Re: [PATCH v3 3/3] arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 04/07/2022 19:11, Dmitry Baryshkov wrote:
> Add #clock-cells property to the HDMI PHY device node to let other nodes
> resolve the hdmipll clock. While we are at it, also add the XO clock to
> the device node.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Bjorn, I'm picking the patches 1,2 into msm-next. Could you please pick 
this patch into your dts-for-6.1?

> ---
>   arch/arm64/boot/dts/qcom/msm8996.dtsi | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 25d6b26fab60..b72385ffecc6 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -1049,9 +1049,13 @@ hdmi_phy: hdmi-phy@9a0600 {
>   					    "hdmi_phy";
>   
>   				clocks = <&mmcc MDSS_AHB_CLK>,
> -					 <&gcc GCC_HDMI_CLKREF_CLK>;
> +					 <&gcc GCC_HDMI_CLKREF_CLK>,
> +					 <&xo_board>;
>   				clock-names = "iface",
> -					      "ref";
> +					      "ref",
> +					      "xo";
> +
> +				#clock-cells = <0>;
>   
>   				status = "disabled";
>   			};

-- 
With best wishes
Dmitry