Re: [PATCH v3 3/4] soc: imx: imx8m-blk-ctrl: Scan subnodes and bind drivers to them

[Lucas Stach <l.stach@pengutronix.de>]

Hi Marek,

Am Dienstag, dem 21.02.2023 um 16:28 +0100 schrieb Marek Vasut:
> This particular block can have DT subnodes describing the LVDS LDB
> bridge. Instead of misusing simple-bus to scan for those nodes, do
> the scan within the driver.
> 
> Reviewed-by: Liu Ying <victor.liu@nxp.com>
> Fixes: 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes")
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Paul Elder <paul.elder@ideasonboard.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> ---
> V2: - Turn this into 3/4
>     - Warn and continue in case of error
> V3: Add RB from Liu
> ---
>  drivers/soc/imx/imx8m-blk-ctrl.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index 399cb85105a18..4f5736e612fb0 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -169,7 +169,9 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
>  {
>  	const struct imx8m_blk_ctrl_data *bc_data;
>  	struct device *dev = &pdev->dev;
> +	struct platform_device *child;
>  	struct imx8m_blk_ctrl *bc;
> +	struct device_node *np;
>  	void __iomem *base;
>  	int i, ret;
>  
> @@ -310,6 +312,13 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
>  
>  	dev_set_drvdata(dev, bc);
>  
> +	for_each_child_of_node(dev->of_node, np) {
> +		child = of_platform_device_create(np, NULL, dev);
> +		if (child)
> +			continue;
> +		dev_warn(dev, "failed to create device for %pOF\n", np);
> +	}

Any reason for not using devm_of_platform_populate() instead?

Regards,
Lucas

> +
>  	return 0;
>  
>  cleanup_provider: