From mboxrd@z Thu Jan 1 00:00:00 1970 From: paulo@inutilfutil.com Subject: Re: [PATCH v2 0/5] net-next: ethernet: add sun8i-emac driver Date: Mon, 25 Jul 2016 06:16:45 -0700 (PDT) Message-ID: <668e8915-109e-431e-96d0-908b1c6553ad@googlegroups.com> References: <1469001800-11615-1-git-send-email-clabbe.montjoie@gmail.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_257_1661378373.1469452605356" Return-path: In-Reply-To: <1469001800-11615-1-git-send-email-clabbe.montjoie@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-sunxi Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, netdev@vger.kernel.org, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, wens@csie.org, robh+dt@kernel.org, clabbe.montjoie@gmail.com, maxime.ripard@free-electrons.com, davem@davemloft.net, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org ------=_Part_257_1661378373.1469452605356 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit On Wednesday, July 20, 2016 at 5:03:41 AM UTC-3, clabbe.montjoie wrote: > Hello > > This patch series add the driver for sun8i-emac which handle the Ethernet MAC > present on Allwinner H3/A83T/A64 SoCs. > > It supports 10/100/1000 Mbit/s speed with half/full duplex. > It can use an internal PHY (MII 10/100) or an external PHY > via RGMII/RMII. > > This patch series enable the driver only for the H3 SoC since A83T and A64 > doesn't have the necessary clocks present in mainline. > > This patch series enable the driver only for the OrangePiPC board since other > board with H3 use external PHY which need optional regulators that will be > supported later. > > The driver have been tested on the following boards: > - H3 Orange PI PC, Orange PI Plus, BananaPI-M2+ > - A64 Pine64 > - A83T BananaPI-M3 > > I would like to thanks Chen-Yu Tsai for his help on developing this driver. > > Regards > > Changes since v1 > - Implement NAPI > - Sorted and reworded all define > - Reworked ethtools stats strings > - Removed all unneeded __packked and __aligned > - Added tuning of RX/TX ring size via ethtool > - Corrected use of sk/skb naming > - Added some wmb when needed > - Moved irq claim/free to emac_open/close > - Lots of code refactoring > > LABBE Corentin (5): > ethernet: add sun8i-emac driver > MAINTAINERS: Add myself as maintainers of sun8i-emac > ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac > ARM: dts: sun8i-h3: add sun8i-emac ethernet driver > ARM: dts: sun8i: Enable sun8i-emac on the Orange PI PC > > .../bindings/net/allwinner,sun8i-emac.txt | 65 + > MAINTAINERS | 6 + > arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 11 + > arch/arm/boot/dts/sun8i-h3.dtsi | 14 + > drivers/net/ethernet/allwinner/Kconfig | 13 + > drivers/net/ethernet/allwinner/Makefile | 1 + > drivers/net/ethernet/allwinner/sun8i-emac.c | 2127 ++++++++++++++++++++ > 7 files changed, 2237 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt > create mode 100644 drivers/net/ethernet/allwinner/sun8i-emac.c > > -- > 2.7.3 Works on my Orange Pi PC. Thank you! IMHO, we should enable this module on sunxi_defconfig. Paulo ------=_Part_257_1661378373.1469452605356 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ------=_Part_257_1661378373.1469452605356--