Re: [PATCH] ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1

[Alexandre TORGUE <alexandre.torgue@foss.st.com>]

Hi Fabrice

On 9/30/22 17:02, Fabrice Gasnier wrote:
> From: Amelie Delaunay <amelie.delaunay@foss.st.com>
> 
> phy-stm32-usbphyc bindings uses a connector node with vbus-supply
> property.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
>   arch/arm/boot/dts/stm32mp157c-ev1.dts | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index d142dd30e16b..e22e394832a8 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -385,6 +385,11 @@ &usbphyc_port0 {
>   	st,tune-squelch-level = <3>;
>   	st,tune-hs-rx-offset = <2>;
>   	st,no-lsfs-sc;
> +
> +	connector {
> +		compatible = "usb-a-connector";
> +		vbus-supply = <&vbus_sw>;
> +	};
>   };
>   
>   &usbphyc_port1 {

Applied on stm32-next.

Thanks
Alex