* Re: [PATCH v8 6/8] scsi: ufs: make the UFS variant a platform device
2015-10-25 10:50 ` [PATCH v8 6/8] scsi: ufs: make the UFS variant a platform device Yaniv Gardi
@ 2015-10-27 15:04 ` Gilad Broner
2015-10-27 19:25 ` Rob Herring
1 sibling, 0 replies; 3+ messages in thread
From: Gilad Broner @ 2015-10-27 15:04 UTC (permalink / raw)
Cc: robherring2, james.bottomley, pebolle, hch, linux-kernel,
linux-scsi, linux-arm-msm, santoshsy, linux-scsi-owner, subhashj,
ygardi, gbroner, draviv, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Vinayak Holikatti, James E.J. Bottomley,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
> a platform device.
> In order to do so a few additional changes are required:
> 1. The ufshcd-pltfrm is no longer serves as a platform device.
> Now it only serves as a group of platform APIs such as PM APIs
> (runtime suspend/resume, system suspend/resume etc), parsers of
> clocks, regulators and pm_levels from DT.
> 2. What used to be the old platform "probe" is now "only"
> a pltfrm_init() routine, that does exactly the same, but only
> being called by the new probe function of the UFS variant.
>
> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
>
> ---
> Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 58 +++++++++++++
> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 11 ++-
> drivers/scsi/ufs/ufs-qcom.c | 62 +++++++++++++-
> drivers/scsi/ufs/ufshcd-pltfrm.c | 98
> ++++++----------------
> drivers/scsi/ufs/ufshcd-pltfrm.h | 41 +++++++++
> drivers/scsi/ufs/ufshcd.c | 10 +++
> drivers/scsi/ufs/ufshcd.h | 1 +
> 7 files changed, 207 insertions(+), 74 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.h
>
> diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> new file mode 100644
> index 0000000..070baf4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> @@ -0,0 +1,58 @@
> +* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
> +
> +UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
> +Each UFS PHY node should have its own node.
> +
> +To bind UFS PHY with UFS host controller, the controller node should
> +contain a phandle reference to UFS PHY node.
> +
> +Required properties:
> +- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm"
> + or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
> +- reg : should contain PHY register address space
> (mandatory),
> +- reg-names : indicates various resources passed to driver (via
> reg proptery) by name.
> + Required "reg-names" is "phy_mem".
> +- #phy-cells : This property shall be set to 0
> +- vdda-phy-supply : phandle to main PHY supply for analog domain
> +- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
> +- clocks : List of phandle and clock specifier pairs
> +- clock-names : List of clock input name strings sorted in the same
> + order as the clocks property. "ref_clk_src", "ref_clk",
> + "tx_iface_clk" & "rx_iface_clk" are mandatory but
> + "ref_clk_parent" is optional
> +
> +Optional properties:
> +- vdda-phy-max-microamp : specifies max. load that can be drawn from phy
> supply
> +- vdda-pll-max-microamp : specifies max. load that can be drawn from pll
> supply
> +- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
> +- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from
> this supply
> +- vddp-ref-clk-always-on : specifies if this supply needs to be kept
> always on
> +
> +Example:
> +
> + ufsphy1: ufsphy@0xfc597000 {
> + compatible = "qcom,ufs-phy-qmp-20nm";
> + reg = <0xfc597000 0x800>;
> + reg-names = "phy_mem";
> + #phy-cells = <0>;
> + vdda-phy-supply = <&pma8084_l4>;
> + vdda-pll-supply = <&pma8084_l12>;
> + vdda-phy-max-microamp = <50000>;
> + vdda-pll-max-microamp = <1000>;
> + clock-names = "ref_clk_src",
> + "ref_clk_parent",
> + "ref_clk",
> + "tx_iface_clk",
> + "rx_iface_clk";
> + clocks = <&clock_rpm clk_ln_bb_clk>,
> + <&clock_gcc clk_pcie_1_phy_ldo >,
> + <&clock_gcc clk_ufs_phy_ldo>,
> + <&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
> + <&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
> + };
> +
> + ufshc@0xfc598000 {
> + ...
> + phys = <&ufsphy1>;
> + phy-names = "ufsphy";
> + };
> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> index 5357919..03c0e98 100644
> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> @@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host
> controllers.
> Each UFS controller instance should have its own node.
>
> Required properties:
> -- compatible : compatible list, contains "jedec,ufs-1.1"
> +- compatible : must contain "jedec,ufs-1.1", may also list one or more
> + of the following:
> + "qcom,msm8994-ufshc"
> + "qcom,msm8996-ufshc"
> + "qcom,ufshc"
> - interrupts : <interrupt mapping for UFS host controller IRQ>
> - reg : <registers mapping>
>
> Optional properties:
> +- phys : phandle to UFS PHY node
> +- phy-names : the string "ufsphy" when is found in a node,
> along
> + with "phys" attribute, provides phandle to UFS
> PHY node
> - vdd-hba-supply : phandle to UFS host controller supply regulator
> node
> - vcc-supply : phandle to VCC supply regulator node
> - vccq-supply : phandle to VCCQ supply regulator node
> @@ -54,4 +61,6 @@ Example:
> clocks = <&core 0>, <&ref 0>, <&iface 0>;
> clock-names = "core_clk", "ref_clk", "iface_clk";
> freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
> + phys = <&ufsphy1>;
> + phy-names = "ufsphy";
> };
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 329ac84..b275a9a 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -19,6 +19,7 @@
>
> #include <linux/phy/phy-qcom-ufs.h>
> #include "ufshcd.h"
> +#include "ufshcd-pltfrm.h"
> #include "unipro.h"
> #include "ufs-qcom.h"
> #include "ufshci.h"
> @@ -1036,7 +1037,7 @@ void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
> * The variant operations configure the necessary controller and PHY
> * handshake during initialization.
> */
> -static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> +static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> .name = "qcom",
> .init = ufs_qcom_init,
> .exit = ufs_qcom_exit,
> @@ -1050,4 +1051,63 @@ static const struct ufs_hba_variant_ops
> ufs_hba_qcom_vops = {
> .resume = ufs_qcom_resume,
> };
>
> +/**
> + * ufs_qcom_probe - probe routine of the driver
> + * @pdev: pointer to Platform device handle
> + *
> + * Return zero for success and non-zero for failure
> + */
> +static int ufs_qcom_probe(struct platform_device *pdev)
> +{
> + int err;
> + struct device *dev = &pdev->dev;
> +
> + /* Perform generic probe */
> + err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
> + if (err)
> + dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
> +
> + return err;
> +}
> +
> +/**
> + * ufs_qcom_remove - set driver_data of the device to NULL
> + * @pdev: pointer to platform device handle
> + *
> + * Always return 0
> + */
> +static int ufs_qcom_remove(struct platform_device *pdev)
> +{
> + struct ufs_hba *hba = platform_get_drvdata(pdev);
> +
> + pm_runtime_get_sync(&(pdev)->dev);
> + ufshcd_remove(hba);
> + return 0;
> +}
> +
> +static const struct of_device_id ufs_qcom_of_match[] = {
> + { .compatible = "qcom,ufshc"},
> + {},
> +};
> +
> +static const struct dev_pm_ops ufs_qcom_pm_ops = {
> + .suspend = ufshcd_pltfrm_suspend,
> + .resume = ufshcd_pltfrm_resume,
> + .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
> + .runtime_resume = ufshcd_pltfrm_runtime_resume,
> + .runtime_idle = ufshcd_pltfrm_runtime_idle,
> +};
> +
> +static struct platform_driver ufs_qcom_pltform = {
> + .probe = ufs_qcom_probe,
> + .remove = ufs_qcom_remove,
> + .shutdown = ufshcd_pltfrm_shutdown,
> + .driver = {
> + .name = "ufshcd-qcom",
> + .pm = &ufs_qcom_pm_ops,
> + .of_match_table = of_match_ptr(ufs_qcom_of_match),
> + },
> +};
> +module_platform_driver(ufs_qcom_pltform);
> +
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c
> b/drivers/scsi/ufs/ufshcd-pltfrm.c
> index 7db9564..9714f2a 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -38,20 +38,7 @@
> #include <linux/of.h>
>
> #include "ufshcd.h"
> -
> -static const struct of_device_id ufs_of_match[];
> -static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
> -{
> - if (dev->of_node) {
> - const struct of_device_id *match;
> -
> - match = of_match_node(ufs_of_match, dev->of_node);
> - if (match)
> - return (struct ufs_hba_variant_ops *)match->data;
> - }
> -
> - return NULL;
> -}
> +#include "ufshcd-pltfrm.h"
>
> static int ufshcd_parse_clock_info(struct ufs_hba *hba)
> {
> @@ -245,10 +232,11 @@ out:
> * Returns 0 if successful
> * Returns non-zero otherwise
> */
> -static int ufshcd_pltfrm_suspend(struct device *dev)
> +int ufshcd_pltfrm_suspend(struct device *dev)
> {
> return ufshcd_system_suspend(dev_get_drvdata(dev));
> }
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_suspend);
>
> /**
> * ufshcd_pltfrm_resume - resume power management function
> @@ -257,43 +245,47 @@ static int ufshcd_pltfrm_suspend(struct device *dev)
> * Returns 0 if successful
> * Returns non-zero otherwise
> */
> -static int ufshcd_pltfrm_resume(struct device *dev)
> +int ufshcd_pltfrm_resume(struct device *dev)
> {
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume);
>
> -static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> +int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> {
> return ufshcd_runtime_suspend(dev_get_drvdata(dev));
> }
> -static int ufshcd_pltfrm_runtime_resume(struct device *dev)
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_suspend);
> +
> +int ufshcd_pltfrm_runtime_resume(struct device *dev)
> {
> return ufshcd_runtime_resume(dev_get_drvdata(dev));
> }
> -static int ufshcd_pltfrm_runtime_idle(struct device *dev)
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_resume);
> +
> +int ufshcd_pltfrm_runtime_idle(struct device *dev)
> {
> return ufshcd_runtime_idle(dev_get_drvdata(dev));
> }
> -#else /* !CONFIG_PM */
> -#define ufshcd_pltfrm_suspend NULL
> -#define ufshcd_pltfrm_resume NULL
> -#define ufshcd_pltfrm_runtime_suspend NULL
> -#define ufshcd_pltfrm_runtime_resume NULL
> -#define ufshcd_pltfrm_runtime_idle NULL
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle);
> +
> #endif /* CONFIG_PM */
>
> -static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> +void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> {
> ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
> }
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);
>
> /**
> - * ufshcd_pltfrm_probe - probe routine of the driver
> + * ufshcd_pltfrm_init - probe routine of the driver
> * @pdev: pointer to Platform device handle
> + * @vops: pointer to variant ops
> *
> * Returns 0 on success, non-zero value on failure
> */
> -static int ufshcd_pltfrm_probe(struct platform_device *pdev)
> +int ufshcd_pltfrm_init(struct platform_device *pdev,
> + struct ufs_hba_variant_ops *vops)
> {
> struct ufs_hba *hba;
> void __iomem *mmio_base;
> @@ -321,19 +313,19 @@ static int ufshcd_pltfrm_probe(struct
> platform_device *pdev)
> goto out;
> }
>
> - hba->vops = get_variant_ops(&pdev->dev);
> + hba->vops = vops;
>
> err = ufshcd_parse_clock_info(hba);
> if (err) {
> dev_err(&pdev->dev, "%s: clock parse failed %d\n",
> __func__, err);
> - goto out;
> + goto dealloc_host;
> }
> err = ufshcd_parse_regulator_info(hba);
> if (err) {
> dev_err(&pdev->dev, "%s: regulator init failed %d\n",
> __func__, err);
> - goto out;
> + goto dealloc_host;
> }
>
> pm_runtime_set_active(&pdev->dev);
> @@ -352,50 +344,12 @@ static int ufshcd_pltfrm_probe(struct
> platform_device *pdev)
> out_disable_rpm:
> pm_runtime_disable(&pdev->dev);
> pm_runtime_set_suspended(&pdev->dev);
> +dealloc_host:
> + ufshcd_dealloc_host(hba);
> out:
> return err;
> }
> -
> -/**
> - * ufshcd_pltfrm_remove - remove platform driver routine
> - * @pdev: pointer to platform device handle
> - *
> - * Returns 0 on success, non-zero value on failure
> - */
> -static int ufshcd_pltfrm_remove(struct platform_device *pdev)
> -{
> - struct ufs_hba *hba = platform_get_drvdata(pdev);
> -
> - pm_runtime_get_sync(&(pdev)->dev);
> - ufshcd_remove(hba);
> - return 0;
> -}
> -
> -static const struct of_device_id ufs_of_match[] = {
> - { .compatible = "jedec,ufs-1.1"},
> - {},
> -};
> -
> -static const struct dev_pm_ops ufshcd_dev_pm_ops = {
> - .suspend = ufshcd_pltfrm_suspend,
> - .resume = ufshcd_pltfrm_resume,
> - .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
> - .runtime_resume = ufshcd_pltfrm_runtime_resume,
> - .runtime_idle = ufshcd_pltfrm_runtime_idle,
> -};
> -
> -static struct platform_driver ufshcd_pltfrm_driver = {
> - .probe = ufshcd_pltfrm_probe,
> - .remove = ufshcd_pltfrm_remove,
> - .shutdown = ufshcd_pltfrm_shutdown,
> - .driver = {
> - .name = "ufshcd",
> - .pm = &ufshcd_dev_pm_ops,
> - .of_match_table = ufs_of_match,
> - },
> -};
> -
> -module_platform_driver(ufshcd_pltfrm_driver);
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
>
> MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
> MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h
> b/drivers/scsi/ufs/ufshcd-pltfrm.h
> new file mode 100644
> index 0000000..df64c41
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
> @@ -0,0 +1,41 @@
> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef UFSHCD_PLTFRM_H_
> +#define UFSHCD_PLTFRM_H_
> +
> +#include "ufshcd.h"
> +
> +int ufshcd_pltfrm_init(struct platform_device *pdev,
> + struct ufs_hba_variant_ops *vops);
> +void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
> +
> +#ifdef CONFIG_PM
> +
> +int ufshcd_pltfrm_suspend(struct device *dev);
> +int ufshcd_pltfrm_resume(struct device *dev);
> +int ufshcd_pltfrm_runtime_suspend(struct device *dev);
> +int ufshcd_pltfrm_runtime_resume(struct device *dev);
> +int ufshcd_pltfrm_runtime_idle(struct device *dev);
> +
> +#else /* !CONFIG_PM */
> +
> +#define ufshcd_pltfrm_suspend NULL
> +#define ufshcd_pltfrm_resume NULL
> +#define ufshcd_pltfrm_runtime_suspend NULL
> +#define ufshcd_pltfrm_runtime_resume NULL
> +#define ufshcd_pltfrm_runtime_idle NULL
> +
> +#endif /* CONFIG_PM */
> +
> +#endif /* UFSHCD_PLTFRM_H_ */
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 9e79c33..2ef9834 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -5348,6 +5348,16 @@ void ufshcd_remove(struct ufs_hba *hba)
> EXPORT_SYMBOL_GPL(ufshcd_remove);
>
> /**
> + * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA)
> + * @hba: pointer to Host Bus Adapter (HBA)
> + */
> +void ufshcd_dealloc_host(struct ufs_hba *hba)
> +{
> + scsi_host_put(hba->host);
> +}
> +EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
> +
> +/**
> * ufshcd_set_dma_mask - Set dma mask based on the controller
> * addressing capability
> * @hba: per adapter instance
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index ce75626..f2aa47e 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -576,6 +576,7 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba,
> u32 mask, u32 val, u32 reg)
> }
>
> int ufshcd_alloc_host(struct device *, struct ufs_hba **);
> +void ufshcd_dealloc_host(struct ufs_hba *);
> int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
> void ufshcd_remove(struct ufs_hba *);
>
> --
> 1.8.5.2
>
> --
> QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Qualcomm Israel, on behalf of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v8 6/8] scsi: ufs: make the UFS variant a platform device
2015-10-25 10:50 ` [PATCH v8 6/8] scsi: ufs: make the UFS variant a platform device Yaniv Gardi
2015-10-27 15:04 ` Gilad Broner
@ 2015-10-27 19:25 ` Rob Herring
1 sibling, 0 replies; 3+ messages in thread
From: Rob Herring @ 2015-10-27 19:25 UTC (permalink / raw)
To: Yaniv Gardi
Cc: Jej B, Paul Bolle, hch, linux-kernel@vger.kernel.org, linux-scsi,
linux-arm-msm, Santosh Y, linux-scsi-owner, Subhash Jadavani,
Gilad Broner, Dolev Raviv, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, Vinayak Holikatti, James E.J. Bottomley,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
On Sun, Oct 25, 2015 at 5:50 AM, Yaniv Gardi <ygardi@codeaurora.org> wrote:
> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
> a platform device.
> In order to do so a few additional changes are required:
> 1. The ufshcd-pltfrm is no longer serves as a platform device.
> Now it only serves as a group of platform APIs such as PM APIs
> (runtime suspend/resume, system suspend/resume etc), parsers of
> clocks, regulators and pm_levels from DT.
> 2. What used to be the old platform "probe" is now "only"
> a pltfrm_init() routine, that does exactly the same, but only
> being called by the new probe function of the UFS variant.
>
> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
I already gave you a reviewed-by, so please include them when posting
new versions. (But no need to repost just to add them).
Rob
>
> ---
> Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 58 +++++++++++++
> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 11 ++-
> drivers/scsi/ufs/ufs-qcom.c | 62 +++++++++++++-
> drivers/scsi/ufs/ufshcd-pltfrm.c | 98 ++++++----------------
> drivers/scsi/ufs/ufshcd-pltfrm.h | 41 +++++++++
> drivers/scsi/ufs/ufshcd.c | 10 +++
> drivers/scsi/ufs/ufshcd.h | 1 +
> 7 files changed, 207 insertions(+), 74 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> create mode 100644 drivers/scsi/ufs/ufshcd-pltfrm.h
>
> diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> new file mode 100644
> index 0000000..070baf4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
> @@ -0,0 +1,58 @@
> +* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
> +
> +UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
> +Each UFS PHY node should have its own node.
> +
> +To bind UFS PHY with UFS host controller, the controller node should
> +contain a phandle reference to UFS PHY node.
> +
> +Required properties:
> +- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm"
> + or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
> +- reg : should contain PHY register address space (mandatory),
> +- reg-names : indicates various resources passed to driver (via reg proptery) by name.
> + Required "reg-names" is "phy_mem".
> +- #phy-cells : This property shall be set to 0
> +- vdda-phy-supply : phandle to main PHY supply for analog domain
> +- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
> +- clocks : List of phandle and clock specifier pairs
> +- clock-names : List of clock input name strings sorted in the same
> + order as the clocks property. "ref_clk_src", "ref_clk",
> + "tx_iface_clk" & "rx_iface_clk" are mandatory but
> + "ref_clk_parent" is optional
> +
> +Optional properties:
> +- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
> +- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
> +- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
> +- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
> +- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
> +
> +Example:
> +
> + ufsphy1: ufsphy@0xfc597000 {
> + compatible = "qcom,ufs-phy-qmp-20nm";
> + reg = <0xfc597000 0x800>;
> + reg-names = "phy_mem";
> + #phy-cells = <0>;
> + vdda-phy-supply = <&pma8084_l4>;
> + vdda-pll-supply = <&pma8084_l12>;
> + vdda-phy-max-microamp = <50000>;
> + vdda-pll-max-microamp = <1000>;
> + clock-names = "ref_clk_src",
> + "ref_clk_parent",
> + "ref_clk",
> + "tx_iface_clk",
> + "rx_iface_clk";
> + clocks = <&clock_rpm clk_ln_bb_clk>,
> + <&clock_gcc clk_pcie_1_phy_ldo >,
> + <&clock_gcc clk_ufs_phy_ldo>,
> + <&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
> + <&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
> + };
> +
> + ufshc@0xfc598000 {
> + ...
> + phys = <&ufsphy1>;
> + phy-names = "ufsphy";
> + };
> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> index 5357919..03c0e98 100644
> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> @@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
> Each UFS controller instance should have its own node.
>
> Required properties:
> -- compatible : compatible list, contains "jedec,ufs-1.1"
> +- compatible : must contain "jedec,ufs-1.1", may also list one or more
> + of the following:
> + "qcom,msm8994-ufshc"
> + "qcom,msm8996-ufshc"
> + "qcom,ufshc"
> - interrupts : <interrupt mapping for UFS host controller IRQ>
> - reg : <registers mapping>
>
> Optional properties:
> +- phys : phandle to UFS PHY node
> +- phy-names : the string "ufsphy" when is found in a node, along
> + with "phys" attribute, provides phandle to UFS PHY node
> - vdd-hba-supply : phandle to UFS host controller supply regulator node
> - vcc-supply : phandle to VCC supply regulator node
> - vccq-supply : phandle to VCCQ supply regulator node
> @@ -54,4 +61,6 @@ Example:
> clocks = <&core 0>, <&ref 0>, <&iface 0>;
> clock-names = "core_clk", "ref_clk", "iface_clk";
> freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
> + phys = <&ufsphy1>;
> + phy-names = "ufsphy";
> };
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 329ac84..b275a9a 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -19,6 +19,7 @@
>
> #include <linux/phy/phy-qcom-ufs.h>
> #include "ufshcd.h"
> +#include "ufshcd-pltfrm.h"
> #include "unipro.h"
> #include "ufs-qcom.h"
> #include "ufshci.h"
> @@ -1036,7 +1037,7 @@ void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
> * The variant operations configure the necessary controller and PHY
> * handshake during initialization.
> */
> -static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> +static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> .name = "qcom",
> .init = ufs_qcom_init,
> .exit = ufs_qcom_exit,
> @@ -1050,4 +1051,63 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
> .resume = ufs_qcom_resume,
> };
>
> +/**
> + * ufs_qcom_probe - probe routine of the driver
> + * @pdev: pointer to Platform device handle
> + *
> + * Return zero for success and non-zero for failure
> + */
> +static int ufs_qcom_probe(struct platform_device *pdev)
> +{
> + int err;
> + struct device *dev = &pdev->dev;
> +
> + /* Perform generic probe */
> + err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
> + if (err)
> + dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
> +
> + return err;
> +}
> +
> +/**
> + * ufs_qcom_remove - set driver_data of the device to NULL
> + * @pdev: pointer to platform device handle
> + *
> + * Always return 0
> + */
> +static int ufs_qcom_remove(struct platform_device *pdev)
> +{
> + struct ufs_hba *hba = platform_get_drvdata(pdev);
> +
> + pm_runtime_get_sync(&(pdev)->dev);
> + ufshcd_remove(hba);
> + return 0;
> +}
> +
> +static const struct of_device_id ufs_qcom_of_match[] = {
> + { .compatible = "qcom,ufshc"},
> + {},
> +};
> +
> +static const struct dev_pm_ops ufs_qcom_pm_ops = {
> + .suspend = ufshcd_pltfrm_suspend,
> + .resume = ufshcd_pltfrm_resume,
> + .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
> + .runtime_resume = ufshcd_pltfrm_runtime_resume,
> + .runtime_idle = ufshcd_pltfrm_runtime_idle,
> +};
> +
> +static struct platform_driver ufs_qcom_pltform = {
> + .probe = ufs_qcom_probe,
> + .remove = ufs_qcom_remove,
> + .shutdown = ufshcd_pltfrm_shutdown,
> + .driver = {
> + .name = "ufshcd-qcom",
> + .pm = &ufs_qcom_pm_ops,
> + .of_match_table = of_match_ptr(ufs_qcom_of_match),
> + },
> +};
> +module_platform_driver(ufs_qcom_pltform);
> +
> MODULE_LICENSE("GPL v2");
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
> index 7db9564..9714f2a 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -38,20 +38,7 @@
> #include <linux/of.h>
>
> #include "ufshcd.h"
> -
> -static const struct of_device_id ufs_of_match[];
> -static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
> -{
> - if (dev->of_node) {
> - const struct of_device_id *match;
> -
> - match = of_match_node(ufs_of_match, dev->of_node);
> - if (match)
> - return (struct ufs_hba_variant_ops *)match->data;
> - }
> -
> - return NULL;
> -}
> +#include "ufshcd-pltfrm.h"
>
> static int ufshcd_parse_clock_info(struct ufs_hba *hba)
> {
> @@ -245,10 +232,11 @@ out:
> * Returns 0 if successful
> * Returns non-zero otherwise
> */
> -static int ufshcd_pltfrm_suspend(struct device *dev)
> +int ufshcd_pltfrm_suspend(struct device *dev)
> {
> return ufshcd_system_suspend(dev_get_drvdata(dev));
> }
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_suspend);
>
> /**
> * ufshcd_pltfrm_resume - resume power management function
> @@ -257,43 +245,47 @@ static int ufshcd_pltfrm_suspend(struct device *dev)
> * Returns 0 if successful
> * Returns non-zero otherwise
> */
> -static int ufshcd_pltfrm_resume(struct device *dev)
> +int ufshcd_pltfrm_resume(struct device *dev)
> {
> return ufshcd_system_resume(dev_get_drvdata(dev));
> }
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume);
>
> -static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> +int ufshcd_pltfrm_runtime_suspend(struct device *dev)
> {
> return ufshcd_runtime_suspend(dev_get_drvdata(dev));
> }
> -static int ufshcd_pltfrm_runtime_resume(struct device *dev)
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_suspend);
> +
> +int ufshcd_pltfrm_runtime_resume(struct device *dev)
> {
> return ufshcd_runtime_resume(dev_get_drvdata(dev));
> }
> -static int ufshcd_pltfrm_runtime_idle(struct device *dev)
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_resume);
> +
> +int ufshcd_pltfrm_runtime_idle(struct device *dev)
> {
> return ufshcd_runtime_idle(dev_get_drvdata(dev));
> }
> -#else /* !CONFIG_PM */
> -#define ufshcd_pltfrm_suspend NULL
> -#define ufshcd_pltfrm_resume NULL
> -#define ufshcd_pltfrm_runtime_suspend NULL
> -#define ufshcd_pltfrm_runtime_resume NULL
> -#define ufshcd_pltfrm_runtime_idle NULL
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle);
> +
> #endif /* CONFIG_PM */
>
> -static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> +void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
> {
> ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
> }
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown);
>
> /**
> - * ufshcd_pltfrm_probe - probe routine of the driver
> + * ufshcd_pltfrm_init - probe routine of the driver
> * @pdev: pointer to Platform device handle
> + * @vops: pointer to variant ops
> *
> * Returns 0 on success, non-zero value on failure
> */
> -static int ufshcd_pltfrm_probe(struct platform_device *pdev)
> +int ufshcd_pltfrm_init(struct platform_device *pdev,
> + struct ufs_hba_variant_ops *vops)
> {
> struct ufs_hba *hba;
> void __iomem *mmio_base;
> @@ -321,19 +313,19 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
> goto out;
> }
>
> - hba->vops = get_variant_ops(&pdev->dev);
> + hba->vops = vops;
>
> err = ufshcd_parse_clock_info(hba);
> if (err) {
> dev_err(&pdev->dev, "%s: clock parse failed %d\n",
> __func__, err);
> - goto out;
> + goto dealloc_host;
> }
> err = ufshcd_parse_regulator_info(hba);
> if (err) {
> dev_err(&pdev->dev, "%s: regulator init failed %d\n",
> __func__, err);
> - goto out;
> + goto dealloc_host;
> }
>
> pm_runtime_set_active(&pdev->dev);
> @@ -352,50 +344,12 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev)
> out_disable_rpm:
> pm_runtime_disable(&pdev->dev);
> pm_runtime_set_suspended(&pdev->dev);
> +dealloc_host:
> + ufshcd_dealloc_host(hba);
> out:
> return err;
> }
> -
> -/**
> - * ufshcd_pltfrm_remove - remove platform driver routine
> - * @pdev: pointer to platform device handle
> - *
> - * Returns 0 on success, non-zero value on failure
> - */
> -static int ufshcd_pltfrm_remove(struct platform_device *pdev)
> -{
> - struct ufs_hba *hba = platform_get_drvdata(pdev);
> -
> - pm_runtime_get_sync(&(pdev)->dev);
> - ufshcd_remove(hba);
> - return 0;
> -}
> -
> -static const struct of_device_id ufs_of_match[] = {
> - { .compatible = "jedec,ufs-1.1"},
> - {},
> -};
> -
> -static const struct dev_pm_ops ufshcd_dev_pm_ops = {
> - .suspend = ufshcd_pltfrm_suspend,
> - .resume = ufshcd_pltfrm_resume,
> - .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
> - .runtime_resume = ufshcd_pltfrm_runtime_resume,
> - .runtime_idle = ufshcd_pltfrm_runtime_idle,
> -};
> -
> -static struct platform_driver ufshcd_pltfrm_driver = {
> - .probe = ufshcd_pltfrm_probe,
> - .remove = ufshcd_pltfrm_remove,
> - .shutdown = ufshcd_pltfrm_shutdown,
> - .driver = {
> - .name = "ufshcd",
> - .pm = &ufshcd_dev_pm_ops,
> - .of_match_table = ufs_of_match,
> - },
> -};
> -
> -module_platform_driver(ufshcd_pltfrm_driver);
> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
>
> MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
> MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h
> new file mode 100644
> index 0000000..df64c41
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
> @@ -0,0 +1,41 @@
> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef UFSHCD_PLTFRM_H_
> +#define UFSHCD_PLTFRM_H_
> +
> +#include "ufshcd.h"
> +
> +int ufshcd_pltfrm_init(struct platform_device *pdev,
> + struct ufs_hba_variant_ops *vops);
> +void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
> +
> +#ifdef CONFIG_PM
> +
> +int ufshcd_pltfrm_suspend(struct device *dev);
> +int ufshcd_pltfrm_resume(struct device *dev);
> +int ufshcd_pltfrm_runtime_suspend(struct device *dev);
> +int ufshcd_pltfrm_runtime_resume(struct device *dev);
> +int ufshcd_pltfrm_runtime_idle(struct device *dev);
> +
> +#else /* !CONFIG_PM */
> +
> +#define ufshcd_pltfrm_suspend NULL
> +#define ufshcd_pltfrm_resume NULL
> +#define ufshcd_pltfrm_runtime_suspend NULL
> +#define ufshcd_pltfrm_runtime_resume NULL
> +#define ufshcd_pltfrm_runtime_idle NULL
> +
> +#endif /* CONFIG_PM */
> +
> +#endif /* UFSHCD_PLTFRM_H_ */
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 9e79c33..2ef9834 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -5348,6 +5348,16 @@ void ufshcd_remove(struct ufs_hba *hba)
> EXPORT_SYMBOL_GPL(ufshcd_remove);
>
> /**
> + * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA)
> + * @hba: pointer to Host Bus Adapter (HBA)
> + */
> +void ufshcd_dealloc_host(struct ufs_hba *hba)
> +{
> + scsi_host_put(hba->host);
> +}
> +EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
> +
> +/**
> * ufshcd_set_dma_mask - Set dma mask based on the controller
> * addressing capability
> * @hba: per adapter instance
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index ce75626..f2aa47e 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -576,6 +576,7 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
> }
>
> int ufshcd_alloc_host(struct device *, struct ufs_hba **);
> +void ufshcd_dealloc_host(struct ufs_hba *);
> int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
> void ufshcd_remove(struct ufs_hba *);
>
> --
> 1.8.5.2
>
> --
> QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread