* [PATCH 1/2] arm64: dts: mt7622: add High-Speed DMA device nodes @ 2018-05-02 3:41 sean.wang 2018-05-02 3:41 ` [PATCH 2/2] arm64: dts: mt7622: add audio related " sean.wang 0 siblings, 1 reply; 4+ messages in thread From: sean.wang @ 2018-05-02 3:41 UTC (permalink / raw) To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-kernel, Sean Wang From: Sean Wang <sean.wang@mediatek.com> add High-Speed DMA (HSDMA) nodes Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index e9d5130..6bbabb6 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -735,6 +735,16 @@ #reset-cells = <1>; }; + hsdma: dma-controller@1b007000 { + compatible = "mediatek,mt7622-hsdma"; + reg = <0 0x1b007000 0 0x1000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETH_HSDMA_EN>; + clock-names = "hsdma"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + #dma-cells = <1>; + }; + eth: ethernet@1b100000 { compatible = "mediatek,mt7622-eth", "mediatek,mt2701-eth", -- 2.7.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] arm64: dts: mt7622: add audio related device nodes 2018-05-02 3:41 [PATCH 1/2] arm64: dts: mt7622: add High-Speed DMA device nodes sean.wang @ 2018-05-02 3:41 ` sean.wang 2018-05-02 3:53 ` Sean Wang 0 siblings, 1 reply; 4+ messages in thread From: sean.wang @ 2018-05-02 3:41 UTC (permalink / raw) To: robh+dt, matthias.bgg, mark.rutland, devicetree, linux-mediatek Cc: linux-arm-kernel, linux-kernel, Ryder Lee, Sean Wang From: Ryder Lee <ryder.lee@mediatek.com> Add audio device nodes and its proper setup for all used pins Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 11 +++- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 89 ++++++++++++++++++++++++++++ 2 files changed, 98 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 45d8655..b783764 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -18,7 +18,7 @@ compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; chosen { - bootargs = "console=ttyS0,115200n1"; + bootargs = "console=ttyS0,115200n1 swiotlb=512"; }; cpus { @@ -163,10 +163,17 @@ i2s1_pins: i2s1-pins { mux { function = "i2s"; - groups = "i2s_out_bclk_ws_mclk", + groups = "i2s_out_mclk_bclk_ws", "i2s1_in_data", "i2s1_out_data"; }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; }; irrx_pins: irrx-pins { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 6bbabb6..9213c96 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -527,6 +527,95 @@ status = "disabled"; }; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt7622-audio"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + + clocks = <&infracfg CLK_INFRA_AUDIO_PD>, + <&topckgen CLK_TOP_AUD1_SEL>, + <&topckgen CLK_TOP_AUD2_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>, + <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>, + <&topckgen CLK_TOP_I2S0_MCK_SEL>, + <&topckgen CLK_TOP_I2S1_MCK_SEL>, + <&topckgen CLK_TOP_I2S2_MCK_SEL>, + <&topckgen CLK_TOP_I2S3_MCK_SEL>, + <&topckgen CLK_TOP_I2S0_MCK_DIV>, + <&topckgen CLK_TOP_I2S1_MCK_DIV>, + <&topckgen CLK_TOP_I2S2_MCK_DIV>, + <&topckgen CLK_TOP_I2S3_MCK_DIV>, + <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>, + <&audsys CLK_AUDIO_I2SO1>, + <&audsys CLK_AUDIO_I2SO2>, + <&audsys CLK_AUDIO_I2SO3>, + <&audsys CLK_AUDIO_I2SO4>, + <&audsys CLK_AUDIO_I2SIN1>, + <&audsys CLK_AUDIO_I2SIN2>, + <&audsys CLK_AUDIO_I2SIN3>, + <&audsys CLK_AUDIO_I2SIN4>, + <&audsys CLK_AUDIO_ASRCO1>, + <&audsys CLK_AUDIO_ASRCO2>, + <&audsys CLK_AUDIO_ASRCO3>, + <&audsys CLK_AUDIO_ASRCO4>, + <&audsys CLK_AUDIO_AFE>, + <&audsys CLK_AUDIO_AFE_CONN>, + <&audsys CLK_AUDIO_A1SYS>, + <&audsys CLK_AUDIO_A2SYS>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd"; + + assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>, + <&topckgen CLK_TOP_A2SYS_HP_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_DIV>, + <&topckgen CLK_TOP_A2SYS_HP_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>, + <&topckgen CLK_TOP_AUD2PLL>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt7622-mmc"; reg = <0 0x11230000 0 0x1000>; -- 2.7.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] arm64: dts: mt7622: add audio related device nodes 2018-05-02 3:41 ` [PATCH 2/2] arm64: dts: mt7622: add audio related " sean.wang @ 2018-05-02 3:53 ` Sean Wang 2018-05-11 16:56 ` Matthias Brugger 0 siblings, 1 reply; 4+ messages in thread From: Sean Wang @ 2018-05-02 3:53 UTC (permalink / raw) To: matthias.bgg Cc: robh+dt, mark.rutland, devicetree, linux-mediatek, linux-arm-kernel, linux-kernel, Ryder Lee Hi, Matthias On Wed, 2018-05-02 at 11:41 +0800, sean.wang@mediatek.com wrote: > From: Ryder Lee <ryder.lee@mediatek.com> > > Add audio device nodes and its proper setup for all used pins > > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > --- > arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 11 +++- > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 89 ++++++++++++++++++++++++++++ > 2 files changed, 98 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts > index 45d8655..b783764 100644 > --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts > +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts > @@ -18,7 +18,7 @@ > compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; > > chosen { > - bootargs = "console=ttyS0,115200n1"; > + bootargs = "console=ttyS0,115200n1 swiotlb=512"; > }; > > cpus { > @@ -163,10 +163,17 @@ > i2s1_pins: i2s1-pins { > mux { > function = "i2s"; > - groups = "i2s_out_bclk_ws_mclk", > + groups = "i2s_out_mclk_bclk_ws", The old one ("i2s_out_bclk_ws_mclk") should be the indecisive value when I initially worked on the pinctrl device. It has to be corrected with "i2s_out_mclk_bclk_ws" to comply with the final dt-bindings. > "i2s1_in_data", > "i2s1_out_data"; > }; > + > + conf { > + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", > + "I2S_WS", "I2S_MCLK"; > + drive-strength = <12>; > + bias-pull-down; > + }; > }; > > irrx_pins: irrx-pins { > diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi > index 6bbabb6..9213c96 100644 > --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi > @@ -527,6 +527,95 @@ > status = "disabled"; > }; > > + audsys: clock-controller@11220000 { > + compatible = "mediatek,mt7622-audsys", "syscon"; > + reg = <0 0x11220000 0 0x2000>; > + #clock-cells = <1>; The binding have been through broonie/sound.git around a week ago > + > + afe: audio-controller { > + compatible = "mediatek,mt7622-audio"; > + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, > + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "afe", "asys"; > + > + clocks = <&infracfg CLK_INFRA_AUDIO_PD>, > + <&topckgen CLK_TOP_AUD1_SEL>, > + <&topckgen CLK_TOP_AUD2_SEL>, > + <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>, > + <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>, > + <&topckgen CLK_TOP_I2S0_MCK_SEL>, > + <&topckgen CLK_TOP_I2S1_MCK_SEL>, > + <&topckgen CLK_TOP_I2S2_MCK_SEL>, > + <&topckgen CLK_TOP_I2S3_MCK_SEL>, > + <&topckgen CLK_TOP_I2S0_MCK_DIV>, > + <&topckgen CLK_TOP_I2S1_MCK_DIV>, > + <&topckgen CLK_TOP_I2S2_MCK_DIV>, > + <&topckgen CLK_TOP_I2S3_MCK_DIV>, > + <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>, > + <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>, > + <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>, > + <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>, > + <&audsys CLK_AUDIO_I2SO1>, > + <&audsys CLK_AUDIO_I2SO2>, > + <&audsys CLK_AUDIO_I2SO3>, > + <&audsys CLK_AUDIO_I2SO4>, > + <&audsys CLK_AUDIO_I2SIN1>, > + <&audsys CLK_AUDIO_I2SIN2>, > + <&audsys CLK_AUDIO_I2SIN3>, > + <&audsys CLK_AUDIO_I2SIN4>, > + <&audsys CLK_AUDIO_ASRCO1>, > + <&audsys CLK_AUDIO_ASRCO2>, > + <&audsys CLK_AUDIO_ASRCO3>, > + <&audsys CLK_AUDIO_ASRCO4>, > + <&audsys CLK_AUDIO_AFE>, > + <&audsys CLK_AUDIO_AFE_CONN>, > + <&audsys CLK_AUDIO_A1SYS>, > + <&audsys CLK_AUDIO_A2SYS>; > + > + clock-names = "infra_sys_audio_clk", > + "top_audio_mux1_sel", > + "top_audio_mux2_sel", > + "top_audio_a1sys_hp", > + "top_audio_a2sys_hp", > + "i2s0_src_sel", > + "i2s1_src_sel", > + "i2s2_src_sel", > + "i2s3_src_sel", > + "i2s0_src_div", > + "i2s1_src_div", > + "i2s2_src_div", > + "i2s3_src_div", > + "i2s0_mclk_en", > + "i2s1_mclk_en", > + "i2s2_mclk_en", > + "i2s3_mclk_en", > + "i2so0_hop_ck", > + "i2so1_hop_ck", > + "i2so2_hop_ck", > + "i2so3_hop_ck", > + "i2si0_hop_ck", > + "i2si1_hop_ck", > + "i2si2_hop_ck", > + "i2si3_hop_ck", > + "asrc0_out_ck", > + "asrc1_out_ck", > + "asrc2_out_ck", > + "asrc3_out_ck", > + "audio_afe_pd", > + "audio_afe_conn_pd", > + "audio_a1sys_pd", > + "audio_a2sys_pd"; > + > + assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>, > + <&topckgen CLK_TOP_A2SYS_HP_SEL>, > + <&topckgen CLK_TOP_A1SYS_HP_DIV>, > + <&topckgen CLK_TOP_A2SYS_HP_DIV>; > + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>, > + <&topckgen CLK_TOP_AUD2PLL>; > + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; > + }; > + }; > + > mmc0: mmc@11230000 { > compatible = "mediatek,mt7622-mmc"; > reg = <0 0x11230000 0 0x1000>; ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] arm64: dts: mt7622: add audio related device nodes 2018-05-02 3:53 ` Sean Wang @ 2018-05-11 16:56 ` Matthias Brugger 0 siblings, 0 replies; 4+ messages in thread From: Matthias Brugger @ 2018-05-11 16:56 UTC (permalink / raw) To: Sean Wang Cc: robh+dt, mark.rutland, devicetree, linux-mediatek, linux-arm-kernel, linux-kernel, Ryder Lee On 05/02/2018 05:53 AM, Sean Wang wrote: > Hi, Matthias > > On Wed, 2018-05-02 at 11:41 +0800, sean.wang@mediatek.com wrote: >> From: Ryder Lee <ryder.lee@mediatek.com> >> >> Add audio device nodes and its proper setup for all used pins >> >> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> >> Signed-off-by: Sean Wang <sean.wang@mediatek.com> >> --- >> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 11 +++- >> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 89 ++++++++++++++++++++++++++++ >> 2 files changed, 98 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts >> index 45d8655..b783764 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts >> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts >> @@ -18,7 +18,7 @@ >> compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; >> >> chosen { >> - bootargs = "console=ttyS0,115200n1"; >> + bootargs = "console=ttyS0,115200n1 swiotlb=512"; >> }; >> >> cpus { >> @@ -163,10 +163,17 @@ >> i2s1_pins: i2s1-pins { >> mux { >> function = "i2s"; >> - groups = "i2s_out_bclk_ws_mclk", >> + groups = "i2s_out_mclk_bclk_ws", > > The old one ("i2s_out_bclk_ws_mclk") should be the indecisive value when > I initially worked on the pinctrl device. > > It has to be corrected with "i2s_out_mclk_bclk_ws" to comply with the > final dt-bindings. > >> "i2s1_in_data", >> "i2s1_out_data"; >> }; >> + >> + conf { >> + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", >> + "I2S_WS", "I2S_MCLK"; >> + drive-strength = <12>; >> + bias-pull-down; >> + }; >> }; >> >> irrx_pins: irrx-pins { >> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi >> index 6bbabb6..9213c96 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi >> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi >> @@ -527,6 +527,95 @@ >> status = "disabled"; >> }; >> >> + audsys: clock-controller@11220000 { >> + compatible = "mediatek,mt7622-audsys", "syscon"; >> + reg = <0 0x11220000 0 0x2000>; >> + #clock-cells = <1>; > > The binding have been through broonie/sound.git around a week ago > Thanks for the clarifications! Pushed to v4.17-next/dts64 Regards, Matthias >> + >> + afe: audio-controller { >> + compatible = "mediatek,mt7622-audio"; >> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, >> + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; >> + interrupt-names = "afe", "asys"; >> + >> + clocks = <&infracfg CLK_INFRA_AUDIO_PD>, >> + <&topckgen CLK_TOP_AUD1_SEL>, >> + <&topckgen CLK_TOP_AUD2_SEL>, >> + <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>, >> + <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>, >> + <&topckgen CLK_TOP_I2S0_MCK_SEL>, >> + <&topckgen CLK_TOP_I2S1_MCK_SEL>, >> + <&topckgen CLK_TOP_I2S2_MCK_SEL>, >> + <&topckgen CLK_TOP_I2S3_MCK_SEL>, >> + <&topckgen CLK_TOP_I2S0_MCK_DIV>, >> + <&topckgen CLK_TOP_I2S1_MCK_DIV>, >> + <&topckgen CLK_TOP_I2S2_MCK_DIV>, >> + <&topckgen CLK_TOP_I2S3_MCK_DIV>, >> + <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>, >> + <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>, >> + <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>, >> + <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>, >> + <&audsys CLK_AUDIO_I2SO1>, >> + <&audsys CLK_AUDIO_I2SO2>, >> + <&audsys CLK_AUDIO_I2SO3>, >> + <&audsys CLK_AUDIO_I2SO4>, >> + <&audsys CLK_AUDIO_I2SIN1>, >> + <&audsys CLK_AUDIO_I2SIN2>, >> + <&audsys CLK_AUDIO_I2SIN3>, >> + <&audsys CLK_AUDIO_I2SIN4>, >> + <&audsys CLK_AUDIO_ASRCO1>, >> + <&audsys CLK_AUDIO_ASRCO2>, >> + <&audsys CLK_AUDIO_ASRCO3>, >> + <&audsys CLK_AUDIO_ASRCO4>, >> + <&audsys CLK_AUDIO_AFE>, >> + <&audsys CLK_AUDIO_AFE_CONN>, >> + <&audsys CLK_AUDIO_A1SYS>, >> + <&audsys CLK_AUDIO_A2SYS>; >> + >> + clock-names = "infra_sys_audio_clk", >> + "top_audio_mux1_sel", >> + "top_audio_mux2_sel", >> + "top_audio_a1sys_hp", >> + "top_audio_a2sys_hp", >> + "i2s0_src_sel", >> + "i2s1_src_sel", >> + "i2s2_src_sel", >> + "i2s3_src_sel", >> + "i2s0_src_div", >> + "i2s1_src_div", >> + "i2s2_src_div", >> + "i2s3_src_div", >> + "i2s0_mclk_en", >> + "i2s1_mclk_en", >> + "i2s2_mclk_en", >> + "i2s3_mclk_en", >> + "i2so0_hop_ck", >> + "i2so1_hop_ck", >> + "i2so2_hop_ck", >> + "i2so3_hop_ck", >> + "i2si0_hop_ck", >> + "i2si1_hop_ck", >> + "i2si2_hop_ck", >> + "i2si3_hop_ck", >> + "asrc0_out_ck", >> + "asrc1_out_ck", >> + "asrc2_out_ck", >> + "asrc3_out_ck", >> + "audio_afe_pd", >> + "audio_afe_conn_pd", >> + "audio_a1sys_pd", >> + "audio_a2sys_pd"; >> + >> + assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>, >> + <&topckgen CLK_TOP_A2SYS_HP_SEL>, >> + <&topckgen CLK_TOP_A1SYS_HP_DIV>, >> + <&topckgen CLK_TOP_A2SYS_HP_DIV>; >> + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>, >> + <&topckgen CLK_TOP_AUD2PLL>; >> + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; >> + }; >> + }; >> + >> mmc0: mmc@11230000 { >> compatible = "mediatek,mt7622-mmc"; >> reg = <0 0x11230000 0 0x1000>; > > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-05-11 16:56 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-05-02 3:41 [PATCH 1/2] arm64: dts: mt7622: add High-Speed DMA device nodes sean.wang 2018-05-02 3:41 ` [PATCH 2/2] arm64: dts: mt7622: add audio related " sean.wang 2018-05-02 3:53 ` Sean Wang 2018-05-11 16:56 ` Matthias Brugger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).