Re: [PATCH v2 0/8] Add ipq806x missing bindings

[Christian Marangi <ansuelsmth@gmail.com>]

On Sat, Jul 16, 2022 at 09:46:23PM -0500, Bjorn Andersson wrote:
> On Wed 06 Jul 20:09 CDT 2022, Christian Marangi wrote:
> 
> > This is a respin of "Multiple addition to ipq8064 dtsi" series
> > with major changes and some commit removed.
> > 
> > This series try to add some of the missing bindings for ipq806x.
> > 
> > This still lacks of the cpu bindings and all the bindings required
> > to scale cpu clk or L2. These will come later as the driver and
> > documentation require some changes.
> > 
> > So for now we try to add bindings that can directly applied without
> > making changes to any drivers.
> > 
> > Changes:
> > v2:
> > - Dropped "add sic non secure node for ipq8064" (no user found)
> > - Dropped "add smem node for ipq8064" (require changes to the driver
> >   to remove syscon node and use regs directly, will be added in a
> >   different series)
> > - Dropped "fix dtc warning for missing #address-cells for ipq8064" (
> >   doesn't actually fix any warning)
> > - Changed "enable usb phy by default for ipq8064" to disable usb phy
> >   by default
> > - Reworked rpm smb208 declaration to a saparate dtsi
> > - Fixed order with compatible-reg-status
> > - Squashed "remove redundant binding from ipq8064 rb3011 dts" with
> >   "add multiple missing pin definition for ipq8064" to prevent dtc
> >   error.
> > - Add review tag for snps patch
> > 
> > Changes from "Multiple addition to ipq8064 dtsi":
> > v3:
> > - Fix error in rb3011 dts
> > - Add tested-by tag on the entire series
> > v2:
> > - Added missing patch
> > - Added additional gsbi6 spi
> > - Added extra description for L2 cache opp
> > - Fxied smb208 enabled by default that is problematic for rb3011 devices
> > 
> > Christian Marangi (8):
> >   ARM: dts: qcom: add multiple missing pin definition for ipq8064
> >   ARM: dts: qcom: add gsbi6 missing definition for ipq8064
> >   ARM: dts: qcom: add specific ipq8064 dtsi with smb208 rpm regulators
> >   ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064
> >   ARM: dts: qcom: disable usb phy by default for ipq8064
> >   ARM: dts: qcom: reduce pci IO size to 64K for ipq8064
> >   ARM: dts: qcom: fix and add some missing gsbi node for ipq8064
> >   ARM: dts: qcom: add speedbin efuse nvmem node
> 
> Please prefix your ipa8064-specific patches with
>   "ARM: dts: qcom: ipq8064: ..."
> 
> It makes the git history easier to read, so I fixed it up while applying
> these.
>

Oh ok! I wasn't aware of this tag looking at the old commits. Will do
that in the next commits.

> > 
> >  arch/arm/boot/dts/qcom-ipq8064-ap148.dts   |   6 -
> >  arch/arm/boot/dts/qcom-ipq8064-rb3011.dts  |   9 --
> >  arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi |  37 +++++
> >  arch/arm/boot/dts/qcom-ipq8064.dtsi        | 150 +++++++++++++++++++--
> >  4 files changed, 179 insertions(+), 23 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
> > 
> > -- 
> > 2.36.1
> > 

-- 
	Ansuel