* [PATCH v4 0/5] Add i.MX91 platform support
@ 2025-01-21 7:40 Joy Zou
2025-01-21 7:40 ` [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board Joy Zou
` (5 more replies)
0 siblings, 6 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 7:40 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
The design of the i.MX91 platform is very similar to i.MX93.
The mainly difference between i.MX91 and i.MX93 is as follows:
- i.MX91 removed some clocks and modified the names of some clocks.
- i.MX91 only has one A core
- i.MX91 has different pinmux
Therefore, i.MX91 can reuse i.MX93 dtsi.
---
Change for v4:
- Add one imx93 patch that add labels in imx93.dtsi
- modify the references in imx91.dtsi
- modify the code alignment
- remove unused newline
- delete the status property
- align pad hex values
Change for v3:
- Add Conor's ack on patch #1
- format imx91-11x11-evk.dts with the dt-format tool
- add lpi2c1 node
Change for v2:
- change ddr node pmu comaptible
- remove mu1 and mu2
- change iomux node compatible and enable 91 pinctrl
- refine commit message for patch #2
- change hex to lowercase in pinfunc.h
- ordering nodes with the dt-format tool
Joy Zou (1):
arm64: dts: imx93: Add labels for the references easier
Pengfei Li (4):
dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
arm64: dts: freescale: Add i.MX91 dtsi support
arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
arm64: defconfig: enable i.MX91 pinctrl
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx91-11x11-evk.dts | 873 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 +++++++++++++++
arch/arm64/boot/dts/freescale/imx91.dtsi | 70 ++
arch/arm64/boot/dts/freescale/imx93.dtsi | 4 +-
arch/arm64/configs/defconfig | 1 +
7 files changed, 1723 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
--
2.37.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
@ 2025-01-21 7:40 ` Joy Zou
2025-01-21 7:52 ` Krzysztof Kozlowski
2025-01-21 7:40 ` [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support Joy Zou
` (4 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Joy Zou @ 2025-01-21 7:40 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
From: Pengfei Li <pengfei.li_1@nxp.com>
Add the board imx91-11x11-evk in the binding docuemnt.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 371317554863..f0592e552ca7 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1341,6 +1341,12 @@ properties:
- fsl,imx8ulp-evk # i.MX8ULP EVK Board
- const: fsl,imx8ulp
+ - description: i.MX91 based Boards
+ items:
+ - enum:
+ - fsl,imx91-11x11-evk # i.MX91 11x11 EVK Board
+ - const: fsl,imx91
+
- description: i.MX93 based Boards
items:
- enum:
--
2.37.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
2025-01-21 7:40 ` [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board Joy Zou
@ 2025-01-21 7:40 ` Joy Zou
2025-01-21 8:33 ` Alexander Stein
2025-01-21 7:40 ` [PATCH v4 3/5] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support Joy Zou
` (3 subsequent siblings)
5 siblings, 1 reply; 20+ messages in thread
From: Joy Zou @ 2025-01-21 7:40 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
From: Pengfei Li <pengfei.li_1@nxp.com>
The i.MX 91 family features an Arm Cortex-A55 running at up to
1.4GHz, support for modern LPDDR4 memory to enable platform longevity,
along with a rich set of peripherals targeting medical, industrial
and consumer IoT market segments.
The design of the i.MX91 platform is very similar to i.MX93.
The mainly difference between i.MX91 and i.MX93 is as follows:
- i.MX91 removed some clocks and modified the names of some clocks.
- i.MX91 only has one A core
- i.MX91 has different pinmux
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx91.dtsi | 70 ++
2 files changed, 840 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx91-pinfunc.h b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
new file mode 100644
index 000000000000..b0066df173b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX 0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0 0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0 0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1 0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0 0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1 0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2 0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2 0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3 0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL 0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK 0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B 0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL 0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3 0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4 0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4 0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5 0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0 0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5 0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6 0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1 0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6 0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7 0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1 0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1 0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK 0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B 0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL 0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7 0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8 0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2 0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8 0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9 0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3 0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9 0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4 0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11 0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK 0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5 0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK 0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B 0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL 0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2 0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3 0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6 0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15 0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX 0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7 0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK 0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B 0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX 0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2 0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8 0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9 0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19 0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3 0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN 0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN 0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2 0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0 0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0 0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23 0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD 0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT 0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1 0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL 0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1 0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27 0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3 0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX 0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3 0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1 0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX 0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX 0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC 0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0 0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0 0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL 0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA 0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1 0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA 0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX 0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2 0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO3 0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL 0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK 0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX 0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3 0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3 0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA 0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B 0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR 0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4 0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4 0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B 0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX 0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5 0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5 0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6 0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK 0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7 0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7 0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN 0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8 0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0 0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9 0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9 0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT 0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX 0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10 0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B 0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1 0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11 0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2 0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12 0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3 0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13 0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC 0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B 0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14 0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK 0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0 0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0 0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16 0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC 0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17 0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC 0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B 0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18 0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1 0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX 0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19 0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2 0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3 0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER 0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21 0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4 0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0 0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5 0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER 0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23 0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6 0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX 0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24 0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7 0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN 0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25 0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8 0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9 0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8 0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8 0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK 0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD 0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9 0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9 0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN 0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0 0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT 0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1 0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13 0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1 0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4 0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0 0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5 0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN 0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6 0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK 0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7 0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP 0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17 0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT 0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B 0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD 0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B 0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21 0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0 0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B 0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1 0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B 0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA 0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2 0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3 0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL 0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25 0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0 0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0 0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL 0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA 0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1 0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1 0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA 0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2 0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2 0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT 0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX 0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3 0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3 0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX 0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4 0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4 0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX 0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5 0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5 0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX 0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6 0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6 0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX 0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7 0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0 0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1 0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO3 0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B 0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3 0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3 0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX 0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4 0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX 0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5 0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6 0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX 0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B 0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK 0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3 0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7 0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC 0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8 0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1 0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT 0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B 0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN 0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B 0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX 0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12 0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK 0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX 0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13 0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK 0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK 0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT 0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15 0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
new file mode 100644
index 000000000000..67a5a487ab57
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx93.dtsi"
+
+/delete-node/ &A55_1;
+/delete-node/ &cm33;
+/delete-node/ &mlmix;
+/delete-node/ &mu1;
+/delete-node/ &mu2;
+
+&clk {
+ compatible = "fsl,imx91-ccm";
+};
+
+&eqos {
+ clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+ <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+ assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET1_QOS_TSN>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+};
+
+&fec {
+ clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+ <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+ <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET2_REGULAR>,
+ <&clk IMX93_CLK_DUMMY>;
+ assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+ <&clk IMX91_CLK_ENET2_REGULAR>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+ clocks = <&clk IMX93_CLK_BUS_AON>,
+ <&clk IMX93_CLK_I3C1_GATE>,
+ <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+ clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+ <&clk IMX93_CLK_I3C2_GATE>,
+ <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+ compatible = "fsl,imx91-iomuxc";
+};
+
+&tmu {
+ status = "disabled";
+};
+
+&ddr_pmu {
+ compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&map0 {
+ cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+};
--
2.37.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 3/5] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
2025-01-21 7:40 ` [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board Joy Zou
2025-01-21 7:40 ` [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support Joy Zou
@ 2025-01-21 7:40 ` Joy Zou
2025-01-21 7:40 ` [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl Joy Zou
` (2 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 7:40 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
From: Pengfei Li <pengfei.li_1@nxp.com>
Add i.MX91 11x11 EVK board support.
- Enable ADC1.
- Enable lpuart1 and lpuart5.
- Enable network eqos and fec.
- Enable I2C bus and children nodes under I2C bus.
- Enable USB and related nodes.
- Enable uSDHC1 and uSDHC2.
- Enable Watchdog3.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx91-11x11-evk.dts | 873 ++++++++++++++++++
2 files changed, 874 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 839432153cc7..53496afe9888 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -269,6 +269,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
new file mode 100644
index 000000000000..ae6e365a9754
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,873 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+ compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+ model = "NXP i.MX91 11X11 EVK board";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ rtc0 = &bbnsm_rtc;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vref_1v8";
+ };
+
+ reg_audio_pwr: regulator-audio-pwr {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "audio-pwr";
+ gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <12000>;
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc3_vmmc: regulator-usdhc3 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "WLAN_EN";
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /*
+ * IW612 wifi chip needs more delay than other wifi chips to complete
+ * the host interface initialization after power up, otherwise the
+ * internal state of IW612 may be unstable, resulting in the failure of
+ * the SDIO3.0 switch voltage.
+ */
+ startup-delay-us = <20000>;
+ };
+
+ reg_vdd_12v: regulator-vdd-12v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <12000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-name = "reg_vdd_12v";
+ gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vrpi_3v3: regulator-vrpi-3v3 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VRPI_3V3";
+ vin-supply = <&buck4>;
+ gpio = <&pcal6524 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vrpi_5v: regulator-vrpi-5v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "VRPI_5V";
+ gpio = <&pcal6524 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x40000000>;
+ reusable;
+ size = <0 0x10000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&eqos {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ eee-broken-1000t;
+ };
+ };
+};
+
+&fec {
+ phy-handle = <ðphy2>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+ pinctrl-names = "default", "sleep";
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <5000000>;
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ eee-broken-1000t;
+ };
+ };
+};
+
+/*
+ * When add, delete or change any target device setting in &lpi2c1,
+ * please synchronize the changes to the &i3c1 bus in imx91-11x11-evk-i3c.dts.
+ */
+&lpi2c1 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clk IMX93_CLK_SAI3_GATE>;
+ AVDD-supply = <®_audio_pwr>;
+ CPVDD-supply = <®_audio_pwr>;
+ DBVDD-supply = <®_audio_pwr>;
+ DCVDD-supply = <®_audio_pwr>;
+ MICVDD-supply = <®_audio_pwr>;
+ PLLVDD-supply = <®_audio_pwr>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ SPKVDD2-supply = <®_audio_pwr>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+
+ lsm6dsm@6a {
+ compatible = "st,lsm6dso";
+ reg = <0x6a>;
+ };
+};
+
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio3>;
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ pinctrl-names = "default";
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&pcal6524>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2237500>;
+ regulator-min-microvolt = <650000>;
+ regulator-name = "BUCK1";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <2187500>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK2";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK4";
+ };
+
+ buck5: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK5";
+ };
+
+ buck6: BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3400000>;
+ regulator-min-microvolt = <600000>;
+ regulator-name = "BUCK6";
+ };
+
+ ldo1: LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1600000>;
+ regulator-name = "LDO1";
+ };
+
+ ldo4: LDO4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <800000>;
+ regulator-name = "LDO4";
+ };
+
+ ldo5: LDO5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "LDO5";
+ };
+ };
+ };
+
+ adp5585: io-expander@34 {
+ compatible = "adi,adp5585-00", "adi,adp5585";
+ reg = <0x34>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #pwm-cells = <3>;
+ gpio-reserved-ranges = <5 1>;
+
+ exp-sel-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+};
+
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio3>;
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <15000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ ptn5110_2: tcpc@51 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x51>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio3>;
+ status = "okay";
+
+ typec2_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <15000000>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec2_dr_sw: endpoint {
+ remote-endpoint = <&usb2_drd_sw>;
+ };
+ };
+ };
+ };
+ };
+
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&pcal6524>;
+ status = "okay";
+ };
+};
+
+&lpuart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lpuart5 {
+ pinctrl-0 = <&pinctrl_uart5>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbotg1 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usbotg2 {
+ adp-disable;
+ disable-over-current;
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ usb-role-switch;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ status = "okay";
+
+ port {
+ usb2_drd_sw: endpoint {
+ remote-endpoint = <&typec2_dr_sw>;
+ };
+ };
+};
+
+&usdhc1 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ status = "okay";
+};
+
+&usdhc2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+ no-mmc;
+ no-sdio;
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX91_PAD_ENET1_MDC__ENET1_MDC 0x57e
+ MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
+ MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
+ MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
+ MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
+ MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
+ MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x5fe
+ MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
+ MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
+ MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x57e
+ MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
+ MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
+ MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe
+ MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_eqos_sleep: eqossleepgrp {
+ fsl,pins = <
+ MX91_PAD_ENET1_MDC__GPIO4_IO0 0x31e
+ MX91_PAD_ENET1_MDIO__GPIO4_IO1 0x31e
+ MX91_PAD_ENET1_RD0__GPIO4_IO10 0x31e
+ MX91_PAD_ENET1_RD1__GPIO4_IO11 0x31e
+ MX91_PAD_ENET1_RD2__GPIO4_IO12 0x31e
+ MX91_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ MX91_PAD_ENET1_RXC__GPIO4_IO9 0x31e
+ MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 0x31e
+ MX91_PAD_ENET1_TD0__GPIO4_IO5 0x31e
+ MX91_PAD_ENET1_TD1__GPIO4_IO4 0x31e
+ MX91_PAD_ENET1_TD2__GPIO4_IO3 0x31e
+ MX91_PAD_ENET1_TD3__GPIO4_IO3 0x31e
+ MX91_PAD_ENET1_TXC__GPIO4_IO7 0x31e
+ MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 0x31e
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX91_PAD_ENET2_MDC__ENET2_MDC 0x57e
+ MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x57e
+ MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x57e
+ MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x57e
+ MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x57e
+ MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x57e
+ MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x5fe
+ MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e
+ MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x57e
+ MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x57e
+ MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x57e
+ MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x57e
+ MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x5fe
+ MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x57e
+ >;
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins = <
+ MX91_PAD_ENET2_MDC__GPIO4_IO14 0x51e
+ MX91_PAD_ENET2_MDIO__GPIO4_IO15 0x51e
+ MX91_PAD_ENET2_RD0__GPIO4_IO24 0x51e
+ MX91_PAD_ENET2_RD1__GPIO4_IO25 0x51e
+ MX91_PAD_ENET2_RD2__GPIO4_IO26 0x51e
+ MX91_PAD_ENET2_RD3__GPIO4_IO27 0x51e
+ MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e
+ MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 0x51e
+ MX91_PAD_ENET2_TD0__GPIO4_IO19 0x51e
+ MX91_PAD_ENET2_TD1__GPIO4_IO18 0x51e
+ MX91_PAD_ENET2_TD2__GPIO4_IO17 0x51e
+ MX91_PAD_ENET2_TD3__GPIO4_IO16 0x51e
+ MX91_PAD_ENET2_TXC__GPIO4_IO21 0x51e
+ MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 0x51e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO25__CAN2_TX 0x139e
+ MX91_PAD_GPIO_IO27__CAN2_RX 0x139e
+ >;
+ };
+
+ pinctrl_flexcan2_sleep: flexcan2sleepgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO25__GPIO2_IO25 0x31e
+ MX91_PAD_GPIO_IO27__GPIO2_IO27 0x31e
+ >;
+ };
+
+ pinctrl_lcdif_gpio: lcdifgpiogrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO00__GPIO2_IO0 0x51e
+ MX91_PAD_GPIO_IO01__GPIO2_IO1 0x51e
+ MX91_PAD_GPIO_IO02__GPIO2_IO2 0x51e
+ MX91_PAD_GPIO_IO03__GPIO2_IO3 0x51e
+ >;
+ };
+
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x31e
+ MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x31e
+ MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x31e
+ MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x31e
+ MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 0x31e
+ MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 0x31e
+ MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 0x31e
+ MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 0x31e
+ MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 0x31e
+ MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 0x31e
+ MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 0x31e
+ MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 0x31e
+ MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 0x31e
+ MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 0x31e
+ MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x31e
+ MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x31e
+ MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x31e
+ MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x31e
+ MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x31e
+ MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x31e
+ MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x31e
+ MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x31e
+ MX91_PAD_GPIO_IO27__GPIO2_IO27 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ MX91_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
+ MX91_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
+ MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pcal6524: pcal6524grp {
+ fsl,pins = <
+ MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
+ >;
+ };
+
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX91_PAD_PDM_CLK__PDM_CLK 0x31e
+ MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x31e
+ MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x31e
+ >;
+ };
+
+ pinctrl_pdm_sleep: pdmsleepgrp {
+ fsl,pins = <
+ MX91_PAD_PDM_CLK__GPIO1_IO8 0x31e
+ MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 0x31e
+ MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
+ MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
+ MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x31e
+ MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x31e
+ >;
+ };
+
+ pinctrl_sai1_sleep: sai1sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SAI1_TXC__GPIO1_IO12 0x51e
+ MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x51e
+ MX91_PAD_SAI1_TXD0__GPIO1_IO13 0x51e
+ MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x51e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e
+ MX91_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e
+ MX91_PAD_GPIO_IO17__SAI3_MCLK 0x31e
+ MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 0x31e
+ MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 0x31e
+ >;
+ };
+
+ pinctrl_sai3_sleep: sai3sleepgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO26__GPIO2_IO26 0x51e
+ MX91_PAD_GPIO_IO16__GPIO2_IO16 0x51e
+ MX91_PAD_GPIO_IO17__GPIO2_IO17 0x51e
+ MX91_PAD_GPIO_IO19__GPIO2_IO19 0x51e
+ MX91_PAD_GPIO_IO20__GPIO2_IO20 0x51e
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO22__SPDIF_IN 0x31e
+ MX91_PAD_GPIO_IO23__SPDIF_OUT 0x31e
+ >;
+ };
+
+ pinctrl_spdif_sleep: spdifsleepgrp {
+ fsl,pins = <
+ MX91_PAD_GPIO_IO22__GPIO2_IO22 0x31e
+ MX91_PAD_GPIO_IO23__GPIO2_IO23 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX91_PAD_UART1_RXD__LPUART1_RX 0x31e
+ MX91_PAD_UART1_TXD__LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX91_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX91_PAD_SD1_CLK__USDHC1_CLK 0x1582
+ MX91_PAD_SD1_CMD__USDHC1_CMD 0x1382
+ MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x1382
+ MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1382
+ MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x1382
+ MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1382
+ MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1382
+ MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1382
+ MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1382
+ MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1382
+ MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CD_B__GPIO3_IO0 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__USDHC2_CLK 0x1582
+ MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382
+ MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1382
+ MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x1382
+ MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x1382
+ MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x1382
+ MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD2_CLK__GPIO3_IO1 0x51e
+ MX91_PAD_SD2_CMD__GPIO3_IO2 0x51e
+ MX91_PAD_SD2_DATA0__GPIO3_IO3 0x51e
+ MX91_PAD_SD2_DATA1__GPIO3_IO4 0x51e
+ MX91_PAD_SD2_DATA2__GPIO3_IO5 0x51e
+ MX91_PAD_SD2_DATA3__GPIO3_IO6 0x51e
+ MX91_PAD_SD2_VSELECT__GPIO3_IO19 0x51e
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX91_PAD_SD3_CMD__USDHC3_CMD 0x138e
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x138e
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x138e
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x138e
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x138e
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX91_PAD_SD3_CMD__USDHC3_CMD 0x13fe
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX91_PAD_SD3_CMD__USDHC3_CMD 0x1382
+ MX91_PAD_SD3_DATA0__USDHC3_DATA0 0x1382
+ MX91_PAD_SD3_DATA1__USDHC3_DATA1 0x1382
+ MX91_PAD_SD3_DATA2__USDHC3_DATA2 0x1382
+ MX91_PAD_SD3_DATA3__USDHC3_DATA3 0x1382
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+ fsl,pins = <
+ MX91_PAD_SD3_CLK__GPIO3_IO20 0x31e
+ MX91_PAD_SD3_CMD__GPIO3_IO21 0x31e
+ MX91_PAD_SD3_DATA0__GPIO3_IO22 0x31e
+ MX91_PAD_SD3_DATA1__GPIO3_IO23 0x31e
+ MX91_PAD_SD3_DATA2__GPIO3_IO24 0x31e
+ MX91_PAD_SD3_DATA3__GPIO3_IO25 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3_wlan: usdhc3wlangrp {
+ fsl,pins = <
+ MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
+ >;
+ };
+};
--
2.37.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
` (2 preceding siblings ...)
2025-01-21 7:40 ` [PATCH v4 3/5] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support Joy Zou
@ 2025-01-21 7:40 ` Joy Zou
2025-01-21 7:50 ` Krzysztof Kozlowski
2025-01-21 7:40 ` [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier Joy Zou
2025-01-21 7:49 ` [PATCH v4 0/5] Add i.MX91 platform support Krzysztof Kozlowski
5 siblings, 1 reply; 20+ messages in thread
From: Joy Zou @ 2025-01-21 7:40 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
From: Pengfei Li <pengfei.li_1@nxp.com>
Enable i.MX91 pinctrl driver for booting the system
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 246a13412bf0..b16c924fd8aa 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -598,6 +598,7 @@ CONFIG_PINCTRL_IMX8QM=y
CONFIG_PINCTRL_IMX8QXP=y
CONFIG_PINCTRL_IMX8DXL=y
CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX91=y
CONFIG_PINCTRL_IMX93=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_IPQ5018=y
--
2.37.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
` (3 preceding siblings ...)
2025-01-21 7:40 ` [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl Joy Zou
@ 2025-01-21 7:40 ` Joy Zou
2025-01-21 7:49 ` Krzysztof Kozlowski
2025-01-21 7:49 ` [PATCH v4 0/5] Add i.MX91 platform support Krzysztof Kozlowski
5 siblings, 1 reply; 20+ messages in thread
From: Joy Zou @ 2025-01-21 7:40 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
Making the references easier, so add labels.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
arch/arm64/boot/dts/freescale/imx93.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 56766fdb0b1e..4739e7cb7e9b 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -206,7 +206,7 @@ cpu_crit: cpu-crit {
};
cooling-maps {
- map0 {
+ map0: map0 {
trip = <&cpu_alert>;
cooling-device =
<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -1334,7 +1334,7 @@ usbmisc2: usbmisc@4c200200 {
#index-cells = <1>;
};
- ddr-pmu@4e300dc0 {
+ ddr_pmu: ddr-pmu@4e300dc0 {
compatible = "fsl,imx93-ddr-pmu";
reg = <0x4e300dc0 0x200>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
--
2.37.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier
2025-01-21 7:40 ` [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier Joy Zou
@ 2025-01-21 7:49 ` Krzysztof Kozlowski
2025-01-21 8:25 ` [EXT] " Joy Zou
0 siblings, 1 reply; 20+ messages in thread
From: Krzysztof Kozlowski @ 2025-01-21 7:49 UTC (permalink / raw)
To: Joy Zou, robh, krzk+dt, conor+dt, shawnguo, s.hauer,
catalin.marinas, will, kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
On 21/01/2025 08:40, Joy Zou wrote:
> Making the references easier, so add labels.
>
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx93.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 56766fdb0b1e..4739e7cb7e9b 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -206,7 +206,7 @@ cpu_crit: cpu-crit {
> };
>
> cooling-maps {
> - map0 {
> + map0: map0 {
> trip = <&cpu_alert>;
> cooling-device =
> <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> @@ -1334,7 +1334,7 @@ usbmisc2: usbmisc@4c200200 {
> #index-cells = <1>;
> };
>
> - ddr-pmu@4e300dc0 {
> + ddr_pmu: ddr-pmu@4e300dc0 {
Useless commit - there are no users.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 0/5] Add i.MX91 platform support
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
` (4 preceding siblings ...)
2025-01-21 7:40 ` [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier Joy Zou
@ 2025-01-21 7:49 ` Krzysztof Kozlowski
2025-01-21 8:35 ` [EXT] " Joy Zou
5 siblings, 1 reply; 20+ messages in thread
From: Krzysztof Kozlowski @ 2025-01-21 7:49 UTC (permalink / raw)
To: Joy Zou, robh, krzk+dt, conor+dt, shawnguo, s.hauer,
catalin.marinas, will, kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
On 21/01/2025 08:40, Joy Zou wrote:
>
> Change for v2:
> - change ddr node pmu comaptible
> - remove mu1 and mu2
> - change iomux node compatible and enable 91 pinctrl
> - refine commit message for patch #2
> - change hex to lowercase in pinfunc.h
> - ordering nodes with the dt-format tool
>
> Joy Zou (1):
> arm64: dts: imx93: Add labels for the references easier
>
> Pengfei Li (4):
> dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
> arm64: dts: freescale: Add i.MX91 dtsi support
> arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
Why do you use entierly different prefixes?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl
2025-01-21 7:40 ` [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl Joy Zou
@ 2025-01-21 7:50 ` Krzysztof Kozlowski
2025-01-21 10:32 ` [EXT] " Joy Zou
0 siblings, 1 reply; 20+ messages in thread
From: Krzysztof Kozlowski @ 2025-01-21 7:50 UTC (permalink / raw)
To: Joy Zou, robh, krzk+dt, conor+dt, shawnguo, s.hauer,
catalin.marinas, will, kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
On 21/01/2025 08:40, Joy Zou wrote:
> From: Pengfei Li <pengfei.li_1@nxp.com>
>
> Enable i.MX91 pinctrl driver for booting the system
That's really poor commit msg. You are changing common defconfig, not
your own. Booting system of what soc? What product? Why would we like to
have it, if there is no board with it?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
2025-01-21 7:40 ` [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board Joy Zou
@ 2025-01-21 7:52 ` Krzysztof Kozlowski
2025-01-21 8:13 ` Joy Zou
2025-01-21 8:19 ` [EXT] " Joy Zou
0 siblings, 2 replies; 20+ messages in thread
From: Krzysztof Kozlowski @ 2025-01-21 7:52 UTC (permalink / raw)
To: Joy Zou, robh, krzk+dt, conor+dt, shawnguo, s.hauer,
catalin.marinas, will, kernel, festevam
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, alexander.stein, m.othacehe, mwalle,
Max.Merchel, quic_bjorande, geert+renesas, dmitry.baryshkov,
neil.armstrong, arnd, nfraprado, devicetree, linux-kernel, imx,
linux-arm-kernel, ping.bai, ye.li, aisheng.dong, frank.li,
carlos.song
On 21/01/2025 08:40, Joy Zou wrote:
> From: Pengfei Li <pengfei.li_1@nxp.com>
>
> Add the board imx91-11x11-evk in the binding docuemnt.
>
> Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
Your SoB is missing. Carefully read submitting patches before posting
other people's work.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
2025-01-21 7:52 ` Krzysztof Kozlowski
@ 2025-01-21 8:13 ` Joy Zou
2025-01-21 8:19 ` [EXT] " Joy Zou
1 sibling, 0 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 8:13 UTC (permalink / raw)
To: Krzysztof Kozlowski, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2025年1月21日 15:53
> To: Joy Zou <joy.zou@nxp.com>; robh@kernel.org; krzk+dt@kernel.org;
> conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> catalin.marinas@arm.com; will@kernel.org; kernel@pengutronix.de;
> festevam@gmail.com
> Cc: joao.goncalves@toradex.com; marex@denx.de;
> hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> <peng.fan@nxp.com>; frieder.schrempf@kontron.de;
> alexander.stein@ew.tq-group.com; m.othacehe@gmail.com;
> mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: [EXT] Re: [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk
> board
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 21/01/2025 08:40, Joy Zou wrote:
> > From: Pengfei Li <pengfei.li_1@nxp.com>
> >
> > Add the board imx91-11x11-evk in the binding docuemnt.
> >
> > Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
>
> Your SoB is missing. Carefully read submitting patches before posting other
> people's work.
Thanks for your comments!
Sorry, I forget to explain sending other people patch.
The Pengfei Li will leave NXP, I have take over his affairs. So continue to send the patch set.
BR
Joy Zou
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [EXT] Re: [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
2025-01-21 7:52 ` Krzysztof Kozlowski
2025-01-21 8:13 ` Joy Zou
@ 2025-01-21 8:19 ` Joy Zou
1 sibling, 0 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 8:19 UTC (permalink / raw)
To: Krzysztof Kozlowski, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2025年1月21日 15:53
> To: Joy Zou <joy.zou@nxp.com>; robh@kernel.org; krzk+dt@kernel.org;
> conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> catalin.marinas@arm.com; will@kernel.org; kernel@pengutronix.de;
> festevam@gmail.com
> Cc: joao.goncalves@toradex.com; marex@denx.de;
> hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> <peng.fan@nxp.com>; frieder.schrempf@kontron.de;
> alexander.stein@ew.tq-group.com; m.othacehe@gmail.com;
> mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: [EXT] Re: [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk
> board
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 21/01/2025 08:40, Joy Zou wrote:
> > From: Pengfei Li <pengfei.li_1@nxp.com>
> >
> > Add the board imx91-11x11-evk in the binding docuemnt.
> >
> > Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
>
> Your SoB is missing. Carefully read submitting patches before posting other
> people's work.
Will add Signed-off-by in next patch version!
Thanks!
BR
Joy Zou
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [EXT] Re: [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier
2025-01-21 7:49 ` Krzysztof Kozlowski
@ 2025-01-21 8:25 ` Joy Zou
2025-01-21 9:04 ` Krzysztof Kozlowski
0 siblings, 1 reply; 20+ messages in thread
From: Joy Zou @ 2025-01-21 8:25 UTC (permalink / raw)
To: Krzysztof Kozlowski, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2025年1月21日 15:49
> To: Joy Zou <joy.zou@nxp.com>; robh@kernel.org; krzk+dt@kernel.org;
> conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> catalin.marinas@arm.com; will@kernel.org; kernel@pengutronix.de;
> festevam@gmail.com
> Cc: joao.goncalves@toradex.com; marex@denx.de;
> hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> <peng.fan@nxp.com>; frieder.schrempf@kontron.de;
> alexander.stein@ew.tq-group.com; m.othacehe@gmail.com;
> mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: [EXT] Re: [PATCH v4 5/5] arm64: dts: imx93: Add labels for the
> references easier
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 21/01/2025 08:40, Joy Zou wrote:
> > Making the references easier, so add labels.
> >
> > Signed-off-by: Joy Zou <joy.zou@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/imx93.dtsi | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > index 56766fdb0b1e..4739e7cb7e9b 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > @@ -206,7 +206,7 @@ cpu_crit: cpu-crit {
> > };
> >
> > cooling-maps {
> > - map0 {
> > + map0: map0 {
> > trip = <&cpu_alert>;
> > cooling-device =
> > <&A55_0
> THERMAL_NO_LIMIT
> > THERMAL_NO_LIMIT>, @@ -1334,7 +1334,7 @@ usbmisc2:
> usbmisc@4c200200 {
> > #index-cells = <1>;
> > };
> >
> > - ddr-pmu@4e300dc0 {
> > + ddr_pmu: ddr-pmu@4e300dc0 {
>
> Useless commit - there are no users.
Thanks for your comments!
Have used the labels in imx91.dtsi. The imx91.dtsi have included the imx93.dtsi.
BR
Joy Zou
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support
2025-01-21 7:40 ` [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support Joy Zou
@ 2025-01-21 8:33 ` Alexander Stein
2025-01-22 5:25 ` [EXT] " Joy Zou
0 siblings, 1 reply; 20+ messages in thread
From: Alexander Stein @ 2025-01-21 8:33 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, shawnguo, s.hauer, catalin.marinas, will,
kernel, festevam, Joy Zou
Cc: joao.goncalves, marex, hvilleneuve, hiago.franco, peng.fan,
frieder.schrempf, m.othacehe, mwalle, Max.Merchel, quic_bjorande,
geert+renesas, dmitry.baryshkov, neil.armstrong, arnd, nfraprado,
devicetree, linux-kernel, imx, linux-arm-kernel, ping.bai, ye.li,
aisheng.dong, frank.li, carlos.song
Am Dienstag, 21. Januar 2025, 08:40:14 CET schrieb Joy Zou:
> From: Pengfei Li <pengfei.li_1@nxp.com>
>
> The i.MX 91 family features an Arm Cortex-A55 running at up to
> 1.4GHz, support for modern LPDDR4 memory to enable platform longevity,
> along with a rich set of peripherals targeting medical, industrial
> and consumer IoT market segments.
>
> The design of the i.MX91 platform is very similar to i.MX93.
> The mainly difference between i.MX91 and i.MX93 is as follows:
> - i.MX91 removed some clocks and modified the names of some clocks.
> - i.MX91 only has one A core
> - i.MX91 has different pinmux
>
> Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770 ++++++++++++++++++
> arch/arm64/boot/dts/freescale/imx91.dtsi | 70 ++
> 2 files changed, 840 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
> create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
>
> [snip]
> diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
> new file mode 100644
> index 000000000000..67a5a487ab57
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +#include "imx91-pinfunc.h"
> +#include "imx93.dtsi"
> +
> +/delete-node/ &A55_1;
> +/delete-node/ &cm33;
> +/delete-node/ &mlmix;
> +/delete-node/ &mu1;
> +/delete-node/ &mu2;
> +
> +&clk {
> + compatible = "fsl,imx91-ccm";
> +};
> +
> +&eqos {
> + clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> + <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> + <&clk IMX91_CLK_ENET_TIMER>,
> + <&clk IMX91_CLK_ENET1_QOS_TSN>,
> + <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
> + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> + <&clk IMX91_CLK_ENET1_QOS_TSN>;
> + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
> +};
> +
> +&fec {
> + clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> + <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> + <&clk IMX91_CLK_ENET_TIMER>,
> + <&clk IMX91_CLK_ENET2_REGULAR>,
> + <&clk IMX93_CLK_DUMMY>;
> + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> + <&clk IMX91_CLK_ENET2_REGULAR>;
> + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
> + assigned-clock-rates = <100000000>, <250000000>;
> +};
> +
> +&i3c1 {
> + clocks = <&clk IMX93_CLK_BUS_AON>,
> + <&clk IMX93_CLK_I3C1_GATE>,
> + <&clk IMX93_CLK_DUMMY>;
> +};
> +
> +&i3c2 {
> + clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
> + <&clk IMX93_CLK_I3C2_GATE>,
> + <&clk IMX93_CLK_DUMMY>;
> +};
> +
> +&iomuxc {
> + compatible = "fsl,imx91-iomuxc";
> +};
> +
> +&tmu {
> + status = "disabled";
> +};
> +
> +&ddr_pmu {
> + compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
> +};
> +
> +&map0 {
> + cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +};
>
Somehow I don't like it that much. Instead of removing nodes from imx93.dtsi
wouldn't it make more sense to include from imx91.dtsi into imx93.dtsi
and _add_ nodes with are unique to i.MX93? Otherwise each add to imx93.dtsi
requires an remove in imx91.dtsi for this unique to i.MX93, e.g. NPU.
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [EXT] Re: [PATCH v4 0/5] Add i.MX91 platform support
2025-01-21 7:49 ` [PATCH v4 0/5] Add i.MX91 platform support Krzysztof Kozlowski
@ 2025-01-21 8:35 ` Joy Zou
0 siblings, 0 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 8:35 UTC (permalink / raw)
To: Krzysztof Kozlowski, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2025年1月21日 15:50
> To: Joy Zou <joy.zou@nxp.com>; robh@kernel.org; krzk+dt@kernel.org;
> conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> catalin.marinas@arm.com; will@kernel.org; kernel@pengutronix.de;
> festevam@gmail.com
> Cc: joao.goncalves@toradex.com; marex@denx.de;
> hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> <peng.fan@nxp.com>; frieder.schrempf@kontron.de;
> alexander.stein@ew.tq-group.com; m.othacehe@gmail.com;
> mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: [EXT] Re: [PATCH v4 0/5] Add i.MX91 platform support
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 21/01/2025 08:40, Joy Zou wrote:
> >
> > Change for v2:
> > - change ddr node pmu comaptible
> > - remove mu1 and mu2
> > - change iomux node compatible and enable 91 pinctrl
> > - refine commit message for patch #2
> > - change hex to lowercase in pinfunc.h
> > - ordering nodes with the dt-format tool
> >
> > Joy Zou (1):
> > arm64: dts: imx93: Add labels for the references easier
> >
> > Pengfei Li (4):
> > dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
> > arm64: dts: freescale: Add i.MX91 dtsi support
> > arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
>
>
> Why do you use entierly different prefixes?
Thanks for your comments!
The imx93 patch prefixes refer to the existing "arm64: dts: imx93:" prefixes.
The Pengfei uses "arm64: dts: freescale:" prefixes in imx91 patches, so change the imx91 patch
prefixes into "arm64: dts:imx91:"?
BR
Joy Zou
>
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [EXT] Re: [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier
2025-01-21 8:25 ` [EXT] " Joy Zou
@ 2025-01-21 9:04 ` Krzysztof Kozlowski
2025-01-21 9:22 ` Joy Zou
0 siblings, 1 reply; 20+ messages in thread
From: Krzysztof Kozlowski @ 2025-01-21 9:04 UTC (permalink / raw)
To: Joy Zou
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com, joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
On Tue, Jan 21, 2025 at 08:25:51AM +0000, Joy Zou wrote:
> > THERMAL_NO_LIMIT
> > > THERMAL_NO_LIMIT>, @@ -1334,7 +1334,7 @@ usbmisc2:
> > usbmisc@4c200200 {
> > > #index-cells = <1>;
> > > };
> > >
> > > - ddr-pmu@4e300dc0 {
> > > + ddr_pmu: ddr-pmu@4e300dc0 {
> >
> > Useless commit - there are no users.
> Thanks for your comments!
> Have used the labels in imx91.dtsi. The imx91.dtsi have included the imx93.dtsi.
That's patch 5/5 so I say: impossible.
Either you did not understand the commit or your patchset is
non-bisectable, so anyway that's wrong or fix your builds.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [EXT] Re: [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier
2025-01-21 9:04 ` Krzysztof Kozlowski
@ 2025-01-21 9:22 ` Joy Zou
0 siblings, 0 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 9:22 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com, joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2025年1月21日 17:04
> To: Joy Zou <joy.zou@nxp.com>
> Cc: robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org;
> shawnguo@kernel.org; s.hauer@pengutronix.de; catalin.marinas@arm.com;
> will@kernel.org; kernel@pengutronix.de; festevam@gmail.com;
> joao.goncalves@toradex.com; marex@denx.de; hvilleneuve@dimonoff.com;
> hiago.franco@toradex.com; Peng Fan <peng.fan@nxp.com>;
> frieder.schrempf@kontron.de; alexander.stein@ew.tq-group.com;
> m.othacehe@gmail.com; mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: Re: [EXT] Re: [PATCH v4 5/5] arm64: dts: imx93: Add labels for the
> references easier
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On Tue, Jan 21, 2025 at 08:25:51AM +0000, Joy Zou wrote:
> > > THERMAL_NO_LIMIT
> > > > THERMAL_NO_LIMIT>, @@ -1334,7 +1334,7 @@ usbmisc2:
> > > usbmisc@4c200200 {
> > > > #index-cells = <1>;
> > > > };
> > > >
> > > > - ddr-pmu@4e300dc0 {
> > > > + ddr_pmu: ddr-pmu@4e300dc0 {
> > >
> > > Useless commit - there are no users.
> > Thanks for your comments!
> > Have used the labels in imx91.dtsi. The imx91.dtsi have included the
> imx93.dtsi.
>
> That's patch 5/5 so I say: impossible.
>
> Either you did not understand the commit or your patchset is non-bisectable,
> so anyway that's wrong or fix your builds.
Thanks your comments!
I got it, the imx91 dtsi patch depends on imx93 patch, so need commit firstly the imx93 patch,
Otherwise, will build break. Will adjust the sequence in next patch version.
BR
Joy Zou
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [EXT] Re: [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl
2025-01-21 7:50 ` Krzysztof Kozlowski
@ 2025-01-21 10:32 ` Joy Zou
0 siblings, 0 replies; 20+ messages in thread
From: Joy Zou @ 2025-01-21 10:32 UTC (permalink / raw)
To: Krzysztof Kozlowski, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, alexander.stein@ew.tq-group.com,
m.othacehe@gmail.com, mwalle@kernel.org,
Max.Merchel@ew.tq-group.com, quic_bjorande@quicinc.com,
geert+renesas@glider.be, dmitry.baryshkov@linaro.org,
neil.armstrong@linaro.org, arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2025年1月21日 15:51
> To: Joy Zou <joy.zou@nxp.com>; robh@kernel.org; krzk+dt@kernel.org;
> conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> catalin.marinas@arm.com; will@kernel.org; kernel@pengutronix.de;
> festevam@gmail.com
> Cc: joao.goncalves@toradex.com; marex@denx.de;
> hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> <peng.fan@nxp.com>; frieder.schrempf@kontron.de;
> alexander.stein@ew.tq-group.com; m.othacehe@gmail.com;
> mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: [EXT] Re: [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 21/01/2025 08:40, Joy Zou wrote:
> > From: Pengfei Li <pengfei.li_1@nxp.com>
> >
> > Enable i.MX91 pinctrl driver for booting the system
>
> That's really poor commit msg. You are changing common defconfig, not your
> own. Booting system of what soc? What product? Why would we like to have
> it, if there is no board with it?
Thanks your comments!
Will modify the commit message according to your question.
BR
Joy Zou
>
> Best regards,
> Krzysztof
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [EXT] Re: [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support
2025-01-21 8:33 ` Alexander Stein
@ 2025-01-22 5:25 ` Joy Zou
2025-01-22 6:20 ` Alexander Stein
0 siblings, 1 reply; 20+ messages in thread
From: Joy Zou @ 2025-01-22 5:25 UTC (permalink / raw)
To: Alexander Stein, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, m.othacehe@gmail.com,
mwalle@kernel.org, Max.Merchel@ew.tq-group.com,
quic_bjorande@quicinc.com, geert+renesas@glider.be,
dmitry.baryshkov@linaro.org, neil.armstrong@linaro.org,
arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
> -----Original Message-----
> From: Alexander Stein <alexander.stein@ew.tq-group.com>
> Sent: 2025年1月21日 16:34
> To: robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org;
> shawnguo@kernel.org; s.hauer@pengutronix.de; catalin.marinas@arm.com;
> will@kernel.org; kernel@pengutronix.de; festevam@gmail.com; Joy Zou
> <joy.zou@nxp.com>
> Cc: joao.goncalves@toradex.com; marex@denx.de;
> hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> <peng.fan@nxp.com>; frieder.schrempf@kontron.de; m.othacehe@gmail.com;
> mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> quic_bjorande@quicinc.com; geert+renesas@glider.be;
> dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> nfraprado@collabora.com; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> Subject: [EXT] Re: [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi
> support
>
> Am Dienstag, 21. Januar 2025, 08:40:14 CET schrieb Joy Zou:
> > From: Pengfei Li <pengfei.li_1@nxp.com>
> >
> > The i.MX 91 family features an Arm Cortex-A55 running at up to 1.4GHz,
> > support for modern LPDDR4 memory to enable platform longevity, along
> > with a rich set of peripherals targeting medical, industrial and
> > consumer IoT market segments.
> >
> > The design of the i.MX91 platform is very similar to i.MX93.
> > The mainly difference between i.MX91 and i.MX93 is as follows:
> > - i.MX91 removed some clocks and modified the names of some clocks.
> > - i.MX91 only has one A core
> > - i.MX91 has different pinmux
> >
> > Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
> > Signed-off-by: Joy Zou <joy.zou@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770
> ++++++++++++++++++
> > arch/arm64/boot/dts/freescale/imx91.dtsi | 70 ++
> > 2 files changed, 840 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
> > create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
> >
> > [snip]
> > diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi
> > b/arch/arm64/boot/dts/freescale/imx91.dtsi
> > new file mode 100644
> > index 000000000000..67a5a487ab57
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
> > @@ -0,0 +1,70 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2024 NXP
> > + */
> > +
> > +#include "imx91-pinfunc.h"
> > +#include "imx93.dtsi"
> > +
> > +/delete-node/ &A55_1;
> > +/delete-node/ &cm33;
> > +/delete-node/ &mlmix;
> > +/delete-node/ &mu1;
> > +/delete-node/ &mu2;
> > +
> > +&clk {
> > + compatible = "fsl,imx91-ccm";
> > +};
> > +
> > +&eqos {
> > + clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> > + <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> > + <&clk IMX91_CLK_ENET_TIMER>,
> > + <&clk IMX91_CLK_ENET1_QOS_TSN>,
> > + <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
> > + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> > + <&clk IMX91_CLK_ENET1_QOS_TSN>;
> > + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> > + <&clk
> IMX93_CLK_SYS_PLL_PFD0_DIV2>; };
> > +
> > +&fec {
> > + clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> > + <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> > + <&clk IMX91_CLK_ENET_TIMER>,
> > + <&clk IMX91_CLK_ENET2_REGULAR>,
> > + <&clk IMX93_CLK_DUMMY>;
> > + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> > + <&clk IMX91_CLK_ENET2_REGULAR>;
> > + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> > + <&clk
> IMX93_CLK_SYS_PLL_PFD0_DIV2>;
> > + assigned-clock-rates = <100000000>, <250000000>; };
> > +
> > +&i3c1 {
> > + clocks = <&clk IMX93_CLK_BUS_AON>,
> > + <&clk IMX93_CLK_I3C1_GATE>,
> > + <&clk IMX93_CLK_DUMMY>; };
> > +
> > +&i3c2 {
> > + clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
> > + <&clk IMX93_CLK_I3C2_GATE>,
> > + <&clk IMX93_CLK_DUMMY>; };
> > +
> > +&iomuxc {
> > + compatible = "fsl,imx91-iomuxc"; };
> > +
> > +&tmu {
> > + status = "disabled";
> > +};
> > +
> > +&ddr_pmu {
> > + compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu"; };
> > +
> > +&map0 {
> > + cooling-device = <&A55_0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>; };
> >
>
> Somehow I don't like it that much. Instead of removing nodes from imx93.dtsi
> wouldn't it make more sense to include from imx91.dtsi into imx93.dtsi and
> _add_ nodes with are unique to i.MX93? Otherwise each add to imx93.dtsi
> requires an remove in imx91.dtsi for this unique to i.MX93, e.g. NPU.
>
Thanks for your comments!
The imx91 isn't the imx93 subset, so if the imx93.dtsi include the imx91.dtsi,
the same problem will occur.
If add common.dtsi for imx91 and imx93, then the imx93 and imx91 will include
the common.dtsi. What do you think of this approach?
BR
Joy Zou
> Best regards,
> Alexander
> --
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support
2025-01-22 5:25 ` [EXT] " Joy Zou
@ 2025-01-22 6:20 ` Alexander Stein
0 siblings, 0 replies; 20+ messages in thread
From: Alexander Stein @ 2025-01-22 6:20 UTC (permalink / raw)
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
catalin.marinas@arm.com, will@kernel.org, kernel@pengutronix.de,
festevam@gmail.com, Joy Zou
Cc: joao.goncalves@toradex.com, marex@denx.de,
hvilleneuve@dimonoff.com, hiago.franco@toradex.com, Peng Fan,
frieder.schrempf@kontron.de, m.othacehe@gmail.com,
mwalle@kernel.org, Max.Merchel@ew.tq-group.com,
quic_bjorande@quicinc.com, geert+renesas@glider.be,
dmitry.baryshkov@linaro.org, neil.armstrong@linaro.org,
arnd@arndb.de, nfraprado@collabora.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Jacky Bai, Ye Li, Aisheng Dong, Frank Li, Carlos Song
Am Mittwoch, 22. Januar 2025, 06:25:50 CET schrieb Joy Zou:
> > -----Original Message-----
> > From: Alexander Stein <alexander.stein@ew.tq-group.com>
> > Sent: 2025年1月21日 16:34
> > To: robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org;
> > shawnguo@kernel.org; s.hauer@pengutronix.de; catalin.marinas@arm.com;
> > will@kernel.org; kernel@pengutronix.de; festevam@gmail.com; Joy Zou
> > <joy.zou@nxp.com>
> > Cc: joao.goncalves@toradex.com; marex@denx.de;
> > hvilleneuve@dimonoff.com; hiago.franco@toradex.com; Peng Fan
> > <peng.fan@nxp.com>; frieder.schrempf@kontron.de; m.othacehe@gmail.com;
> > mwalle@kernel.org; Max.Merchel@ew.tq-group.com;
> > quic_bjorande@quicinc.com; geert+renesas@glider.be;
> > dmitry.baryshkov@linaro.org; neil.armstrong@linaro.org; arnd@arndb.de;
> > nfraprado@collabora.com; devicetree@vger.kernel.org;
> > linux-kernel@vger.kernel.org; imx@lists.linux.dev;
> > linux-arm-kernel@lists.infradead.org; Jacky Bai <ping.bai@nxp.com>; Ye Li
> > <ye.li@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Frank Li
> > <frank.li@nxp.com>; Carlos Song <carlos.song@nxp.com>
> > Subject: [EXT] Re: [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi
> > support
> >
> > Am Dienstag, 21. Januar 2025, 08:40:14 CET schrieb Joy Zou:
> > > From: Pengfei Li <pengfei.li_1@nxp.com>
> > >
> > > The i.MX 91 family features an Arm Cortex-A55 running at up to 1.4GHz,
> > > support for modern LPDDR4 memory to enable platform longevity, along
> > > with a rich set of peripherals targeting medical, industrial and
> > > consumer IoT market segments.
> > >
> > > The design of the i.MX91 platform is very similar to i.MX93.
> > > The mainly difference between i.MX91 and i.MX93 is as follows:
> > > - i.MX91 removed some clocks and modified the names of some clocks.
> > > - i.MX91 only has one A core
> > > - i.MX91 has different pinmux
> > >
> > > Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
> > > Signed-off-by: Joy Zou <joy.zou@nxp.com>
> > > ---
> > > arch/arm64/boot/dts/freescale/imx91-pinfunc.h | 770
> > ++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx91.dtsi | 70 ++
> > > 2 files changed, 840 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/freescale/imx91-pinfunc.h
> > > create mode 100644 arch/arm64/boot/dts/freescale/imx91.dtsi
> > >
> > > [snip]
> > > diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx91.dtsi
> > > new file mode 100644
> > > index 000000000000..67a5a487ab57
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
> > > @@ -0,0 +1,70 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Copyright 2024 NXP
> > > + */
> > > +
> > > +#include "imx91-pinfunc.h"
> > > +#include "imx93.dtsi"
> > > +
> > > +/delete-node/ &A55_1;
> > > +/delete-node/ &cm33;
> > > +/delete-node/ &mlmix;
> > > +/delete-node/ &mu1;
> > > +/delete-node/ &mu2;
> > > +
> > > +&clk {
> > > + compatible = "fsl,imx91-ccm";
> > > +};
> > > +
> > > +&eqos {
> > > + clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> > > + <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
> > > + <&clk IMX91_CLK_ENET_TIMER>,
> > > + <&clk IMX91_CLK_ENET1_QOS_TSN>,
> > > + <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
> > > + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> > > + <&clk IMX91_CLK_ENET1_QOS_TSN>;
> > > + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> > > + <&clk
> > IMX93_CLK_SYS_PLL_PFD0_DIV2>; };
> > > +
> > > +&fec {
> > > + clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> > > + <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
> > > + <&clk IMX91_CLK_ENET_TIMER>,
> > > + <&clk IMX91_CLK_ENET2_REGULAR>,
> > > + <&clk IMX93_CLK_DUMMY>;
> > > + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
> > > + <&clk IMX91_CLK_ENET2_REGULAR>;
> > > + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> > > + <&clk
> > IMX93_CLK_SYS_PLL_PFD0_DIV2>;
> > > + assigned-clock-rates = <100000000>, <250000000>; };
> > > +
> > > +&i3c1 {
> > > + clocks = <&clk IMX93_CLK_BUS_AON>,
> > > + <&clk IMX93_CLK_I3C1_GATE>,
> > > + <&clk IMX93_CLK_DUMMY>; };
> > > +
> > > +&i3c2 {
> > > + clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
> > > + <&clk IMX93_CLK_I3C2_GATE>,
> > > + <&clk IMX93_CLK_DUMMY>; };
> > > +
> > > +&iomuxc {
> > > + compatible = "fsl,imx91-iomuxc"; };
> > > +
> > > +&tmu {
> > > + status = "disabled";
> > > +};
> > > +
> > > +&ddr_pmu {
> > > + compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu"; };
> > > +
> > > +&map0 {
> > > + cooling-device = <&A55_0 THERMAL_NO_LIMIT
> > THERMAL_NO_LIMIT>; };
> > >
> >
> > Somehow I don't like it that much. Instead of removing nodes from imx93.dtsi
> > wouldn't it make more sense to include from imx91.dtsi into imx93.dtsi and
> > _add_ nodes with are unique to i.MX93? Otherwise each add to imx93.dtsi
> > requires an remove in imx91.dtsi for this unique to i.MX93, e.g. NPU.
> >
> Thanks for your comments!
> The imx91 isn't the imx93 subset, so if the imx93.dtsi include the imx91.dtsi,
> the same problem will occur.
> If add common.dtsi for imx91 and imx93, then the imx93 and imx91 will include
> the common.dtsi. What do you think of this approach?
Yes, it's not a 100% subset, number of CPUs and some clocks are different.
In general adding stuff in DT is easier than removing, especially
in DT overlays.
What you are removing or changing in imx91.dtsi would need to be added to
imx93.dtsi. A common .dtsi is also an option. I hope you can up with a
good name to not be associated with imx95.dtsi
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2025-01-22 6:20 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-01-21 7:40 [PATCH v4 0/5] Add i.MX91 platform support Joy Zou
2025-01-21 7:40 ` [PATCH v4 1/5] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board Joy Zou
2025-01-21 7:52 ` Krzysztof Kozlowski
2025-01-21 8:13 ` Joy Zou
2025-01-21 8:19 ` [EXT] " Joy Zou
2025-01-21 7:40 ` [PATCH v4 2/5] arm64: dts: freescale: Add i.MX91 dtsi support Joy Zou
2025-01-21 8:33 ` Alexander Stein
2025-01-22 5:25 ` [EXT] " Joy Zou
2025-01-22 6:20 ` Alexander Stein
2025-01-21 7:40 ` [PATCH v4 3/5] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support Joy Zou
2025-01-21 7:40 ` [PATCH v4 4/5] arm64: defconfig: enable i.MX91 pinctrl Joy Zou
2025-01-21 7:50 ` Krzysztof Kozlowski
2025-01-21 10:32 ` [EXT] " Joy Zou
2025-01-21 7:40 ` [PATCH v4 5/5] arm64: dts: imx93: Add labels for the references easier Joy Zou
2025-01-21 7:49 ` Krzysztof Kozlowski
2025-01-21 8:25 ` [EXT] " Joy Zou
2025-01-21 9:04 ` Krzysztof Kozlowski
2025-01-21 9:22 ` Joy Zou
2025-01-21 7:49 ` [PATCH v4 0/5] Add i.MX91 platform support Krzysztof Kozlowski
2025-01-21 8:35 ` [EXT] " Joy Zou
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).