[PATCH v4 0/4] arm64: dts: renesas: Add R-Car S4 Starter Kit support

[PATCH v4 0/4] arm64: dts: renesas: Add R-Car S4 Starter Kit support

[Kuninori Morimoto]

Hi Geert

This patch-set is v4 of R-Car S4 Starter Kit support.
It needs Rswitch bug fix patch [1] which was posted to Ether ML.
I hope it will be accepted for v6.6 Kernel.

[1] Link: https://lore.kernel.org/r/20230925003416.3863560-1-yoshihiro.shimoda.uh@renesas.com

S4 Starter Kit is possible to setup details via config exe,
but the DT will be more complex. This DT is assuming "default" settings
to avoid confusion, and also assuming it is used under NFS system.

R-Car S4 Starter Kit is using new R8A779F4 SoC which is updated version
of R8A779F0. This patch adds new r8a779f4.dtsi file but is using existing
r8a779f0.dtsi internally.

v3 -> v4
	- tidyup typo "r8a7799f0" -> "r8a779f0" on log
	- tidyup typo "INT-EX"    -> "INTC-EX"  on log
	- use script for To/Cc

v2 -> v3
	- alphabetical order on pfc
	- use "OR" on dts SPDX
	- remove UHS from mmc
	- remove unused "sd_pins" from pfc
	- add Co-developed-by:
	- add interrupt on rswitch
	- fixup node name on rswitch
	- re-add "st,24c16" on eeprom
	- add "renesas,r8a779f0" on compatible
	- fix typo "s/r8a77f4/r8a779f4/ on dtsi

v1 -> v2
	- correct board name
	- removed BSP specific device
	- alphabetical order
	- add missing compatibles
	- add new r8a779f4.dtsi


Kuninori Morimoto (4):
  dt-bindings: irqchip: renesas,irqc: Add r8a779f0 support
  dt-bindings: soc: renesas: renesas.yaml: Add renesas,s4sk compatible
  arm64: dts: renesas: Add Renesas R8A779F4 SoC support
  arm64: dts: renesas: Add R-Car S4 Starter Kit support

 .../interrupt-controller/renesas,irqc.yaml    |   1 +
 .../bindings/soc/renesas/renesas.yaml         |   7 +
 arch/arm64/boot/dts/renesas/Makefile          |   1 +
 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts | 240 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779f4.dtsi     |  12 +
 5 files changed, 261 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4.dtsi

-- 
2.25.1

[PATCH v4 1/4] dt-bindings: irqchip: renesas,irqc: Add r8a779f0 support

[Kuninori Morimoto]

Document support for the Interrupt Controller for External Devices
(INTC-EX) in the Renesas R-Car S4 (R8A779F0) SoC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 .../devicetree/bindings/interrupt-controller/renesas,irqc.yaml   | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
index 95033cb514fb..b1f3e7d7b88c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -37,6 +37,7 @@ properties:
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
           - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779f0    # R-Car S4
           - renesas,intc-ex-r8a779g0    # R-Car V4H
       - const: renesas,irqc
 
-- 
2.25.1

Re: [PATCH v4 1/4] dt-bindings: irqchip: renesas,irqc: Add r8a779f0 support

[Geert Uytterhoeven]

On Tue, Oct 3, 2023 at 4:33 AM Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
> Document support for the Interrupt Controller for External Devices
> (INTC-EX) in the Renesas R-Car S4 (R8A779F0) SoC.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

I posted a similar patch before: "[PATCH v2] dt-bindings: irqchip:
renesas,irqc: Add r8a779f0 support"
https://lore.kernel.org/r/9467a1c67d5d240211f88336973fa968d39cc860.1690446928.git.geert+renesas@glider.be

Marc: please take one or the other ;-)
Thanks!

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v4 1/4] dt-bindings: irqchip: renesas,irqc: Add r8a779f0 support

[Krzysztof Kozlowski]

On 03/10/2023 04:33, Kuninori Morimoto wrote:
> Document support for the Interrupt Controller for External Devices
> (INTC-EX) in the Renesas R-Car S4 (R8A779F0) SoC.
> 
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v4 2/4] dt-bindings: soc: renesas: renesas.yaml: Add renesas,s4sk compatible

[Kuninori Morimoto]

This patch adds "renesas,s4sk" which target the R-Car S4 Starter Kit
board.

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 Documentation/devicetree/bindings/soc/renesas/renesas.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
index 53b95f348f8e..b2bdc26e8329 100644
--- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -335,6 +335,13 @@ properties:
           - const: renesas,spider-cpu
           - const: renesas,r8a779f0
 
+      - description: R-Car S4-8 (R8A779F4)
+        items:
+          - enum:
+              - renesas,s4sk       # R-Car S4 Starter Kit board (Y-ASK-RCAR-S4-1000BASE-T#WS12)
+          - const: renesas,r8a779f4
+          - const: renesas,r8a779f0
+
       - description: R-Car V4H (R8A779G0)
         items:
           - enum:
-- 
2.25.1

Re: [PATCH v4 2/4] dt-bindings: soc: renesas: renesas.yaml: Add renesas,s4sk compatible

[Krzysztof Kozlowski]

On 03/10/2023 04:33, Kuninori Morimoto wrote:
> This patch adds "renesas,s4sk" which target the R-Car S4 Starter Kit
> board.
> 
> Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v4 2/4] dt-bindings: soc: renesas: renesas.yaml: Add renesas,s4sk compatible

[Geert Uytterhoeven]

On Tue, Oct 3, 2023 at 4:33 AM Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
> This patch adds "renesas,s4sk" which target the R-Car S4 Starter Kit
> board.
>
> Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.7.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v4 3/4] arm64: dts: renesas: Add Renesas R8A779F4 SoC support

[Kuninori Morimoto]

R8A779F4 is update version of R8A779F0.
This patch adds its support, but is using r8a779f0 dtsi internally.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a779f4.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779f4.dtsi b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
new file mode 100644
index 000000000000..ebed41892df3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car S4-8 (R8A779F4) SoC
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include "r8a779f0.dtsi"
+
+/ {
+	compatible = "renesas,r8a779f4", "renesas,r8a779f0";
+};
-- 
2.25.1

Re: [PATCH v4 3/4] arm64: dts: renesas: Add Renesas R8A779F4 SoC support

[Geert Uytterhoeven]

On Tue, Oct 3, 2023 at 4:33 AM Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
> R8A779F4 is update version of R8A779F0.
> This patch adds its support, but is using r8a779f0 dtsi internally.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.7.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v4 4/4] arm64: dts: renesas: Add R-Car S4 Starter Kit support

[Kuninori Morimoto]

Add initial support for the R-Car S4 Starter Kit with R8A779F4
SoC support. Based on a patch in the BSP.

Signed-off-by: Michael Dege <michael.dege@renesas.com>
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 arch/arm64/boot/dts/renesas/Makefile          |   1 +
 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts | 240 ++++++++++++++++++
 2 files changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 7114cbbd8713..751cb0c65dcd 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb
+dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f4-s4sk.dtb
 
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
new file mode 100644
index 000000000000..abfda5c6ca16
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car S4 Starter Kit board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "r8a779f4.dtsi"
+
+/ {
+	model = "R-Car S4 Starter Kit board";
+	compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0";
+
+	aliases {
+		serial0	= &hscif0;
+		serial1	= &hscif1;
+		eth0	= &rswitch;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		/* The last 512MB is reserved for CR. */
+		reg = <0x0 0x48000000 0x0 0x58000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	vcc_sdhi: regulator-vcc-sdhi {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&eth_serdes {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "st,24c16", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi>;
+	cd-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data", "hscif1_ctrl";
+		function = "hscif1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	sd_pins: sd {
+		groups = "mmc_data4", "mmc_ctrl";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	tsn0_pins: tsn0 {
+		groups = "tsn0_mdio_b", "tsn0_link_b";
+		function = "tsn0";
+		drive-strength = <18>;
+		power-source = <3300>;
+	};
+
+	tsn1_pins: tsn1 {
+		groups = "tsn1_mdio_b", "tsn1_link_b";
+		function = "tsn1";
+		drive-strength = <18>;
+		power-source = <3300>;
+	};
+};
+
+&rswitch {
+	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&ic99>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ic99: ethernet-phy@1 {
+					reg = <1>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			phy-handle = <&ic102>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ic102: ethernet-phy@2 {
+					reg = <2>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
+		port@2 {
+			status = "disabled";
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
+
+&ufs {
+	status = "okay";
+};
+
+&ufs30_clk {
+	clock-frequency = <38400000>;
+};
-- 
2.25.1

Re: [PATCH v4 4/4] arm64: dts: renesas: Add R-Car S4 Starter Kit support

[Geert Uytterhoeven]

On Tue, Oct 3, 2023 at 4:33 AM Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
> Add initial support for the R-Car S4 Starter Kit with R8A779F4
> SoC support. Based on a patch in the BSP.
>
> Signed-off-by: Michael Dege <michael.dege@renesas.com>
> Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
> Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.7.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds