* [PATCH 1/2] Revert "arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal"
2026-04-01 2:05 [PATCH 0/2] arm64: dts: imx8m-kontron: Revert reading SD_VSEL signal Peng Fan (OSS)
@ 2026-04-01 2:05 ` Peng Fan (OSS)
2026-04-01 2:05 ` [PATCH 2/2] Revert "arm64: dts: imx8mp-kontron: " Peng Fan (OSS)
2026-04-01 8:28 ` [PATCH 0/2] arm64: dts: imx8m-kontron: Revert reading SD_VSEL signal Frieder Schrempf
2 siblings, 0 replies; 4+ messages in thread
From: Peng Fan (OSS) @ 2026-04-01 2:05 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Frieder Schrempf
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
This reverts commit 8472751c4d96b558d60d0f6aede6b24b64bcb3c9.
The board uses SDHC VSELECT to automatically switch between 1.8v and
3.3v. It does not use GPIO to control the PMIC SD_VSEL signal.
The original commit intends to read back SD_VSEL value from GPIO,
but it is wrong. When MUX is configured as SDHC VSELECT, it is
impossible to read back the value from GPIO controller. Setting SION
could only enable the input path for the mux function. It could not
redirect the input to GPIO.
And value "0x40000d0" is wrong, SION is BIT30, not BIT26.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts | 10 +++-------
arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 7 +++----
2 files changed, 6 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index e756fe5db56b6a19c309fcbb94475629e5f2b2a0..dd59af0ebaae55ede743d4187b1165041d655cf2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -254,10 +254,6 @@ &pwm2 {
status = "okay";
};
-®_nvcc_sd {
- sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-};
-
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -466,7 +462,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0
>;
};
@@ -479,7 +475,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0
>;
};
@@ -492,7 +488,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0
>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 96987910609f1b0083f5ae0c957f0baf10bfa826..4fb13d8ecfd45a8587e169b7d0a08e811745b5a9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -342,7 +342,6 @@ reg_nvcc_sd: LDO5 {
regulator-name = "NVCC_SD (LDO5)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -795,7 +794,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */
MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000090
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90
>;
};
@@ -808,7 +807,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */
MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000090
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90
>;
};
@@ -821,7 +820,7 @@ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */
MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 /* SDIO_A_WP */
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x40000090
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x90
>;
};
--
2.37.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] Revert "arm64: dts: imx8mp-kontron: Add support for reading SD_VSEL signal"
2026-04-01 2:05 [PATCH 0/2] arm64: dts: imx8m-kontron: Revert reading SD_VSEL signal Peng Fan (OSS)
2026-04-01 2:05 ` [PATCH 1/2] Revert "arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal" Peng Fan (OSS)
@ 2026-04-01 2:05 ` Peng Fan (OSS)
2026-04-01 8:28 ` [PATCH 0/2] arm64: dts: imx8m-kontron: Revert reading SD_VSEL signal Frieder Schrempf
2 siblings, 0 replies; 4+ messages in thread
From: Peng Fan (OSS) @ 2026-04-01 2:05 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Frieder Schrempf
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
This reverts commit 39e4189d9d63a0b6fc15458ce0136e99ecdfb1b8.
The board uses SDHC VSELECT to automatically switch between 1.8v and
3.3v. It does not use GPIO to control the PMIC SD_VSEL signal.
The original commit intends to read back SD_VSEL value from GPIO,
but it is wrong. When MUX is configured as SDHC VSELECT, it is
impossible to read back the value from GPIO controller. Setting SION
could only enable the input path for the mux function. It could not
redirect the input to GPIO.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
index bc1a261bb000ed0e8071d214111c12689bc394d0..ea69c639b30b8f7e05bb103074c6481d88560c53 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -311,7 +311,6 @@ reg_nvcc_sd: LDO5 {
regulator-name = "NVCC_SD (LDO5)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -815,7 +814,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 /* SDIO_A_D0 */
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x400001d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
>;
};
@@ -827,7 +826,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 /* SDIO_A_D0 */
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x400001d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
>;
};
@@ -839,7 +838,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 /* SDIO_A_D0 */
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x400001d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
>;
};
--
2.37.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 0/2] arm64: dts: imx8m-kontron: Revert reading SD_VSEL signal
2026-04-01 2:05 [PATCH 0/2] arm64: dts: imx8m-kontron: Revert reading SD_VSEL signal Peng Fan (OSS)
2026-04-01 2:05 ` [PATCH 1/2] Revert "arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal" Peng Fan (OSS)
2026-04-01 2:05 ` [PATCH 2/2] Revert "arm64: dts: imx8mp-kontron: " Peng Fan (OSS)
@ 2026-04-01 8:28 ` Frieder Schrempf
2 siblings, 0 replies; 4+ messages in thread
From: Frieder Schrempf @ 2026-04-01 8:28 UTC (permalink / raw)
To: Peng Fan (OSS), Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, Peng Fan
On 01.04.26 04:05, Peng Fan (OSS) wrote:
> When MUX is configured as SDHC VSELECT, enabling SION is not able
> to read back the SD_VSEL value. SION is used for force input path,
> not to redirect the PAD value to GPIO(the other mux).
>
> This has been confirmed by reading i.MX8MP RTL. we have not check
> i.MX8MM RTL, but it should be same.
It seems like you are right and I misinterpreted the documentation and
also misinterpreted my test results. So I was probably basing my work on
wrong assumptions.
>
> Not sure whether need to add Fixes commit for the patches, just revert
> patches.
This was introduced in 6.15. I would like to add Fixes tags for the
reverts. And can we add patches in this series that switch to GPIO
control as done in [1] and also tag them as fixes? This should allow to
read back the correct voltage from the regulator.
>
> For the U-Boot support, either drop vqmmc-supply or switch to use gpio
> control to replace vselect control.
>
> And below patch should also be revisited.
I think we can revert this, too.
> commit 3ce6f4f943ddd9edc03e450a2a0d89cb025b165b
> Author: Frieder Schrempf <frieder.schrempf@kontron.de>
> Date: Wed Dec 18 16:27:27 2024 +0100
>
> regulator: pca9450: Fix control register for LDO5
>
> To supporting read back signal, need the MUX set as GPIO and support
> in/out, not set mux as VSELECT.
>
> TBH: I have not test setting MUX as GPIO, anyway we need to fix DT.
If we mux as GPIO, then we don't need to read back. I think in this case
the best solution is the one used in [1].
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=5245dc5
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> Peng Fan (2):
> Revert "arm64: dts: imx8mm-kontron: Add support for reading SD_VSEL signal"
> Revert "arm64: dts: imx8mp-kontron: Add support for reading SD_VSEL signal"
>
> arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts | 10 +++-------
> arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi | 7 +++----
> arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi | 7 +++----
> 3 files changed, 9 insertions(+), 15 deletions(-)
> ---
> base-commit: 3b058d1aeeeff27a7289529c4944291613b364e9
> change-id: 20260329-imx8m-ldo5-90e369066213
>
> Best regards,
^ permalink raw reply [flat|nested] 4+ messages in thread