Re: [PATCH 1/2] dt-bindings: net: dsa: split generic port definition from dsa.yaml

[Ansuel Smith <ansuelsmth@gmail.com>]

On Mon, Nov 29, 2021 at 03:18:54PM -0600, Rob Herring wrote:
> On Fri, Nov 12, 2021 at 05:57:51PM +0100, Ansuel Smith wrote:
> > Some switch may require to add additional binding to the node port.
> > Move DSA generic port definition to a dedicated yaml to permit this.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  .../devicetree/bindings/net/dsa/dsa-port.yaml | 70 +++++++++++++++++++
> >  .../devicetree/bindings/net/dsa/dsa.yaml      | 54 +-------------
> >  2 files changed, 72 insertions(+), 52 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > new file mode 100644
> > index 000000000000..258df41c9133
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > @@ -0,0 +1,70 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Ethernet Switch port Device Tree Bindings
> > +
> > +maintainers:
> > +  - Andrew Lunn <andrew@lunn.ch>
> > +  - Florian Fainelli <f.fainelli@gmail.com>
> > +  - Vivien Didelot <vivien.didelot@gmail.com>
> > +
> > +description:
> > +  Ethernet switch port Description
> > +
> > +properties:
> > +  reg:
> > +    description: Port number
> > +
> > +  label:
> > +    description:
> > +      Describes the label associated with this port, which will become
> > +      the netdev name
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +
> > +  link:
> > +    description:
> > +      Should be a list of phandles to other switch's DSA port. This
> > +      port is used as the outgoing port towards the phandle ports. The
> > +      full routing information must be given, not just the one hop
> > +      routes to neighbouring switches
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +
> > +  ethernet:
> > +    description:
> > +      Should be a phandle to a valid Ethernet device node.  This host
> > +      device is what the switch port is connected to
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  dsa-tag-protocol:
> > +    description:
> > +      Instead of the default, the switch will use this tag protocol if
> > +      possible. Useful when a device supports multiple protocols and
> > +      the default is incompatible with the Ethernet device.
> > +    enum:
> > +      - dsa
> > +      - edsa
> > +      - ocelot
> > +      - ocelot-8021q
> > +      - seville
> > +
> > +  phy-handle: true
> > +
> > +  phy-mode: true
> > +
> > +  fixed-link: true
> > +
> > +  mac-address: true
> > +
> > +  sfp: true
> > +
> > +  managed: true
> > +
> > +required:
> > +  - reg
> > +
> > +additionalProperties: true
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> > index 224cfa45de9a..15ea9ef3def9 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
> > @@ -46,58 +46,8 @@ patternProperties:
> >          type: object
> >          description: Ethernet switch ports
> >  
> > -        properties:
> > -          reg:
> > -            description: Port number
> > -
> > -          label:
> > -            description:
> > -              Describes the label associated with this port, which will become
> > -              the netdev name
> > -            $ref: /schemas/types.yaml#/definitions/string
> > -
> > -          link:
> > -            description:
> > -              Should be a list of phandles to other switch's DSA port. This
> > -              port is used as the outgoing port towards the phandle ports. The
> > -              full routing information must be given, not just the one hop
> > -              routes to neighbouring switches
> > -            $ref: /schemas/types.yaml#/definitions/phandle-array
> > -
> > -          ethernet:
> > -            description:
> > -              Should be a phandle to a valid Ethernet device node.  This host
> > -              device is what the switch port is connected to
> > -            $ref: /schemas/types.yaml#/definitions/phandle
> > -
> > -          dsa-tag-protocol:
> > -            description:
> > -              Instead of the default, the switch will use this tag protocol if
> > -              possible. Useful when a device supports multiple protocols and
> > -              the default is incompatible with the Ethernet device.
> > -            enum:
> > -              - dsa
> > -              - edsa
> > -              - ocelot
> > -              - ocelot-8021q
> > -              - seville
> > -
> > -          phy-handle: true
> > -
> > -          phy-mode: true
> > -
> > -          fixed-link: true
> > -
> > -          mac-address: true
> > -
> > -          sfp: true
> > -
> > -          managed: true
> > -
> > -        required:
> > -          - reg
> > -
> > -        additionalProperties: false
> > +        allOf:
> > +          - $ref: dsa-port.yaml#
> 
> Don't need 'allOf' here. And you need to add 'unevaluatedProperties: 
> false'. With that,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> (This needs to go in net-next to avoid conflicts, but given the 
> maintainers didn't apply it already unreviewed they probably expect I 
> will apply it.)

If you want I can push a v2 with the net-next tag.

-- 
	Ansuel