[index],
+ drvdata->base + CONDITION_SELECT_STEP(i, j));
+ }
+ }
/* Enable TGU to program the triggers */
writel(1, drvdata->base + TGU_CONTROL);
exit:
@@ -225,6 +258,8 @@ static void tgu_set_conditions(struct tgu_drvdata *drvdata)
devid = readl(drvdata->base + TGU_DEVID);
drvdata->max_condition_decode = TGU_DEVID_CONDITIONS(devid);
+ /* select region has an additional 'default' register */
+ drvdata->max_condition_select = TGU_DEVID_CONDITIONS(devid) + 1;
}
static int tgu_enable(struct device *dev)
@@ -357,6 +392,14 @@ static const struct attribute_group *tgu_attr_groups[] = {
CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(5),
CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(6),
CONDITION_DECODE_ATTRIBUTE_GROUP_INIT(7),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(0),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(1),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(2),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(3),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(4),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(5),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(6),
+ CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(7),
NULL,
};
@@ -412,6 +455,15 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
if (!drvdata->value_table->condition_decode)
return -ENOMEM;
+ drvdata->value_table->condition_select = devm_kzalloc(
+ dev,
+ drvdata->max_condition_select * drvdata->max_step *
+ sizeof(*(drvdata->value_table->condition_select)),
+ GFP_KERNEL);
+
+ if (!drvdata->value_table->condition_select)
+ return -ENOMEM;
+
drvdata->enable = false;
pm_runtime_put(&adev->dev);
diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
index 732126b896e1..1f46da35b40a 100644
--- a/drivers/hwtracing/qcom/tgu.h
+++ b/drivers/hwtracing/qcom/tgu.h
@@ -50,6 +50,7 @@
#define STEP_OFFSET 0x1D8
#define PRIORITY_START_OFFSET 0x0074
#define CONDITION_DECODE_OFFSET 0x0050
+#define CONDITION_SELECT_OFFSET 0x0060
#define PRIORITY_OFFSET 0x60
#define REG_OFFSET 0x4
@@ -61,6 +62,9 @@
#define CONDITION_DECODE_STEP(step, decode) \
(CONDITION_DECODE_OFFSET + REG_OFFSET * decode + STEP_OFFSET * step)
+#define CONDITION_SELECT_STEP(step, select) \
+ (CONDITION_SELECT_OFFSET + REG_OFFSET * select + STEP_OFFSET * step)
+
#define tgu_dataset_rw(name, step_index, type, reg_num) \
(&((struct tgu_attribute[]){ { \
__ATTR(name, 0644, tgu_dataset_show, tgu_dataset_store), \
@@ -76,6 +80,9 @@
#define STEP_DECODE(step_index, reg_num) \
tgu_dataset_rw(reg##reg_num, step_index, TGU_CONDITION_DECODE, reg_num)
+#define STEP_SELECT(step_index, reg_num) \
+ tgu_dataset_rw(reg##reg_num, step_index, TGU_CONDITION_SELECT, reg_num)
+
#define STEP_PRIORITY_LIST(step_index, priority) \
{STEP_PRIORITY(step_index, 0, priority), \
STEP_PRIORITY(step_index, 1, priority), \
@@ -106,6 +113,15 @@
NULL \
}
+#define STEP_SELECT_LIST(n) \
+ {STEP_SELECT(n, 0), \
+ STEP_SELECT(n, 1), \
+ STEP_SELECT(n, 2), \
+ STEP_SELECT(n, 3), \
+ STEP_SELECT(n, 4), \
+ NULL \
+ }
+
#define PRIORITY_ATTRIBUTE_GROUP_INIT(step, priority)\
(&(const struct attribute_group){\
.attrs = (struct attribute*[])STEP_PRIORITY_LIST(step, priority),\
@@ -120,12 +136,20 @@
.name = "step" #step "_condition_decode" \
})
+#define CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(step)\
+ (&(const struct attribute_group){\
+ .attrs = (struct attribute*[])STEP_SELECT_LIST(step),\
+ .is_visible = tgu_node_visible,\
+ .name = "step" #step "_condition_select" \
+ })
+
enum operation_index {
TGU_PRIORITY0,
TGU_PRIORITY1,
TGU_PRIORITY2,
TGU_PRIORITY3,
TGU_CONDITION_DECODE,
+ TGU_CONDITION_SELECT,
};
/* Maximum priority that TGU supports */
@@ -141,6 +165,7 @@ struct tgu_attribute {
struct value_table {
unsigned int *priority;
unsigned int *condition_decode;
+ unsigned int *condition_select;
};
static inline void TGU_LOCK(void __iomem *addr)
@@ -171,6 +196,7 @@ static inline void TGU_UNLOCK(void __iomem *addr)
* @max_reg: Maximum number of registers
* @max_step: Maximum step size
* @max_condition_decode: Maximum number of condition_decode
+ * @max_condition_select: Maximum number of condition_select
*
* This structure defines the data associated with a TGU device,
* including its base address, device pointers, clock, spinlock for
@@ -186,6 +212,7 @@ struct tgu_drvdata {
int max_reg;
int max_step;
int max_condition_decode;
+ int max_condition_select;
};
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v9 6/7] qcom-tgu: Add timer/counter functionality for TGU
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
` (4 preceding siblings ...)
2025-12-19 6:59 ` [PATCH v9 5/7] qcom-tgu: Add support to configure next action Songwei Chai
@ 2025-12-19 6:59 ` Songwei Chai
2025-12-19 6:59 ` [PATCH v9 7/7] qcom-tgu: Add reset node to initialize Songwei Chai
2025-12-25 1:52 ` [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
7 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:59 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
Add counter and timer node for each step which could be
programed if they are to be utilized in trigger event/sequence.
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../ABI/testing/sysfs-bus-amba-devices-tgu | 14 ++
drivers/hwtracing/qcom/tgu.c | 120 ++++++++++++++++++
drivers/hwtracing/qcom/tgu.h | 54 ++++++++
3 files changed, 188 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
index 6fbd86592681..010eade0a1c5 100644
--- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
+++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
@@ -28,3 +28,17 @@ KernelVersion 6.19
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
Description:
(RW) Set/Get the next action with specific step for TGU.
+
+What: /sys/bus/amba/devices/<tgu-name>/step[0:7]_timer/reg[0:1]
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (RW) Set/Get the timer value with specific step for TGU.
+
+What: /sys/bus/amba/devices/<tgu-name>/step[0:7]_counter/reg[0:1]
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (RW) Set/Get the counter value with specific step for TGU.
diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
index 98648ee61a10..d4210869556e 100644
--- a/drivers/hwtracing/qcom/tgu.c
+++ b/drivers/hwtracing/qcom/tgu.c
@@ -37,6 +37,12 @@ static int calculate_array_location(struct tgu_drvdata *drvdata,
ret = step_index * (drvdata->max_condition_select) +
reg_index;
break;
+ case TGU_COUNTER:
+ ret = step_index * (drvdata->max_counter) + reg_index;
+ break;
+ case TGU_TIMER:
+ ret = step_index * (drvdata->max_timer) + reg_index;
+ break;
default:
break;
}
@@ -81,6 +87,12 @@ static ssize_t tgu_dataset_show(struct device *dev,
case TGU_CONDITION_SELECT:
return sysfs_emit(buf, "0x%x\n",
drvdata->value_table->condition_select[index]);
+ case TGU_TIMER:
+ return sysfs_emit(buf, "0x%x\n",
+ drvdata->value_table->timer[index]);
+ case TGU_COUNTER:
+ return sysfs_emit(buf, "0x%x\n",
+ drvdata->value_table->counter[index]);
default:
break;
}
@@ -126,6 +138,14 @@ static ssize_t tgu_dataset_store(struct device *dev,
tgu_drvdata->value_table->condition_select[index] = val;
ret = size;
break;
+ case TGU_TIMER:
+ tgu_drvdata->value_table->timer[index] = val;
+ ret = size;
+ break;
+ case TGU_COUNTER:
+ tgu_drvdata->value_table->counter[index] = val;
+ ret = size;
+ break;
default:
break;
}
@@ -168,6 +188,22 @@ static umode_t tgu_node_visible(struct kobject *kobject,
drvdata->max_condition_select) ?
attr->mode : 0;
break;
+ case TGU_COUNTER:
+ if (drvdata->max_counter == 0)
+ ret = SYSFS_GROUP_INVISIBLE;
+ else
+ ret = (tgu_attr->reg_num <
+ drvdata->max_counter) ?
+ attr->mode : 0;
+ break;
+ case TGU_TIMER:
+ if (drvdata->max_timer == 0)
+ ret = SYSFS_GROUP_INVISIBLE;
+ else
+ ret = (tgu_attr->reg_num <
+ drvdata->max_timer) ?
+ attr->mode : 0;
+ break;
default:
break;
}
@@ -219,6 +255,30 @@ static ssize_t tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
drvdata->base + CONDITION_SELECT_STEP(i, j));
}
}
+
+ for (i = 0; i < drvdata->max_step; i++) {
+ for (j = 0; j < drvdata->max_timer; j++) {
+ index = check_array_location(drvdata, i, TGU_TIMER, j);
+
+ if (index == -EINVAL)
+ goto exit;
+
+ writel(drvdata->value_table->timer[index],
+ drvdata->base + TIMER_COMPARE_STEP(i, j));
+ }
+ }
+
+ for (i = 0; i < drvdata->max_step; i++) {
+ for (j = 0; j < drvdata->max_counter; j++) {
+ index = check_array_location(drvdata, i, TGU_COUNTER, j);
+
+ if (index == -EINVAL)
+ goto exit;
+
+ writel(drvdata->value_table->counter[index],
+ drvdata->base + COUNTER_COMPARE_STEP(i, j));
+ }
+ }
/* Enable TGU to program the triggers */
writel(1, drvdata->base + TGU_CONTROL);
exit:
@@ -262,6 +322,31 @@ static void tgu_set_conditions(struct tgu_drvdata *drvdata)
drvdata->max_condition_select = TGU_DEVID_CONDITIONS(devid) + 1;
}
+static void tgu_set_timer_counter(struct tgu_drvdata *drvdata)
+{
+ int num_timers, num_counters;
+ u32 devid2;
+
+ devid2 = readl(drvdata->base + CORESIGHT_DEVID2);
+
+ if (TGU_DEVID2_TIMER0(devid2) && TGU_DEVID2_TIMER1(devid2))
+ num_timers = 2;
+ else if (TGU_DEVID2_TIMER0(devid2) || TGU_DEVID2_TIMER1(devid2))
+ num_timers = 1;
+ else
+ num_timers = 0;
+
+ if (TGU_DEVID2_COUNTER0(devid2) && TGU_DEVID2_COUNTER1(devid2))
+ num_counters = 2;
+ else if (TGU_DEVID2_COUNTER0(devid2) || TGU_DEVID2_COUNTER1(devid2))
+ num_counters = 1;
+ else
+ num_counters = 0;
+
+ drvdata->max_timer = num_timers;
+ drvdata->max_counter = num_counters;
+}
+
static int tgu_enable(struct device *dev)
{
int ret = 0;
@@ -400,6 +485,22 @@ static const struct attribute_group *tgu_attr_groups[] = {
CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(5),
CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(6),
CONDITION_SELECT_ATTRIBUTE_GROUP_INIT(7),
+ TIMER_ATTRIBUTE_GROUP_INIT(0),
+ TIMER_ATTRIBUTE_GROUP_INIT(1),
+ TIMER_ATTRIBUTE_GROUP_INIT(2),
+ TIMER_ATTRIBUTE_GROUP_INIT(3),
+ TIMER_ATTRIBUTE_GROUP_INIT(4),
+ TIMER_ATTRIBUTE_GROUP_INIT(5),
+ TIMER_ATTRIBUTE_GROUP_INIT(6),
+ TIMER_ATTRIBUTE_GROUP_INIT(7),
+ COUNTER_ATTRIBUTE_GROUP_INIT(0),
+ COUNTER_ATTRIBUTE_GROUP_INIT(1),
+ COUNTER_ATTRIBUTE_GROUP_INIT(2),
+ COUNTER_ATTRIBUTE_GROUP_INIT(3),
+ COUNTER_ATTRIBUTE_GROUP_INIT(4),
+ COUNTER_ATTRIBUTE_GROUP_INIT(5),
+ COUNTER_ATTRIBUTE_GROUP_INIT(6),
+ COUNTER_ATTRIBUTE_GROUP_INIT(7),
NULL,
};
@@ -425,6 +526,7 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
tgu_set_reg_number(drvdata);
tgu_set_steps(drvdata);
tgu_set_conditions(drvdata);
+ tgu_set_timer_counter(drvdata);
ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
if (ret) {
@@ -464,6 +566,24 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
if (!drvdata->value_table->condition_select)
return -ENOMEM;
+ drvdata->value_table->timer = devm_kzalloc(
+ dev,
+ drvdata->max_step * drvdata->max_timer *
+ sizeof(*(drvdata->value_table->timer)),
+ GFP_KERNEL);
+
+ if (!drvdata->value_table->timer)
+ return -ENOMEM;
+
+ drvdata->value_table->counter = devm_kzalloc(
+ dev,
+ drvdata->max_step * drvdata->max_counter *
+ sizeof(*(drvdata->value_table->counter)),
+ GFP_KERNEL);
+
+ if (!drvdata->value_table->counter)
+ return -ENOMEM;
+
drvdata->enable = false;
pm_runtime_put(&adev->dev);
diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
index 1f46da35b40a..46a4cffedd7b 100644
--- a/drivers/hwtracing/qcom/tgu.h
+++ b/drivers/hwtracing/qcom/tgu.h
@@ -11,11 +11,17 @@
#define TGU_LAR 0xfb0
#define TGU_UNLOCK_OFFSET 0xc5acce55
#define TGU_DEVID 0xfc8
+#define CORESIGHT_DEVID2 0xfc0
#define BMVAL(val, lsb, msb) ((val & GENMASK(msb, lsb)) >> lsb)
#define TGU_DEVID_SENSE_INPUT(devid_val) ((int) BMVAL(devid_val, 10, 17))
#define TGU_DEVID_STEPS(devid_val) ((int)BMVAL(devid_val, 3, 6))
#define TGU_DEVID_CONDITIONS(devid_val) ((int)BMVAL(devid_val, 0, 2))
+#define TGU_DEVID2_TIMER0(devid_val) ((int)BMVAL(devid_val, 18, 23))
+#define TGU_DEVID2_TIMER1(devid_val) ((int)BMVAL(devid_val, 13, 17))
+#define TGU_DEVID2_COUNTER0(devid_val) ((int)BMVAL(devid_val, 6, 11))
+#define TGU_DEVID2_COUNTER1(devid_val) ((int)BMVAL(devid_val, 0, 5))
+
#define NUMBER_BITS_EACH_SIGNAL 4
#define LENGTH_REGISTER 32
@@ -51,6 +57,8 @@
#define PRIORITY_START_OFFSET 0x0074
#define CONDITION_DECODE_OFFSET 0x0050
#define CONDITION_SELECT_OFFSET 0x0060
+#define TIMER_START_OFFSET 0x0040
+#define COUNTER_START_OFFSET 0x0048
#define PRIORITY_OFFSET 0x60
#define REG_OFFSET 0x4
@@ -62,6 +70,12 @@
#define CONDITION_DECODE_STEP(step, decode) \
(CONDITION_DECODE_OFFSET + REG_OFFSET * decode + STEP_OFFSET * step)
+#define TIMER_COMPARE_STEP(step, timer) \
+ (TIMER_START_OFFSET + REG_OFFSET * timer + STEP_OFFSET * step)
+
+#define COUNTER_COMPARE_STEP(step, counter) \
+ (COUNTER_START_OFFSET + REG_OFFSET * counter + STEP_OFFSET * step)
+
#define CONDITION_SELECT_STEP(step, select) \
(CONDITION_SELECT_OFFSET + REG_OFFSET * select + STEP_OFFSET * step)
@@ -83,6 +97,12 @@
#define STEP_SELECT(step_index, reg_num) \
tgu_dataset_rw(reg##reg_num, step_index, TGU_CONDITION_SELECT, reg_num)
+#define STEP_TIMER(step_index, reg_num) \
+ tgu_dataset_rw(reg##reg_num, step_index, TGU_TIMER, reg_num)
+
+#define STEP_COUNTER(step_index, reg_num) \
+ tgu_dataset_rw(reg##reg_num, step_index, TGU_COUNTER, reg_num)
+
#define STEP_PRIORITY_LIST(step_index, priority) \
{STEP_PRIORITY(step_index, 0, priority), \
STEP_PRIORITY(step_index, 1, priority), \
@@ -122,6 +142,18 @@
NULL \
}
+#define STEP_TIMER_LIST(n) \
+ {STEP_TIMER(n, 0), \
+ STEP_TIMER(n, 1), \
+ NULL \
+ }
+
+#define STEP_COUNTER_LIST(n) \
+ {STEP_COUNTER(n, 0), \
+ STEP_COUNTER(n, 1), \
+ NULL \
+ }
+
#define PRIORITY_ATTRIBUTE_GROUP_INIT(step, priority)\
(&(const struct attribute_group){\
.attrs = (struct attribute*[])STEP_PRIORITY_LIST(step, priority),\
@@ -143,6 +175,20 @@
.name = "step" #step "_condition_select" \
})
+#define TIMER_ATTRIBUTE_GROUP_INIT(step)\
+ (&(const struct attribute_group){\
+ .attrs = (struct attribute*[])STEP_TIMER_LIST(step),\
+ .is_visible = tgu_node_visible,\
+ .name = "step" #step "_timer" \
+ })
+
+#define COUNTER_ATTRIBUTE_GROUP_INIT(step)\
+ (&(const struct attribute_group){\
+ .attrs = (struct attribute*[])STEP_COUNTER_LIST(step),\
+ .is_visible = tgu_node_visible,\
+ .name = "step" #step "_counter" \
+ })
+
enum operation_index {
TGU_PRIORITY0,
TGU_PRIORITY1,
@@ -150,6 +196,8 @@ enum operation_index {
TGU_PRIORITY3,
TGU_CONDITION_DECODE,
TGU_CONDITION_SELECT,
+ TGU_TIMER,
+ TGU_COUNTER
};
/* Maximum priority that TGU supports */
@@ -166,6 +214,8 @@ struct value_table {
unsigned int *priority;
unsigned int *condition_decode;
unsigned int *condition_select;
+ unsigned int *timer;
+ unsigned int *counter;
};
static inline void TGU_LOCK(void __iomem *addr)
@@ -197,6 +247,8 @@ static inline void TGU_UNLOCK(void __iomem *addr)
* @max_step: Maximum step size
* @max_condition_decode: Maximum number of condition_decode
* @max_condition_select: Maximum number of condition_select
+ * @max_timer: Maximum number of timers
+ * @max_counter: Maximum number of counters
*
* This structure defines the data associated with a TGU device,
* including its base address, device pointers, clock, spinlock for
@@ -213,6 +265,8 @@ struct tgu_drvdata {
int max_step;
int max_condition_decode;
int max_condition_select;
+ int max_timer;
+ int max_counter;
};
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v9 7/7] qcom-tgu: Add reset node to initialize
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
` (5 preceding siblings ...)
2025-12-19 6:59 ` [PATCH v9 6/7] qcom-tgu: Add timer/counter functionality for TGU Songwei Chai
@ 2025-12-19 6:59 ` Songwei Chai
2025-12-25 5:56 ` Jie Gan
2026-01-06 10:16 ` Suzuki K Poulose
2025-12-25 1:52 ` [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
7 siblings, 2 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-19 6:59 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: Songwei Chai, linux-kernel, linux-arm-kernel, linux-arm-msm,
coresight, devicetree, gregkh
Add reset node to initialize the value of
priority/condition_decode/condition_select/timer/counter nodes.
Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
---
.../ABI/testing/sysfs-bus-amba-devices-tgu | 7 ++
drivers/hwtracing/qcom/tgu.c | 74 +++++++++++++++++++
2 files changed, 81 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
index 010eade0a1c5..0733b3e07b45 100644
--- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
+++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
@@ -42,3 +42,10 @@ KernelVersion 6.19
Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
Description:
(RW) Set/Get the counter value with specific step for TGU.
+
+What: /sys/bus/amba/devices/<tgu-name>/reset_tgu
+Date: December 2025
+KernelVersion 6.19
+Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
+Description:
+ (Write) Write 1 to reset the dataset for TGU.
diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
index d4210869556e..5a8c6af9b719 100644
--- a/drivers/hwtracing/qcom/tgu.c
+++ b/drivers/hwtracing/qcom/tgu.c
@@ -425,8 +425,82 @@ static ssize_t enable_tgu_store(struct device *dev,
}
static DEVICE_ATTR_RW(enable_tgu);
+/* reset_tgu_store - Reset Trace and Gating Unit (TGU) configuration. */
+static ssize_t reset_tgu_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t size)
+{
+ unsigned long value;
+ struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
+ int i, j, ret;
+
+ if (kstrtoul(buf, 0, &value) || value == 0)
+ return -EINVAL;
+
+ if (!drvdata->enable) {
+ ret = pm_runtime_get_sync(drvdata->dev);
+ if (ret < 0) {
+ pm_runtime_put(drvdata->dev);
+ return ret;
+ }
+ }
+
+ guard(spinlock)(&drvdata->lock);
+ TGU_UNLOCK(drvdata->base);
+
+ writel(0, drvdata->base + TGU_CONTROL);
+
+ if (drvdata->value_table->priority)
+ memset(drvdata->value_table->priority, 0,
+ MAX_PRIORITY * drvdata->max_step *
+ drvdata->max_reg * sizeof(unsigned int));
+
+ if (drvdata->value_table->condition_decode)
+ memset(drvdata->value_table->condition_decode, 0,
+ drvdata->max_condition_decode * drvdata->max_step *
+ sizeof(unsigned int));
+
+ /* Initialize all condition registers to NOT(value=0x1000000) */
+ for (i = 0; i < drvdata->max_step; i++) {
+ for (j = 0; j < drvdata->max_condition_decode; j++) {
+ drvdata->value_table
+ ->condition_decode[calculate_array_location(
+ drvdata, i, TGU_CONDITION_DECODE, j)] =
+ 0x1000000;
+ }
+ }
+
+ if (drvdata->value_table->condition_select)
+ memset(drvdata->value_table->condition_select, 0,
+ drvdata->max_condition_select * drvdata->max_step *
+ sizeof(unsigned int));
+
+ if (drvdata->value_table->timer)
+ memset(drvdata->value_table->timer, 0,
+ (drvdata->max_step) *
+ (drvdata->max_timer) *
+ sizeof(unsigned int));
+
+ if (drvdata->value_table->counter)
+ memset(drvdata->value_table->counter, 0,
+ (drvdata->max_step) *
+ (drvdata->max_counter) *
+ sizeof(unsigned int));
+
+ dev_dbg(dev, "Coresight-TGU reset complete\n");
+
+ TGU_LOCK(drvdata->base);
+
+ drvdata->enable = false;
+ pm_runtime_put(drvdata->dev);
+
+ return size;
+}
+static DEVICE_ATTR_WO(reset_tgu);
+
static struct attribute *tgu_common_attrs[] = {
&dev_attr_enable_tgu.attr,
+ &dev_attr_reset_tgu.attr,
NULL,
};
--
2.34.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v9 0/7] Provide support for Trigger Generation Unit
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
` (6 preceding siblings ...)
2025-12-19 6:59 ` [PATCH v9 7/7] qcom-tgu: Add reset node to initialize Songwei Chai
@ 2025-12-25 1:52 ` Songwei Chai
7 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2025-12-25 1:52 UTC (permalink / raw)
To: andersson, alexander.shishkin, mike.leach, suzuki.poulose,
james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
Gentle Reminder.
On 12/19/2025 2:58 PM, Songwei Chai wrote:
> We propose creating a new qcom directory under drivers/hwtracing
> to host this TGU driver, as well as additional Qualcomm-specific
> hwtracing drivers that we plan to submit in the coming months.
> This structure will help organize vendor-specific implementations
> and facilitate future development and maintenance.
>
> Feedback from the community on this proposal is highly appreciated.
>
> - Why we are proposing this:
>
> TGU has the ability to monitor signal conditions and trigger debug-related
> actions, serving as a programmable hardware component that enhances system
> trace and debug capabilities. Placing it under drivers/hwtracing aligns with
> its function as a trace generation utility.
>
> We previously attempted to push this driver to drivers/hwtracing/coresight,
> but did not receive support from the maintainers of the CoreSight subsystem.
> The reason provided was: “This component is primarily a part of the
> Qualcomm proprietary QPMDA subsystem, and is capable of operating
> independently from the CoreSight hardware trace generation system.”
>
> Chat history : https://lore.kernel.org/all/CAJ9a7ViKxHThyZfFFDV_FkNRimk4uo1NrMtQ-kcaj1qO4ZcGnA@mail.gmail.com/
>
> Given this, we have been considering whether it would be appropriate
> to create a dedicated drivers/hwtracing/qcom directory for
> Qualcomm-related hwtracing drivers. This would follow the precedent set
> by Intel, which maintains its own directory at drivers/hwtracing/intel_th.
> We believe this structure would significantly facilitate
> future submissions of related Qualcomm drivers.
>
> - Maintenance of drivers/hwtracing/qcom:
>
> Bjorn, who maintains linux-arm-msm, will be the maintainer of this
> directory — we’ve discussed this with him and he’s aware that his task
> list may grow accordingly. Additionally, Qualcomm engineers familiar with
> the debug hardware — such as [Tingwei Zhang, Jinlong Mao, Songwei Chai],
> will be available to review incoming patches and support ongoing
> development.
>
> - Detail for TGU:
>
> This component can be utilized to sense a plurality of signals and
> create a trigger into the CTI or generate interrupts to processors
> once the input signal meets the conditions. We can treat the TGU’s
> workflow as a flowsheet, it has some “steps” regions for customization.
> In each step region, we can set the signals that we want with priority
> in priority_group, set the conditions in each step via condition_decode,
> and set the resultant action by condition_select. Meanwhile,
> some TGUs (not all) also provide timer/counter functionality.
> Based on the characteristics described above, we consider the TGU as a
> helper in the CoreSight subsystem. Its master device is the TPDM, which
> can transmit signals from other subsystems, and we reuse the existing
> ports mechanism to link the TPDM to the connected TGU.
>
> Here is a detailed example to explain how to use the TGU:
>
> In this example, the TGU is configured to use 2 conditions, 2 steps, and
> the timer. The goal is to look for one of two patterns which are generated
> from TPDM, giving priority to one, and then generate a trigger once the
> timer reaches a certain value. In other words, two conditions are used
> for the first step to look for the two patterns, where the one with the
> highest priority is used in the first condition. Then, in the second step,
> the timer is enabled and set to be compared to the given value at each
> clock cycle. These steps are better shown below.
>
> |-----------------|
> | |
> | TPDM |
> | |
> |-----------------|
> |
> |
> --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ------
> | | |
> | | |--------------------| |
> | |---- ---> | | Go to next steps | |
> | | | |--- ---> | Enable timer | |
> | | v | | | |
> | | |-----------------| | |--------------------| |
> | | | | Yes | | |
> | | | inputs==0xB | ----->| | <-------- |
> | | | | | | No | |
> | No | |-----------------| | v | |
> | | | | |-----------------| | |
> | | | | | | | |
> | | | | | timer>=3 |-- |
> | | v | | | |
> | | |-----------------| | |-----------------| |
> | | | | Yes | | |
> | |--- | inputs==0xA | ----->| | Yes |
> | | | | |
> | |-----------------| v |
> | |-----------------| |
> | | | |
> | | Trigger | |
> | | | |
> | |-----------------| |
> | TGU | |
> |--- --- --- --- --- --- --- --- --- --- --- --- --- --- |--- --- -- |
> |
> v
> |-----------------|
> |The controllers |
> |which will use |
> |triggers further |
> |-----------------|
>
> steps:
> 1. Reset TGU /*it will disable tgu and reset dataset*/
> - echo 1 > /sys/bus/amba/devices/<tgu-name>/reset_tgu
>
> 2. Set the pattern match for priority0 to 0xA = 0b1010 and for
> priority 1 to 0xB = 0b1011.
> - echo 0x11113232 > /sys/bus/amba/devices/<tgu-name>/step0_priority0/reg0
> - echo 0x11113233 > /sys/bus/amba/devices/<tgu-name>/step0_priority1/reg0
>
> Note:
> Bit distribution diagram for each priority register
> |-------------------------------------------------------------------|
> | Bits | Field Nam | Description |
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 29:28 | SEL_BIT7_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 25:24 | SEL_BIT6_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 21:20 | SEL_BIT5_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 17:16 | SEL_BIT4_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 13:12 | SEL_BIT3_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 9:8 | SEL_BIT2_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 5:4 | SEL_BIT1_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> | | | 00 = bypass for OR output |
> | 1:0 | SEL_BIT0_TYPE2 | 01 = bypass for AND output |
> | | | 10 = sense input '0' is true|
> | | | 11 = sense input '1' is true|
> |-------------------------------------------------------------------|
> These bits are used to identify the signals we want to sense, with
> a maximum signal number of 140. For example, to sense the signal
> 0xA (binary 1010), we set the value of bits 0 to 13 to 3232, which
> represents 1010. The remaining bits are set to 1, as we want to use
> AND gate to summarize all the signals we want to sense here. For
> rising or falling edge detection of any input to the priority, set
> the remaining bits to 0 to use an OR gate.
>
> 3. look for the pattern for priority_i i=0,1.
> - echo 0x3 > /sys/bus/amba/devices/<tgu-name>/step0_condition_decode/reg0
> - echo 0x30 > /sys/bus/amba/devices/<tgu-name>/step0_condition_decode/reg1
>
> |-------------------------------------------------------------------------------|
> | Bits | Field Nam | Description |
> |-------------------------------------------------------------------------------|
> | | |For each decoded condition, this |
> | 24 | NOT |inverts the output. If the condition |
> | | |decodes to true, and the NOT field |
> | | |is '1', then the output is NOT true. |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from the associated|
> | 21 | BC0_COMP_ACTIVE |comparator will be actively included in|
> | | |the decoding of this particular |
> | | |condition. |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from the associated|
> | | |comparator will need to be 1 to affect |
> | 20 | BC0_COMP_HIGH |the decoding of this condition. |
> | | |Conversely, a '0' here requires a '0' |
> | | |from the comparator |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from the associated|
> | 17 | |comparator will be actively included in|
> | | TC0_COMP_ACTIVE |the decoding of this particular |
> | | |condition. |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from the associated|
> | | |comparator will need to be 1 to affect |
> | 16 | TC0_COMP_HIGH |the decoding of this particular |
> | | |condition.Conversely, a 0 here |
> | | |requires a '0' from the comparator |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from Priority_n |
> | | |OR logic will be actively |
> | 4n+3 | Priority_n_OR_ACTIVE|included in the decoding of |
> | | (n=0,1,2,3) |this particular condition. |
> | | | |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from Priority_n |
> | | |will need to be '1' to affect the |
> | 4n+2 | Priority_n_OR_HIGH |decoding of this particular |
> | | (n=0,1,2,3) |condition. Conversely, a '0' here |
> | | |requires a '0' from Priority_n OR logic|
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from Priority_n |
> | | |AND logic will be actively |
> | 4n+1 |Priority_n_AND_ACTIVE|included in the decoding of this |
> | | (n=0,1,2,3) |particular condition. |
> | | | |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from Priority_n |
> | | |AND logic will need to be '1' to |
> | 4n | Priority_n_AND_HIGH |affect the decoding of this |
> | | (n=0,1,2,3) |particular condition. Conversely, |
> | | |a '0' here requires a '0' from |
> | | |Priority_n AND logic. |
> |-------------------------------------------------------------------------------|
> Since we use `priority_0` and `priority_1` with an AND output in step 2, we set `0x3`
> and `0x30` here to activate them.
>
> 4. Set NEXT_STEP = 1 and TC0_ENABLE = 1 so that when the conditions
> are met then the next step will be step 1 and the timer will be enabled.
> - echo 0x20008 > /sys/bus/amba/devices/<tgu-name>/step0_condition_select/reg0
> - echo 0x20008 > /sys/bus/amba/devices/<tgu-name>/step0_condition_select/reg1
>
> |-----------------------------------------------------------------------------|
> | Bits | Field Nam | Description |
> |-----------------------------------------------------------------------------|
> | | |This field defines the next step the |
> | 18:17 | NEXT_STEP |TGU will 'goto' for the associated |
> | | |Condition and Step. |
> |-----------------------------------------------------------------------------|
> | | |For each possible output trigger |
> | 13 | TRIGGER |available, set a '1' if you want |
> | | |the trigger to go active for the |
> | | |associated condition and Step. |
> |-----------------------------------------------------------------------------|
> | | |This will cause BC0 to increment if the|
> | 9 | BC0_INC |associated Condition is decoded for |
> | | |this step. |
> |-----------------------------------------------------------------------------|
> | | |This will cause BC0 to decrement if the|
> | 8 | BC0_DEC |associated Condition is decoded for |
> | | |this step. |
> |-----------------------------------------------------------------------------|
> | | |This will clear BC0 count value to 0 if|
> | 7 | BC0_CLEAR |the associated Condition is decoded |
> | | |for this step. |
> |-----------------------------------------------------------------------------|
> | | |This will cause TC0 to increment until |
> | 3 | TC0_ENABLE |paused or cleared if the associated |
> | | |Condition is decoded for this step. |
> |-----------------------------------------------------------------------------|
> | | |This will cause TC0 to pause until |
> | 2 | TC0_PAUSE |enabled if the associated Condition |
> | | |is decoded for this step. |
> |-----------------------------------------------------------------------------|
> | | |This will clear TC0 count value to 0 |
> | 1 | TC0_CLEAR |if the associated Condition is |
> | | |decoded for this step. |
> |-----------------------------------------------------------------------------|
> | | |This will set the done signal to the |
> | 0 | DONE |TGU FSM if the associated Condition |
> | | |is decoded for this step. |
> |-----------------------------------------------------------------------------|
> Based on the distribution diagram, we set `0x20008` for `priority0` and `priority1` to
> achieve "jump to step 1 and enable TC0" once the signal is sensed.
>
> 5. activate the timer comparison for this step.
> - echo 0x30000 > /sys/bus/amba/devices/<tgu-name>/step1_condition_decode/reg0
>
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from the associated|
> | 17 | |comparator will be actively included in|
> | | TC0_COMP_ACTIVE |the decoding of this particular |
> | | |condition. |
> |-------------------------------------------------------------------------------|
> | | |When '1' the output from the associated|
> | | |comparator will need to be 1 to affect |
> | 16 | TC0_COMP_HIGH |the decoding of this particular |
> | | |condition.Conversely, a 0 here |
> | | |requires a '0' from the comparator |
> |-------------------------------------------------------------------------------|
> Accroding to the decode distribution diagram , we give 0x30000 here to set 16th&17th bit
> to enable timer comparison.
>
> 6. Set the NEXT_STEP = 0 and TC0_PAUSE = 1 and TC0_CLEAR = 1 once the timer
> has reached the given value.
> - echo 0x6 > /sys/bus/amba/devices/<tgu-name>/step1_condition_select/reg0
>
> 7. Enable Trigger 0 for TGU when the condition 0 is met in step1,
> i.e. when the timer reaches 3.
> - echo 0x2000 > /sys/bus/amba/devices/<tgu-name>/step1_condition_select/default
>
> Note:
> 1. 'default' register allows for establishing the resultant action for
> the default condition
>
> 2. Trigger:For each possible output trigger available from
> the Design document, there are three triggers: interrupts, CTI,
> and Cross-TGU mapping.All three triggers can occur, but
> the choice of which trigger to use depends on the user's
> needs.
>
> 8. Compare the timer to 3 in step 1.
> - echo 0x3 > /sys/bus/amba/devices/<tgu-name>/step1_timer/reg0
>
> 9. enale tgu
> - echo 1 > /sys/bus/amba/devices/<tgu-name>/enable_tgu
> ---
> Link to V8: https://lore.kernel.org/all/20251203090055.2432719-1-songwei.chai@oss.qualcomm.com/
>
> Changes in V9:
> - Decoupled the tgu driver from coresight header file and registered it as an amba device.
> - Retained Rob's reviewed-by tag on patch1/7 since the file remains unchanged.
> - Updated the sysfs node path in the Documentation directory.
> ---
> Link to V7: https://lore.kernel.org/all/20251104064043.88972-1-songwei.chai@oss.qualcomm.com/
>
> Changes in V8:
> - Add "select" section in bindings.
> - Update publish date in "sysfs-bus-coresight-devices-tgu".
> ---
> Link to V6: https://lore.kernel.org/all/20250709104114.22240-1-songchai@qti.qualcomm.com/
>
> Changes in V7:
> - Move the TGU code location from 'drivers/hwtracing/coresight/' to 'drivers/hwtracing/qcom/'.
> - Rename the spinlock used in the code from 'spinlock' to 'lock'.
> - Perform the 'calculate_array_location' separately, instead of doing it within the function.
> - Update the sender email address.
> ---
> Link to V5: https://lore.kernel.org/all/20250529081949.26493-1-quic_songchai@quicinc.com/
>
> Changes in V6:
> - Replace spinlock with guard(spinlock) in tgu_enable.
> - Remove redundant blank line.
> - Update publish date and contact member's name in "sysfs-bus-coresight-devices-tgu".
> ---
> Link to V4: https://patchwork.kernel.org/project/linux-arm-msm/cover/20250423101054.954066-1-quic_songchai@quicinc.com/
>
> Changes in V5:
> - Update publish date and kernel_version in "sysfs-bus-coresight-devices-tgu"
> ---
> Link to V3: https://lore.kernel.org/all/20250227092640.2666894-1-quic_songchai@quicinc.com/
>
> Changes in V4:
> - Add changlog in coverletter.
> - Correct 'year' in Copyright in patch1.
> - Correct port mechansim description in patch1.
> - Remove 'tgu-steps','tgu-regs','tgu-conditions','tgu-timer-counters' from dt-binding
> and set them through reading DEVID register as per Mike's suggestion.
> - Modify tgu_disable func to make it have single return point in patch2 as per
> Mike's suggestion.
> - Use sysfs_emit in enable_tgu_show func in ptach2.
> - Remove redundant judgement in enable_tgu_store in patch2.
> - Correct typo in description in patch3.
> - Set default ret as SYSFS_GROUP_INVISIBLE, and returnret at end in pacth3 as
> per Mike's suggestion.
> - Remove tgu_dataset_ro definition in patch3
> - Use #define constants with explanations of what they are rather than
> arbitrary magic numbers in patch3 and patch4.
> - Check -EINVAL before using 'calculate_array_location()' in array in patch4.
> - Add 'default' in 'tgu_dataset_show''s switch part in patch4.
> - Document the value needed to initiate the reset in pacth7.
> - Check "value" in 'reset_tgu_store' and bail out with an error code if 0 in patch7.
> - Remove dev_dbg in 'reset_tgu_store' in patch7.
> ---
> Link to V2: https://lore.kernel.org/all/20241010073917.16023-1-quic_songchai@quicinc.com/
>
> Changes in V3:
> - Correct typo and format in dt-binding in patch1
> - Rebase to the latest kernel version
> ---
> Link to V1: https://lore.kernel.org/all/20240830092311.14400-1-quic_songchai@quicinc.com/
>
> Changes in V2:
> - Use real name instead of login name,
> - Correct typo and format in dt-binding and code.
> - Bring order in tgu_prob(declarations with and without assignments) as per
> Krzysztof's suggestion.
> - Add module device table in patch2.
> - Set const for tgu_common_grp and tgu_ids in patch2.
> - Initialize 'data' in tgu_ids to fix the warning in pacth2.
> ---
>
> Songwei Chai (7):
> dt-bindings: arm: Add support for Qualcomm TGU trace
> qcom-tgu: Add TGU driver
> qcom-tgu: Add signal priority support
> qcom-tgu: Add TGU decode support
> qcom-tgu: Add support to configure next action
> qcom-tgu: Add timer/counter functionality for TGU
> qcom-tgu: Add reset node to initialize
>
> .../ABI/testing/sysfs-bus-amba-devices-tgu | 51 ++
> .../devicetree/bindings/arm/qcom,tgu.yaml | 92 +++
> drivers/Makefile | 1 +
> drivers/hwtracing/Kconfig | 2 +
> drivers/hwtracing/qcom/Kconfig | 18 +
> drivers/hwtracing/qcom/Makefile | 3 +
> drivers/hwtracing/qcom/tgu.c | 702 ++++++++++++++++++
> drivers/hwtracing/qcom/tgu.h | 272 +++++++
> 8 files changed, 1141 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> create mode 100644 Documentation/devicetree/bindings/arm/qcom,tgu.yaml
> create mode 100644 drivers/hwtracing/qcom/Kconfig
> create mode 100644 drivers/hwtracing/qcom/Makefile
> create mode 100644 drivers/hwtracing/qcom/tgu.c
> create mode 100644 drivers/hwtracing/qcom/tgu.h
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 2/7] qcom-tgu: Add TGU driver
2025-12-19 6:58 ` [PATCH v9 2/7] qcom-tgu: Add TGU driver Songwei Chai
@ 2025-12-25 2:44 ` Jie Gan
2026-01-06 7:01 ` Songwei Chai
0 siblings, 1 reply; 19+ messages in thread
From: Jie Gan @ 2025-12-25 2:44 UTC (permalink / raw)
To: Songwei Chai, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 12/19/2025 2:58 PM, Songwei Chai wrote:
> Add driver to support device TGU (Trigger Generation Unit).
> TGU is a Data Engine which can be utilized to sense a plurality of
> signals and create a trigger into the CTI or generate interrupts to
> processors. Add probe/enable/disable functions for tgu.
>
> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
> ---
> .../ABI/testing/sysfs-bus-amba-devices-tgu | 9 +
> drivers/Makefile | 1 +
> drivers/hwtracing/Kconfig | 2 +
> drivers/hwtracing/qcom/Kconfig | 18 ++
> drivers/hwtracing/qcom/Makefile | 3 +
> drivers/hwtracing/qcom/tgu.c | 178 ++++++++++++++++++
> drivers/hwtracing/qcom/tgu.h | 51 +++++
> 7 files changed, 262 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> create mode 100644 drivers/hwtracing/qcom/Kconfig
> create mode 100644 drivers/hwtracing/qcom/Makefile
> create mode 100644 drivers/hwtracing/qcom/tgu.c
> create mode 100644 drivers/hwtracing/qcom/tgu.h
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> new file mode 100644
> index 000000000000..24dcdf1d70cc
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> @@ -0,0 +1,9 @@
> +What: /sys/bus/amba/devices/<tgu-name>/enable_tgu
> +Date: December 2025
> +KernelVersion 6.19
> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
> +Description:
> + (RW) Set/Get the enable/disable status of TGU
> + Accepts only one of the 2 values - 0 or 1.
> + 0 : disable TGU.
> + 1 : enable TGU.
> diff --git a/drivers/Makefile b/drivers/Makefile
> index ccc05f1eae3e..9608a3debb1f 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -177,6 +177,7 @@ obj-$(CONFIG_RAS) += ras/
> obj-$(CONFIG_USB4) += thunderbolt/
> obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
> obj-y += hwtracing/intel_th/
> +obj-y += hwtracing/qcom/
> obj-$(CONFIG_STM) += hwtracing/stm/
> obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/
> obj-y += android/
> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
> index 911ee977103c..8a640218eed8 100644
> --- a/drivers/hwtracing/Kconfig
> +++ b/drivers/hwtracing/Kconfig
> @@ -7,4 +7,6 @@ source "drivers/hwtracing/intel_th/Kconfig"
>
> source "drivers/hwtracing/ptt/Kconfig"
>
> +source "drivers/hwtracing/qcom/Kconfig"
> +
> endmenu
> diff --git a/drivers/hwtracing/qcom/Kconfig b/drivers/hwtracing/qcom/Kconfig
> new file mode 100644
> index 000000000000..d6f6d4b0f28e
> --- /dev/null
> +++ b/drivers/hwtracing/qcom/Kconfig
> @@ -0,0 +1,18 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# QCOM specific hwtracing drivers
> +#
> +menu "Qualcomm specific hwtracing drivers"
> +
> +config QCOM_TGU
> + tristate "QCOM Trigger Generation Unit driver"
TGU is working as the helper device of the TPDM, can we say:
select CORESIGHT_TPDM
> + help
> + This driver provides support for Trigger Generation Unit that is
> + used to detect patterns or sequences on a given set of signals.
> + TGU is used to monitor a particular bus within a given region to
> + detect illegal transaction sequences or slave responses. It is also
> + used to monitor a data stream to detect protocol violations and to
> + provide a trigger point for centering data around a specific event
> + within the trace data buffer.
> +
> +endmenu
> diff --git a/drivers/hwtracing/qcom/Makefile b/drivers/hwtracing/qcom/Makefile
> new file mode 100644
> index 000000000000..5a0a868c1ea0
> --- /dev/null
> +++ b/drivers/hwtracing/qcom/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_QCOM_TGU) += tgu.o
> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
> new file mode 100644
> index 000000000000..dbd1acbd2fa5
> --- /dev/null
> +++ b/drivers/hwtracing/qcom/tgu.c
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
Please update the copyright.
Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
same for other new created files.
> + */
> +
> +#include <linux/amba/bus.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "tgu.h"
> +
> +static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
> +{
> + TGU_UNLOCK(drvdata->base);
> + /* Enable TGU to program the triggers */
> + writel(1, drvdata->base + TGU_CONTROL);
> + TGU_LOCK(drvdata->base);
> +}
> +
> +static int tgu_enable(struct device *dev)
> +{
> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> +
> + guard(spinlock)(&drvdata->lock);
> + if (drvdata->enable)
> + return -EBUSY;
> +
> + tgu_write_all_hw_regs(drvdata);
> + drvdata->enable = true;
> +
> + return 0;
> +}
> +
> +static int tgu_disable(struct device *dev)
void is better as the return value always 0?
> +{
> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> +
> + guard(spinlock)(&drvdata->lock);
> + if (drvdata->enable) {
> + TGU_UNLOCK(drvdata->base);
> + writel(0, drvdata->base + TGU_CONTROL);
> + TGU_LOCK(drvdata->base);
> +
> + drvdata->enable = false;
> + }
> + return 0;
> +}
> +
> +static ssize_t enable_tgu_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + bool enabled;
> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> +
> + guard(spinlock)(&drvdata->lock);
> + enabled = drvdata->enable;
> +
> + return sysfs_emit(buf, "%d\n", enabled);
Remove enabled with below:
return sysfs_emit(buf, "%d\n", (int)drvdata->enable);
It may suffer a warning during compile without cast?
> +}
> +
> +/* enable_tgu_store - Configure Trace and Gating Unit (TGU) triggers. */
> +static ssize_t enable_tgu_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t size)
> +{
> + int ret = 0;
> + unsigned long val;
Prefer inverse christmas tree order
> +
> + ret = kstrtoul(buf, 0, &val);
> + if (ret)
> + return ret;
if (kstrtoul(buf, 0, &val)
return -EINVAL;
> +
> + if (val) {
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret)
> + return ret;
> + ret = tgu_enable(dev);
> + if (ret)
> + pm_runtime_put(dev);
if (ret) {
pm_runtime_put(dev);
return ret;
}
> + } else {
> + ret = tgu_disable(dev);
the return value here is 0, we can just ignore it, see previous comment.
> + pm_runtime_put(dev);
> + }
> +
> + if (ret)
> + return ret;
Remove if here.
> + return size;
> +}
> +static DEVICE_ATTR_RW(enable_tgu);
> +
> +static struct attribute *tgu_common_attrs[] = {
> + &dev_attr_enable_tgu.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group tgu_common_grp = {
> + .attrs = tgu_common_attrs,
> + NULL,
> +};
> +
> +static const struct attribute_group *tgu_attr_groups[] = {
> + &tgu_common_grp,
> + NULL,
> +};
> +
> +static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
> +{
> + struct device *dev = &adev->dev;
> + struct tgu_drvdata *drvdata;
> + int ret;
> +
> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + drvdata->dev = &adev->dev;
> + dev_set_drvdata(dev, drvdata);
> +
> + drvdata->base = devm_ioremap_resource(dev, &adev->res);
> + if (IS_ERR(drvdata->base))
> + return PTR_ERR(drvdata->base);
> +
> + spin_lock_init(&drvdata->lock);
> +
> + ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
> + if (ret) {
> + dev_err(dev, "failed to create sysfs groups: %d\n", ret);
> + return ret;
> + }
> +
> + drvdata->enable = false;
default false, no need.
> +
> + pm_runtime_put(&adev->dev);
> + return 0;
> +}
> +
> +static void tgu_remove(struct amba_device *adev)
> +{
> + struct device *dev = &adev->dev;
> +
> + sysfs_remove_groups(&dev->kobj, tgu_attr_groups);
> +
> + tgu_disable(dev);
> + dev_set_drvdata(dev, NULL);
no need. remove will release the allocated memory.
> +}
> +
> +static const struct amba_id tgu_ids[] = {
> + {
> + .id = 0x000f0e00,
> + .mask = 0x000fffff,
> + },
> + { 0, 0, NULL },
> +};
> +
> +MODULE_DEVICE_TABLE(amba, tgu_ids);
> +
> +static struct amba_driver tgu_driver = {
> + .drv = {
> + .name = "qcom-tgu",
> + .suppress_bind_attrs = true,
> + },
> + .probe = tgu_probe,
> + .remove = tgu_remove,
> + .id_table = tgu_ids,
> +};
> +
> +module_amba_driver(tgu_driver);
> +
> +MODULE_AUTHOR("Songwei Chai <songwei.chai@oss.qualcomm.com>");
> +MODULE_AUTHOR("Jinlong Mao <jinlong.mao@oss.qualcomm.com>");
> +MODULE_DESCRIPTION("Qualcomm Trigger Generation Unit driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
> new file mode 100644
> index 000000000000..abc732f91dfc
> --- /dev/null
> +++ b/drivers/hwtracing/qcom/tgu.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
Please update the copyright.
Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +#ifndef _QCOM_TGU_H
> +#define _QCOM_TGU_H
> +
> +/* Register addresses */
> +#define TGU_CONTROL 0x0000
#define TGU_CONTROL 0
Thanks,
Jie
> +#define TGU_LAR 0xfb0
> +#define TGU_UNLOCK_OFFSET 0xc5acce55
> +
> +static inline void TGU_LOCK(void __iomem *addr)
> +{
> + do {
> + /* Wait for things to settle */
> + mb();
> + writel_relaxed(0x0, addr + TGU_LAR);
> + } while (0);
> +}
> +
> +static inline void TGU_UNLOCK(void __iomem *addr)
> +{
> + do {
> + writel_relaxed(TGU_UNLOCK_OFFSET, addr + TGU_LAR);
> + /* Make sure everyone has seen this */
> + mb();
> + } while (0);
> +}
> +
> +/**
> + * struct tgu_drvdata - Data structure for a TGU (Trigger Generator Unit)
> + * @base: Memory-mapped base address of the TGU device
> + * @dev: Pointer to the associated device structure
> + * @lock: Spinlock for handling concurrent access
> + * @enable: Flag indicating whether the TGU device is enabled
> + *
> + * This structure defines the data associated with a TGU device,
> + * including its base address, device pointers, clock, spinlock for
> + * synchronization, trigger data pointers, maximum limits for various
> + * trigger-related parameters, and enable status.
> + */
> +struct tgu_drvdata {
> + void __iomem *base;
> + struct device *dev;
> + spinlock_t lock;
> + bool enable;
> +};
> +
> +#endif
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace
2025-12-19 6:58 ` [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace Songwei Chai
@ 2025-12-25 2:57 ` Jie Gan
2025-12-25 6:28 ` Jie Gan
1 sibling, 0 replies; 19+ messages in thread
From: Jie Gan @ 2025-12-25 2:57 UTC (permalink / raw)
To: Songwei Chai, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh, Rob Herring
On 12/19/2025 2:58 PM, Songwei Chai wrote:
> The Trigger Generation Unit (TGU) is designed to detect patterns or
> sequences within a specific region of the System on Chip (SoC). Once
> configured and activated, it monitors sense inputs and can detect a
> pre-programmed state or sequence across clock cycles, subsequently
> producing a trigger.
>
> TGU configuration space
> offset table
> x-------------------------x
> | |
> | |
> | | Step configuration
> | | space layout
> | coresight management | x-------------x
> | registers | |---> | |
> | | | | reserve |
> | | | | |
> |-------------------------| | |-------------|
> | | | | priority[3] |
> | step[7] |<-- | |-------------|
> |-------------------------| | | | priority[2] |
> | | | | |-------------|
> | ... | |Steps region | | priority[1] |
> | | | | |-------------|
> |-------------------------| | | | priority[0] |
> | |<-- | |-------------|
> | step[0] |--------------------> | |
> |-------------------------| | condition |
> | | | |
> | control and status | x-------------x
> | space | | |
> x-------------------------x |Timer/Counter|
> | |
> x-------------x
> TGU Configuration in Hardware
>
> The TGU provides a step region for user configuration, similar
> to a flow chart. Each step region consists of three register clusters:
>
> 1.Priority Region: Sets the required signals with priority.
> 2.Condition Region: Defines specific requirements (e.g., signal A
> reaches three times) and the subsequent action once the requirement is
> met.
> 3.Timer/Counter (Optional): Provides timing or counting functionality.
>
> Add a new tgu.yaml file to describe the bindings required to
> define the TGU in the device trees.
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
> ---
> .../devicetree/bindings/arm/qcom,tgu.yaml | 92 +++++++++++++++++++
> 1 file changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/qcom,tgu.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom,tgu.yaml b/Documentation/devicetree/bindings/arm/qcom,tgu.yaml
> new file mode 100644
> index 000000000000..5b6a58ebe691
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/qcom,tgu.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +# Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
Thanks,
Jie
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/qcom,tgu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Trigger Generation Unit - TGU
> +
> +description: |
> + The Trigger Generation Unit (TGU) is a Data Engine which can be utilized
> + to sense a plurality of signals and create a trigger into the CTI or
> + generate interrupts to processors. The TGU is like the trigger circuit
> + of a Logic Analyzer. The corresponding trigger logic can be realized by
> + configuring the conditions for each step after sensing the signal.
> + Once setup and enabled, it will observe sense inputs and based upon
> + the activity of those inputs, even over clock cycles, may detect a
> + preprogrammed state/sequence and then produce a trigger or interrupt.
> +
> + The primary use case of the TGU is to detect patterns or sequences on a
> + given set of signals within some region to identify the issue in time
> + once there is abnormal behavior in the subsystem.
> +
> +maintainers:
> + - Mao Jinlong <jinlong.mao@oss.qualcomm.com>
> + - Songwei Chai <songwei.chai@oss.qualcomm.com>
> +
> +# Need a custom select here or 'arm,primecell' will match on lots of nodes
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,tgu
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,tgu
> + - const: arm,primecell
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: apb_pclk
> +
> + in-ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + additionalProperties: false
> +
> + properties:
> + port:
> + description:
> + The port mechanism here ensures the relationship between TGU and
> + TPDM, as TPDM is one of the inputs for TGU. It will allow TGU to
> + function as TPDM's helper and enable TGU when the connected
> + TPDM is enabled.
> + $ref: /schemas/graph.yaml#/properties/port
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + tgu@10b0e000 {
> + compatible = "qcom,tgu", "arm,primecell";
> + reg = <0x10b0e000 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + in-ports {
> + port {
> + tgu_in_tpdm_swao: endpoint{
> + remote-endpoint = <&tpdm_swao_out_tgu>;
> + };
> + };
> + };
> + };
> +...
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 3/7] qcom-tgu: Add signal priority support
2025-12-19 6:58 ` [PATCH v9 3/7] qcom-tgu: Add signal priority support Songwei Chai
@ 2025-12-25 3:20 ` Jie Gan
2026-01-06 7:20 ` Songwei Chai
0 siblings, 1 reply; 19+ messages in thread
From: Jie Gan @ 2025-12-25 3:20 UTC (permalink / raw)
To: Songwei Chai, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 12/19/2025 2:58 PM, Songwei Chai wrote:
> Like circuit of a Logic analyzer, in TGU, the requirement could be
> configured in each step and the trigger will be created once the
> requirements are met. Add priority functionality here to sort the
> signals into different priorities. The signal which is wanted could
> be configured in each step's priority node, the larger number means
> the higher priority and the signal with higher priority will be sensed
> more preferentially.
>
> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
> ---
> .../ABI/testing/sysfs-bus-amba-devices-tgu | 7 +
> drivers/hwtracing/qcom/tgu.c | 156 ++++++++++++++++++
> drivers/hwtracing/qcom/tgu.h | 113 +++++++++++++
> 3 files changed, 276 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> index 24dcdf1d70cc..d04a01368089 100644
> --- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> @@ -7,3 +7,10 @@ Description:
> Accepts only one of the 2 values - 0 or 1.
> 0 : disable TGU.
> 1 : enable TGU.
> +
> +What: /sys/bus/amba/devices/<tgu-name>/step[0:7]_priority[0:3]/reg[0:17]
> +Date: December 2025
> +KernelVersion 6.19
> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
> +Description:
> + (RW) Set/Get the sensed signal with specific step and priority for TGU.
> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
> index dbd1acbd2fa5..447d7e68d132 100644
> --- a/drivers/hwtracing/qcom/tgu.c
> +++ b/drivers/hwtracing/qcom/tgu.c
> @@ -14,14 +14,121 @@
>
> #include "tgu.h"
>
> +static int calculate_array_location(struct tgu_drvdata *drvdata,
> + int step_index, int operation_index,
> + int reg_index)
> +{
> + return operation_index * (drvdata->max_step) * (drvdata->max_reg) +
> + step_index * (drvdata->max_reg) + reg_index;
> +}
> +
> +static ssize_t tgu_dataset_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int index;
Prefer reverse Christmas tree order
> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> + struct tgu_attribute *tgu_attr =
> + container_of(attr, struct tgu_attribute, attr);
> +
> + index = calculate_array_location(drvdata, tgu_attr->step_index,
> + tgu_attr->operation_index,
> + tgu_attr->reg_num);
> +
> + return sysfs_emit(buf, "0x%x\n",
> + drvdata->value_table->priority[index]);
> +}
> +
> +static ssize_t tgu_dataset_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + int index;
> + unsigned long val;
Prefer reverse Christmas tree order
> +
> + struct tgu_drvdata *tgu_drvdata = dev_get_drvdata(dev);
> + struct tgu_attribute *tgu_attr =
> + container_of(attr, struct tgu_attribute, attr);
> +
> + if (kstrtoul(buf, 0, &val))
> + return -EINVAL;
> +
> + guard(spinlock)(&tgu_drvdata->lock);
> + index = calculate_array_location(tgu_drvdata, tgu_attr->step_index,
> + tgu_attr->operation_index,
> + tgu_attr->reg_num);
> +
> + tgu_drvdata->value_table->priority[index] = val;
> + return size;
> +}
> +
> +static umode_t tgu_node_visible(struct kobject *kobject,
> + struct attribute *attr,
> + int n)
> +{
> + struct device *dev = kobj_to_dev(kobject);
> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> + int ret = SYSFS_GROUP_INVISIBLE;
> +
> + struct device_attribute *dev_attr =
> + container_of(attr, struct device_attribute, attr);
> + struct tgu_attribute *tgu_attr =
> + container_of(dev_attr, struct tgu_attribute, attr);
> +
> + if (tgu_attr->step_index < drvdata->max_step) {
> + ret = (tgu_attr->reg_num < drvdata->max_reg) ?
> + attr->mode : 0;
> + }
> + return ret;
if ((tgu_attr->step_index < drvdata->max_step) &&
(tgu_attr->reg_num < drvdata->max_reg)
return attr->mode;
return 0;
> +}
> +
> static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
> {
> + int i, j, k, index;
> +
> TGU_UNLOCK(drvdata->base);
> + for (i = 0; i < drvdata->max_step; i++) {
> + for (j = 0; j < MAX_PRIORITY; j++) {
> + for (k = 0; k < drvdata->max_reg; k++) {
> + index = calculate_array_location(
> + drvdata, i, j, k);
> +
> + writel(drvdata->value_table->priority[index],
> + drvdata->base +
> + PRIORITY_REG_STEP(i, j, k));
> + }
> + }
> + }
> /* Enable TGU to program the triggers */
> writel(1, drvdata->base + TGU_CONTROL);
> TGU_LOCK(drvdata->base);
> }
>
> +static void tgu_set_reg_number(struct tgu_drvdata *drvdata)
> +{
> + int num_sense_input;
> + int num_reg;
> + u32 devid;
> +
> + devid = readl(drvdata->base + TGU_DEVID);
> +
> + num_sense_input = TGU_DEVID_SENSE_INPUT(devid);
> + if (((num_sense_input * NUMBER_BITS_EACH_SIGNAL) % LENGTH_REGISTER) == 0)
> + num_reg = (num_sense_input * NUMBER_BITS_EACH_SIGNAL) / LENGTH_REGISTER;
> + else
> + num_reg = ((num_sense_input * NUMBER_BITS_EACH_SIGNAL) / LENGTH_REGISTER) + 1;
> + drvdata->max_reg = num_reg;
> +
> +}
> +
> +static void tgu_set_steps(struct tgu_drvdata *drvdata)
> +{
> + u32 devid;
> +
> + devid = readl(drvdata->base + TGU_DEVID);
> +
> + drvdata->max_step = TGU_DEVID_STEPS(devid);
> +}
> +
> static int tgu_enable(struct device *dev)
> {
> struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> @@ -106,6 +213,38 @@ static const struct attribute_group tgu_common_grp = {
>
> static const struct attribute_group *tgu_attr_groups[] = {
> &tgu_common_grp,
> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 3),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 0),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 1),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 2),
> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 3),
> NULL,
> };
>
> @@ -128,12 +267,29 @@ static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
>
> spin_lock_init(&drvdata->lock);
>
> + tgu_set_reg_number(drvdata);
> + tgu_set_steps(drvdata);
> +
> ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
> if (ret) {
> dev_err(dev, "failed to create sysfs groups: %d\n", ret);
> return ret;
> }
>
> + drvdata->value_table =
> + devm_kzalloc(dev, sizeof(*drvdata->value_table), GFP_KERNEL);
> + if (!drvdata->value_table)
> + return -ENOMEM;
> +
> + drvdata->value_table->priority = devm_kzalloc(
> + dev,
> + MAX_PRIORITY * drvdata->max_reg * drvdata->max_step *
> + sizeof(*(drvdata->value_table->priority)),
> + GFP_KERNEL);
can we declare a pri_size for better reading?
size_t pri_size;
unsigned int *priority
pri_size = MAX_PRIORITY * drvdata->max_reg * drvdata->max_step *
sizeof(*(drvdata->value_table->priority));
priority = devm_kzalloc(dev, pri_size, GFP_KERNEL)
if (!priority)
return -ENOMEM;
drvdata->value_table->priority = priority;
> +
> + if (!drvdata->value_table->priority)
> + return -ENOMEM;
> +
> drvdata->enable = false;
>
> pm_runtime_put(&adev->dev);
> diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
> index abc732f91dfc..2cf95c239ee7 100644
> --- a/drivers/hwtracing/qcom/tgu.h
> +++ b/drivers/hwtracing/qcom/tgu.h
> @@ -10,6 +10,113 @@
> #define TGU_CONTROL 0x0000
> #define TGU_LAR 0xfb0
> #define TGU_UNLOCK_OFFSET 0xc5acce55
> +#define TGU_DEVID 0xfc8
> +
> +#define BMVAL(val, lsb, msb) ((val & GENMASK(msb, lsb)) >> lsb)
> +#define TGU_DEVID_SENSE_INPUT(devid_val) ((int) BMVAL(devid_val, 10, 17))
> +#define TGU_DEVID_STEPS(devid_val) ((int)BMVAL(devid_val, 3, 6))
> +#define NUMBER_BITS_EACH_SIGNAL 4
> +#define LENGTH_REGISTER 32
> +
> +/*
> + * TGU configuration space Step configuration
> + * offset table space layout
> + * x-------------------------x$ x-------------x$
> + * | |$ | |$
> + * | | | reserve |$
> + * | | | |$
> + * |coresight management | |-------------|base+n*0x1D8+0x1F4$
> + * | registe | |---> |prioroty[3] |$
> + * | | | |-------------|base+n*0x1D8+0x194$
> + * | | | |prioroty[2] |$
> + * |-------------------------| | |-------------|base+n*0x1D8+0x134$
> + * | | | |prioroty[1] |$
> + * | step[7] | | |-------------|base+n*0x1D8+0xD4$
> + * |-------------------------|->base+0x40+7*0x1D8 | |prioroty[0] |$
> + * | | | |-------------|base+n*0x1D8+0x74$
> + * | ... | | | condition |$
> + * | | | | select |$
> + * |-------------------------|->base+0x40+1*0x1D8 | |-------------|base+n*0x1D8+0x60$
> + * | | | | condition |$
> + * | step[0] |--------------------> | decode |$
> + * |-------------------------|-> base+0x40 |-------------|base+n*0x1D8+0x50$
> + * | | | |$
> + * | Control and status space| |Timer/Counter|$
> + * | space | | |$
> + * x-------------------------x->base x-------------x base+n*0x1D8+0x40$
> + *
> + */
> +#define STEP_OFFSET 0x1D8
> +#define PRIORITY_START_OFFSET 0x0074
> +#define PRIORITY_OFFSET 0x60
> +#define REG_OFFSET 0x4
> +
> +/* Calculate compare step addresses */
> +#define PRIORITY_REG_STEP(step, priority, reg)\
> + (PRIORITY_START_OFFSET + PRIORITY_OFFSET * priority +\
> + REG_OFFSET * reg + STEP_OFFSET * step)
> +
> +#define tgu_dataset_rw(name, step_index, type, reg_num) \
> + (&((struct tgu_attribute[]){ { \
> + __ATTR(name, 0644, tgu_dataset_show, tgu_dataset_store), \
> + step_index, \
> + type, \
> + reg_num, \
> + } })[0].attr.attr)
> +
> +#define STEP_PRIORITY(step_index, reg_num, priority) \
> + tgu_dataset_rw(reg##reg_num, step_index, TGU_PRIORITY##priority, \
> + reg_num)
> +
> +#define STEP_PRIORITY_LIST(step_index, priority) \
> + {STEP_PRIORITY(step_index, 0, priority), \
> + STEP_PRIORITY(step_index, 1, priority), \
> + STEP_PRIORITY(step_index, 2, priority), \
> + STEP_PRIORITY(step_index, 3, priority), \
> + STEP_PRIORITY(step_index, 4, priority), \
> + STEP_PRIORITY(step_index, 5, priority), \
> + STEP_PRIORITY(step_index, 6, priority), \
> + STEP_PRIORITY(step_index, 7, priority), \
> + STEP_PRIORITY(step_index, 8, priority), \
> + STEP_PRIORITY(step_index, 9, priority), \
> + STEP_PRIORITY(step_index, 10, priority), \
> + STEP_PRIORITY(step_index, 11, priority), \
> + STEP_PRIORITY(step_index, 12, priority), \
> + STEP_PRIORITY(step_index, 13, priority), \
> + STEP_PRIORITY(step_index, 14, priority), \
> + STEP_PRIORITY(step_index, 15, priority), \
> + STEP_PRIORITY(step_index, 16, priority), \
> + STEP_PRIORITY(step_index, 17, priority), \
> + NULL \
> + }
> +
> +#define PRIORITY_ATTRIBUTE_GROUP_INIT(step, priority)\
> + (&(const struct attribute_group){\
> + .attrs = (struct attribute*[])STEP_PRIORITY_LIST(step, priority),\
> + .is_visible = tgu_node_visible,\
> + .name = "step" #step "_priority" #priority \
> + })
> +
> +enum operation_index {
> + TGU_PRIORITY0,
> + TGU_PRIORITY1,
> + TGU_PRIORITY2,
> + TGU_PRIORITY3,
> +};
> +
> +/* Maximum priority that TGU supports */
> +#define MAX_PRIORITY 4
> +
> +struct tgu_attribute {
> + struct device_attribute attr;
> + u32 step_index;
> + enum operation_index operation_index;
> + u32 reg_num;
> +};
> +
> +struct value_table {
> + unsigned int *priority;
priority here is an array? can we declare it as unsigned int array to
limit the allocated memory?
With the declared array, we can avoid one more memory allocation.
priority[index] that is used in code looks like a trick.
> +};
only has one member, better integrate with tgu_drvdata with proper nameing.
Thanks,
Jie
>
> static inline void TGU_LOCK(void __iomem *addr)
> {
> @@ -35,6 +142,9 @@ static inline void TGU_UNLOCK(void __iomem *addr)
> * @dev: Pointer to the associated device structure
> * @lock: Spinlock for handling concurrent access
> * @enable: Flag indicating whether the TGU device is enabled
> + * @value_table: Store given value based on relevant parameters.
> + * @max_reg: Maximum number of registers
> + * @max_step: Maximum step size
> *
> * This structure defines the data associated with a TGU device,
> * including its base address, device pointers, clock, spinlock for
> @@ -46,6 +156,9 @@ struct tgu_drvdata {
> struct device *dev;
> spinlock_t lock;
> bool enable;
> + struct value_table *value_table;
> + int max_reg;
> + int max_step;
> };
>
> #endif
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 7/7] qcom-tgu: Add reset node to initialize
2025-12-19 6:59 ` [PATCH v9 7/7] qcom-tgu: Add reset node to initialize Songwei Chai
@ 2025-12-25 5:56 ` Jie Gan
2026-01-06 7:22 ` Songwei Chai
2026-01-06 10:16 ` Suzuki K Poulose
1 sibling, 1 reply; 19+ messages in thread
From: Jie Gan @ 2025-12-25 5:56 UTC (permalink / raw)
To: Songwei Chai, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 12/19/2025 2:59 PM, Songwei Chai wrote:
> Add reset node to initialize the value of
> priority/condition_decode/condition_select/timer/counter nodes.
>
> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
> ---
> .../ABI/testing/sysfs-bus-amba-devices-tgu | 7 ++
> drivers/hwtracing/qcom/tgu.c | 74 +++++++++++++++++++
> 2 files changed, 81 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> index 010eade0a1c5..0733b3e07b45 100644
> --- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> @@ -42,3 +42,10 @@ KernelVersion 6.19
> Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
> Description:
> (RW) Set/Get the counter value with specific step for TGU.
> +
> +What: /sys/bus/amba/devices/<tgu-name>/reset_tgu
> +Date: December 2025
> +KernelVersion 6.19
> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
> +Description:
> + (Write) Write 1 to reset the dataset for TGU.
> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
> index d4210869556e..5a8c6af9b719 100644
> --- a/drivers/hwtracing/qcom/tgu.c
> +++ b/drivers/hwtracing/qcom/tgu.c
> @@ -425,8 +425,82 @@ static ssize_t enable_tgu_store(struct device *dev,
> }
> static DEVICE_ATTR_RW(enable_tgu);
>
> +/* reset_tgu_store - Reset Trace and Gating Unit (TGU) configuration. */
> +static ssize_t reset_tgu_store(struct device *dev,
> + struct device_attribute *attr, const char *buf,
> + size_t size)
> +{
> + unsigned long value;
> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
> + int i, j, ret;
> +
> + if (kstrtoul(buf, 0, &value) || value == 0)
> + return -EINVAL;
> +
> + if (!drvdata->enable) {
> + ret = pm_runtime_get_sync(drvdata->dev);
> + if (ret < 0) {
> + pm_runtime_put(drvdata->dev);
> + return ret;
> + }
> + }
> +
> + guard(spinlock)(&drvdata->lock);
> + TGU_UNLOCK(drvdata->base);
> +
> + writel(0, drvdata->base + TGU_CONTROL);
Better move TGU_LOCK(drvdata->base) here
Thanks,
Jie
> +
> + if (drvdata->value_table->priority)
> + memset(drvdata->value_table->priority, 0,
> + MAX_PRIORITY * drvdata->max_step *
> + drvdata->max_reg * sizeof(unsigned int));
> +
> + if (drvdata->value_table->condition_decode)
> + memset(drvdata->value_table->condition_decode, 0,
> + drvdata->max_condition_decode * drvdata->max_step *
> + sizeof(unsigned int));
> +
> + /* Initialize all condition registers to NOT(value=0x1000000) */
> + for (i = 0; i < drvdata->max_step; i++) {
> + for (j = 0; j < drvdata->max_condition_decode; j++) {
> + drvdata->value_table
> + ->condition_decode[calculate_array_location(
> + drvdata, i, TGU_CONDITION_DECODE, j)] =
> + 0x1000000;
> + }
> + }
> +
> + if (drvdata->value_table->condition_select)
> + memset(drvdata->value_table->condition_select, 0,
> + drvdata->max_condition_select * drvdata->max_step *
> + sizeof(unsigned int));
> +
> + if (drvdata->value_table->timer)
> + memset(drvdata->value_table->timer, 0,
> + (drvdata->max_step) *
> + (drvdata->max_timer) *
> + sizeof(unsigned int));
> +
> + if (drvdata->value_table->counter)
> + memset(drvdata->value_table->counter, 0,
> + (drvdata->max_step) *
> + (drvdata->max_counter) *
> + sizeof(unsigned int));
> +
> + dev_dbg(dev, "Coresight-TGU reset complete\n");
> +
> + TGU_LOCK(drvdata->base);
> +
> + drvdata->enable = false;
> + pm_runtime_put(drvdata->dev);
> +
> + return size;
> +}
> +static DEVICE_ATTR_WO(reset_tgu);
> +
> static struct attribute *tgu_common_attrs[] = {
> &dev_attr_enable_tgu.attr,
> + &dev_attr_reset_tgu.attr,
> NULL,
> };
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace
2025-12-19 6:58 ` [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace Songwei Chai
2025-12-25 2:57 ` Jie Gan
@ 2025-12-25 6:28 ` Jie Gan
1 sibling, 0 replies; 19+ messages in thread
From: Jie Gan @ 2025-12-25 6:28 UTC (permalink / raw)
To: Songwei Chai, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh, Rob Herring
On 12/19/2025 2:58 PM, Songwei Chai wrote:
> The Trigger Generation Unit (TGU) is designed to detect patterns or
> sequences within a specific region of the System on Chip (SoC). Once
> configured and activated, it monitors sense inputs and can detect a
> pre-programmed state or sequence across clock cycles, subsequently
> producing a trigger.
>
> TGU configuration space
> offset table
> x-------------------------x
> | |
> | |
> | | Step configuration
> | | space layout
> | coresight management | x-------------x
> | registers | |---> | |
> | | | | reserve |
> | | | | |
> |-------------------------| | |-------------|
> | | | | priority[3] |
> | step[7] |<-- | |-------------|
> |-------------------------| | | | priority[2] |
> | | | | |-------------|
> | ... | |Steps region | | priority[1] |
> | | | | |-------------|
> |-------------------------| | | | priority[0] |
> | |<-- | |-------------|
> | step[0] |--------------------> | |
> |-------------------------| | condition |
> | | | |
> | control and status | x-------------x
> | space | | |
> x-------------------------x |Timer/Counter|
> | |
> x-------------x
> TGU Configuration in Hardware
>
> The TGU provides a step region for user configuration, similar
> to a flow chart. Each step region consists of three register clusters:
>
> 1.Priority Region: Sets the required signals with priority.
> 2.Condition Region: Defines specific requirements (e.g., signal A
> reaches three times) and the subsequent action once the requirement is
> met.
> 3.Timer/Counter (Optional): Provides timing or counting functionality.
>
> Add a new tgu.yaml file to describe the bindings required to
> define the TGU in the device trees.
>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
> ---
> .../devicetree/bindings/arm/qcom,tgu.yaml | 92 +++++++++++++++++++
> 1 file changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/qcom,tgu.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom,tgu.yaml b/Documentation/devicetree/bindings/arm/qcom,tgu.yaml
> new file mode 100644
> index 000000000000..5b6a58ebe691
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/qcom,tgu.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +# Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/qcom,tgu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Trigger Generation Unit - TGU
> +
> +description: |
> + The Trigger Generation Unit (TGU) is a Data Engine which can be utilized
> + to sense a plurality of signals and create a trigger into the CTI or
> + generate interrupts to processors. The TGU is like the trigger circuit
> + of a Logic Analyzer. The corresponding trigger logic can be realized by
> + configuring the conditions for each step after sensing the signal.
> + Once setup and enabled, it will observe sense inputs and based upon
> + the activity of those inputs, even over clock cycles, may detect a
> + preprogrammed state/sequence and then produce a trigger or interrupt.
> +
> + The primary use case of the TGU is to detect patterns or sequences on a
> + given set of signals within some region to identify the issue in time
> + once there is abnormal behavior in the subsystem.
> +
> +maintainers:
> + - Mao Jinlong <jinlong.mao@oss.qualcomm.com>
> + - Songwei Chai <songwei.chai@oss.qualcomm.com>
> +
> +# Need a custom select here or 'arm,primecell' will match on lots of nodes
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,tgu
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,tgu
> + - const: arm,primecell
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: apb_pclk
> +
> + in-ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + additionalProperties: false
> +
> + properties:
> + port:
> + description:
> + The port mechanism here ensures the relationship between TGU and
> + TPDM, as TPDM is one of the inputs for TGU. It will allow TGU to
> + function as TPDM's helper and enable TGU when the connected
> + TPDM is enabled.
> + $ref: /schemas/graph.yaml#/properties/port
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + tgu@10b0e000 {
> + compatible = "qcom,tgu", "arm,primecell";
> + reg = <0x10b0e000 0x1000>;
> +
> + clocks = <&aoss_qmp>;
> + clock-names = "apb_pclk";
> +
> + in-ports {
> + port {
> + tgu_in_tpdm_swao: endpoint{
> + remote-endpoint = <&tpdm_swao_out_tgu>;
> + };
> + };
> + };
In Coresight driver, the helper device is enabled via enable_path, but
for TGU, it's enabling via sysfs node manually, so why do we need
connect the tgu with TPDM device? I didnt see the connection with
Coresight Core framework.
Thanks,
Jie
> + };
> +...
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 2/7] qcom-tgu: Add TGU driver
2025-12-25 2:44 ` Jie Gan
@ 2026-01-06 7:01 ` Songwei Chai
0 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2026-01-06 7:01 UTC (permalink / raw)
To: Jie Gan, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 12/25/2025 10:44 AM, Jie Gan wrote:
>
>
> On 12/19/2025 2:58 PM, Songwei Chai wrote:
>> Add driver to support device TGU (Trigger Generation Unit).
>> TGU is a Data Engine which can be utilized to sense a plurality of
>> signals and create a trigger into the CTI or generate interrupts to
>> processors. Add probe/enable/disable functions for tgu.
>>
>> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
>> ---
>> .../ABI/testing/sysfs-bus-amba-devices-tgu | 9 +
>> drivers/Makefile | 1 +
>> drivers/hwtracing/Kconfig | 2 +
>> drivers/hwtracing/qcom/Kconfig | 18 ++
>> drivers/hwtracing/qcom/Makefile | 3 +
>> drivers/hwtracing/qcom/tgu.c | 178 ++++++++++++++++++
>> drivers/hwtracing/qcom/tgu.h | 51 +++++
>> 7 files changed, 262 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> create mode 100644 drivers/hwtracing/qcom/Kconfig
>> create mode 100644 drivers/hwtracing/qcom/Makefile
>> create mode 100644 drivers/hwtracing/qcom/tgu.c
>> create mode 100644 drivers/hwtracing/qcom/tgu.h
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/
>> Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> new file mode 100644
>> index 000000000000..24dcdf1d70cc
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> @@ -0,0 +1,9 @@
>> +What: /sys/bus/amba/devices/<tgu-name>/enable_tgu
>> +Date: December 2025
>> +KernelVersion 6.19
>> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai
>> <songwei.chai@oss.qualcomm.com>
>> +Description:
>> + (RW) Set/Get the enable/disable status of TGU
>> + Accepts only one of the 2 values - 0 or 1.
>> + 0 : disable TGU.
>> + 1 : enable TGU.
>> diff --git a/drivers/Makefile b/drivers/Makefile
>> index ccc05f1eae3e..9608a3debb1f 100644
>> --- a/drivers/Makefile
>> +++ b/drivers/Makefile
>> @@ -177,6 +177,7 @@ obj-$(CONFIG_RAS) += ras/
>> obj-$(CONFIG_USB4) += thunderbolt/
>> obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
>> obj-y += hwtracing/intel_th/
>> +obj-y += hwtracing/qcom/
>> obj-$(CONFIG_STM) += hwtracing/stm/
>> obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/
>> obj-y += android/
>> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
>> index 911ee977103c..8a640218eed8 100644
>> --- a/drivers/hwtracing/Kconfig
>> +++ b/drivers/hwtracing/Kconfig
>> @@ -7,4 +7,6 @@ source "drivers/hwtracing/intel_th/Kconfig"
>> source "drivers/hwtracing/ptt/Kconfig"
>> +source "drivers/hwtracing/qcom/Kconfig"
>> +
>> endmenu
>> diff --git a/drivers/hwtracing/qcom/Kconfig b/drivers/hwtracing/qcom/
>> Kconfig
>> new file mode 100644
>> index 000000000000..d6f6d4b0f28e
>> --- /dev/null
>> +++ b/drivers/hwtracing/qcom/Kconfig
>> @@ -0,0 +1,18 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# QCOM specific hwtracing drivers
>> +#
>> +menu "Qualcomm specific hwtracing drivers"
>> +
>> +config QCOM_TGU
>> + tristate "QCOM Trigger Generation Unit driver"
>
> TGU is working as the helper device of the TPDM, can we say:
>
> select CORESIGHT_TPDM
>
Hi Jie,
TGU can act as a helper for TPDM, but TPDM is not mandatory for it, and
TGU works independently most of the time. For this reason, I don't
recommend adding "select CORESIGHT_TPDM".
>
>> + help
>> + This driver provides support for Trigger Generation Unit that is
>> + used to detect patterns or sequences on a given set of signals.
>> + TGU is used to monitor a particular bus within a given region to
>> + detect illegal transaction sequences or slave responses. It is
>> also
>> + used to monitor a data stream to detect protocol violations and to
>> + provide a trigger point for centering data around a specific event
>> + within the trace data buffer.
>> +
>> +endmenu
>> diff --git a/drivers/hwtracing/qcom/Makefile b/drivers/hwtracing/qcom/
>> Makefile
>> new file mode 100644
>> index 000000000000..5a0a868c1ea0
>> --- /dev/null
>> +++ b/drivers/hwtracing/qcom/Makefile
>> @@ -0,0 +1,3 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +
>> +obj-$(CONFIG_QCOM_TGU) += tgu.o
>> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
>> new file mode 100644
>> index 000000000000..dbd1acbd2fa5
>> --- /dev/null
>> +++ b/drivers/hwtracing/qcom/tgu.c
>> @@ -0,0 +1,178 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All
>> rights reserved.
>
> Please update the copyright.
> Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>
> same for other new created files.
Sure, will update.>
>> + */
>> +
>> +#include <linux/amba/bus.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include "tgu.h"
>> +
>> +static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
>> +{
>> + TGU_UNLOCK(drvdata->base);
>> + /* Enable TGU to program the triggers */
>> + writel(1, drvdata->base + TGU_CONTROL);
>> + TGU_LOCK(drvdata->base);
>> +}
>> +
>> +static int tgu_enable(struct device *dev)
>> +{
>> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> +
>> + guard(spinlock)(&drvdata->lock);
>> + if (drvdata->enable)
>> + return -EBUSY;
>> +
>> + tgu_write_all_hw_regs(drvdata);
>> + drvdata->enable = true;
>> +
>> + return 0;
>> +}
>> +
>> +static int tgu_disable(struct device *dev)
>
> void is better as the return value always 0?
yes, will try.>
>> +{
>> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> +
>> + guard(spinlock)(&drvdata->lock);
>> + if (drvdata->enable) {
>> + TGU_UNLOCK(drvdata->base);
>> + writel(0, drvdata->base + TGU_CONTROL);
>> + TGU_LOCK(drvdata->base);
>> +
>> + drvdata->enable = false;
>> + }
>> + return 0;
>> +}
>> +
>> +static ssize_t enable_tgu_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + bool enabled;
>> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> +
>> + guard(spinlock)(&drvdata->lock);
>> + enabled = drvdata->enable;
>> +
>> + return sysfs_emit(buf, "%d\n", enabled);
>
> Remove enabled with below:
>
> return sysfs_emit(buf, "%d\n", (int)drvdata->enable);
>
> It may suffer a warning during compile without cast?
Actually no warning here, but it's a good point.
return sysfs_emit(buf, "%d\n", enabled? 1 : 0); May be better.>
>> +}
>> +
>> +/* enable_tgu_store - Configure Trace and Gating Unit (TGU) triggers. */
>> +static ssize_t enable_tgu_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf,
>> + size_t size)
>> +{
>> + int ret = 0;
>> + unsigned long val;
>
> Prefer inverse christmas tree order
Nice suggestion.>
>> +
>> + ret = kstrtoul(buf, 0, &val);
>> + if (ret)
>> + return ret;
>
> if (kstrtoul(buf, 0, &val)
> return -EINVAL;
Yeah.. I agree that writing it this way can make the code look cleaner,
but this approach may cause the error code to be lost, as we know
kstrtoul can return not only -EINVAL but also -ERANGE.
> >> +
>> + if (val) {
>> + ret = pm_runtime_resume_and_get(dev);
>> + if (ret)
>> + return ret;
>> + ret = tgu_enable(dev);
>> + if (ret)
>> + pm_runtime_put(dev);
>
> if (ret) {
> pm_runtime_put(dev);
> return ret;
> }
>
>
>> + } else {
>> + ret = tgu_disable(dev);
>
> the return value here is 0, we can just ignore it, see previous comment.
>
>> + pm_runtime_put(dev);
>> + }
>> +
>> + if (ret)
>> + return ret;
>
> Remove if here.
The suggestion looks good, will try.>
>> + return size;
>> +}
>> +static DEVICE_ATTR_RW(enable_tgu);
>> +
>> +static struct attribute *tgu_common_attrs[] = {
>> + &dev_attr_enable_tgu.attr,
>> + NULL,
>> +};
>> +
>> +static const struct attribute_group tgu_common_grp = {
>> + .attrs = tgu_common_attrs,
>> + NULL,
>> +};
>> +
>> +static const struct attribute_group *tgu_attr_groups[] = {
>> + &tgu_common_grp,
>> + NULL,
>> +};
>> +
>> +static int tgu_probe(struct amba_device *adev, const struct amba_id *id)
>> +{
>> + struct device *dev = &adev->dev;
>> + struct tgu_drvdata *drvdata;
>> + int ret;
>> +
>> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
>> + if (!drvdata)
>> + return -ENOMEM;
>> +
>> + drvdata->dev = &adev->dev;
>> + dev_set_drvdata(dev, drvdata);
>> +
>> + drvdata->base = devm_ioremap_resource(dev, &adev->res);
>> + if (IS_ERR(drvdata->base))
>> + return PTR_ERR(drvdata->base);
>> +
>> + spin_lock_init(&drvdata->lock);
>> +
>> + ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
>> + if (ret) {
>> + dev_err(dev, "failed to create sysfs groups: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + drvdata->enable = false;
>
> default false, no need.
Adding an explicit operation here maybe improve code determinism.>
>> +
>> + pm_runtime_put(&adev->dev);
>> + return 0;
>> +}
>> +
>> +static void tgu_remove(struct amba_device *adev)
>> +{
>> + struct device *dev = &adev->dev;
>> +
>> + sysfs_remove_groups(&dev->kobj, tgu_attr_groups);
>> +
>> + tgu_disable(dev);
>> + dev_set_drvdata(dev, NULL);
>
> no need. remove will release the allocated memory.
Checked the code, indeed.
Will remove " dev_set_drvdata(dev, NULL);">
>> +}
>> +
>> +static const struct amba_id tgu_ids[] = {
>> + {
>> + .id = 0x000f0e00,
>> + .mask = 0x000fffff,
>> + },
>> + { 0, 0, NULL },
>> +};
>> +
>> +MODULE_DEVICE_TABLE(amba, tgu_ids);
>> +
>> +static struct amba_driver tgu_driver = {
>> + .drv = {
>> + .name = "qcom-tgu",
>> + .suppress_bind_attrs = true,
>> + },
>> + .probe = tgu_probe,
>> + .remove = tgu_remove,
>> + .id_table = tgu_ids,
>> +};
>> +
>> +module_amba_driver(tgu_driver);
>> +
>> +MODULE_AUTHOR("Songwei Chai <songwei.chai@oss.qualcomm.com>");
>> +MODULE_AUTHOR("Jinlong Mao <jinlong.mao@oss.qualcomm.com>");
>> +MODULE_DESCRIPTION("Qualcomm Trigger Generation Unit driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
>> new file mode 100644
>> index 000000000000..abc732f91dfc
>> --- /dev/null
>> +++ b/drivers/hwtracing/qcom/tgu.h
>> @@ -0,0 +1,51 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All
>> rights reserved.
>
> Please update the copyright.
> Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
sure.>
>> + */
>> +
>> +#ifndef _QCOM_TGU_H
>> +#define _QCOM_TGU_H
>> +
>> +/* Register addresses */
>> +#define TGU_CONTROL 0x0000
>
> #define TGU_CONTROL 0
Maybe using hex here could keep the format consistent with other
register's offset below?>
> Thanks,
> Jie
>
>> +#define TGU_LAR 0xfb0
>> +#define TGU_UNLOCK_OFFSET 0xc5acce55
>> +
>> +static inline void TGU_LOCK(void __iomem *addr)
>> +{
>> + do {
>> + /* Wait for things to settle */
>> + mb();
>> + writel_relaxed(0x0, addr + TGU_LAR);
>> + } while (0);
>> +}
>> +
>> +static inline void TGU_UNLOCK(void __iomem *addr)
>> +{
>> + do {
>> + writel_relaxed(TGU_UNLOCK_OFFSET, addr + TGU_LAR);
>> + /* Make sure everyone has seen this */
>> + mb();
>> + } while (0);
>> +}
>> +
>> +/**
>> + * struct tgu_drvdata - Data structure for a TGU (Trigger Generator
>> Unit)
>> + * @base: Memory-mapped base address of the TGU device
>> + * @dev: Pointer to the associated device structure
>> + * @lock: Spinlock for handling concurrent access
>> + * @enable: Flag indicating whether the TGU device is enabled
>> + *
>> + * This structure defines the data associated with a TGU device,
>> + * including its base address, device pointers, clock, spinlock for
>> + * synchronization, trigger data pointers, maximum limits for various
>> + * trigger-related parameters, and enable status.
>> + */
>> +struct tgu_drvdata {
>> + void __iomem *base;
>> + struct device *dev;
>> + spinlock_t lock;
>> + bool enable;
>> +};
>> +
>> +#endif
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 3/7] qcom-tgu: Add signal priority support
2025-12-25 3:20 ` Jie Gan
@ 2026-01-06 7:20 ` Songwei Chai
0 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2026-01-06 7:20 UTC (permalink / raw)
To: Jie Gan, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 12/25/2025 11:20 AM, Jie Gan wrote:
>
>
> On 12/19/2025 2:58 PM, Songwei Chai wrote:
>> Like circuit of a Logic analyzer, in TGU, the requirement could be
>> configured in each step and the trigger will be created once the
>> requirements are met. Add priority functionality here to sort the
>> signals into different priorities. The signal which is wanted could
>> be configured in each step's priority node, the larger number means
>> the higher priority and the signal with higher priority will be sensed
>> more preferentially.
>>
>> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
>> ---
>> .../ABI/testing/sysfs-bus-amba-devices-tgu | 7 +
>> drivers/hwtracing/qcom/tgu.c | 156 ++++++++++++++++++
>> drivers/hwtracing/qcom/tgu.h | 113 +++++++++++++
>> 3 files changed, 276 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/
>> Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> index 24dcdf1d70cc..d04a01368089 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> @@ -7,3 +7,10 @@ Description:
>> Accepts only one of the 2 values - 0 or 1.
>> 0 : disable TGU.
>> 1 : enable TGU.
>> +
>> +What: /sys/bus/amba/devices/<tgu-name>/
>> step[0:7]_priority[0:3]/reg[0:17]
>> +Date: December 2025
>> +KernelVersion 6.19
>> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai
>> <songwei.chai@oss.qualcomm.com>
>> +Description:
>> + (RW) Set/Get the sensed signal with specific step and
>> priority for TGU.
>> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
>> index dbd1acbd2fa5..447d7e68d132 100644
>> --- a/drivers/hwtracing/qcom/tgu.c
>> +++ b/drivers/hwtracing/qcom/tgu.c
>> @@ -14,14 +14,121 @@
>> #include "tgu.h"
>> +static int calculate_array_location(struct tgu_drvdata *drvdata,
>> + int step_index, int operation_index,
>> + int reg_index)
>> +{
>> + return operation_index * (drvdata->max_step) * (drvdata->max_reg) +
>> + step_index * (drvdata->max_reg) + reg_index;
>> +}
>> +
>> +static ssize_t tgu_dataset_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + int index;
>
> Prefer reverse Christmas tree order
Will update.>
>> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> + struct tgu_attribute *tgu_attr =
>> + container_of(attr, struct tgu_attribute, attr);
>> +
>> + index = calculate_array_location(drvdata, tgu_attr->step_index,
>> + tgu_attr->operation_index,
>> + tgu_attr->reg_num);
>> +
>> + return sysfs_emit(buf, "0x%x\n",
>> + drvdata->value_table->priority[index]);
>> +}
>> +
>> +static ssize_t tgu_dataset_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t size)
>> +{
>> + int index;
>> + unsigned long val;
>
> Prefer reverse Christmas tree order
Ditto.>
>> +
>> + struct tgu_drvdata *tgu_drvdata = dev_get_drvdata(dev);
>> + struct tgu_attribute *tgu_attr =
>> + container_of(attr, struct tgu_attribute, attr);
>> +
>> + if (kstrtoul(buf, 0, &val))
>> + return -EINVAL;
>> +
>> + guard(spinlock)(&tgu_drvdata->lock);
>> + index = calculate_array_location(tgu_drvdata, tgu_attr->step_index,
>> + tgu_attr->operation_index,
>> + tgu_attr->reg_num);
>> +
>> + tgu_drvdata->value_table->priority[index] = val;
>> + return size;
>> +}
>> +
>> +static umode_t tgu_node_visible(struct kobject *kobject,
>> + struct attribute *attr,
>> + int n)
>> +{
>> + struct device *dev = kobj_to_dev(kobject);
>> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> + int ret = SYSFS_GROUP_INVISIBLE;
>> +
>> + struct device_attribute *dev_attr =
>> + container_of(attr, struct device_attribute, attr);
>> + struct tgu_attribute *tgu_attr =
>> + container_of(dev_attr, struct tgu_attribute, attr);
>> +
>> + if (tgu_attr->step_index < drvdata->max_step) {
>> + ret = (tgu_attr->reg_num < drvdata->max_reg) ?
>> + attr->mode : 0;
>> + }
>> + return ret;
>
> if ((tgu_attr->step_index < drvdata->max_step) &&
> (tgu_attr->reg_num < drvdata->max_reg)
> return attr->mode;
>
> return 0;
These two approaches are similar, but the original one might better
align with the directory organization logic in sysfs. At the same time,
centralizing the return operations in one place could be better.>
>> +}
>> +
>> static void tgu_write_all_hw_regs(struct tgu_drvdata *drvdata)
>> {
>> + int i, j, k, index;
>> +
>> TGU_UNLOCK(drvdata->base);
>> + for (i = 0; i < drvdata->max_step; i++) {
>> + for (j = 0; j < MAX_PRIORITY; j++) {
>> + for (k = 0; k < drvdata->max_reg; k++) {
>> + index = calculate_array_location(
>> + drvdata, i, j, k);
>> +
>> + writel(drvdata->value_table->priority[index],
>> + drvdata->base +
>> + PRIORITY_REG_STEP(i, j, k));
>> + }
>> + }
>> + }
>> /* Enable TGU to program the triggers */
>> writel(1, drvdata->base + TGU_CONTROL);
>> TGU_LOCK(drvdata->base);
>> }
>> +static void tgu_set_reg_number(struct tgu_drvdata *drvdata)
>> +{
>> + int num_sense_input;
>> + int num_reg;
>> + u32 devid;
>> +
>> + devid = readl(drvdata->base + TGU_DEVID);
>> +
>> + num_sense_input = TGU_DEVID_SENSE_INPUT(devid);
>> + if (((num_sense_input * NUMBER_BITS_EACH_SIGNAL) %
>> LENGTH_REGISTER) == 0)
>> + num_reg = (num_sense_input * NUMBER_BITS_EACH_SIGNAL) /
>> LENGTH_REGISTER;
>> + else
>> + num_reg = ((num_sense_input * NUMBER_BITS_EACH_SIGNAL) /
>> LENGTH_REGISTER) + 1;
>> + drvdata->max_reg = num_reg;
>> +
>> +}
>> +
>> +static void tgu_set_steps(struct tgu_drvdata *drvdata)
>> +{
>> + u32 devid;
>> +
>> + devid = readl(drvdata->base + TGU_DEVID);
>> +
>> + drvdata->max_step = TGU_DEVID_STEPS(devid);
>> +}
>> +
>> static int tgu_enable(struct device *dev)
>> {
>> struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> @@ -106,6 +213,38 @@ static const struct attribute_group
>> tgu_common_grp = {
>> static const struct attribute_group *tgu_attr_groups[] = {
>> &tgu_common_grp,
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(0, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(1, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(2, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(3, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(4, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(5, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(6, 3),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 0),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 1),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 2),
>> + PRIORITY_ATTRIBUTE_GROUP_INIT(7, 3),
>> NULL,
>> };
>> @@ -128,12 +267,29 @@ static int tgu_probe(struct amba_device *adev,
>> const struct amba_id *id)
>> spin_lock_init(&drvdata->lock);
>> + tgu_set_reg_number(drvdata);
>> + tgu_set_steps(drvdata);
>> +
>> ret = sysfs_create_groups(&dev->kobj, tgu_attr_groups);
>> if (ret) {
>> dev_err(dev, "failed to create sysfs groups: %d\n", ret);
>> return ret;
>> }
>> + drvdata->value_table =
>> + devm_kzalloc(dev, sizeof(*drvdata->value_table), GFP_KERNEL);
>> + if (!drvdata->value_table)
>> + return -ENOMEM;
>> +
>> + drvdata->value_table->priority = devm_kzalloc(
>> + dev,
>> + MAX_PRIORITY * drvdata->max_reg * drvdata->max_step *
>> + sizeof(*(drvdata->value_table->priority)),
>> + GFP_KERNEL);
>
> can we declare a pri_size for better reading?
>
> size_t pri_size;
> unsigned int *priority
>
> pri_size = MAX_PRIORITY * drvdata->max_reg * drvdata->max_step *
> sizeof(*(drvdata->value_table->priority));
>
> priority = devm_kzalloc(dev, pri_size, GFP_KERNEL)
> if (!priority)
> return -ENOMEM;
>
> drvdata->value_table->priority = priority;
Will try.>
>> +
>> + if (!drvdata->value_table->priority)
>> + return -ENOMEM;
>> +
>> drvdata->enable = false;
>> pm_runtime_put(&adev->dev);
>> diff --git a/drivers/hwtracing/qcom/tgu.h b/drivers/hwtracing/qcom/tgu.h
>> index abc732f91dfc..2cf95c239ee7 100644
>> --- a/drivers/hwtracing/qcom/tgu.h
>> +++ b/drivers/hwtracing/qcom/tgu.h
>> @@ -10,6 +10,113 @@
>> #define TGU_CONTROL 0x0000
>> #define TGU_LAR 0xfb0
>> #define TGU_UNLOCK_OFFSET 0xc5acce55
>> +#define TGU_DEVID 0xfc8
>> +
>> +#define BMVAL(val, lsb, msb) ((val & GENMASK(msb, lsb)) >> lsb)
>> +#define TGU_DEVID_SENSE_INPUT(devid_val) ((int) BMVAL(devid_val, 10,
>> 17))
>> +#define TGU_DEVID_STEPS(devid_val) ((int)BMVAL(devid_val, 3, 6))
>> +#define NUMBER_BITS_EACH_SIGNAL 4
>> +#define LENGTH_REGISTER 32
>> +
>> +/*
>> + * TGU configuration space Step
>> configuration
>> + * offset table space layout
>> + * x-------------------------x$
>> x-------------x$
>> + * | |$ |
>> |$
>> + * | | |
>> reserve |$
>> + * | | |
>> |$
>> + * |coresight management |
>> |-------------|base+n*0x1D8+0x1F4$
>> + * | registe | |---> |
>> prioroty[3] |$
>> + * | | |
>> |-------------|base+n*0x1D8+0x194$
>> + * | | | |
>> prioroty[2] |$
>> + * |-------------------------| |
>> |-------------|base+n*0x1D8+0x134$
>> + * | | | |
>> prioroty[1] |$
>> + * | step[7] | |
>> |-------------|base+n*0x1D8+0xD4$
>> + * |-------------------------|->base+0x40+7*0x1D8 | |
>> prioroty[0] |$
>> + * | | |
>> |-------------|base+n*0x1D8+0x74$
>> + * | ... | | |
>> condition |$
>> + * | | | |
>> select |$
>> + * |-------------------------|->base+0x40+1*0x1D8 |
>> |-------------|base+n*0x1D8+0x60$
>> + * | | | |
>> condition |$
>> + * | step[0] |--------------------> |
>> decode |$
>> + * |-------------------------|-> base+0x40
>> |-------------|base+n*0x1D8+0x50$
>> + * | | |
>> |$
>> + * | Control and status space| |Timer/
>> Counter|$
>> + * | space | |
>> |$
>> + * x-------------------------x->base
>> x-------------x base+n*0x1D8+0x40$
>> + *
>> + */
>> +#define STEP_OFFSET 0x1D8
>> +#define PRIORITY_START_OFFSET 0x0074
>> +#define PRIORITY_OFFSET 0x60
>> +#define REG_OFFSET 0x4
>> +
>> +/* Calculate compare step addresses */
>> +#define PRIORITY_REG_STEP(step, priority, reg)\
>> + (PRIORITY_START_OFFSET + PRIORITY_OFFSET * priority +\
>> + REG_OFFSET * reg + STEP_OFFSET * step)
>> +
>> +#define tgu_dataset_rw(name, step_index, type,
>> reg_num) \
>> + (&((struct tgu_attribute[]){ { \
>> + __ATTR(name, 0644, tgu_dataset_show, tgu_dataset_store), \
>> + step_index, \
>> + type, \
>> + reg_num, \
>> + } })[0].attr.attr)
>> +
>> +#define STEP_PRIORITY(step_index, reg_num,
>> priority) \
>> + tgu_dataset_rw(reg##reg_num, step_index, TGU_PRIORITY##priority, \
>> + reg_num)
>> +
>> +#define STEP_PRIORITY_LIST(step_index, priority) \
>> + {STEP_PRIORITY(step_index, 0, priority), \
>> + STEP_PRIORITY(step_index, 1, priority), \
>> + STEP_PRIORITY(step_index, 2, priority), \
>> + STEP_PRIORITY(step_index, 3, priority), \
>> + STEP_PRIORITY(step_index, 4, priority), \
>> + STEP_PRIORITY(step_index, 5, priority), \
>> + STEP_PRIORITY(step_index, 6, priority), \
>> + STEP_PRIORITY(step_index, 7, priority), \
>> + STEP_PRIORITY(step_index, 8, priority), \
>> + STEP_PRIORITY(step_index, 9, priority), \
>> + STEP_PRIORITY(step_index, 10, priority), \
>> + STEP_PRIORITY(step_index, 11, priority), \
>> + STEP_PRIORITY(step_index, 12, priority), \
>> + STEP_PRIORITY(step_index, 13, priority), \
>> + STEP_PRIORITY(step_index, 14, priority), \
>> + STEP_PRIORITY(step_index, 15, priority), \
>> + STEP_PRIORITY(step_index, 16, priority), \
>> + STEP_PRIORITY(step_index, 17, priority), \
>> + NULL \
>> + }
>> +
>> +#define PRIORITY_ATTRIBUTE_GROUP_INIT(step, priority)\
>> + (&(const struct attribute_group){\
>> + .attrs = (struct attribute*[])STEP_PRIORITY_LIST(step,
>> priority),\
>> + .is_visible = tgu_node_visible,\
>> + .name = "step" #step "_priority" #priority \
>> + })
>> +
>> +enum operation_index {
>> + TGU_PRIORITY0,
>> + TGU_PRIORITY1,
>> + TGU_PRIORITY2,
>> + TGU_PRIORITY3,
>> +};
>> +
>> +/* Maximum priority that TGU supports */
>> +#define MAX_PRIORITY 4
>> +
>> +struct tgu_attribute {
>> + struct device_attribute attr;
>> + u32 step_index;
>> + enum operation_index operation_index;
>> + u32 reg_num;
>> +};
>> +
>> +struct value_table {
>> + unsigned int *priority;
>
> priority here is an array? can we declare it as unsigned int array to
> limit the allocated memory?
>
> With the declared array, we can avoid one more memory allocation.
>
> priority[index] that is used in code looks like a trick.
Yes, it should be an array, The reason it's defined as a pointer is that
its size is determined at runtime.>
>> +};
>
> only has one member, better integrate with tgu_drvdata with proper nameing.
Maybe this approach provides better scalability and enhances
structural clarity?
>
> Thanks,
> Jie
>
>> static inline void TGU_LOCK(void __iomem *addr)
>> {
>> @@ -35,6 +142,9 @@ static inline void TGU_UNLOCK(void __iomem *addr)
>> * @dev: Pointer to the associated device structure
>> * @lock: Spinlock for handling concurrent access
>> * @enable: Flag indicating whether the TGU device is enabled
>> + * @value_table: Store given value based on relevant parameters.
>> + * @max_reg: Maximum number of registers
>> + * @max_step: Maximum step size
>> *
>> * This structure defines the data associated with a TGU device,
>> * including its base address, device pointers, clock, spinlock for
>> @@ -46,6 +156,9 @@ struct tgu_drvdata {
>> struct device *dev;
>> spinlock_t lock;
>> bool enable;
>> + struct value_table *value_table;
>> + int max_reg;
>> + int max_step;
>> };
>> #endif
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 7/7] qcom-tgu: Add reset node to initialize
2025-12-25 5:56 ` Jie Gan
@ 2026-01-06 7:22 ` Songwei Chai
0 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2026-01-06 7:22 UTC (permalink / raw)
To: Jie Gan, andersson, alexander.shishkin, mike.leach,
suzuki.poulose, james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 12/25/2025 1:56 PM, Jie Gan wrote:
>
>
> On 12/19/2025 2:59 PM, Songwei Chai wrote:
>> Add reset node to initialize the value of
>> priority/condition_decode/condition_select/timer/counter nodes.
>>
>> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
>> ---
>> .../ABI/testing/sysfs-bus-amba-devices-tgu | 7 ++
>> drivers/hwtracing/qcom/tgu.c | 74 +++++++++++++++++++
>> 2 files changed, 81 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/
>> Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> index 010eade0a1c5..0733b3e07b45 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> @@ -42,3 +42,10 @@ KernelVersion 6.19
>> Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai
>> <songwei.chai@oss.qualcomm.com>
>> Description:
>> (RW) Set/Get the counter value with specific step for TGU.
>> +
>> +What: /sys/bus/amba/devices/<tgu-name>/reset_tgu
>> +Date: December 2025
>> +KernelVersion 6.19
>> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai
>> <songwei.chai@oss.qualcomm.com>
>> +Description:
>> + (Write) Write 1 to reset the dataset for TGU.
>> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
>> index d4210869556e..5a8c6af9b719 100644
>> --- a/drivers/hwtracing/qcom/tgu.c
>> +++ b/drivers/hwtracing/qcom/tgu.c
>> @@ -425,8 +425,82 @@ static ssize_t enable_tgu_store(struct device *dev,
>> }
>> static DEVICE_ATTR_RW(enable_tgu);
>> +/* reset_tgu_store - Reset Trace and Gating Unit (TGU) configuration. */
>> +static ssize_t reset_tgu_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf,
>> + size_t size)
>> +{
>> + unsigned long value;
>> + struct tgu_drvdata *drvdata = dev_get_drvdata(dev);
>> + int i, j, ret;
>> +
>> + if (kstrtoul(buf, 0, &value) || value == 0)
>> + return -EINVAL;
>> +
>> + if (!drvdata->enable) {
>> + ret = pm_runtime_get_sync(drvdata->dev);
>> + if (ret < 0) {
>> + pm_runtime_put(drvdata->dev);
>> + return ret;
>> + }
>> + }
>> +
>> + guard(spinlock)(&drvdata->lock);
>> + TGU_UNLOCK(drvdata->base);
>> +
>> + writel(0, drvdata->base + TGU_CONTROL);
>
> Better move TGU_LOCK(drvdata->base) here
Yeah.>
> Thanks,
> Jie
>
>> +
>> + if (drvdata->value_table->priority)
>> + memset(drvdata->value_table->priority, 0,
>> + MAX_PRIORITY * drvdata->max_step *
>> + drvdata->max_reg * sizeof(unsigned int));
>> +
>> + if (drvdata->value_table->condition_decode)
>> + memset(drvdata->value_table->condition_decode, 0,
>> + drvdata->max_condition_decode * drvdata->max_step *
>> + sizeof(unsigned int));
>> +
>> + /* Initialize all condition registers to NOT(value=0x1000000) */
>> + for (i = 0; i < drvdata->max_step; i++) {
>> + for (j = 0; j < drvdata->max_condition_decode; j++) {
>> + drvdata->value_table
>> + ->condition_decode[calculate_array_location(
>> + drvdata, i, TGU_CONDITION_DECODE, j)] =
>> + 0x1000000;
>> + }
>> + }
>> +
>> + if (drvdata->value_table->condition_select)
>> + memset(drvdata->value_table->condition_select, 0,
>> + drvdata->max_condition_select * drvdata->max_step *
>> + sizeof(unsigned int));
>> +
>> + if (drvdata->value_table->timer)
>> + memset(drvdata->value_table->timer, 0,
>> + (drvdata->max_step) *
>> + (drvdata->max_timer) *
>> + sizeof(unsigned int));
>> +
>> + if (drvdata->value_table->counter)
>> + memset(drvdata->value_table->counter, 0,
>> + (drvdata->max_step) *
>> + (drvdata->max_counter) *
>> + sizeof(unsigned int));
>> +
>> + dev_dbg(dev, "Coresight-TGU reset complete\n");
>> +
>> + TGU_LOCK(drvdata->base);
>> +
>> + drvdata->enable = false;
>> + pm_runtime_put(drvdata->dev);
>> +
>> + return size;
>> +}
>> +static DEVICE_ATTR_WO(reset_tgu);
>> +
>> static struct attribute *tgu_common_attrs[] = {
>> &dev_attr_enable_tgu.attr,
>> + &dev_attr_reset_tgu.attr,
>> NULL,
>> };
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 7/7] qcom-tgu: Add reset node to initialize
2025-12-19 6:59 ` [PATCH v9 7/7] qcom-tgu: Add reset node to initialize Songwei Chai
2025-12-25 5:56 ` Jie Gan
@ 2026-01-06 10:16 ` Suzuki K Poulose
2026-01-07 5:33 ` Songwei Chai
1 sibling, 1 reply; 19+ messages in thread
From: Suzuki K Poulose @ 2026-01-06 10:16 UTC (permalink / raw)
To: Songwei Chai, andersson, alexander.shishkin, mike.leach,
james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 19/12/2025 06:59, Songwei Chai wrote:
> Add reset node to initialize the value of
> priority/condition_decode/condition_select/timer/counter nodes.
>
> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
> ---
> .../ABI/testing/sysfs-bus-amba-devices-tgu | 7 ++
> drivers/hwtracing/qcom/tgu.c | 74 +++++++++++++++++++
> 2 files changed, 81 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> index 010eade0a1c5..0733b3e07b45 100644
> --- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
> @@ -42,3 +42,10 @@ KernelVersion 6.19
> Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
> Description:
> (RW) Set/Get the counter value with specific step for TGU.
> +
> +What: /sys/bus/amba/devices/<tgu-name>/reset_tgu
> +Date: December 2025
> +KernelVersion 6.19
> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai <songwei.chai@oss.qualcomm.com>
> +Description:
> + (Write) Write 1 to reset the dataset for TGU.
> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
> index d4210869556e..5a8c6af9b719 100644
> --- a/drivers/hwtracing/qcom/tgu.c
> +++ b/drivers/hwtracing/qcom/tgu.c
> @@ -425,8 +425,82 @@ static ssize_t enable_tgu_store(struct device *dev,
> +
> + dev_dbg(dev, "Coresight-TGU reset complete\n");
Qualcomm-TGU ?
Suzuki
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v9 7/7] qcom-tgu: Add reset node to initialize
2026-01-06 10:16 ` Suzuki K Poulose
@ 2026-01-07 5:33 ` Songwei Chai
0 siblings, 0 replies; 19+ messages in thread
From: Songwei Chai @ 2026-01-07 5:33 UTC (permalink / raw)
To: Suzuki K Poulose, andersson, alexander.shishkin, mike.leach,
james.clark, krzk+dt, conor+dt
Cc: linux-kernel, linux-arm-kernel, linux-arm-msm, coresight,
devicetree, gregkh
On 1/6/2026 6:16 PM, Suzuki K Poulose wrote:
> On 19/12/2025 06:59, Songwei Chai wrote:
>> Add reset node to initialize the value of
>> priority/condition_decode/condition_select/timer/counter nodes.
>>
>> Signed-off-by: Songwei Chai <songwei.chai@oss.qualcomm.com>
>> ---
>> .../ABI/testing/sysfs-bus-amba-devices-tgu | 7 ++
>> drivers/hwtracing/qcom/tgu.c | 74 +++++++++++++++++++
>> 2 files changed, 81 insertions(+)
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu b/
>> Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> index 010eade0a1c5..0733b3e07b45 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> +++ b/Documentation/ABI/testing/sysfs-bus-amba-devices-tgu
>> @@ -42,3 +42,10 @@ KernelVersion 6.19
>> Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai
>> <songwei.chai@oss.qualcomm.com>
>> Description:
>> (RW) Set/Get the counter value with specific step for TGU.
>> +
>> +What: /sys/bus/amba/devices/<tgu-name>/reset_tgu
>> +Date: December 2025
>> +KernelVersion 6.19
>> +Contact: Jinlong Mao <jinlong.mao@oss.qualcomm.com>, Songwei Chai
>> <songwei.chai@oss.qualcomm.com>
>> +Description:
>> + (Write) Write 1 to reset the dataset for TGU.
>> diff --git a/drivers/hwtracing/qcom/tgu.c b/drivers/hwtracing/qcom/tgu.c
>> index d4210869556e..5a8c6af9b719 100644
>> --- a/drivers/hwtracing/qcom/tgu.c
>> +++ b/drivers/hwtracing/qcom/tgu.c
>> @@ -425,8 +425,82 @@ static ssize_t enable_tgu_store(struct device *dev,
>
>
>> +
>> + dev_dbg(dev, "Coresight-TGU reset complete\n");
>
> Qualcomm-TGU ?Exactly! Thanks for reminder.>
> Suzuki
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2026-01-07 5:33 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-12-19 6:58 [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
2025-12-19 6:58 ` [PATCH v9 1/7] dt-bindings: arm: Add support for Qualcomm TGU trace Songwei Chai
2025-12-25 2:57 ` Jie Gan
2025-12-25 6:28 ` Jie Gan
2025-12-19 6:58 ` [PATCH v9 2/7] qcom-tgu: Add TGU driver Songwei Chai
2025-12-25 2:44 ` Jie Gan
2026-01-06 7:01 ` Songwei Chai
2025-12-19 6:58 ` [PATCH v9 3/7] qcom-tgu: Add signal priority support Songwei Chai
2025-12-25 3:20 ` Jie Gan
2026-01-06 7:20 ` Songwei Chai
2025-12-19 6:58 ` [PATCH v9 4/7] qcom-tgu: Add TGU decode support Songwei Chai
2025-12-19 6:59 ` [PATCH v9 5/7] qcom-tgu: Add support to configure next action Songwei Chai
2025-12-19 6:59 ` [PATCH v9 6/7] qcom-tgu: Add timer/counter functionality for TGU Songwei Chai
2025-12-19 6:59 ` [PATCH v9 7/7] qcom-tgu: Add reset node to initialize Songwei Chai
2025-12-25 5:56 ` Jie Gan
2026-01-06 7:22 ` Songwei Chai
2026-01-06 10:16 ` Suzuki K Poulose
2026-01-07 5:33 ` Songwei Chai
2025-12-25 1:52 ` [PATCH v9 0/7] Provide support for Trigger Generation Unit Songwei Chai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox