From: Matthias Brugger <matthias.bgg@gmail.com>
To: Sean Wang <sean.wang@mediatek.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Ryder Lee <ryder.lee@mediatek.com>
Subject: Re: [PATCH 2/2] arm64: dts: mt7622: add audio related device nodes
Date: Fri, 11 May 2018 18:56:00 +0200 [thread overview]
Message-ID: <626c6741-00cd-c125-07f9-cfbbdbe36db4@gmail.com> (raw)
In-Reply-To: <1525233238.14792.14.camel@mtkswgap22>
On 05/02/2018 05:53 AM, Sean Wang wrote:
> Hi, Matthias
>
> On Wed, 2018-05-02 at 11:41 +0800, sean.wang@mediatek.com wrote:
>> From: Ryder Lee <ryder.lee@mediatek.com>
>>
>> Add audio device nodes and its proper setup for all used pins
>>
>> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
>> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
>> ---
>> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 11 +++-
>> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 89 ++++++++++++++++++++++++++++
>> 2 files changed, 98 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
>> index 45d8655..b783764 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
>> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
>> @@ -18,7 +18,7 @@
>> compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
>>
>> chosen {
>> - bootargs = "console=ttyS0,115200n1";
>> + bootargs = "console=ttyS0,115200n1 swiotlb=512";
>> };
>>
>> cpus {
>> @@ -163,10 +163,17 @@
>> i2s1_pins: i2s1-pins {
>> mux {
>> function = "i2s";
>> - groups = "i2s_out_bclk_ws_mclk",
>> + groups = "i2s_out_mclk_bclk_ws",
>
> The old one ("i2s_out_bclk_ws_mclk") should be the indecisive value when
> I initially worked on the pinctrl device.
>
> It has to be corrected with "i2s_out_mclk_bclk_ws" to comply with the
> final dt-bindings.
>
>> "i2s1_in_data",
>> "i2s1_out_data";
>> };
>> +
>> + conf {
>> + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
>> + "I2S_WS", "I2S_MCLK";
>> + drive-strength = <12>;
>> + bias-pull-down;
>> + };
>> };
>>
>> irrx_pins: irrx-pins {
>> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>> index 6bbabb6..9213c96 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
>> @@ -527,6 +527,95 @@
>> status = "disabled";
>> };
>>
>> + audsys: clock-controller@11220000 {
>> + compatible = "mediatek,mt7622-audsys", "syscon";
>> + reg = <0 0x11220000 0 0x2000>;
>> + #clock-cells = <1>;
>
> The binding have been through broonie/sound.git around a week ago
>
Thanks for the clarifications!
Pushed to v4.17-next/dts64
Regards,
Matthias
>> +
>> + afe: audio-controller {
>> + compatible = "mediatek,mt7622-audio";
>> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
>> + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
>> + interrupt-names = "afe", "asys";
>> +
>> + clocks = <&infracfg CLK_INFRA_AUDIO_PD>,
>> + <&topckgen CLK_TOP_AUD1_SEL>,
>> + <&topckgen CLK_TOP_AUD2_SEL>,
>> + <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>,
>> + <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>,
>> + <&topckgen CLK_TOP_I2S0_MCK_SEL>,
>> + <&topckgen CLK_TOP_I2S1_MCK_SEL>,
>> + <&topckgen CLK_TOP_I2S2_MCK_SEL>,
>> + <&topckgen CLK_TOP_I2S3_MCK_SEL>,
>> + <&topckgen CLK_TOP_I2S0_MCK_DIV>,
>> + <&topckgen CLK_TOP_I2S1_MCK_DIV>,
>> + <&topckgen CLK_TOP_I2S2_MCK_DIV>,
>> + <&topckgen CLK_TOP_I2S3_MCK_DIV>,
>> + <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>,
>> + <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>,
>> + <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>,
>> + <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>,
>> + <&audsys CLK_AUDIO_I2SO1>,
>> + <&audsys CLK_AUDIO_I2SO2>,
>> + <&audsys CLK_AUDIO_I2SO3>,
>> + <&audsys CLK_AUDIO_I2SO4>,
>> + <&audsys CLK_AUDIO_I2SIN1>,
>> + <&audsys CLK_AUDIO_I2SIN2>,
>> + <&audsys CLK_AUDIO_I2SIN3>,
>> + <&audsys CLK_AUDIO_I2SIN4>,
>> + <&audsys CLK_AUDIO_ASRCO1>,
>> + <&audsys CLK_AUDIO_ASRCO2>,
>> + <&audsys CLK_AUDIO_ASRCO3>,
>> + <&audsys CLK_AUDIO_ASRCO4>,
>> + <&audsys CLK_AUDIO_AFE>,
>> + <&audsys CLK_AUDIO_AFE_CONN>,
>> + <&audsys CLK_AUDIO_A1SYS>,
>> + <&audsys CLK_AUDIO_A2SYS>;
>> +
>> + clock-names = "infra_sys_audio_clk",
>> + "top_audio_mux1_sel",
>> + "top_audio_mux2_sel",
>> + "top_audio_a1sys_hp",
>> + "top_audio_a2sys_hp",
>> + "i2s0_src_sel",
>> + "i2s1_src_sel",
>> + "i2s2_src_sel",
>> + "i2s3_src_sel",
>> + "i2s0_src_div",
>> + "i2s1_src_div",
>> + "i2s2_src_div",
>> + "i2s3_src_div",
>> + "i2s0_mclk_en",
>> + "i2s1_mclk_en",
>> + "i2s2_mclk_en",
>> + "i2s3_mclk_en",
>> + "i2so0_hop_ck",
>> + "i2so1_hop_ck",
>> + "i2so2_hop_ck",
>> + "i2so3_hop_ck",
>> + "i2si0_hop_ck",
>> + "i2si1_hop_ck",
>> + "i2si2_hop_ck",
>> + "i2si3_hop_ck",
>> + "asrc0_out_ck",
>> + "asrc1_out_ck",
>> + "asrc2_out_ck",
>> + "asrc3_out_ck",
>> + "audio_afe_pd",
>> + "audio_afe_conn_pd",
>> + "audio_a1sys_pd",
>> + "audio_a2sys_pd";
>> +
>> + assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>,
>> + <&topckgen CLK_TOP_A2SYS_HP_SEL>,
>> + <&topckgen CLK_TOP_A1SYS_HP_DIV>,
>> + <&topckgen CLK_TOP_A2SYS_HP_DIV>;
>> + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>,
>> + <&topckgen CLK_TOP_AUD2PLL>;
>> + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
>> + };
>> + };
>> +
>> mmc0: mmc@11230000 {
>> compatible = "mediatek,mt7622-mmc";
>> reg = <0 0x11230000 0 0x1000>;
>
>
prev parent reply other threads:[~2018-05-11 16:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-02 3:41 [PATCH 1/2] arm64: dts: mt7622: add High-Speed DMA device nodes sean.wang
2018-05-02 3:41 ` [PATCH 2/2] arm64: dts: mt7622: add audio related " sean.wang
2018-05-02 3:53 ` Sean Wang
2018-05-11 16:56 ` Matthias Brugger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=626c6741-00cd-c125-07f9-cfbbdbe36db4@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).