Re: [PATCH] media: qcom: camss: Use a macro to specify the initial buffer count

[Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>]

On 10/15/25 05:42, Hangxiang Ma wrote:
> Replace the hardcoded buffer count value with a macro to enable
> operating on these buffers elsewhere in the CAMSS driver based on this
> count. Some of the hardware architectures require deferring the AUP and
> REG update until after the CSID configuration and this macro is expected
> to be useful in such scenarios.
> 
> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
> ---
> This change use a global macro to specify the initial buffer count. It
> meets the requirement that some hardware architectures need to defer the
> AUP and REG update to CSID configuration stage.

Both the commit message and the explanation above brings no clarity on
the necessity of this change at all.

This is a dangling useless commit, if you'd like to connect it to
something meaningful, please include it into a series.

> ---
>   drivers/media/platform/qcom/camss/camss-vfe.c | 2 +-
>   drivers/media/platform/qcom/camss/camss.h     | 1 +
>   2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 09b29ba383f1..2753c2bb6c04 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -541,7 +541,7 @@ int vfe_enable_output_v2(struct vfe_line *line)
>   
>   	ops->vfe_wm_start(vfe, output->wm_idx[0], line);
>   
> -	for (i = 0; i < 2; i++) {
> +	for (i = 0; i < CAMSS_INIT_BUF_COUNT; i++) {
>   		output->buf[i] = vfe_buf_get_pending(output);
>   		if (!output->buf[i])
>   			break;
> diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
> index a70fbc78ccc3..901f84efaf7d 100644
> --- a/drivers/media/platform/qcom/camss/camss.h
> +++ b/drivers/media/platform/qcom/camss/camss.h
> @@ -41,6 +41,7 @@
>   	(to_camss_index(ptr_module, index)->dev)
>   
>   #define CAMSS_RES_MAX 17
> +#define CAMSS_INIT_BUF_COUNT 2
>   
>   struct camss_subdev_resources {
>   	char *regulators[CAMSS_RES_MAX];
> 

-- 
Best wishes,
Vladimir