From: Neil Armstrong <neil.armstrong@linaro.org>
To: xianwei.zhao@amlogic.com, Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues
Date: Fri, 21 Mar 2025 10:37:57 +0100 [thread overview]
Message-ID: <5caa550a-ffdf-477d-92f4-a3222b7fba29@linaro.org> (raw)
In-Reply-To: <20250321-fix-a4-pinctrl-node-v1-1-5719f9f09932@amlogic.com>
Hi,
On 21/03/2025 03:23, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao@amlogic.com>
>
> When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
> a warning message appears.
> "Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl:
> missing or empty reg/ranges property"
>
> Add the unit address to the pinctrl node to fix it.
I've delayed the pinctrl to next release so plase rebase
the commit on top of https://web.git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=for-next
and fix the warnings here, and make sure DTBS_CHECK still passes.
Neil
>
> Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
> 1 file changed, 55 insertions(+), 47 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> index fa80fa365f13..582e0043024b 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> @@ -51,87 +51,52 @@ pwrc: power-controller {
> };
>
> &apb {
> - gpio_intc: interrupt-controller@4080 {
> - compatible = "amlogic,a4-gpio-intc",
> - "amlogic,meson-gpio-intc";
> - reg = <0x0 0x4080 0x0 0x20>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - amlogic,channel-interrupts =
> - <10 11 12 13 14 15 16 17 18 19 20 21>;
> - };
> -
> - gpio_ao_intc: interrupt-controller@8e72c {
> - compatible = "amlogic,a4-gpio-ao-intc",
> - "amlogic,meson-gpio-intc";
> - reg = <0x0 0x8e72c 0x0 0x0c>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - amlogic,channel-interrupts = <140 141>;
> - };
> -
> - periphs_pinctrl: pinctrl {
> + periphs_pinctrl: pinctrl@4000 {
> compatible = "amlogic,pinctrl-a4";
> #address-cells = <2>;
> #size-cells = <2>;
> - ranges;
> + ranges = <0x0 0x0 0x0 0x4000 0x0 0x280>;
>
> - gpiox: gpio@4100 {
> - reg = <0 0x4100 0 0x40>, <0 0x400c 0 0xc>;
> + gpiox: gpio@100 {
> + reg = <0 0x100 0 0x40>, <0 0xc 0 0xc>;
> reg-names = "gpio", "mux";
> gpio-controller;
> #gpio-cells = <2>;
> gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 18>;
> };
>
> - gpiot: gpio@4140 {
> - reg = <0 0x4140 0 0x40>, <0 0x402c 0 0xc>;
> + gpiot: gpio@140 {
> + reg = <0 0x140 0 0x40>, <0 0x2c 0 0xc>;
> reg-names = "gpio", "mux";
> gpio-controller;
> #gpio-cells = <2>;
> gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 23>;
> };
>
> - gpiod: gpio@4180 {
> - reg = <0 0x4180 0 0x40>, <0 0x4040 0 0x8>;
> + gpiod: gpio@180 {
> + reg = <0 0x180 0 0x40>, <0 0x40 0 0x8>;
> reg-names = "gpio", "mux";
> gpio-controller;
> #gpio-cells = <2>;
> gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
> };
>
> - gpioe: gpio@41c0 {
> - reg = <0 0x41c0 0 0x40>, <0 0x4048 0 0x4>;
> + gpioe: gpio@1c0 {
> + reg = <0 0x1c0 0 0x40>, <0 0x48 0 0x4>;
> reg-names = "gpio", "mux";
> gpio-controller;
> #gpio-cells = <2>;
> gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
> };
>
> - gpiob: gpio@4240 {
> - reg = <0 0x4240 0 0x40>, <0 0x4000 0 0x8>;
> + gpiob: gpio@240 {
> + reg = <0 0x240 0 0x40>, <0 0 0 0x8>;
> reg-names = "gpio", "mux";
> gpio-controller;
> #gpio-cells = <2>;
> gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
> };
>
> - gpioao: gpio@8e704 {
> - reg = <0 0x8e704 0 0x16>, <0 0x8e700 0 0x4>;
> - reg-names = "gpio", "mux";
> - gpio-controller;
> - #gpio-cells = <2>;
> - gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
> - };
> -
> - test_n: gpio@8e744 {
> - reg = <0 0x8e744 0 0x20>;
> - reg-names = "gpio";
> - gpio-controller;
> - #gpio-cells = <2>;
> - gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
> - };
> -
> func-uart-a {
> uart_a_default: group-uart-a-pins1 {
> pinmux = <AML_PINMUX(AMLOGIC_GPIO_X, 11, 1)>,
> @@ -186,4 +151,47 @@ uart_e_default: group-uart-e-pins {
> };
> };
> };
> +
> + gpio_intc: interrupt-controller@4080 {
> + compatible = "amlogic,a4-gpio-intc",
> + "amlogic,meson-gpio-intc";
> + reg = <0x0 0x4080 0x0 0x20>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + amlogic,channel-interrupts =
> + <10 11 12 13 14 15 16 17 18 19 20 21>;
> + };
> +
> + ao_pinctrl: pinctrl@8e700 {
> + compatible = "amlogic,pinctrl-a4";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0x8e700 0x0 0x80>;
> +
> + gpioao: gpio@4 {
> + reg = <0 0x4 0 0x16>, <0 0 0 0x4>;
> + reg-names = "gpio", "mux";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_AO<<8) 7>;
> + };
> +
> + test_n: gpio@44 {
> + reg = <0 0x44 0 0x20>;
> + reg-names = "gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
> + };
> + };
> +
> + gpio_ao_intc: interrupt-controller@8e72c {
> + compatible = "amlogic,a4-gpio-ao-intc",
> + "amlogic,meson-gpio-intc";
> + reg = <0x0 0x8e72c 0x0 0x0c>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + amlogic,channel-interrupts = <140 141>;
> + };
> +
> };
>
> ---
> base-commit: 73a143e436311183186ab4b365a84c662f2c9651
> change-id: 20250317-fix-a4-pinctrl-node-9babfd44e085
>
> Best regards,
next prev parent reply other threads:[~2025-03-21 9:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-21 2:23 [PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues Xianwei Zhao via B4 Relay
2025-03-21 9:25 ` Krzysztof Kozlowski
2025-03-21 9:58 ` Xianwei Zhao
2025-03-21 9:37 ` Neil Armstrong [this message]
2025-03-21 9:49 ` Xianwei Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5caa550a-ffdf-477d-92f4-a3222b7fba29@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=robh@kernel.org \
--cc=xianwei.zhao@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox