Re: [PATCH v7 2/4] pwm: opencores: Add PWM driver support

[William Qiu <william.qiu@starfivetech.com>]

On 2023/11/10 20:27, Krzysztof Kozlowski wrote:
> On 10/11/2023 07:20, William Qiu wrote:
>> Add Pulse Width Modulation driver support for OpenCores.
> 
> What is OpenCores? Why all your commit messages lack basic explanation
> of the hardware you are working on?
> 
Will modify.
>> 
> 
> 
>> +static const struct ocores_pwm_data jh7100_pwm_data = {
>> +	.get_ch_base = starfive_jh71x0_get_ch_base,
>> +};
>> +
>> +static const struct ocores_pwm_data jh7110_pwm_data = {
>> +	.get_ch_base = starfive_jh71x0_get_ch_base,
>> +};
>> +
>> +static const struct of_device_id ocores_pwm_of_match[] = {
>> +	{ .compatible = "opencores,pwm" },
>> +	{ .compatible = "starfive,jh7100-pwm", .data = &jh7100_pwm_data},
>> +	{ .compatible = "starfive,jh7110-pwm", .data = &jh7110_pwm_data},
> 
> Your bindings say something entirely else.
> 
> I don't understand what is happening with this patchset.
> 
Will update.
> 
>> +	{ /* sentinel */ }
>> +};
> 
> ...
> 
>> +	ddata->regs = devm_platform_ioremap_resource(pdev, 0);
>> +	if (IS_ERR(ddata->regs))
>> +		return dev_err_probe(dev, PTR_ERR(ddata->regs),
>> +				     "Unable to map IO resources\n");
>> +
>> +	ddata->clk = devm_clk_get(dev, NULL);
>> +	if (IS_ERR(ddata->clk))
>> +		return dev_err_probe(dev, PTR_ERR(ddata->clk),
>> +				     "Unable to get pwm's clock\n");
>> +
>> +	ret = clk_prepare_enable(ddata->clk);
>> +	if (ret)
>> +		return dev_err_probe(dev, ret, "Clock enable failed\n");
> 
> dev_clk_get_enabled() or whatever the API is called
>
You mean change devm_clk_get_enabled() instead of devm_clk_get()?
>> +
>> +	ddata->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
>> +	reset_control_deassert(ddata->rst);
>> +
>> +	ddata->clk_rate = clk_get_rate(ddata->clk);
>> +	if (ddata->clk_rate <= 0)
>> +		return dev_err_probe(dev, ddata->clk_rate,
>> +				     "Unable to get clock's rate\n");
>> +
>> +	ret = devm_pwmchip_add(dev, chip);
>> +	if (ret < 0) {
>> +		dev_err_probe(dev, ret, "Could not register PWM chip\n");
>> +		clk_disable_unprepare(ddata->clk);
>> +		reset_control_assert(ddata->rst);
> 
> return dev_err_probe
> 
Will update.
>> +	}
>> +
>> +	platform_set_drvdata(pdev, ddata);
>> +
>> +	return ret;
>> +}
>> +
>> +static void ocores_pwm_remove(struct platform_device *dev)
>> +{
>> +	struct ocores_pwm_device *ddata = platform_get_drvdata(dev);
>> +
>> +	reset_control_assert(ddata->rst);
>> +	clk_disable_unprepare(ddata->clk);
> 
> You have confusing order of cleanups. It's like random, once clock then
> reset, in other place reset then clock.
> 
Will change it into a reasonable order.

Thank you for spending time on this patchset.

Best Regards,
William
> Best regards,
> Krzysztof
>