From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vaibhav Hiremath Subject: Re: [PATCH v6 1/8] binding-doc: power: pwrseq-generic: add binding doc for generic power sequence library Date: Thu, 1 Sep 2016 13:33:22 +0530 Message-ID: <6832cc55-831a-1188-4878-bbbf0b3c3be8@linaro.org> References: <1471252398-957-1-git-send-email-peter.chen@nxp.com> <1471252398-957-2-git-send-email-peter.chen@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1471252398-957-2-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Peter Chen , gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org, ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, dwmw3-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org Cc: k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, arnd-r2nGTMty4D4@public.gmane.org, s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org, festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, oscar-Bdbr4918Nnnk1uMJSBkQmQ@public.gmane.org, stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org List-Id: devicetree@vger.kernel.org On Monday 15 August 2016 02:43 PM, Peter Chen wrote: > Add binding doc for generic power sequence library. > > Signed-off-by: Peter Chen > Acked-by: Philipp Zabel > Acked-by: Rob Herring > --- > .../bindings/power/pwrseq/pwrseq-generic.txt | 48 ++++++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt > > diff --git a/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt > new file mode 100644 > index 0000000..ebf0d47 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt > @@ -0,0 +1,48 @@ > +The generic power sequence library > + > +Some hard-wired devices (eg USB/MMC) need to do power sequence before > +the device can be enumerated on the bus, the typical power sequence > +like: enable USB PHY clock, toggle reset pin, etc. But current > +Linux device driver lacks of such code to do it, it may cause some > +hard-wired devices works abnormal or can't be recognized by > +controller at all. The power sequence will be done before this device > +can be found at the bus. > + > +The power sequence properties is under the device node. > + > +Optional properties: > +- clocks: the input clocks for device. > +- reset-gpios: Should specify the GPIO for reset. > +- reset-duration-us: the duration in microsecond for assert reset signal. > + > +Below is the example of USB power sequence properties on USB device > +nodes which have two level USB hubs. > + > +&usbotg1 { > + vbus-supply = <®_usb_otg1_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb_otg1_id>; > + status = "okay"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + genesys: hub@1 { > + compatible = "usb5e3,608"; > + reg = <1>; > + > + clocks = <&clks IMX6SX_CLK_CKO>; > + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ > + reset-duration-us = <10>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + asix: ethernet@1 { > + compatible = "usbb95,1708"; So I assume, with our recent discussion and the change we are proposing, the library would have some knowledge about this compatible string, right? what I was asking on other email was, how are you connecting multiple power sequence libraries to their respective consumers ? Thanks, Vaibhav > + reg = <1>; > + > + clocks = <&clks IMX6SX_CLK_IPG>; > + reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* ethernet_rst */ > + reset-duration-us = <15>; > + }; > + }; > +}; -- Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html