* [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family
@ 2023-05-26 15:31 Devi Priya
2023-05-26 15:31 ` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on " Devi Priya
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Devi Priya @ 2023-05-26 15:31 UTC (permalink / raw)
To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, linux-arm-msm, devicetree, linux-kernel
Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma,
quic_anusha
Add the initial device tree support for the Reference Design
Platform(RDP) 453 based on IPQ9574 family of SoCs. This patch series adds
support for Console UART, SPI NOR and SMPA1 regulator node.
The series depends on the below patch sets which adds support for
SPI NOR and SMPA1 regulator nodes.
https://lore.kernel.org/linux-arm-msm/20230329053726.14860-3-quic_kathirav@quicinc.com/
https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/
Devi Priya (2):
dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family
arm64: dts: qcom: ipq9574: add support for RDP453 variant
.../devicetree/bindings/arm/qcom.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 80 +++++++++++++++++++
3 files changed, 83 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
--
2.17.1
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family 2023-05-26 15:31 [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Devi Priya @ 2023-05-26 15:31 ` Devi Priya 2023-05-26 18:50 ` Conor Dooley 2023-05-26 15:31 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant Devi Priya 2023-05-26 19:38 ` [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Bjorn Andersson 2 siblings, 1 reply; 7+ messages in thread From: Devi Priya @ 2023-05-26 15:31 UTC (permalink / raw) To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha Document AL02-C8 (Reference Design Platform 453) board based on IPQ9574 family of SoCs. Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> --- Documentation/devicetree/bindings/arm/qcom.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index fe7ed853e598..888cb8bfd0cd 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -88,6 +88,7 @@ description: | ap-al02-c2 ap-al02-c6 ap-al02-c7 + ap-al02-c8 ap-al02-c9 ap-mi01.2 ap-mi01.6 @@ -357,6 +358,7 @@ properties: - qcom,ipq9574-ap-al02-c2 - qcom,ipq9574-ap-al02-c6 - qcom,ipq9574-ap-al02-c7 + - qcom,ipq9574-ap-al02-c8 - qcom,ipq9574-ap-al02-c9 - const: qcom,ipq9574 -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family 2023-05-26 15:31 ` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on " Devi Priya @ 2023-05-26 18:50 ` Conor Dooley 0 siblings, 0 replies; 7+ messages in thread From: Conor Dooley @ 2023-05-26 18:50 UTC (permalink / raw) To: Devi Priya Cc: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel, quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha [-- Attachment #1: Type: text/plain, Size: 290 bytes --] On Fri, May 26, 2023 at 09:01:51PM +0530, Devi Priya wrote: > Document AL02-C8 (Reference Design Platform 453) board based on IPQ9574 > family of SoCs. > > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Thanks, Conor. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant 2023-05-26 15:31 [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Devi Priya 2023-05-26 15:31 ` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on " Devi Priya @ 2023-05-26 15:31 ` Devi Priya 2023-05-26 20:45 ` Konrad Dybcio 2023-05-26 19:38 ` [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Bjorn Andersson 2 siblings, 1 reply; 7+ messages in thread From: Devi Priya @ 2023-05-26 15:31 UTC (permalink / raw) To: agross, andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha Add the initial device tree support for the Reference Design Platform (RDP) 453 based on IPQ9574 family of SoCs. This patch adds support for Console UART, SPI NOR and SMPA1 regulator node. Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 80 +++++++++++++++++++++ 2 files changed, 81 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 834e790bec90..56ec3d84ad43 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts new file mode 100644 index 000000000000..f01de6628c3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP453 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant 2023-05-26 15:31 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant Devi Priya @ 2023-05-26 20:45 ` Konrad Dybcio 2023-06-03 7:51 ` Devi Priya 0 siblings, 1 reply; 7+ messages in thread From: Konrad Dybcio @ 2023-05-26 20:45 UTC (permalink / raw) To: Devi Priya, agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha On 26.05.2023 17:31, Devi Priya wrote: > Add the initial device tree support for the Reference Design Platform (RDP) > 453 based on IPQ9574 family of SoCs. This patch adds support for Console > UART, SPI NOR and SMPA1 regulator node. > > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> BTW what's the naming scheme for IPQ? IPQabcd 'a' - tier 'b' - 0/5 - network generation dependent? 'cd' - model ? Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 80 +++++++++++++++++++++ > 2 files changed, 81 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 834e790bec90..56ec3d84ad43 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts > new file mode 100644 > index 000000000000..f01de6628c3b > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts > @@ -0,0 +1,80 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * IPQ9574 RDP453 board device tree source > + * > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq9574.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; > + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; > + > + aliases { > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_spi0 { > + pinctrl-0 = <&spi_0_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + > + flash@0 { > + compatible = "micron,n25q128a11", "jedec,spi-nor"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <50000000>; > + }; > +}; > + > +&blsp1_uart2 { > + pinctrl-0 = <&uart2_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&rpm_requests { > + regulators { > + compatible = "qcom,rpm-mp5496-regulators"; > + > + ipq9574_s1: s1 { > + /* > + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. > + * During regulator registration, kernel not knowing the initial voltage, > + * considers it as zero and brings up the regulators with minimum supported voltage. > + * Update the regulator-min-microvolt with SVS voltage of 725mV so that > + * the regulators are brought up with 725mV which is sufficient for all the > + * corner parts to operate at 800MHz > + */ > + regulator-min-microvolt = <725000>; > + regulator-max-microvolt = <1075000>; > + }; > + }; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&tlmm { > + spi_0_pins: spi-0-state { > + pins = "gpio11", "gpio12", "gpio13", "gpio14"; > + function = "blsp0_spi"; > + drive-strength = <8>; > + bias-disable; > + }; > +}; > + > +&xo_board_clk { > + clock-frequency = <24000000>; > +}; ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant 2023-05-26 20:45 ` Konrad Dybcio @ 2023-06-03 7:51 ` Devi Priya 0 siblings, 0 replies; 7+ messages in thread From: Devi Priya @ 2023-06-03 7:51 UTC (permalink / raw) To: Konrad Dybcio, agross, andersson, robh+dt, krzysztof.kozlowski+dt, conor+dt, linux-arm-msm, devicetree, linux-kernel Cc: quic_srichara, quic_sjaganat, quic_kathirav, quic_arajkuma, quic_anusha On 5/27/2023 2:15 AM, Konrad Dybcio wrote: > > > On 26.05.2023 17:31, Devi Priya wrote: >> Add the initial device tree support for the Reference Design Platform (RDP) >> 453 based on IPQ9574 family of SoCs. This patch adds support for Console >> UART, SPI NOR and SMPA1 regulator node. >> >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >> --- > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > > BTW what's the naming scheme for IPQ? > > IPQabcd > > 'a' - tier > 'b' - 0/5 - network generation dependent? > 'cd' - model > > ? > Hi konrad, Below is the naming scheme, IPQabcd a-> product category(5-Immersive home, 6-Home, 9-Networking Pro) b-> generation (5-Alder) c-> SKU customization (0-base SKU) d-> #chains Thanks, Devi Priya > Konrad >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 80 +++++++++++++++++++++ >> 2 files changed, 81 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 834e790bec90..56ec3d84ad43 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts >> new file mode 100644 >> index 000000000000..f01de6628c3b >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts >> @@ -0,0 +1,80 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ9574 RDP453 board device tree source >> + * >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq9574.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; >> + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; >> + >> + aliases { >> + serial0 = &blsp1_uart2; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_spi0 { >> + pinctrl-0 = <&spi_0_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> + >> + flash@0 { >> + compatible = "micron,n25q128a11", "jedec,spi-nor"; >> + reg = <0>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + spi-max-frequency = <50000000>; >> + }; >> +}; >> + >> +&blsp1_uart2 { >> + pinctrl-0 = <&uart2_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&rpm_requests { >> + regulators { >> + compatible = "qcom,rpm-mp5496-regulators"; >> + >> + ipq9574_s1: s1 { >> + /* >> + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. >> + * During regulator registration, kernel not knowing the initial voltage, >> + * considers it as zero and brings up the regulators with minimum supported voltage. >> + * Update the regulator-min-microvolt with SVS voltage of 725mV so that >> + * the regulators are brought up with 725mV which is sufficient for all the >> + * corner parts to operate at 800MHz >> + */ >> + regulator-min-microvolt = <725000>; >> + regulator-max-microvolt = <1075000>; >> + }; >> + }; >> +}; >> + >> +&sleep_clk { >> + clock-frequency = <32000>; >> +}; >> + >> +&tlmm { >> + spi_0_pins: spi-0-state { >> + pins = "gpio11", "gpio12", "gpio13", "gpio14"; >> + function = "blsp0_spi"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> +}; >> + >> +&xo_board_clk { >> + clock-frequency = <24000000>; >> +}; ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family 2023-05-26 15:31 [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Devi Priya 2023-05-26 15:31 ` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on " Devi Priya 2023-05-26 15:31 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant Devi Priya @ 2023-05-26 19:38 ` Bjorn Andersson 2 siblings, 0 replies; 7+ messages in thread From: Bjorn Andersson @ 2023-05-26 19:38 UTC (permalink / raw) To: agross, devicetree, konrad.dybcio, linux-kernel, conor+dt, robh+dt, krzysztof.kozlowski+dt, linux-arm-msm, Devi Priya Cc: quic_kathirav, quic_anusha, quic_sjaganat, quic_srichara, quic_arajkuma On Fri, 26 May 2023 21:01:50 +0530, Devi Priya wrote: > Add the initial device tree support for the Reference Design > Platform(RDP) 453 based on IPQ9574 family of SoCs. This patch series adds > support for Console UART, SPI NOR and SMPA1 regulator node. > > The series depends on the below patch sets which adds support for > SPI NOR and SMPA1 regulator nodes. > https://lore.kernel.org/linux-arm-msm/20230329053726.14860-3-quic_kathirav@quicinc.com/ > https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/ > > [...] Applied, thanks! [1/2] dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family commit: b866fba43698479fef5dd301313e8a73e28c789e [2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant commit: 8a465494d62215ca531dfa0cde993779a77e61aa Best regards, -- Bjorn Andersson <andersson@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-06-03 7:52 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-05-26 15:31 [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Devi Priya 2023-05-26 15:31 ` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C8 board based on " Devi Priya 2023-05-26 18:50 ` Conor Dooley 2023-05-26 15:31 ` [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP453 variant Devi Priya 2023-05-26 20:45 ` Konrad Dybcio 2023-06-03 7:51 ` Devi Priya 2023-05-26 19:38 ` [PATCH 0/2] Add initial support for RDP453 of IPQ9574 family Bjorn Andersson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).